USED ​​lathe PUMA GT 3100L

Doosan PUMA GT3100L

Condition: like new (used), Year of construction: 2024, functionality: fully functional, turning length: 1,275 mm, turning diameter: 481 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 26 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,907 mm, total length: 5,300 mm, total width: 2,105 mm, type of input current: three-phase, overall weight: 6,900 kg, spindle nose: ASA 11, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​2-axis CNC lathe "DN Solutions model PUMA GT3100L" with DN Solutions-Fanuc i-Plus iHMI CNC complete with chip conveyor, Morari self-centering steady rest with 15-170mm opening, automatic doors, 12-position turret, auto power off and tool life management. Godpfowuti Ujx Aadein

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 50223 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw Godpfx Aaoup Hwxsdoin - Tool breakage detection : BLUM

Condition: used, Year of construction: 2001, DAEWOO - DOOSAN PUMA 400 LB CNC LATHE MAKE DAEWOO - DOOSAN, MADE IN KOREA MODEL PUMA 400 LB YEAR 2001 CONTROL FANUC 18 iT CHUCK SIZE 450.0 mm SWING OVER THE BED 700.0 mm SWING OVER SADDLE 480.0 mm MAX TURNING DIA. 380.0 mm BETWEEN CENTRES 2100.0 mm Gisdexp Nfxjpfx Aadsn DRAW TUBE DIA. 117.5 mm TRAVELS: X AXIS: 362.0 mm Z AXIS: 2155.0 mm TURRET 10 STATIONS SPINDLE SPEED 20 - 2,000 rpm SPINDLE BORE 132.00 mm SPINDLE NOSE A2 - 11 BEARING DIA. 180.0 mm TURRET TOOL HEIGHT 25.0 mm TURRET BAR DIA. 50.0 mm TURRET INDEXING TIME 0.25 sec FEEDRATE RAPID TRAVERSE X: 16,000 mm/min Z: 18,000 mm/min FEEDRATE CUTTING FEED X , Z: 0,001 ~ 500.000 TAILSTOCK QUILL DIA. 120.0 mm TAILSTOCK QUILL BORE TAPER MT#6 TAILSTOCK QUILL TRAVEL 120.0 mm PLUS HYDRAULIC STEADY TOOL SETTING ARM SWARF CONVEYOR TURRET TOOLING FULL SET OF MANUALS

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 950 mm, total length: 600 mm, total height: 1,850 mm, air demand: 0.9 m³/h, tank capacity: 250 l, input voltage: 230 V, overall weight: 180 kg, Equipment: cabin, lighting, XTON SANDBLASTER™ is a premium sandblasting and bead-blasting machine, ideal for workshops with limited workspace. The 250-liter pressure blast cabinet operates in a closed-circuit system and features a unique filtration system with an integrated dust collector. It is designed for exceptionally quiet operation, enhancing user comfort. The device is equipped with high-quality grain leather gloves, which are resistant to mechanical damage. The machine can also be painted in any color from the RAL palette. Additionally, an option is available for the unit to be made of stainless steel. EQUIPMENT: - Worktable measuring 80 x 55 x 60 cm - 250-liter chamber - LED lighting - High-quality gloves TECHNICAL SPECIFICATION: - Weight: 180 kg Gisderl R Dlepfx Aadjn - External dimensions (W x D x H): 95 x 60 x 185 cm - Chamber dimensions (W x D x H): 88 x 55 x 60 cm - Chamber capacity: 250 L - Power supply voltage: 230 V / 50 Hz - Nominal working pressure: up to 10 bar - Cleaning efficiency: 25 m³/h - Cleaning grade: SA-3.0 – extensive and deep corrosion removal - Air requirement: 900 L/min - Maximum airflow: up to 12,500 L/min - Supported nozzle diameters: 2-15 mm - Nozzle material: tungsten carbide - Abrasive valve: MIKRO II - Viewing window dimensions: 270 x 510 mm - Worktable load capacity: up to 200 kg - Operating temperature: 10 - 50 °C - Construction: powder-coated steel, optional stainless steel

Condition: like new (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,250 mm, table load: 5,000 kg, spindle diameter: 105 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 1,400 mm, table width: 1,400 mm, feed length W-axis: 630 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 2,500 rpm, quill diameter: 105 mm, year of last overhaul: 2025, The machine is in excellent technical condition after a complete mechanical overhaul. Equipped with a Heidenhain iTNC 530 control system. Gisdpox E Uhaofx Aadsn

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door Gijdpjww Nazofx Aaden - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun - two steps coolant pressure

Condition: new, 8 St. range L-W-H 720 x 580 x 1000 mm weight 128 kg 100Kg je Lade Stable tool cabinet with 8 drawers, lockable. 2 x 75, 4 x 100, 1 x 150 and 1 x 200mm Internal dimensions: 620x450 mm. Maximum load per drawer 100kg!!! Furnishings: Godju Impmopfx Aadsin 32x boxes 75 x75 mm. 16x boxes 75 x 150 mm. 8x boxes 150 x 150 mm. 12x dividers long 32x short dividers 1x stacking tray

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Center lathe with: Gsdpjm Rlb Nofx Aadoin 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. Godpfjhzbipox Aadoin - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: as good as new (ex-display), functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain, rotational speed (max.): 12,000 rpm, Vertical machining center YCM NXV600A - demonstration machine Control: Heidenhain TNC620 Spindle: 12,000 rpm SK40 17kW Coolant system with IKZ20 bar Gijdovvuh Aopfx Aaden Handwheel Tool changer: 24-way Chip conveyor The machine is located at our location in Soltau and can be viewed in operation at any time!