Mechanical Deburring Press 1000 tons

Mechanical Deburring Press 1000 tons

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Nodpfx Aowp Rqfenfewf Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Nwsdpfeu A U Utox Anfjf The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. Nodpfxsq Suwbo Anfowf We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Nodpoifi D Tjfx Anfewf Delivery: EXW Székesfehérvár

Condition: used, Year of construction: 2013, lifting height: 88,000 mm, fuel type: diesel, Weights Empty weight: 47.700 kg Functional Lifting capacity: 530 kg Working height: 9.000 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 3290 m Transport dimensions (LxWxH): 16,35x2,55x4,01 Additional information Please contact Christian Theißen for more information Manufacturer: Palfinger Model: P 900 Year of build: 2013 Condition: Used Data: Nedpfewx Ny Rsx Anfewf Max. working height: 90,00 m Max. platform height: 88,00 m Max. reach: 32,90 m Total dimensions LxWxH: 16,35 x 2,55 x 4,01 m Platform dimensions LxW: 3,45* x 0,96 m Max. basket load: 530 kg Swivel range: 540° Ground pressure: 345 kN Ground clearance: 0,22 m Own weight: 47.400 kg Support width one side: 7,45 / 7,46 m Support width both sides: 8,30 / 8,15 m Support length: 8,70 m Special features: Swivel work basket 2 x 84°, Basket arm rotation angle 164°, Loading area with side walls, *telescopic then 2.25m, generator 4 KVA/230 V Information: TÜV and UVV new

Condition: good (used), Year of construction: 2000, table width: 1,000 mm, table length: 1,800 mm, ram plate width: 600 mm, total length: 25,000 mm, total width: 27,000 mm, total height: 47,000 mm, overall weight: 43,000 kg, die cushion stroke: 200 mm, Siemens Simatic OP 27 control system Nodpfx Anotiwgiofjwf Light barrier Sick Separate control cabinet Ritta Side passages Ground level installation

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Njdpophl Ecefx Anfjwf Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: new, New hydraulic high speed press from min. 300t up to max. 2500t. We offer new mechanical and hydraulic presses for various applications, individually tailored to your needs. Give us your requirements and we will make an attractive offer with installation and service. ISGEC has delivered to more than 26 countries in recent years, including Thailand, Indonesia, Vietnam, USA, Germany, Spain, France, Brazil, Hungary, Mexico, Bangladesh and over 200 presses to 40 Japanese customers. We are proud to be official sales partner since 2020 and look forward to hearing from you. Nsdpfx Ansf Rt Irefowf

Year of construction: 1986, condition: good (used), Technical Details : Products - Nwsdpfx Aod H Ur Aenfjf - Flats - 10x3 - 25x3 mm 10x4 - 25x4 mm 12x5 - 20x5 mm - Square - 6x6 - 12x12 mm - (T) Profile - 20x10x3 mm - ( L) Profile - 15x15x3 - 18x18x3 mm Raw Material wire - 8,9,10,11,12,13,14,16 mm Transformer Power - 20 Kw Speed - 35m/min

Condition: new, Year of construction: 2026, Technical specifications: - max. Thickness of cut sheet 1.2mm, - max. Working width: 3000 mm - in the equipment there is a stop for adjusting the cutting depth and a frame for holding the plate. - the extension table makes it easy to carry large-format metal sheets on the table - measuring table with graduation - robust and compact steel construction - high-quality, durable steel knives - extremely stable and heavy construction of cast iron - ground and hardened plate shear knives - Back gauge system - CE mark - declaration of conformity open design suitable for endless cuts large cast work table engine power 2,2 kW oil HL 46 Nedpfxoda I Ihs Anfjwf pressure force 4t working pressure 120-150 bar has hydraulic compensators from the cutter bar up Dimensions: Length: 3500 mm Width: 750 mm Height: 1150 mm Weight: approx. 1000 kg