3D Printer

Markforged X7

Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade manufacturing fixtures, jaws, tooling, jigs and end-use parts.  Designed for use in production, it prints parts that are stronger than machined aluminum,  at a fraction of the cost.  It combines the best surface quality, build size and reliability.  Speed up production with Turbo Print and verify dimensional accuracy with Blacksmith adaptive manufacturing technology, available only on the X7. Technical specifications: Printer features Process: Fused filament fabrication, continuous fiber reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100-240 VAC, 150 W (2 A peak) Ledpfx Ajvvldujdtork RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available Fibers: Carbon fiber, Carbon fiber FR, Glass fiber, Aramid fiber (Kevlar®), HSHT glass fiber Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Filling: closed cell filling: multiple geometries available Software Eiger Cloud: Slicing, parts and build job management (other options at additional cost) Security: 2-factor authentication, Org Admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 On sale from Location Condition: used Scope of delivery: (see pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 started remaining filament rolls of Onyx (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc. Lrsdpfx Aeu A U Utodtsk

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21450012211002129, Year of construction: 2024, operating hours: 2,262 h, construction height: 200 mm, construction width: 270 mm, working length: 330 mm, Equipment: CE marking, Hardly used showroom machine with very few operating hours! TECHNICAL DETAILS Build volume: 330 mm x 270 mm x 200 mm Layer height: from 50 µm Precision X, Y: 150 µm MACHINE DETAILS Technology: FFF + CFR (Continuous Fiber Reinforcement) Lodpfjxu E Srjx Adtork Compatible materials: Onyx, Onyx FR, Onyx ESD, Nylon White, Carbon fiber, Glass fiber, Kevlar, HSHT Operating hours: 2,262 h EQUIPMENT Eiger software (cloud and local) Connections: Ethernet, Wi-Fi, USB Material dry box for safe storage Continuous fiber reinforcement: carbon fiber, glass fiber, Kevlar Enclosed build area for optimal thermal stability High-resolution optical encoders Prepared for Blacksmith (automatic dimensional calibration) Certificates: CE, FCC, UL, UKCA

Condition: used, D-6886-Delford Type SP 800 Lodoc Nlxpspfx Adtsrk Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Year of construction: 1986, condition: good (used), Technical Details : Products - - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min Lrodod H Ur Aspfx Adtjk

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; Lodpfx Adsvxwkfstork frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, cutting width (max.): 800 mm, insertion depth: 800 mm, insertion height: 150 mm, cutting length (max.): 800 mm, overall weight: 500 kg, type of input current: three-phase, total width: 160 mm, total length: 200 mm, input voltage: 400 V, Equipment: documentation/manual, safety light barrier, The MOHR 80 cutter is engineered for single-shift operation and features a precise, gentle swing cut actuated hydraulically, allowing the dwell time of the knife at the lower dead point to be tailored to the material. The ultra-smooth stainless-steel table, fitted with air jets, makes material handling effortless. Clamping pressure is infinitely adjustable via a scaled rotary knob to accommodate a wide range of cutting materials. High-visibility LEDs clearly indicate the cutting line for the operator. Operation is carried out through an ergonomically positioned 18.5’’ touch-screen display. The machine can store up to 1,998 cutting programs for rapid recall and flexible adaptation of recurring sequences. Integrated into a digital workflow, cutting data can be received directly from pre-press into Compucut® in ppf- or jdf-format, which then automatically generates the appropriate cutting program. A barcode reader enables automatic program retrieval and execution, effectively reducing set-up times to nearly zero. Process visualization graphically displays material handling, significantly minimizing error risk. To further optimize cutting quality, the pre-clamping time can be adjusted based on the material being processed. Key features: Ledexwnxgopfx Adtjrk - Barcode reader for automatic creation and loading of assigned cutting programs via Compucut® - Process visualization for graphical representation of material handling, minimizing error risk - Rigid machine frame engineered for optimal stability, maximizing absorption of cutting forces and ensuring superior cutting accuracy - Minimal maintenance requirements thanks to the use of advanced materials Technical specifications: - Cutting width: 800 mm (31.49 in) - Feeding depth: 800 mm (31.49 in) - Maximum feeding height: 100 mm (3.93 in) - Clamping pressure: minimum 180 daN (397 lbs), maximum 2,700 daN (5,953 lbs) - Backgauge speed (return): up to 130 mm/sec (5.12 in/sec) - Minimum automatic cut without false plate: 15 mm (0.60 in) - Minimum automatic cut with false plate: 50 mm (1.96 in) - Dimensions (W × D × H): 1,430 × 1,970 × 1,500 mm (56.29 × 77.55 × 59.05 in)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Lodpfxjrq Ebfs Adtork Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Year of construction: 2006, condition: like new (used), Container volume 32 m3 Lsdefhb Tkepfx Adtsrk

Condition: excellent (used), machine/vehicle number: E264C930028, Pro C5110s Output Speed (Letter): 80 ppm Maximum Monthly Volume: Up to 150,000 Duty Cycle: Up to 300,000 Power Requirements: 208-240V, 60Hz, 12A (dedicated) Maximum Power Consumption: 2,400W 2,200-Sheet Large Capacity Tray supports paper sizes up to 13" x 19.2" with a straight paper path for reliable feeding of up to 110 lb. Cover stock (300 gsm). Finisher SR4090 3,000-Sheet Finisher offers multi-position stapling for up to 65 sheets of 8.5" x 11"/A4 media. Ideal for operations requiring collated and stapled document sets. Cover Interposer Tray CI4010 Single Cover Interposer Tray enables easy feeding of pre-printed covers and inserts into the finishing process at the push of a button. This option eliminates the need for slow, manual offline cover insertion and reduces wear on originals. Lrsdpjyf Exbofx Adtok Fiery Color Controller E-22B The optional Fiery E-22B Color Controller can be combined with the standard Print/Scan controller to provide basic scan features and Fiery print capabilities. Power Requirements: 120V, 50/60Hz, 15A