2-col.sheet-fed offset presses

Miller TP 104

Condition: good (used), Format: max 720 x 1,040 mm; min 360 x 520 mm Ppsdpfeqrqwmjx Aaasp Thickness (sealed materials): max 0.5 mm; min 0.06 mm Total dimensions (W x H x L): 3,340 x 8,960 x 2,175 mm Weight: 26,920 kg Equipment - Steel plate feeder & delivery - Unimatic C3 remote control - Automatic color adjustment via the control panel - Lateral, linear and diagonal register from computer - Powder applicator Perfecting - 2/2-4/0

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: R6, working width: 420 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 500 kg, input current: 16 A, compressed air connection: 5 bar, input frequency: 50 Hz, Spiral forming and binding machine for metal spiral binding of books. Forms and inserts wire coils into pre-punched notepads and diaries. Uses plain or coloured nylon-coated steel wire. Equipped with 16mm diameter forming mandrels. ( other sizes available on request) Range available: 6.- 22mm Ppodpfxotltr Sj Aaaep Ideal for notepads and student's diaries. Auto-eject with exit conveyor. Production speed up to 500 items per hour. Power requirements: 400 VAC 1 Kw Compressed air: 5 bar

Year of construction: 1992, condition: ready for operation (used), Max. paper size: 720x1040mm, min. paper size straight printing: 360x520mm, straight/reverse printing: 440x520mm, paper thickness: 0.06-0.5mm, max. print size straight printing: 710x1030mm, straight/reverse printing: 700x1030mm, max. throughput straight printing/ straight/reverse printing: 7000/ 5000 sheets/h, printing plate size (recommended): 790x1045mm, print start: 48mm, print-free gripper margin: 10.5mm ±1mm. Equipment: Miller TP 104 basic machine with two printing units, perfecting device between the first and second printing unit, numbering tower with control for Zeiser and Leibinger mechanical numbering units (without numbering units), Spiess TP 104/1 sheet feeder, load: 10,000N. Remote adjustment via control console: colour control 1st and 2nd printing unit, fine adjustment of circumferential and lateral register: ±1.5mm, plate cylinder, 2x plate clamping rails at the front - single - only divided at the rear, blanket cylinder washing device - completely defective, cleaning by hand, powder sprayer without additional control, delivery extension additional area after numbering unit by approx. 1.85m, 10x application ink rollers, 8x ink transfer rollers, 1x blanket roller, 1x wash roller, 1x ink lifting roller, complete documentation. Pjdpew Azubsfx Aaaspp

Condition: new, Ostas 3-roll round bending machine ORM 1070 x 110 Technical specifications: Special equipment included in the price: hardened rollers motorized rear roller adjustment digital display sheet width 1070 mm sheet thickness 5,0 mm max. sheet thickness 4,0 mm bending roll length 1070 mm roll diameter 110 mm weight 1000 kg dimension L-W-H 2250 x 800 x 1100 mm Motor: 2.2 KW Equipment: upper and lower roller electrically driven upper roller can be swung out conical bending device asymmetric roller arrangement Pjdpfx Asgkwhasaaspp self-braking main motor sep. control and operating panel safety line CE-sign

Condition: used, Year of construction: 2005, functionality: fully functional, Horizon BQ-270 (2005) 1 Clamp Perfect Binder / Binding Type: Hot-melt Book Block Size (Paper Size for Book Block): Maximum: 320 × 320 mm / Minimum: 135 × 105 mm Book Thickness: 1 – 50 mm Cover Size: Maximum: 320 × 660 mm Minimum: 135 × 230 mm Suitable Cover Paper Weight: 70 – 260 gsm Maximum Cover Pile Height: 70 mm Production Speed: Up to 500 cycles per hour Power Requirements: AC 200 V, 3-phase, 50/60 Hz Heater Power: 2.2 kW Podsxyua Nepfx Aaaopp Machine Dimensions: 2,300 (W) × 860 (D) × 1,250 (H) mm Machine Weight: 900 kg

Condition: used, Year of construction: 2005, The Sakurai 466 SIP, manufactured in 2005 and bearing serial number HF113105, is a four-color offset press with a maximum sheet size of 470 x 660 mm and a total of 25 million impressions. Currently in operation at a printshop in Germany, this press is equipped with the DTC Delivery Top Console featuring a touch screen and full remote-control operation. It incorporates advanced automation systems such as SIS (Sakurai Interactive System) for make-ready, SAS (Sakurai Auto Set) for paper size and thickness adjustment, and SPC (semi-automatic plate change), along with a plate running register system and cocking register for precise alignment. Ppodpjxa Eamsfx Aaaep The press is fitted with automatic washers for blanket cylinders and inking rollers, Olivermatic dampening, and a Baldwin refrigeration and Bal Control system to ensure consistent print quality. Its feeder includes a suction-belt feed table with electronic double sheet and side lay detectors, while the chromed impression cylinders enhance durability and performance. The machine also features a perfector for 4/0 or 2/2 printing with full automation, semi-high pile delivery, and a powder spray system. Included with the press are a plate punch, compressor, tools, and manuals, making this Sakurai 466 SIP a complete and well-equipped solution for high-quality, efficient offset production. Format: 470 x 660 mm Equipment: Console DTC (Sakurai Delivery Top Console) with Touch Screen. Full Remote Control Operation : SIS (Sakurai Inter Active System) for make ready Plate Running Register system SAS (Sakurai Auto Set) for Paper size and thickness SPC (Semi-automatic Plate Change) Cocking Register Automatic Washers: Blanket Cylinders & Inking Rollers Olivermatic Dampening Baldwin Refrigeration System & Bal Control Feeder with Suction-belt feed table Electronic Double Sheet & Side lay Detector Chromed Impression Cylinders Perfector 4/0 - 2/2 (Full automatic) Semi-High Pile delivery Powder Spray Including: Plate Punch, Compressor Tools and Manuals

Year of construction: 1977, condition: used, Weiler Matador VS2 lathe year ca.1977 with collets , collet tube , three-jaw chuck , Multifix. Guide in the front area shrunk. Machine in a ready to use condition , After consultation under power ready for demonstration. Ppsdjmdn Dxjpfx Aaasp

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, type of input current: AC, Equipment: CE marking, type plate available, Heidelberg Diana 90 AUTOSET – Refurbished Folder Gluer / Folding Carton Gluing Machine ✅ Condition: Fully refurbished in 2024 (complete mechanical and electrical overhaul, new motors, shafts, rollers, and control electronics) ✅ Functions: Straight-line, crash-lock bottom, 4-corner box gluing ✅ Speed: up to 500 m/min ✅ Formats: Diana 45 → 48–570 mm | Diana 90 → 48–900 mm ✅ Automation: Motorized carriers, AUTOSET feature, touchscreen operation ⚙️ Advanced Features - Precision aligning module for perfect folding - Feeder and transfer sections equipped with independent drive motors - Pneumatically lifted feeder top for easy access - LPS Clamping System for rapid module setup - Glue system with LPS GP AUTO (maintains glue freshness during stops) - Drive system: IE3 motors, ABB frequency inverters, Siemens PLC control - Final fold station design inspired by Bobst Alpina 🚀 Why choose LPS Diana? ✔️ High efficiency – quick job changeovers with Autoset ✔️ Versatile – accommodates a wide range of carton types ✔️ Premium build – robust frame for stability and vibration-free operation ✔️ Remote diagnostics and service capability 🏭 Additional Machines Available from Stock We are a company specializing in full mechanical and electrical refurbishment of folder gluers (Heidelberg Diana, Bobst Alpina). We deliver machines with new modules, including our proprietary semi pick-up delivery table system. Currently available refurbished folder gluers, nearly ready for delivery: Psdpfx Aovy Efyoaaspp - Diana 90 Crashlock 4/6 Corner – €120,000 - Diana 90 – €100,000 - Diana 45 – €100,000 👉 All machines are fully rebuilt and include: - New shafts and bearings - New electrical cabinets with ABB and Siemens components - Comprehensive mechanical and electrical overhaul Prices are negotiable depending on configuration and customer requirements.

Condition: used, Year of construction: 2003, functionality: limited functionality, paper width (max.): 500 mm, paper height (max.): 350 mm, Ryobi 525 HXX – 5-Colour Offset Printing Press Year of manufacture: 2003 Number of impressions: approx. 103 million Colours: 5 Max. printing format: 35 x 50 cm Pedpfx Aeymlmzoaaspp For sale is a well-maintained Ryobi 525 HXX 5-colour offset printing press from 2003. The machine is fully operational and currently still in production. It has mainly been used in our facility for envelope printing and has therefore been operated gently, experiencing minimal stress from typical commercial print jobs. Condition & Notes: - Machine is production-ready - Service recommended for: - 16 ink zone screws - Technotrans unit (partially leaky) This press is ideal for printing companies seeking a reliable 5-colour quarter-format machine, suitable for commercial printwork, envelope printing, or special productions. Inspection under power possible by appointment. If you are interested, we look forward to your enquiry.

Condition: good (used), functionality: fully functional, year of last overhaul: 2023, EN: For sale a complete and efficient line for profiling steel sheet from tape, e.g. Magnelis, into any profiles, e.g. type C, used in photovoltaic installations and farms, construction of steel halls, shelters as well as for furniture production, etc. Pjdpfju A U Utsx Aaaepp The line with the unwinder is located in a heated hall in almost laboratory conditions, for the buyer the possibility of starting it up before purchase, I have contacts to companies that supply sets of profiling rollers for specific profiles as well as to companies dealing with the modernization of such machines in terms of its expansion, etc.