Wheel Blast Machine

Modena CM T10

Condition: good (used), Year of construction: 2008, La Meccanica CLM 800 POR Granulator Rbedpfx Aswdawqeaaew The machine has no door It worked on a cake

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm Rbjdpoqvd Iqefx Aaaew travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 184 3500 2E Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 184cm Side wall height: 30cm Loading platform height: 68cm Gross vehicle weight: 3500kg Payload: 2746kg Braked tandem axle trailer Overrun and hand brake by AL-KO Largest possible axle and brake configuration Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tension locks All sides foldable and removable 15mm thick, slip-resistant and robust phenolic plywood floor Additional steel plate on wooden floor Automatic jockey wheel, 400kg support load 8 noise-reducing lashing rings with 800kg pulling force Reinforced 13" C-type tires with steel valve M+S tires Mesh/rope hooks on the frame 13-pin plug LED front marker lights Rear lamps with reversing light, rear fog light, and triangular reflectors Upper frame mounted on rubber buffers Large rear tipping angle of 51 degrees Electric tipping operation with plug for charging the 12V battery OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with carrier - Without side walls (discount) - Side wall height extension to 35cm - Black Edition (black powder-coated side walls and rims) - Integrated loading ramps 2800kg - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump - Safety support for maintenance work when tipped - Folding crank rear supports - Complete LED lighting - Anti-theft device - Mesh cover (fine or coarse) - H-frame - Mesh grid in various heights, also fully enclosed - Side wall extensions 30cm with tension locks - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus delivery to Gera and vehicle registration document €250 net Images are example views and may include optional equipment offered at extra cost. Haven’t found the right trailer yet? We always have 50–100 vehicles in stock and ready for immediate pickup. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Specialist in axle repair, also for caravans. We also offer a wide range of spare parts and accessories for trailers from various manufacturers. You’ll also find a wide array of rental trailers available. Visit us online or stop by in person! Rbsdpfx Aoghpc Neaaew

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors Rbsdpfx Aou R Urhoaaew - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: ready for operation (used), Functions according to the magnetic particle technology, with documentation and accessories, an inspection is possible. Rsdeq Npf Uepfx Aaaobw

Condition: good (used), Plant: REWA Chamber Filter Press used Type: 470-15-25K-HP Design: side rail guided Filter plate format: 470x470 mm Number of plates: 15 Filter plates: PP Rodpfjqakbrex Aaaebw Filter cloths: optionally available in coordination with the medium Press capacity: approx. 57 dm3 Filter pressure: approx. 15 bar Material of parts in contact with the product: Flange, feed-throughs stainless steel, PP or rubberized Material of parts not in contact with the product: Stainless steel Purchase or hire: Inspections of the systems by arrangement at our factory. Other: We can supply you with used equipment ready for operation or refurbished according to your wishes and requirements. Would you like to rent or buy this system? Please contact us, we are at your disposal.

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Reded Tx Ahjpfx Aaajbw

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. Redpfx Aopugwioaajbw The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-4, empty load weight: 796 kg, maximum load weight: 2,704 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, maximum speed: 100 km/h, trailer brake: trailer braked, Year of construction: 2026, SARIS K3 306 170 3500 2E Three-way Tipper NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 75cm Gross weight: 3500kg Payload: 2702kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum size axle and brake Low chassis height Fully welded, hot-dip galvanized steel frame Aluminum profile sidewalls with tension locks Fold-down and removable on all sides 15mm thick, anti-slip and durable phenolic plywood flooring Additional steel plate on wooden floor Automatic jockey wheel with 400kg load capacity 8 noise-reducing lashing eyes with 800kg tensile strength each Reinforced 13'' commercial tyres with steel valves M+S tires Net/roping hooks on the frame 13-pin connector LED position lights at the front Rear lamps with reversing light, fog lamp, and triangular reflector Upper frame mounted on rubber bushings Generous tipping angle of 49 degrees to the rear Side tipping by relocating safety pins Electric tipping operation with charging plug for the 12V battery Electric lateral tipping angle limiter U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100km/h package (shock absorbers) - Spare wheel with bracket - Without sideboards (discounted price) - Black Edition (powder-coated sideboards and rims in black) - Integrated ramps 2800kg - 35cm sideboards - Battery charger - Remote control - Bluetooth remote control - Emergency hand pump to use with electric operation - Safety support for maintenance work with tilted trailer - Folding crank rear supports - Complete LED lighting - Anti-theft device - Fine or coarse mesh net - Headboard - Leaf mesh in various heights, also closed - 30cm extension sideboards with tension lock - Flat tarpaulin with or without bows - High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration documents (Kfz-Brief) €250 net Images are for illustration purposes and may show equipment subject to a surcharge. Haven’t found the right trailer yet? We always have 50-100 vehicles in stock and ready for immediate delivery. The workshop is open for all types of repairs on weekdays from 8:00 am to 5:00 pm. Axle repair specialist, including for caravans. We also offer a wide range of spare parts and accessories, also for trailers from different manufacturers. Rbjdpoghpc Tofx Aaaow A large selection of rental trailers is available on site. Visit us online or stop by directly!

Condition: used, Year of construction: 2005, Technical details: Rbjdpfx Aaowp D Nbsaow turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *