3 d button buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
5
Button machine, knuckle-joint press, crimper -pneumatisch operated -The machine is also suitable for processing by push buttons Segeltuchö [...] Tool dimensions 610/470/H1380 mm 3oikdr8 Weight 52 kg more
3
Siemens 6AV3688-4CX02-0AA0 PP17-I professional SAFE push button panel (half keyboard) with protective film and installation material, E-stand 4, was for testing purposes only briefly in use, mint condition, in the original packaging Bb2kzayegn more
4
Grinding diameter of 100 mm Grinding length of 100 mm Mhpqsfgt with magazine sanding belt unit for grinding the faces Engine was overhauled in 2002, since then sporadic in use, total in a very good condition immediately ready for use currently in storage, can be performed but more
1
Ball probe 3R with 3 mm ball and clamping tapers in a wooden case Cpsxahib more
2
Buttons row TRIA 7500 right, RAFI c. RS027 taken from a Morbidelli author 503 used, tested Inhelkh more
4
Fire switch, smoke vent button, switch, limit switch -24VDC C2m2kbmg Price per piece -4 x available Weight 0.6 kg / piece more
3
Siemens 6AV3688-4CX02-0AA0 PP17-I professional SAFE push button panel (half keyboard) with protective film and installation material, E-stand 4, 4 holes punched and otherwise mint condition, was sealed with white buttons, short for test purposes only in use, in open Original packaging Gp0p9e8l more
6
3D-Infrarot button Manufacturer: HEIDENHAIN Type: TS 641 State: Unchecked Xezs2juwy Carrying case dimensions 435/220/H145 mm Weight 4 kg more
3
Siemens 6AV3688-4CX02-0AA0 PP17-I professional SAFE push button panel (half keyboard) with protective film and installation material, E-stand 4, 4 holes punched and with two white and based on a red and green button locked, otherwise mint condition, was only to Testing in the usage in the original packaging Gshdbxgsm more


3 d button
daily

New machines via email!

Stay updated!
1
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Cybt3xp8 VERVILLE VP405 Pet Size Bag Bagging Equipment: -- Model "VP405" - 4-Station bagger -- Finish bag size 8" x 5" x up to 20" -- Complete with holding bin and screw feeding conveyor -- Production up to (4) bags per minute more
6
Technical data SteuerungsartLeonard + Bauer Ausladung2000 mm Stahl6, 3 mm thickne... more
5
Druckluftfilterm, fine filter connector 2 "inch piece - 3 x filters present award Qldjowohy more
6
Vehicle data - make: BT - type: PES 125 L / / HH 2900 mm battery from 2016 / initial lifting / duplex - drive type: electric - load capacity: 1250 kg - load Centre of gravity:-lifting height: 2900 mm - range: 0 mm - year: 2008 - operating hours: 3509 - internal e No.: C0469 _ Mast data - mast type: duplex - lifting height: 2900 mm - height: 1980 mm - free lift: 1500 mm - carriage: 0 mm - forks: 1150 x 75 x 40 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 1980 mm - weight: 0 kg _ ... more

Gear Testing Machine KLINGELNBERG ZP 260

Langenfeld, GermanyGermany dealership location
6403 km
2000
used
max. wheel diameter 260 mm gear width 400 mm max. module 15 min. module 0.5 total power requirement 1,7 kW weight of the machine ca. 1.2 t dimensions of the machine ca. 2 X 3 x 3 m Moqql more
6
thread dia. 250 mm grinding length 500 mm thread pitch - mm tread diameter 2 mm clamping length - spindle head right 900 mm spindle bore 66 mm clamping length - spindle head left 1020 mm workpiece weight 200 kg pitch 0,8 - 288 mm pitch angle +/- 40 ° workpiece turning speeds 0,4 - 50 U/min grinding wheel width 8/13/16/20/30 mm table feed 1500 mm/min grinding spindle speed 1900-2450 U/min no. of feed 12 max. thread profile 12,5 Modul Gun2yk number of starts 1 - 8 dia. of hole 160 mm grinding w... more
1
Elect./Voltage: 208/230 V, 60 Cy, 3 Ph. Bbvsyvyoe9 Hyundai Kia KBN135 CNC Horizontal Boring Mill -- X-axis travel 118". -- Y-axis travel 79". -- Z-axis travel 63". -- W-axis travel 27". -- Spindle speed 5-2000 RPM. -- Spindle bore 5.31". -- Spindle motor 30HP. -- 4 Step gear box. -- Rapid traverse 315 [...] with: -- Fanuc 16iMB control. -- 60 position tool changer. -- Set up for CAT 50 tooling. -- CTS 150 PSI. -- 10,200 running hours. -- Full B-Axis. -- Hydraulic clamping on q... more
3
Bosch 3842290880 / 3 842 290 880 planetary gearboxes, pitch of holes (motor side): 52 x 52 mm, used, normal wear, 100% functional Gthwekrpy more
5
Tilting frying pan, dump trucks, roasters -electrical tilting frying pan -with hand wheel tipping -Cast iron Crucible -Cast Tiegelmasse 640 x 420 x 110 mm Port 380 Volt Performance 6.6 kW Crucibles tilting 90 ° -Folding Schanierdeckel Panels made of stainless steel 3bdep8lf Dimensions W/D/H 700/850/850 mm Weight 160 kg more
6
Vehicle data - make: OM - type: E40N / / HH 3,940 mm / 4.0 T lifting capacity - propulsion: electric - load capacity: 4000 kg - load Centre of gravity:-lifting height: 3940 mm - range: 0 mm - year: 2001 - operating hours: 8556 - internal No.: C0495 _ _____ Mast data - mast type: standard - height: 3940 mm - height: 2610 mm - free lift: 0 mm - carriage: 0 mm - forks: 1350 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2610 mm - weight: 6250 kg _ Gxs... more
3

CNC Lathe OKUMA Howa Act 2 SP 3

Wilbertoord, NetherlandsNetherlands dealership location
6307 km
1995
used
turning diameter 300 mm turning length 250 mm control OSP 5000 weight of the machine ca. 7 t Bazo0ddmzh more
6

Rotor Milling Machine HOLROYD 5 AC

Monheim, GermanyGermany dealership location
6405 km
1989
used
rotor dia 630 mm hobbing length 1700 mm Zbdabbmuz clamping length 1740 mm milling cutter diameter 600 mm range of angles 0 - 60 ° hob turning speeds 20 - 120 U/min milling motor 45 kW milling slide travel 1270 mm spindle bore 203 x 838 mm max. workpiece diameter 630 mm pitch in mm 150 - 2500 mm milling width 216 mm boring diameter 100 mm total power requirement ca. 60 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 5,3 x 6,25 m Auto Pump- Rotor Milling Machine This machine... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. 38n9bxut PASCO 6655 Low Level Automatic Palletizing SystemThis time and labor saving Palletizing System consists of: -- Infeed conveyor -- Automatic bag turner -- Automatic row former -- Main tower for stacking 120" high pallet -- Automatic pallet dispenser -- Automatic slip sheet dispenser -- Positioning conveyor -- Panel View "550" touch screen operator interface -- Previous pattern 1 x 2 -- Bag tamper -- Dual swipeEXTRA FOR DISMANTLING AND CRA... more
3
Bockwoldt 0 71N/4 d gear motor, serial number according to the photo, Ø shaft: 20 mm, supplied with gem. used, normal wear, 100% functional, photos Gvlsh8 more
5
Universal angle head milling milling angle head, Hibjzqy7g Recording MK3 -Swivel Masterbar 300/300/H370 Weight 66 kg more
6
Vehicle data - make: Linde - type: H30T 02 //Bj 2013 / HH 4180 mm / side-shift - drive type: LP gas - load capacity: 3000 kg - load Centre of gravity:-lifting height: 4180 mm - range: 0 mm - year: 2013 - operating hours: 14754 - internal No.: C046 7 _ Fk27p7v Mast data - mast type: standard - height: 4180 mm - height: 2730 mm - free lift: 0 mm - carriage: 0 mm - forks: 0 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2730 mm - weight: 4830 kg _ Battery & charger - batte... more
2

Table Type Boring and Milling Machine SCHARMANN FB 80

Mönchengladbach, GermanyGermany dealership location
6371 km
1961
used
spindle diameter:80 mm x-travel:1000 mm y-travel:710 mm faceplate diameter:500 mm spindle taper MT:5 Tephbfcmc total power requirement: kW weight of the machine ca.:12 t dimensions of the machine ca.:5,0 x 3,0 x 3,0 m 3-axes digital readout more
6

Sheet metal roller Faccin Italia 4HEL 3166

Babberich, NetherlandsNetherlands dealership location
6320 km
2004
used
Technical data SteuerungsartConventionel Hydraulic / MechanischHydraulic Fe7kp8b ... more
1
Elect./Voltage: 200-600 V, 50/60 Cy, 3Ph Bccafufqgo BIESSE ROVER 30 S2 FT FLAT TABLE MACHINE (W/ATC/BORING): -- Specifications: 5' x 11' "MATRIX" grid phenolic table for "Nested Base Manufacturing"Working cap. "X" Axis is 135.11" (3,432 mm), "Y" axis is 61" (1,550 mm), "Z" axis stroke is 11" (275 mm), max. material thickness is 8.9" (200 mm) -- Positioning Speed:"X & Y" Axis is 230 FPM (70 MPM) & "Z" axis is 98 FPM (30 MPM). -- Work Table:Flat table designed for "Nested Base Manufacturin... more
6

milling machining centers - vertical AXA VSC 3 - XTS

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2007
used
x-axis 2600 mm y-axis 700 mm z-axis 850 mm table surface area 3060 x 800 mm tool taper HSK A63 turning speeds 1000 U/min Automatic tool changer 72 Stk. control HEIDENHAIN iTNC 530 total wight 21,5 t - 2 x zero point clamping system SCHUNK - extensive tooling - approx. 28000 hours of operation Bcbhpixids The machine has worked in Switzerland and is in a VERY GOOD condition! more
5
RADIUS milling cutters, cutters Finishing end mills -1 x diameter 84 mm height 44 mm R12 mm -1 x diameter 102 mm height 53 mm R15 mm -1 x diameter 114 mm height 70 mm R20 mm Type HSS Libwd Number 3 piece -sold Weight 5.4 kg more
6
Vehicle data - make: Linde - type: H25T / / triplex / HH 5515 mm / side-shift - drive type: gas - load capacity: 2500 kg - load Centre of gravity:-lifting height: 5515 mm - range: 0 mm - built: 2006 - operating hours: 11005 - internal No.: C0465 _____ Fp87w8fei Mast data - mast type: triplex - lifting height: 5515 mm - height: 2454 mm - free lift: 1811 mm - carriage: 0 mm - forks: 1200 x 0 x 0 mm _ Dimensions - length: 0 mm - width: 0 mm - height: 2454... more
5

Vertical Turret Lathe - Double Column TITAN SC 4044

Mönchengladbach, GermanyGermany dealership location
6371 km
2002
used
faceplate diameter:4000 mm swing diameter:4400 mm turning height:2060 mm slide stroke:1200 mm ram head dimension:250 x 250 mm faceplate turning speed range:1 - 92 U/min cross rail adjustment:1800 mm workpiece weight:30 t feeds:1 - 2000 mm/min main drive motor:55 kW Vsetae total power requirement:80 kW weight of the machine ca.:64 t dimensions of the machine ca.:9,0 x 7,2 x 6,6 m with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conve... more
3
Flat-pile feeders 2 parallel folding plates Glue station Tape delivery Djka2sj more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. 38iakhd9 VERVILLE VP400 4-STATION COMPRESSION BAGGING UNIT -- Model VP400 4-Station Compression Bagger -- Stapling Closing Device for plastic or paper bag -- High tubes of 116" -- Tube size 11" x 17" by up to 30" high -- Complete with Screw Feeding Conveyor -- Hydraulic pack and Control panel -- Exit finish bale conveyor -- Very low usage more
6
internal diameter ca. 550 mm grinding depth 500 mm swing diameter 800 mm stroke of the table 800 mm total power requirement 20 kW weight of the machine ca. 7 t dimensions of the machine ca. 4 x 3 x 2 m Bbpqj8rpyp more
5
Forklift battery charger, industrial charger, truck battery charger, industrial charger Qk92gdmug -48 volt Performance 90 A Port 380 Volt Weight 95 kg more
5
max. wheel diameter 1250 mm gear width 580 mm max. module 12 min. module shifting 240 mm milling spindle speeds (infinitely variable) 32 - 200 U/min center distance betw. workpiece-tool min/max. 60 / 740 mm min. number of teeth 12 table diameter 950 mm table bore diameter 200 mm hob dia. - max. 220 x 260 mm feeds - tangential 0,126 - 2,53 mm/min feeds - radial 0,09 - 1,8 mm/min feeds - axial 0,30 - 6 mm/min main drive 11 kW wheel diameter with counterstay 750 mm wheel diameter - without coun... more
3

Lateral Milling Machine JOBS JOMACH 159

Mönchengladbach, GermanyGermany dealership location
6371 km
2005
used
x-travel:18000 mm y-travel:2500 mm z-travel:1250 mm spindle motor:31 kW spindle turning speed range:10 - 10000 U/min spindle taper::HSK A 80 number of tools:104 :A-Achse +100/-90 c-axis:+/- 200 ° feeds:1 - 16000 mm/min M27qp rapid traverse::16 m/min weight of the machine ca.:72 t total power requirement:65 kW dimensions of the machine ca.:25,5 x 10,0 x 5,2 m Machine equiped with SIEMENS 840 D control for 5 axis - NC 2-axis fork type milling head - BALLUF tool identification system - MARPOSS ... more
3

unknown POLAR Abstapler TRE 145 L 3

Espelkamp, GermanyGermany dealership location
6453 km
1985
used
unknown POLAR stacker TRE 145 L 3 Bb3telo7r0 more
1
Elect./Voltage: Wtibo KCB BAGS BIG SACKS BULK TOTES "BRAND NEW" -- Brand New Bulk Bags, never used -- Bag size: 35" x 35" x 25" S/S -- 2,200 Lbs, SWL (1,000 kg), Safety factor 5:1 -- Document pouch -- Fill spout top inlet -- Bottom discharge chute with flap, liner. -- Packaged at (130) bags per pallet -- There are (40) pallets (5,200 bags) per container -- Price is per Container -- There are (6) Containers available. -- Optional: (3) Bulk Bag Fillers also available. more
2
Agie MJG 4014 D measuring circuit for conductivity [...] 619 782.6, used, low wear, 100% functional, included with com. photos Bb3j7arwg2 more
5
3-roll feed, feed, spindle moulder feed -3-roll feed Feed speeds 2-30 m / min Weight 40 kg Qkoof7zvz more
5
turning diameter over bed 640 mm turning diameter over slide rest 360 mm turning length 800 mm centre height 320 mm centre distance 1000 mm spindle turning speed range 3 - 240 U/min spindle taper MK 5 no. of T-slots 1 - 40 Stück max. workpiece diameter 340 mm number of teeth 1 - 40 spindle diameter in front bearing 140 mm main spindle bore 45 mm module 10 / 20 total power requirement 15 kW weight of the machine ca. 5 t dimensions of the machine ca. 4,0 x 2,0 x 1,5 m G2aojz8yo Relieving La... more
6
[...]: 4655\\\ * Device details: * Load capacity: 1000 kg Lifting height: 3000 mm Free lift: 1405 mm Mast type: Duplex mast height: 1950 mm Length/width/height: 1623 / 990 / 2090 mm Operating weight: 2570 kg * Equipment: * * Protection umbrella * 3rd valve * Full free lift * Working lights front * Working light rear * Attachments: * * Side-shift \\**Weitere device information: * \ renewed tire on the steering axle Replaced seat cushions Replaced steering wheel Steering mot... more
2

fitter s bench WST Werkbank

St. Ingbert, GermanyGermany dealership location
6503 km
used
length:2000 mm width:700 mm height over floor:900 mm thickness:45 mm :Anthrazit weight:152 kg drawer block:3 +1 G8x3zp more
1

BORING MILL KING HEAVY DUTY

North Carolina, United StatesUnited States dealership location
518 km
used
Elect./Voltage: 220/440 V, 60 Cy, 3 Ph. Bbvsycwc37 62" King "Heavy Duty" Vertical Boring Mill -- Table diameter 62". -- Swing, maximum 66". -- Height under rail, maximum 53.5". -- Ram-head travel, vertical 53". -- Ram-head swivel, 60°. -- Side-head travel, vertical 49.5". -- Side-head travel, horizontal 29". -- (12) Table speeds, range 1.7 to 55.4 RPM. -- (12) Feeds, range 0.01 to .500 IPR. -- Main motor, 25 HP / 1760 RPM. -- Floor space required 204" x 144". -- Overall height 14... more
2
Brother B521169-3 circuit board from brother TC-321, serial number according to the photo, used, good condition, 100% functional Bb3day3yty more
3
V-belt pulley, pulley Large selection of v-belt pulleys. Ccqnap9 Estimate on request more
6

Cleaning unit BvL Oberflaechentechnik GmbH RC 1600 RW S 2T

Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
2009
used
- - Technical Data Effective depth / ht. : 1.000 mm - Diagonal : 1.600 mm - load capacity : 2.000 kg - current : 3 x 400 V, N+PE, 50 Hz Wash tank data - capacity : 2.000 l - heater : 91 kW, elektrisch - Pump : 30 kW - washing pressure : 7 bar flushing tank data - capacity : 1.000 l - heater : 39 kW, elektrisch - pump : 7,5 kW - pressure : 4,5 bar The machine has worked in a multinational, therefore in good condition Bcbho9gcpr and has worked less than 4700 hours running time! The entir... more


3 d button
daily

New machines via email!

Stay updated!

to

to

Edit search
3 D BUTTON
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close