Used Zi̇m Mühendislik Zim T 1210 for sale (71,286)

Year of construction: 2022, condition: new, ZIM T 1210 machine is designed to increase efficiency for production of manholes, conics and rings. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Gjdsirtdpepfx Ah Aoiw This machine can produce pipes 300mm – 1200mm diameter and 1000mm height. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There is mortar bunker and mortar filling cart on machines. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. The vibrator system specially designed by our R&D team is used in our machines. The cooling of the vibrators are done by oil cycle system. There is a special unit for that cycling process. Oil flow is controlled by special sensors. Thanks to this technology our machines which have been working for many years without any problems, stand out with their low operating costs. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Year of construction: 2022, condition: new, ZIM T1200 machine can produce pipes 300mm – 1200mm diameter and 500mm – 2500mm height by single, double and triple pressing. 150mm and 200mm pipes also can be produced for special demands. Machines can be designed semi or full automatic according to requirements. We use SIEMENS brand PLC microprocessors on automatic machines. There exists motrar bunker and motrar filling systems on machines. Produced materials can be carried to drying area with carriage carts or forklifts. Production is done on production pallets, Godpfx Asibbikeh Aeiw Materials up to 800mm diameter are carried to drying area with carriage carts, pipes bigger than 800 mm diameter can be carried with forklift. For fast production, pipes bigger than 300mm diameter also can carried to drying area with forklift. Machine makes production by hydraulic press and vibration. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. This system can be controlled electronically. Special designed strong chassi of the machine enables long live producing without errors.

Year of construction: 2026, condition: new, functionality: fully functional, ZIM BT 1200 machine is designed to increase efficiency for production of manhole base, parcel base products etc. It’s production capacity is very high when you compare with the ordinary machines. It has uniqe specifications to increase production capacity, using life, products quality. Gedpfx Ahsibywlo Ajiw The machine consistes of 3 different part. Pallet Stocking Robot, Vibration and Moulding Unit, Mortar Filling Cart. This machine can produce pipes 1200mm diameter and 1500mm height. This machine makes all the production full automatic and we use SIEMENS brand PLC microprocessors on it. There is mortar filling cart on machine. We use inner filling system for mortar filling cart and it makes equal and fast filling to moulds. There is a Pallet Stocking Robot system and it gives the pallets to the machine automatically. Production is done on production pallets, This production pallets should wait till the products dry and it takes around 24 hours if there is no curing system. The vibration system of machine is controlled by frequency driver controll system. It does not need any mechanic settings. It can easily adjusted from operator pannel. Special designed strong chassis of the machine enables long life production without errors. Produced materials can be carried to drying area with carriage carts or forklifts. The products can be carried to drying area with carriage carts or forklifts.

Condition: new, functionality: fully functional, color: white, overall weight: 25,000 kg, operation weight: 30,000 kg, Year of construction: 2024, machine/vehicle number: 15362024021, ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Our machine that can produce 15 blocks or 36 paverstones in one press, is designed to produce 1200-1400 pallets per day. Aiming at maximum capacity with mass production, our machine is designed to work non-stop! Our machine, which can follow the mortar in machine with the loadcell system in the bunkers, takes you to the next level with the proportional mortar car movement, and reaches the maximum quality with the mold balancing and pressing system, is a pioneer in the sector with its many hardwares! Giedpfx Asfnz Uzeh Ajw Our machine which uses pneumatic system in the mold connection system, can perform the mold change process in 15 minutes. For the mold changing process, the machine body is separated from the press side on the rails, and all body height adjustments are made automatically. We are using “ VIBROSTAR ” oil bathed vibration systems in our machine. The oil bathed vibrations are also cycling the oil automatically and we keep the vibration süper cool always! We use 6 engines and total 33kW energy. This vibration engines are shaft connected to our special vibration system. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service.

Condition: new, Year of construction: 2024, machine/vehicle number: 5182024016, Our ZIM 518 machine is an entry-level and investor-friendly machine designed for the production of double-layer paving stones. ZIM 518 comes out with low energy consumption, low investment cost and high return on investment. Our machine, which can produce 5 concrete blocks or 18 concrete paverstones in one press, is designed to produce 1000 pallets per day. However, if requested, it can also produce concrete curbstones of 1 meter length! To facilitate this production and increase quality; It has many features such as driver-controlled vibration system, special balancing system on the upper mold, and a specially designed vibration table. Our machine is designed as manual system and it is managed by the operator with a hydraulic unit and a joystick. Although it is a budget-friendly machine and can be installed within hours, our ZIM 518 machine enables the production of high quality paving stones. Our machine gives you a good position in the competition! We are using “ FULLDRIVE ” frequency controlled vibration systems in our machine. This helps the life cycle of vibration engines and also decreases the total electrical consumption of vibrators. This vibration system, which we have designed using our experience from our deep-rooted past, can work for many years without any malfunction and offers you the most efficient service. Giodoicap Tepfx Ah Asw

Condition: new, Year of construction: 2025, machine/vehicle number: 12302022104, ZIM 18 ULTIMATE is a high-capacity, fully automatic concrete block machine designed for industrial-scale, non-stop production. With CNC-machined body components for maximum precision, advanced automation options, and low labor requirements, it stands as one of the most durable and efficient solutions on the market. Compatible with Finger Car, U-Type, and L-Type systems, it integrates seamlessly into any high-output facility. Precision Engineering and High Efficiency Capable of producing 18 hollow blocks per cycle and 1400–1600 pallets per 8-hour shift, ZIM 18 delivers consistent high-volume output. Its entire machine body is processed on CNC machining centers, ensuring perfect alignment, zero tolerance errors, and unmatched stability even under heavy workloads. Advanced Mortar Feeding and Compaction Systems The machine features a loadcell-based mortar monitoring system, enabling precise control over mortar flow. Its proportional mortar carriage includes a highly advanced agitator system, ensuring that the mold is filled evenly and quickly. Combined with a 4-point mold balancing system and an electronic mold stopper system, the machine guarantees uniform block density and superior surface quality on every press. Fast and Automated Mold Change The pneumatic mold connection system allows mold changes in less than 15 minutes. The machine body is separated from the press unit via rails, and automatic body height calibration eliminates any manual adjustments, minimizing downtime and operator intervention. Giedofnz T Rspfx Ah Ajw VIBROSTAR Oil-Bath Vibration Technology ZIM 18 uses the VIBROSTAR oil-bath vibration system, designed for maximum cooling and continuous operation. With 6 shaft-connected vibration motors producing a total of 33 kW, the system ensures high-frequency, uniform compaction for exceptional block durability. This vibration unit, engineered with ZİM’s decades of expertise, is built to operate for years without malfunction, delivering unmatched performance and cost efficiency.

Year of construction: 2022, condition: new, ZIM 820 Concrete Pavers and Block machine can operated semi automatically with the control of the operator. Upon request, it can be manufactured fully automatic with PLC control. By changing moulds all kinds of pavers stone , curbs, block and precast concrete elements such as grass pavers series can be produced in a serial way. 20cm block can be produced 8 units in one press with the machine,or 20 interlock stones can be produced in a press. Machine is able to produce the insulated block upon demand. Gedpfx Ahoia N Ide Aeiw Our company’s special production vibrator is used. Thus, it can produce smoothly and quickly. Collector Robot (cuber) can be used to empty the dried products on the production pallets. A model with a single hopper, ZIM 8, is also available for manufacturing single layer bricks/pavers, hollow block, and for special blocks/pavers.

Year of construction: 2022, condition: new, ZIM A3600 machine can make concrete pipe, square culvert and other concrete materials between 800mm-3600mm diameter and 2000mm-3500mm lenght. Gjdpfeibbigsx Ah Aoiw In this machines mortar stocking and filling operations are done by mortar conveyor band with bunker. Materials which produced in this machine are transferred to drying area via crane. Our machine is making production on steel pallets. Produced material is carried to drying area with outer mould. After discharging the ready material to drying area, outer mold is movingto main machine for new production. Our Machine is working with hydraulic press and vibration systems. Vibration system of the machine is special design of ZIM Engineers. Vibration system which have oil cooling system and special oil unit. Special designed strong chassi of the machine enables long live producing without errors. Vibration table is made on high precision CNC machines.

Year of construction: 2022, condition: new, This system operates in automatic mode. The transfer of pallets between production line and curing area is carried out by Finger Car. 1 operator supervises the production process via control panel equipped with 4 different monitor, pc system. Automation system software has user-friendly interface and can be translated into customer’s preferred language. Production line requires the construction of curing chambers with racks. Steam curing is recommended for working in one shift and is mandatory for working in two shifts. Gsdpfx Asibcycoh Ajiw Transfer of production pallets with green products to the curing chambers as well as the transfer of pallets with cured products to the cubing station is carried out by automatic pallet transport system known as Finger Car. Finger car consists of lower and upper electric trolleys, which move along a set of rails built perpendicularly to the concrete block production line. The upper trolley has steel forks for grabbing and holding pallets. It transfers concrete products to the curing chambers, going inside each chamber to place pallets with wet products on racks to cure. On its way back it takes a stack of pallets with cured products and loads it into the lowerator. The price given as 1.200.000 USD includes all the machine equipments, concrete batching plant and 3000 pallet rack system. It is very special offer for August 2022!

Year of construction: 2022, condition: new, machine/vehicle number: 82002022104, ZIM 1025 PLUS Block and Paverstone Machine is special design machine for block and interlock production that works fully automatic.The movement of the machine is programmed the PLC microprocessor computer. By changing moulds all kinds of blocks, paverstones, curbstones, grass stones, lentos and precast concrete elements can be produced in a serial way. 20cm block can be produced 10, interlock paverstones can be produced 25 units in one press. Machine is able to produce the insulated block upon demand. Thanks to special features developed by our engineers machine have very short cycle time. For example mould changing is wery easy and take short tme in new system. Automation system and operator panel which is developed and redesigned in long years become user friendly and useful. With our special design vibration table you can produce high quality products with less energy. We use pneumatic bellows in machine mould connections, due to this system vibration on mould is expanded regular and uniform. Godpoifz Ahjfx Ah Aeiw Service and maintenance is easy thank to our strong machine chassis and ergonomic design

Condition: excellent (used), ZIM Hülsta Cabinet Erector The cabinet erector is used to erect and transport assembled cabinets. Cabinet erectors are typically used with cabinet presses that have a continuous feed system. It facilitates the handling of large workpieces when erecting them. Transport and assembly device within a cabinet assembly line. Behind a continuous cabinet press, the pressed cabinets are laid on their backs using this device. This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Type: Cabinet Erector Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting surface: L x W 1000 x 900 mm Power supply: 3 x 400 V AC Connected load: 2 kW Financing through our bank is also available. komplett-konzept.leasingo.de Giedpfxsvdb Ixs Ah Ajw Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Filter system, clean air filter, fine filter, filter, compact filter, particulate filter, filter cassette -Manufacturer: AAF International, air filter type AstroCel ® II -Part No: 12-1210-0205 Godpfxjw U N Tus Ah Asiw -Front frame dimensions: 570x1170x110 mm, see photo type plate -Number: 2x air filters available -Price: per piece -Dimensions: 1170/110/H570 mm -Weight: 11 kg/piece

Condition: good (used), Aluminum table, aluminum work table -Material: Aluminum Gjdeb Rgyqepfx Ah Asiw -1x baseboard -2x plastic worktops -Dimensions: 1210/2010/H800 mm -Weight: 70 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 1,450 h, load capacity: 200 kg, empty load weight: 5,450 kg, fuel type: electric, JLG Toucan 1210. Year of manufacture: 2013. Working height: 12 meters. Lateral reach: 5.2 meters. Platform capacity: 200 kg. Weight: 5450 kg. 24-volt batteries with built-in 230-volt charger. In good working order. Gedsziwy Dspfx Ah Aeiw Video also available on WhatsApp. Price: net + 21% VAT or net for export.

Condition: ready for operation (used), Used Fanuc A16B-1210-0340 circuit board, 100% functional. Giodji D U Ahopfx Ah Asw

Condition: used, Year of construction: 2012, fuel type: electric, Lifting capacity: 200 kg Please contact Gebrauchtgeräte Center for more information Gisdpfx Ahjzfkf Eo Aow

Condition: used, Year of construction: 2012, fuel type: electric, Lifting capacity: 200 kg Please contact Gebrauchtgeräte Center for more information Gisdpozfkvqsfx Ah Aew

Condition: good (used), Year of construction: 2010, machine/vehicle number: 0 - 251 - 20 - 4507, functionality: fully functional, Due to a switch to solid wood processing, this machine has been used very little and is in good condition. Available for viewing in the workshop. Giodpfoxzp Uwex Ah Aew

Condition: used, Year of construction: 2013, fuel type: electric, Lifting capacity: 200 kg Giodpjzfn A Ujfx Ah Asw Please contact Gebrauchtgeräte Center for more information

Condition: excellent (used), axle configuration: 1 axle, first registration: 10/2003, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,600 mm, total length: 10,920 mm, total width: 2,600 mm, suspension: steel, color: other, Year of construction: 2003, Equipment: ABS, Tail lift: Dhollandia, tail lift XL9TRAC1139082067 = More information = Axle configuration Brakes: disc brakes Suspension: leaf suspension Rear axle: Double wheels; Steering; Tyre profile left inner: 45%; Tyre profile left outer: 45%; Tyre profile right outer: 45%; Tyre profile right outer: 45% Weights Empty weight: 7.960 kg Carrying capacity: 14.040 kg GVW: 22.000 kg Functional Make of bodywork: CARRIER VECTOR 1850 Condition Technical condition: very good Visual appearance: very good Identification Registration number: OH-02-JD = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A Gisdpfxsymr Dao Ah Aow

Condition: excellent (used), axle configuration: 1 axle, first registration: 09/2007, loading space length: 10,350 mm, loading space width: 2,480 mm, loading space height: 2,300 mm, total length: 11,060 mm, total width: 2,600 mm, wheelbase: 6,950 mm, color: other, Year of construction: 2007, XL9T0121007082197 Cool unit brand: Carrier = More information = Empty weight: 7.000 kg Carrying capacity: 15.000 kg GVW: 22.000 kg Make of bodywork: CARRIER VECTOR 1850MT Cooling engine: diesel and electric (13691 operating hours diesel; 28 electric) Technical condition: very good Visual appearance: very good Registration number: OJ-58-ZY = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. Gedpfxoymq Nuj Ah Aoiw When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2007, mast type: telescopic, fuel type: electric, Weights Empty weight: 5.300 kg Functional Lifting capacity: 200 kg Working height: 1.210 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max swing of arm in degrees: 375 Transport dimensions (LxWxH): 3,85x1,2x2,02 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: Toucan 1210 Year of build: 2007 Condition: Used Data: Max. working height: 12,10 m Platform height: 10,10 m Max. reach: 5,18 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,10 x 0,82 m Total dimensions LxWxH: 3,85 x 1,20 x 2,02 m Transport position LxH: 3,85 x 2.02 m Swivel range: 345° Movable up to working height: 12,10 m Ground clearance: 0,03 m Gijdpfxev Ti N Ao Ah Ajw Drive type: Battery Empty weight: 5.300 kg Special features: white tires, approved for outdoor use by only 1 person, basket arm telescopic. Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x3400x1900 mm Weight 8000 kg Gsdpfx Ahev A Hi Ej Aoiw Total power requirement 48 kw

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Pre-milling aggregate Glue station for granulate Pneumatic pre-cut guillotine Trimming unit with two saw blades Profiling milling unit with profile cutters Profile scraper Polishing units Year of manufacture: 2009 Machine length: 3.7 m Gsdpfx Ahsx I A Duj Asiw

Condition: like new (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: three-phase, We are offering our test and demonstration machine from our Solution Center for sale. Additional machines are available—please feel free to contact us for details. Leitz | PMM 12106 with PH10 and SP25 Scanning System Refurbished coordinate measuring machine featuring the latest Renishaw technology Modernized in 2021 Measuring range XYZ: 1200 x 1000 x 600 mm Measurement uncertainty MPE (E0): 1.2 + L/400 in µm Equipment: - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system on all axes Gisdsvxh Dijpfx Ah Asw - Renishaw PH10 motorized indexing head with SP25-2 scanning system, including FCR25-L6 (6 port) probe changer - MODUS metrology software, latest version, with CAD import (STEP format), including 1-year software maintenance - PC system with Windows 10 and two new 27" TFT monitors, height-adjustable desk included - Control cabinet with state-of-the-art safety features - M6 base plate We are happy to customize the configuration to meet your requirements. Machine sales and service only available within Germany! Optional service packages upon request: Free curbside delivery | Commissioning | Inspection | Accuracy certification according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Additional options and configurations available upon request