Plunge-cut grinding machine

Microrex 2H

Condition: refurbished (used), machine/vehicle number: 2257, Manufacturing origin France Voltage 380/50/3 Netweight 3000 kg Custom position 8460.29 20 Dimensions 2400x1550 mm TECHNICAL DATA Diameter capacity 80 mm Type 2HA : 120 mm Maximum infeed grinding length 200 mm Maximum throughfeed grinding length (with normal-type guides) 300 mm Grinding wheel : -diameter 400 mm -maximum width 200 mm -bore 203.2 mm Driving wheel : -diameter 254 mm Godpfxofnm Iio Ab Ueca -width 200 mm -bore 127 mm Main drive motor 11-22 kW Driving wheel motor 1,1 kW Driving wheel speed 10 – 200 U/Min Standard accessories : 1 flange with grinding wheel 1 flange with driving wheel 1 workpiece support bridge 1 set of shims for workpiece support -Hydraulic dressing and trueing device for grinding and driving wheels -Variable speed drive of driving wheel -Electrical equipment for 3x380 v, 50 Hz -Main drive motor, 11 kW -Ammeter for main drive motor Starter keys and operating manual errors and omissions excepted data given without obligation.

Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - Gjdpfx Absrfx Tno Uoca STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: used, Centerless grinder MICROREX 2H Gedpfsxbt Ihox Ab Ueca

Condition: excellent (used), Tuscan LC38 x 3000mm CNC Lathe Swing Over Bed 970mm Swing Over Cross Slide 420mm Centre Height 490mm Distance Between Centres 3000mm 12 Station Duplimatic Turret Tailstock Boring Bat Attachment Boring Bar 2 x 3 Point Fixed Steady 1 x Travelling Steady Gsdpfx Absvtw Imj Uoca Fanuc OiTC Control C Axis & Driven Tools Serial Number LC223806086 Year 2010 /10

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 172822052, SPECIFICATION Trunnion table size 600mm diameter X axis traverse 600mm Y axis traverse 600mm Z axis traverse 500mm A axis tilt +120 deg/-120deg C axis rotation 360 degree Maximum table load 600Kg Spindle BT 40 Maximum spindle speed 15,000rpm Spindle motor 22.4kW Maximum spindle torque 239Nm at 1100rpm Spindle motor 35kW Rapid feed rate X,Y,Z axis 36m/min Rapid feed rate C axis 540 degrees a second (90 rpm Rapid feed rate A axis 99 degrees a second (16.6rpm) Toolchanger capacity 32 tools Approx. weight 9500kg   Gcodpfxjt Dmlfj Ab Uja MACHINE EQUIPPED WITH:- Siemens 840DSL CNC control system with Shop Mill Through spindle coolant, 20 bar Swarf Conveyor Laser toolsetting Traori-this function keeps the tool in an optimised cutting position relative to the workpiece when 5 axis simultaneous machining Networking Lighting Enclosed Guarding

Condition: ready for operation (used), Year of construction: 1995, Mostana 1M63 x 3000mm Gap Bed Centre Lathe Max’ distance between centres 3000mm Max’ swing Over Bed 700mm Max; swing over cross silde 350mm Max’ swing in gap 900mm Spindle Bore 105mm Spindle Speeds 10-1250 rpm Spindle Motor 15kW Cross slide travel 400mm Year 1995 Gcedpfewf Sfvex Ab Uea Machine complete with: Sony LH70 2 axis Digital Readout Interlocking chuck guard Taper turning through compound slide 500mm 4 jaw chuck 390mm 3 Point fixed steady Rapid power traverse 4 way tool post Change gears coolant For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #78739 Machine Serial Number: 1688 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED Gjdpev I Tx Rsfx Ab Usca TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Gjdpfx Abswmqkyj Ueca Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Fixed Steady

Condition: used, Year of construction: 2005, functionality: fully functional, USED Takisawa Taiwan model EX-308 3-Axis slant bed universal CNC lathe with Fanuc 21i-T control. Serial number CF02E30091 Year 2005 Heavy Cast Iron Construction High Performance 4 Track Linear Guideways Fanuc 21iT CNC Control 12 Station Heavy Duty, High Speed Servo Turret with Driven Tools Built in Oil Cooled Spindle Motor with Full C-Axis Programmable Tailstock Quill 8” 3-Jaw Hollow Spindle Hydraulic Chuck Tooling Package including two driven tool holders Swing Over Bed - 450 MM Distance Between Centres - 645 MM Max. Turning Diameter - 260 MM Max. Turning Length - 530 MM Bar Capacity - 52 MM Gedjt Dzz Iepfx Ab Usca X Axis Stroke - 180 MM Z Axis Stroke - 530 MM Spindle Speeds - 30 To 4000 RPM Number Of Turret Stations - 12 Number Of Driven Stations - 12 Driven Tool Speeds - 40 To 4000 RPM Driven Tool Motor - 1.1/3.7 KW Tailstock Travel - 435 MM Tailstock Quill Travel - 100 MM Rapid Traverse Rates (X/Z) - 20/24 M/Min Main Spindle Motor - 11/18 KW Floor Space - 2360 X 1745 MM Machine Weight - 4300 KGS

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 784, Machine Name - CMZ Machine Model - TL25 Y.O.M 2006 S.N 784 Description - Control Fanuc 31i Chuck size 250mm Swing 400mm 76mm spindle bore Max.turning diameter 676mm Gcodpfov A Ey Aox Ab Uea 12 Station turret Live tooling Sub spindle Swarf conveyor Tool setting probe Gantry loader Manuals