Used Indop Chp Unut Indop20To for sale (185)

Year of construction: 2025, condition: new, functionality: fully functional, Unused, brand new CHP unit with a TOYOTA 4Y engine, all-in-one design, employing a “plug and play” concept for easier and cost-effective installation, a user-friendly interface, a safety module for enhanced hardware protection, and a single-bearing generator to minimize potential engine damage. Iasdpfx Aozl H Ateixow This 20 kWe CHP unit is ideally suited for locations with a continuous demand for both electricity and heat. The key to CHP’s economic viability lies in utilizing the heat generated in conjunction with electricity production. Product location: Indop, d.o.o., Primorska 6a, 3325 Šoštanj, Slovenia.

Condition: used, Little used MAN Rollo model E3262 L232 CHP Plant fuelled by natural gas, made in 2022 with only 2000 hours of use! Engine manufacturer is MAN Rollo which is V12 configured with gross engine power output of 515 kW, 1500 RPM. The alternator is rated 415V, 3 phase and 50Hz. Iaedjzcwiajpfx Aixsw Output capacity is 435 kWel, 553 kWth.

Condition: excellent (used), Commonly used for Babyfoods, purées, sauces, cocktails, dysphasic meals, cleaning products etc. Ijdpeyzcvqefx Aixoaw

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Iedpfx Aszcng Aeixjaw Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Iaodpszcngcefx Aixew Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM Iajdpoyhc T Isfx Aixow - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.

Condition: used, Year of construction: 2008, Name: Used CHP Unit Manufacturer: SEnergie GmbH Type: G6.12TI Year built: 2008 Generator: NEWAGE STAMFORD Generator Type: UC.I274D2 Generator kW: 100 kW Fuel type: Sewage gas Electrical power: 80 kW Thermal power: 123 kW Ijdpfx Aiey Am Rnexeaw Efficiency: 88,9 % Dimensions: L 3.500 x W 1.100 x H 2.500 mm Empty weight: 3.000 kg Technical doc.: Yes Message: In 2018 a new engine was installed and the generator was rewound. Last service on October 15. 2021 with 86.102 hours. Accessories: A switch cabinet Condition: Second hand Price: On demand

Condition: used, Year of construction: 2005, operating hours: 140,000 h, functionality: limited functionality, Name: Used CHP Unit Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA 44.27/4 Generator kW: 132 kVA Fuel type: Sewage gas Electrical power: 53 kW Iajdpfx Aswyax Toixow Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56 kW Dimensions: L 3600 x W 950 x H 1750 mm Empty weight: 2200 kg Technical doc.: Yes Message: The Engine was changad in 2013 Condition: Used Price: On demand

Condition: used, Year of construction: 2005, operating hours: 140,000 h, Name: CHP used Manufacturer: Köhler / Ziegler Type: SY 53 GSM Year built: 2005 Generator: Leroy Somer Generator Type: LSA44.2S7/4 Generator kW: 132 kVA Turbo: No Iajdpswyaxgjfx Aixjw Fuel type: Sewage gas Electrical power: 53 kW Thermal power: 87 kW Driving force: MAN E0836 E302, 6 Zylinder, 56kW Dimensions: L 3.600 x W 950 x H 1.750 mm Empty weight: 2.200 kg Technical doc.: Yes Message: The engine was changed in 2013 Condition: Second hand Price: On demand

Year of construction: 2014, operating hours: 59,436 h, condition: ready for operation (used), functionality: fully functional, Buderus Loganova EN20 CHP unit – 19 kW electrical / 38 kW thermal – Year of manufacture 2014 For sale is a combined heat and power (CHP) unit from the manufacturer Buderus, type Loganova EN20, from a commercial property in Stuttgart. The unit will be decommissioned as part of an upgrade to the energy supply. Technical data: * Manufacturer: Buderus * Type: Loganova EN20 * Year of manufacture: 2014 * Electrical output: 19 kW * Thermal output: 38 kW * Operating hours: 59,436 h * Start cycles: 6,031 * Maintenance: Premium maintenance contract since commissioning Condition of the unit: The unit starts and runs up properly. Currently, there is a fault in the heat exchanger. According to initial assessment, the heating water pump is defective. The CHP unit is currently out of service. Iaedpfszd Uhhox Aixsw Location & Availability: Location: 70567 Stuttgart Planned decommissioning / dismantling: June–July 2026 Note: Regularly maintained unit with documented service history. Sale due to a unit upgrade. Inspection possible by appointment. If you are interested, we will gladly send you further information and photos.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, MWM Deutz TBDG 441 BV16, including generator for combined heat and power (CHP) plant, dual fuel, gas, diesel, year 1993. Spare parts also available for sale: turbocharger, injection pump, cylinder heads, crankshaft, etc. Iodpfx Aey Hmhbeixsaw 7 units of engines and generators available, AVK 6600V 173A 50Hz, control unit.

Condition: used, Year of construction: 2009, operating hours: 64,000 h, functionality: limited functionality, overall weight: 2,500 kg, fuel type: gas, motor manufacturer: MAN, Köhler & Ziegler MAN GAS Combined Heat and Power Plant (CHP) 54 kW - Leroy Somer Generator We are offering a Combined Heat and Power Plant (CHP) ⭐︎ Condition: The CHP unit is used but in good condition. ⭐︎ Condition: good (used) Fully operational and well maintained! Recently dismantled! The MAN E0834 E302 is a stationary natural gas aspirated engine primarily used in combined heat and power plants (CHP) for the simultaneous generation of electricity and heat. This four-stroke Otto gas engine features a compact design with four cylinders in-line. Manufacturer: Köhler & Ziegler, Germany Engine: - Manufacturer: MAN - Engine type: MAN E0834 E302 - Design: 4-cylinder in-line engine, water-cooled - 4.6 litre - 1500 rpm Generator - Manufacturer: Leroy Somer (Germany) - 90 kW - 3 phase 400 Volt - 50 Hertz - Operating hours: approx. 64,000 hours Iajdpfx Aey Rz N Ujixjw Dimensions: L:3100 mm x W: 1000 mm x H: 2000 mm Weight: approx. 2500 kg Condition: - Used – Good The generator was used in a publicly accessible building. Regular maintenance was carried out ⭐︎ Further technical data: see photos. Scope of delivery as shown Will be delivered as shown Inspection before purchase is possible and expressly encouraged. All our items are dismantled, cleaned, and visually checked for damages by our qualified personnel before sale. For all item-relevant data/information, please refer to the description and photos. All statements are made to the best of our knowledge and belief. The offered goods are sold as described and inspected. International buyers welcome Please inquire for shipping costs to Europe and overseas #2. Storage Shelf 44-1-8 Scope of delivery: - MAN GAS CHP unit 54 kW - With electrical control cabinet Shipping: - Nationwide transport within Germany is available for an additional charge - To provide an exact freight quote, please send me a request with your ZIP code

Condition: new, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 81159538275956, power: 275 kW (373.90 HP), number of cylinders: 12, rotational speed (min.): 1,500 rpm, overall weight: 1,763 kg, Available MAN based woodgas modules. Available quantity - 23 units. Never used (new) Under separate agreement for potential buyers we offer service of rebuilding these engines to natural gas or diesel specs. MAN V12X-2200  12 cylinders. 29,6 litres displacement  Bore 138 mm, stoke 165 mm  Power 1618 kW MAN V12X-2000  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1471 kW MAN V12-1900 Iaodpfx Aijxcudaoxow  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power 1397 kW MAN V12-1650-1800  12 cylinders. 24,2 litres displacement  Bore 128 mm, stoke 165 mm  Power V12-1650-1213kW, V12-1800-1324kW MAN V12-1550-1400  12 cylinders. 24,2 litres di  Bore 128 mm, stoke 165 mm  Power V12/1550-140KW-1213KW, V12/1400-1029KW MAN diesel engines for commercial shipping MAN D3872 (LIGHT, MEDIUM-DUTY OPERATION)  12 cylinders. 29,6 litres displacement  Bore 138 mm, stroke 165 mm  Power 1471 - 1618 kW / 1213 Kw MAN D2862 DUAL FUEL (MEDIUM DUTY OPERTAION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 794kW MAN D2862 (LIGHT, MEDIUM & HEAVY-DUTY OPERATION)  12 cylinders. 24,2 litres displacement  Bore 128 mm, stroke 157 mm  Power 1029-1471 kW / 749-1066kw / 551-735Kw MAN Auxiliary engines MAN D2862  12 cylinders. 24,24 litres displacement  Bore 128 mm, stroke 157 mm  Power 600-800kW

Condition: new, Year of construction: 2026, power: 180 kW (244.73 HP), number of cylinders: 12, cubic capacity: 25 cm³, nominal power: 200 kW (271.92 HP), Thermal output 320 kW Iasdpfx Aijy Urx Uoxow

Year of construction: 1995, condition: good (used), machine/vehicle number: 4202, Technical specifications: - Plate thickness up to 6 - 40 mm - Minimum pipe bevel diameter: 100 mm - Maximum bevel in a single pass: 10 mm - Working speed: 2.6 m/min - Power supply: 400 V / 2.2 kW - Space requirement: approx. W 550 x D 500 x H 700 mm Iaedpfxsd Af Shs Aixow - Weight: approx. 65 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 20, controller model: GE FANUC 15-MB / 4 axis, spindle speed (max.): 12,000 rpm, number of axes: 4, TECHNICAL DETAILS Number of axes: 4 Number of pallets: 7 Pallet size: 320 x 320 mm Number of tools: 96 Tool holder: ISO 40 Iedpjyhnc Uofx Aixsaw Max. spindle speed: 12,000 rpm MACHINE DETAILS Control: GE FANUC 15-MB / 4 axis Connection: 50 Hz 3x 380 V EQUIPMENT Coolant system Through-spindle coolant (IKZ) Tool breakage monitoring Chip conveyor Spindle cooling

Condition: good (used), CHP natural gas, 2 pieces Onsite Energy ME3042L3 Bj 2009, Engine: MTU E3042L9 year 2016 23.000h operating hours, Generator: LSA C47.2M7 C6/4 400V 50Hz 465KVA Absorber chiller: Carrier 16LJ-A24E 689KW cooling capacity Iasdpfsun I N Hjx Aixsw Emergency cooler: Güntner GFH 090.2B/2x2-M 12m chimney, silencer, pumps, actuators, dampers, valves, gas control system Higher-level control: synchronization, load management, island operation, grid support, ec , load control cabinets 714KWe, thermal 1058KW, cooling 689KW

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6125, We sell a used CEVISA beveling machine CHP-60G INV, MFG 2024, SN: 6125 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º Iodpfx Aiev Ef Ryoxoaw * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimeters, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 37.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 6119, We sell a used CEVISA beveling machine CHP-60G, MFG 2024, SN: 6119 Iedpfjv Ed N Iex Aixjaw 60 mm bevel length; capability in one run: 28 mm bevel length; bevel finish: machined (milling head); adjustable bevel speed depending on the material; optimum beveling speed: 500 mm/min; continual plate fixing pressure system: 4 Bar; 3 feeding rollers always in contact with the plate; 1 roller positioned in the cut-off point to insure: - no vibration; no noise; -smooth and unchanging finish; portable milling machine; mobile and stable; adjustable working height with pneumatic lifting system; electronic bevel adjustment; display: high precision; built-in adjustable bevel angles from 15º to 70º * Nominal thickness: from 10 mm to 100 mm. Motor: three-phase; motor power: 5 CV – 3.8 kW; voltage: 220/380 V. 50 Hz; 250/440 V. 60 Hz; 32 A plug, cable diameter: 2.5 millimetres, maximum consumption of the machine: max. 15A. Electric box with: thermomagnetic switch trip +emergency stop button, net weight: 800 kg; works height: adjustable from 760 to 940 mm; built-in trolley; bevel blueprint; plate beveling: K, V, X, and Y bevels, bevel speed: 0,5 m/min, three-phase motor: three phases and earth. no neutral, motor power: 5 hp - 3.8 kW, air flow rate 200 l/min. Electrical box: with under-voltage trip, emergency stop button, magneto-thermal protection; net weight of the beveling machine: 800kg, working height: adjustable from 760 to 940 millimeters. Integrated carriage. Price: 34.000 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. /Nous parlons français/Vorbim română

Condition: new, Year of construction: 2016, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, We are offering two new Totem 20 combined heat and power units (CHP) as well as a new Totem 10 CHP unit, year of manufacture 2016. These CHP units come from the liquidation of storage inventory. According to the previous owner, the units are eligible for CHP funding, as they have never been installed. However, this must be verified independently. The TOTEM 20 delivers a maximum output of 20 kW electrical and 48.5 kW thermal. The TOTEM 10 delivers a maximum output of 10 kW electrical and 25.2 kW thermal. For all further technical details, please refer to the uploaded datasheet and user manual. Depending on location, delivery within Germany or Austria can be arranged. Price negotiable. The new list price for a Totem 20 is currently approximately €57,000 (gross) and they are traded for €45,000 (see photo). We are offering you an unbeatable deal. If you have any questions or need more information, please feel free to send us a message or call us. We offer a start-up guarantee, meaning we will take the units back in the event of difficulties at start-up, but we do not cover any incurred costs. Iaedoytympspfx Aixjw

Condition: used, Year of construction: 2012, operating hours: 101,000 h, functionality: fully functional, machine/vehicle number: MAN E 0836 E 312, fuel type: gas, power: 48 kW (65.26 HP), output voltage: 400 V, output frequency: 50 Hz, Used BIOGAS CHP unit with protective cover. A cylinder head service was performed in 2023 at 81,000 operating hours. Iedpewmld Usfx Aixoaw

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: KOG 130, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 150 kW (203.94 HP), continuous power: 130 kW (176.75 HP), rotational speed (max.): 1,500 rpm, motor manufacturer: MAN, type of cooling: water, A cogeneration plant on wood biomass KOG130_00 with equipment was designed to convert solid fuel into gaseous fuel. In the process, the produced gas is cleaned and cooled, after which it is forwarded to the internal combustion engine of the cogeneration plant. Iaodoywgp Hepfx Aixew For solid fuel, natural wood chips of class G50-G100 are used. CHP line is equipped with containerized MAN UPB -L-W-E3262E302 Woodgas genset.

Condition: good (used), H. Köhler HK 300 S Condensation Water Test Device Manufacturer: H. Köhler GmbH Type: HK 300 S Machine Type: Condensation Water Test Device / Corrosion Test Chamber Test Chamber Volume: approx. 300 l For sale is a used H. Köhler HK 300 S condensation water test device. The device is suitable for condensation water climate tests according to DIN 50 017, corrosion tests, coating tests, paint tests, material testing, and quality assurance. Technical Data Test chamber volume: approx. 300 l Temperature range: Room temperature to approx. +55 °C Humidity range: Saturation operation possible Test chamber heating: 1,000 W Power connection: 230 V / 50 Hz Connected load: 1,000 W Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Dimensions (W x D x H): approx. 1,200 x 600 x 1,750 mm Weight: approx. 100 kg Control HK PC102 control unit LCD display Programmable test sequences Condensation water climate DIN 50 017 Manual operation / test operation Alarm display Equipment Stainless steel test chamber Large glass door with seal Test chamber thermometer Manometer Ventilation system Compressed air connection Deionized water connection Drain connection Stainless steel base with rollers Accessories as shown in the pictures Condition Iedpfozhadcex Aixoaw Used Optical condition as shown in the pictures. Display shows condensation water climate DIN 50 017. No documentation available. Scope of supply H. Köhler HK 300 S Condensation Water Test Device Stainless steel base Accessories as shown in the pictures Scope of supply as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 300 S Kesternich Corrosion Testing Unit Manufacturer: H. Köhler GmbH Type: HK 300 S Year of manufacture: unknown Machine type: Kesternich corrosion testing unit / SO₂ corrosion testing chamber Test chamber volume: approx. 300 l For sale is a used H. Köhler HK 300 S corrosion testing unit for performing Kesternich or SO₂ corrosion tests according to DIN 50017 / DIN EN ISO 6988. The unit is suitable for corrosion testing of metals, coatings, paints, and components in the laboratory, research, development, and quality assurance. Technical data Test chamber volume: approx. 300 l Temperature range: ambient temperature to approx. +55 °C Humidity operation: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption: approx. 3 Nm³/h Compressed air connection: 4.5 – 7.0 bar Demineralized water connection: 2.5 – 4.0 bar Spray pressure: 0.7 – 1.5 bar Dimensions (W × D × H): approx. 1,200 × 600 × 1,750 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test sequences Temperature control Equipment Stainless steel test chamber Large viewing window Iasdpfxjzg U Tie Aixjw Gas metering device Ventilation system Temperature control Test chamber thermometer Manometer Compressed air connection Demineralized water connection Exhaust connection Operating manual available Maintenance documents available EC declaration of conformity available Application areas Kesternich test SO₂ corrosion test Corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion testing unit Operating manual EC declaration of conformity Maintenance documents Documentation Accessories as shown in the pictures Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: good (used), H. Köhler HK 320 BF Kesternich Testing Device Manufacturer: H. Köhler KG Type: HK 320 BF Device Type: Kesternich Testing Device / Corrosion Testing Chamber Made in Germany Corrosion testing device for performing Kesternich tests under a sulfur dioxide-containing atmosphere to evaluate the corrosion behavior of materials and coatings. Technical Data Test chamber volume: approx. 300 liters Internal dimensions (W x D x H): approx. 725 x 500 x 750 mm External dimensions (W x D x H): approx. 1070 x 570 x 1970 mm including base frame Temperature range: Room temperature +5 °C to 60 °C Expandable to approx. 75 °C according to the manufacturer's specifications Power connection: 220 V / 50 Hz Power consumption: 1,000 W Compressed air supply: approx. 4.5 - 8 bar required Application Areas Corrosion testing Kesternich test according to the SO₂ method Coating testing Automotive industry Ijdpfjzclxvjx Aixsaw Material testing Quality assurance Research and development Equipment Stainless steel test chamber with viewing windows Large front door with locking mechanism Test specimen holders / frames SO₂ gas system Pressure gauge Manual controls Base frame with storage area External control and regulation unit Condition Used device from industrial application. Optical condition as shown in the pictures. Signs of wear and tear due to age and use. Test chamber and equipment are largely complete. Inspection possible by arrangement. Scope of supply: see pictures. Loading can be arranged. Errors and changes excepted.