Coolant equipment

Motorex Oil

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), Parts Cleaning System / Spray Cleaning System Type CM13 2-Tank (Washing + Rinsing) including air knife blow-off Basket Diameter: 1,300 mm (octagonal) Max. load capacity: 1,000 kg Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine. Useful height: 800 mm Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar Total connected load: approx. 52 kW Control: Siemens S7-1200 with KTP700 touch panel Including the following features: + automatic water refill for both tanks + automatic chemical dosing 1-10% (Dosatron) + special spray system (can be optionally activated) for small components (= E-spray system) + side channel blower with height-adjustable air knife system (blow-off drying) + steam extraction including condensate return + weekly timer for electric heating + pre-configured for retrofitting an oil separator + media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing) + external cladding with stainless steel sheet + complete system fully insulated + tanks separated into two modules; fully insulated (different temperatures possible) + removable filter baskets in the return flow + stainless steel circulation pumps incl. mechanical seal and soft starter Fgedpfx Aev Tm Ayoanji The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 22-009, Rotary spray cleaning machine YM-850 The YM-850 rotary spray cleaning machine is designed for efficient cleaning of industrial parts with hot pressurized water and biodegradable cleaning agents. This machine has very low running costs and low consumption. The machine frame and body are made of high quality corrosion-free stainless steel. This machine is the right choice for cleaning oil, grease and production residues on the surface of workpieces as well as for corrosion protection applications. The YM machine has stainless steel pump, spray nozzles, heating elements and motorized basket design as standard. - Spray cleaning system for small to medium batch sizes, - for workshop, maintenance or intermediate cleaning - Cleaning with hot water - Spray cabin as a top loader Technical details: Basket diameter: 700 mm Loading height: 380 mm Tank capacity: 120 liters Fsdjtwmxyjpfx Aansgi Pump pressure: 8 bar Heating: 7.5 kW maximum loading weight: 120 kg Connection: 220-380 volts - 3 phases Timer: 0-30 mins Thermostat: 0-60 C° Stainless steel body: 430 AISI Filter cups: 2 pieces - 2-3 mm perforation Internal filter: 100µ

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. Fgsdpfxszfkbae Aanoi The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: excellent (used), Year of construction: 2009, Technical Data Machining: 5 axes: 3+2 Travel distances X / Y / Z: 300 / (300 + 100) / 330 mm Spindle speed max.: 24,000 min-1 Control system: FANUC Series 31i-MODEL A5 Tool magazine: 21 positions Rapid traverse X / Y / Z: 54 m/min Table load, base machine: max. 200 kg, evenly distributed Tool length max.: 190 mm; Ø40 mm in the range of 120–190 mm Tool diameter at 150–12,000 min-1: 80 mm Tool diameter at 12,000–15,000 min-1: 60 mm Tool diameter at 15,000–20,000 min-1: 45 mm Tool diameter at 20,000–24,000 min-1: 40 mm Peiseler indexing head: AWUP, pneumatic clamping up to 6 bar Peiseler: Faceplate speed max.: 55 min-1 Peiseler: Tangential torque during circular milling max.: 250 Nm Peiseler: Transport load, faceplate vertical: 150 kg Peiseler: Tilting moment: 1200 Nm Peiseler: Tangential torque clamped (6 bar): 500 Nm Peiseler: Center bore: 50 H7 mm Peiseler: Faceplate runout: 0.01 mm Peiseler: Center bore runout: ±0.01 mm Peiseler: Positional accuracy from worm gear: ±15 arcseconds Connection, weight and dimensions Tool weight / total tool weight: 2 / 23 kg Machine weight: 2050 kg Electrical connection: 3 phases, 200/220 V, 50/60 Hz Fsdj Aba Ifspfx Aanjgi Connected power: 10 kVA Equipment and scope of delivery Peiseler AWUP swivel/indexing head for 3+2-axis machining Elbaron electrostatic filter, documentation RONA 60 SV Renishaw OMP40-2 measuring probe Blum measuring probe in the work area Extinguishing system according to the photos Technical specifications are subject to change without notice. Errors and prior sale reserved. The properties agreed upon in the purchase contract and the agreed scope of delivery shall apply.