CNC Machining Center

Matec 30HV

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° Fgjdpfx Aszyy Rmoggog - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: good (used), functionality: unexamined, travel distance X-axis: 4,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,700 mm, total length: 12,000 mm, total width: 7,000 mm, table width: 1,000 mm, table length: 4,800 mm, rotary table diameter: 630 mm, overall weight: 25,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 60, mount diameter: 40 mm, Equipment: chip conveyor, MATEC 30 HV Universal Machining Center - Year of manufacture: presumably 2006 - Tool holder: SK 40 - Table with 9 T-slots - Incl. swiveling head: 360° - Incl. chip conveyor, coolant system, and safety fence Please note: the hydraulic clamping systems shown in the photos are not included in the scope of delivery! Please note: the machine can be transported on a standard truck! FCA D-72589 Westerheim - loaded onto a truck Fgsdpfx Agszxzf Aogjg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 31,189 h, spindle speed (max.): 15,000 rpm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426/430PB, number of slots in tool magazine: 36, number of axes: 3, This 3-axis Matec HV30 was manufactured in 2004. It features an X-axis travel of 2,000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a Heidenhain TNC 426/430PB control and a maximum spindle speed of 15,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec HV30 universal machining centre we have for sale. Contact us for further details. - Rotary Table Diameter: 800 mm- Axes: 3-axis (X/Y/Z)- Swivel head: ±110°, 1° indexed positioning- Head indexing: Incremental, 1° steps- Coolant / Compressed Air Supply: 40 bar through the spindle- Number of Spindles: 1- Tool Magazine Slots: 36- Input Power Type: Three-phase current- Additional Equipment & Features: D800mm rotary table installed, chip conveyor, paper band filter unit, documentation/manual, continuously variable speed Technical Specification Taper Size SK 40 Fjdpszvc Awefx Aggsgg

Condition: used, T-slot system: 18 H8, working spindle: SK40, length: 5000mm, width: 3240mm, height: 3800mm, basic machine weight: 17.5t, machine-on operating hours: 31,546h, control-on operating hours: 56,903h, program run time: 10,521h, with documentation. An on-site inspection is possible. Fgsdozun U Nopfx Aggjg

Condition: ready for operation (used), Year of construction: 2012, A Matec CNC machining center is offered. Travel X/Y: 3000mm/800mm, horizontal Z travel: 800mm, vertical Z travel: 700mm, B-axis: +/-105°, NC rotary table diameter: 800mm, rapid traverse: 30m/min, feed rate: 30m/min, spindle taper: SK40, max. spindle speed: 12000rpm, spindle power: 30kW, tool magazine: 60, operating hours (04.02.2026): 50106h, control system: Rexroth IndraMotion MTX with Siemens Operate. Machine dimensions X/Y/Z: approx. 7160mm/5400mm/3200mm, weight: approx. 15t. Expected to be available from the end of 2026. Documentation available. Inspection possible by prior arrangement. Fgodpfezka Nqex Aggog

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0397, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 9,000 rpm, table length: 2,500 mm, table width: 850 mm, coolant supply: 20 bar, Equipment: documentation/manual, Well-maintained MATEC 30HV with various features: automatic B-axis +/-90 degrees with 1-degree division integrated NC rotary table, diameter 630mm Heidenhain TNC426 with electronic handwheel internal coolant supply with paper band filter (20 bar) tool magazine with 36 positions spindle hours: 13,000h suitable for SK40 Fgjdszt Iztepfx Aggjg compressed air to the external nozzles chip conveyor with integrated coolant system (discharge height: approx. 850mm) chip flushing gun tool probe for tool measurement center partition available complete enclosure of the work area with a roof Bellows are new Lifting cylinder was renewed in 2026 Ball screw drive including nut, bearing, and coupling was renewed in 2025 The risk of dismantling and transport, as well as the costs of dismantling and transport, are entirely borne by the buyer. Inspection is possible by appointment.

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, controller manufacturer: Heidenhain, overall weight: 12,000 kg, coolant supply: 20 bar, number of slots in tool magazine: 36, Equipment: chip conveyor, documentation/manual, Manufacturer: MATEC Model: 30 HV Year of manufacture: 2005 Control system: Heidenhain iTNC 530 Technical data Travel in X: 3,000 mm Travel in Y: 800 mm Travel in Z: 800 mm Universal machining center with 4-axis swiveling head Fedpfxszq T Efo Aggegg Preparation for 5-axis machining with CNC rotary table Spindle speed: 20–9,000 rpm Tool holder: SK40 Tool magazine with 36 positions Spindle power: 30 kW Internal coolant supply at 20 bar Coolant tank with 450 liters and paper band filter Portable electronic handwheel Ethernet interface Chip conveyor Central lubrication Full enclosure with roof Preparation for wireless Renishaw 3D probe Partition for dual-station system Condition Tool changer completely overhauled Machine in good, well-maintained condition Ready for demonstration under power and immediately operational

Condition: good (used), Year of construction: 2004, operating hours: 31,189 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 426/430PB, rotary table diameter: 800 mm, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 36, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this well-maintained Matec matec-30 HV universal machining center, manufactured in 2004. Manufacturer: Matec Model: matec-30 HV Fodpfx Agjznduregegg Year of manufacture: 2004 Condition: good Category ID: 1463 Type ID: 4166 Machine type: Universal machining center 2000 x 800 x 800 mm (x y z) Installed rotary table D800mm Swiveling head, incremental indexing of +-110° 15,000 RPM, SK40, internal coolant 40 bar / compressed air through the spindle, tool magazine with 36 positions Heidenhain TNC 426/430PB The machine is being sold because we need space, and it is coming directly from our production. The location is 85625 Baiern. The machine is still in production and can be inspected while powered on. If you have any questions or need more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Fgsdpfxsxg Dhcj Aggog Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Bosch Rexroth, controller model: IndraMotion 10, rotary table diameter: 800 mm, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, short taper mount: 63 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis gantry-type machining center with 3,000 mm travel on the X-axis, 600 mm on the Y-axis, and 800 mm on the Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°. Fgodexn Ikdepfx Aggsg Turning package: Enables high-precision turning operations in combination with standard milling and facilitates both turning and milling in a single setup. Rotary table speed: 500 rpm. Rota S Plus 800 chuck by Schunk. The operating hours counter is defective.