Used Airless Painting System Painting Pump for sale (43,085)

Year of construction: 2023, condition: excellent (used), Flowtech Flowboost 2V JH1 water pump system with tank Bwedpfx Aoulianjm Ter 2023, Two station pump unit with flow meters, 0.9Kw rating per pump, with 6000l insulated tank 2100mm x 2100mm x 1500mm, pumps in housing, 3Ph

Condition: ready for operation (used), functionality: fully functional, 7 units x Ventherm system for surface treatment systems, including a hot air unit with aluminum and copper water heating registers, individual cross-flow heat exchangers for heat recovery, and a ventilation system. Bwsdpfxszpzqtj Am Ter We are open to offers for 1-7 units. Inspection is welcome.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg Bwedjy A Tpqspfx Am Tsr - immediately available -

Condition: used, Paint pouring machine, paint pouring machine, paint pouring station, paint pump, emulsion pump, dosing pump -Gearbox: Stöber Type R27-0000-110-4 Bwjdpfjfv H Aiex Am Tor -Speed: 800 - 1820 rpm -Engine: HEW type EEXF-S/4 -Power: 1.1 kW -Dimensions: 300/400/H935mm -Weight: 43kg

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Bwedpfx Aszinzlsm Tjr Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 2,900 mm, total length: 1,100 mm, total width: 3,150 mm, working width: 3,000 mm, Manufacturer: Heimer Model: TSW-R 22-22 Year of manufacture: 2007 General / technical data: Used spray booth with dry filter technology (TSW). The spray booth has a modular design and can be connected to an exhaust unit. The filter mats above the paint booth absorb the particles during the painting process within their structure. Due to the modular design, the filter mats can be easily replaced. Bwsdpfezlrrmox Am Ter Dimensions (h x w x d): 2900 mm x 3150 mm x 1100 mm

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Bsdpfxjy Tiaas Am Tswr Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: used, Year of construction: 1998, functionality: fully functional, Every piece of equipment has its time, and we have decided to give away our paint booth. Deadline: by the end of September. This is a unique piece, which we assembled, expanded, and maintained ourselves. We would like to give away the paint booth itself, the exhaust system, the water curtain, and everything else you see in the pictures. Bsdpfx Amezl Ambe Tewr We are currently still using this system for painting – it is fully functional. The buyer must disassemble the system themselves. Delivery terms: Collection from our factory in Königsbach-Stein. You are welcome to visit us at any time to inspect the equipment on site.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Bwsdpsun R Ufefx Am Ter Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: MKR30029343, MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Bwjdoy Tn Rkopfx Am Tor Power: 6.2 kW FEATURES CE marking MAKOR unloader is not included in the scope of supply.

Condition: good (used), Year of construction: 2016, total height: 2,640 mm, total length: 3,300 mm, total width: 3,960 mm, volume flow: 8 m³/h, Equipment: cabin, Technical Details: 75 m³ area including paint booth, drying booth, and paint storage room. Paint booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: air intake from the air-conditioned area - Air supply: 8,000 m³/h Drying booth: - Internal dimensions: 3300 x 3960 x 2640 mm - Floor area: 13.1 m² - Internal volume: 34.5 m³ - Heating method: electric heating cartridges, 22 kW, 3x400V - Air supply: 2,500 m³/h Paint storage room: - Internal dimensions: 3100 x 2000 x 2600 mm - Heating method: air intake from the air-conditioned area Bsdpfx Ameyhbggj Towr - Floor area: 6.2 m²

Condition: good (used), Year of construction: 1989, functionality: fully functional, Equipment: cabin, Manufacturer: Garmat Belgium Type: M 6/7A Year of manufacture: 07/1989 Work area volume: 70.5 m³ Fan capacity: 24,000 m³/hour Motor power: 7.5 kW Gas burner: 200 kW Total electrical connection value: 14 kW Operating voltage: 380/220 V The 24,000 m³/hour and 200 kW gas burner make this a serious, professional booth, not a hobby version. Bsdpfx Aezcfp Iem Towr Fully functional; Burner and fan are operating; Filter system is complete; No significant rust damage. Internal length: approximately 6.70 m Internal width: approximately 4.0 m Internal height: approximately 2.5 m. The dimensions are approximate. External dimensions: 6.85 x 600 x 310 (approx.) The booth can be inspected, and it must be dismantled by the buyer. We will arrange for a forklift to load it.

Condition: used, Used hydraulic pump system with 4 pumps and an approximately 200-liter reservoir, including a collection basin. Bsdpezi Sn Aefx Am Tjwr

Condition: good (used), Paint unit, paint pump GRACO MERKUR + Graco G40 gun. Bwsdpsulc S Rjfx Am Tjr

Condition: new, Year of construction: 2026, Equipment: cabin, Painting/spraying booth The professional Reinox 300×185 painting/spraying booth is designed for partial painting and spraying in production facilities where controlled filtration and safety measures are required in an environment with explosive materials (ATEX). Thanks to its powerful extraction system and three-stage filtration, a clean working environment is ensured even during intensive operation. De Dsia Ta Hskryqzeci !! This is always a new machine (photo from customer installations). We are the manufacturer. !! Technical specifications: - The fan is certified for ATEX zone 22 - Extraction area: 3,000 × 1,400 mm - Power supply: 400 V / three-phase - Control: frequency inverter – stepless power adjustment via a potentiometer on the control panel. - Filtration: three-stage filter Certifications & documentation: CE, ATEX, complete technical documentation Warranty: 12 months Option to order machines in various individual configurations and sizes! Do not hesitate to contact us. Bodozkfnrepfx Am Tjwr

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum. Bedpfx Ajx Aqa Dsm Towr

Condition: used, This listing is for the Quattroflow QS15SU Fluid systems pump The unit is in full working condition and is ready for immediate use The Quattroflow 15SU is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech, food or cosmetic research centres or plants. Examples: Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) Solutions of polymers or suspensions (silicon, latex, chromatography media) Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) colloidal solutions Suspensions of viruses or phage Dairy products Gelatine Bwsdpjxl Er Hefx Am Tor Supplements and ingredients for cosmetic and food

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring Bwjdjxwc Euspfx Am Tsr IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: ready for operation (used), Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Bwodpfx Amjw Au Twj Tor Width: 700 mm Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Type: SAH 235 Pressure range: +650 to -470 mbar Max airflow: 240 m³/h

Condition: used, Year of construction: 2008, functionality: fully functional, Technical specifications: Washing booth: Bjdpfxjzdc D So Am Tswr Manufacturer: Hege Year of construction: 2017 Washing equipment: Steam cleaner, electrically heated Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 8000 x 5000 x 3000 mm Preparation room Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air Heating: Gas burner Dimensions: (l x w x h) 5140 x 4120 x 3000 mm Painting booth Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Supply and exhaust air / Recirculation mode possible Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 1 Manufacturer: Walther Pilot Year of construction: 2008 Ventilation: Recirculation mode Heating: Gas burner Dimensions: (l x w x h) 6250 x 4120 x 3000 mm Drying 2 Manufacturer: Hege Year of construction: 2017 Ventilation: Recirculation mode Heating: Pumped hot water Dimensions: (l x w x h) 5840 x 4120 x 3000 mm Lift and lower station Manufacturer: Hege Year of construction: 2017 Lifting capacity: 980 kg Manual push conveyor: Year of construction: 2008 / Extension 2017 Load capacity: 400 kg/m Operating mode: manual

Condition: used, Year of construction: 2001, SUPERFICI UV lamps Type: TU166/35-3UV55 Bwjdozg Ht Uspfx Am Ter Effective working width: 1300 mm 3 UV radiators with a power of 120 W/cm Tube conveyor with adjustable speed: 4-16 m/min External air filters Lamp dimensions: 250x360x160 cm Control cabinet dimensions: 80x200x210 cm

Condition: used, Year of construction: 2014, functionality: fully functional, Water supply unit, Wilo Helix VE 1605 pump. 1 unit Wilo Helix VE 1605 vertical high-pressure centrifugal pump in inline design. Water capacity up to 30 m³/h, delivery pressure up to 86 m/water column (see attached performance curve). Motor 5.5 kW, 3 x 400 V. With electronic pump control with frequency converter for electronic speed regulation. 2 units in stock. Price per unit. Bedpfxjwvh N Ej Am Tjwr

Condition: used, Year of construction: 2024, operating hours: 300 h, functionality: fully functional, 1. MERKUR Airless Pump 45:1 Bedpfx Ajyx Irljm Tewr Ratio: 45:1 Maximum fluid output pressure: 310 bar Maximum air inlet pressure: 6.2 bar Fluid flow at 60 cpm: 3 lpm Volume per cycle: 50 cc Air consumption at 7 bar and 20 cpm: 0.48 m³/min Fluid inlet: ¾” Fluid outlet: 3/8” Includes: wall mount, surge filter, suction hose, suction pipe, suction filter. 2. XTR 5 Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid passage: 2.3 mm Fluid inlet: ¼” Weight: 411 g Dimensions: length 111 mm x height 180 mm Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 Ratio: 30:1 Maximum operating pressure: 207 bar Maximum tip size: 0.019” Fluid flow at 240 cpm: 1.5 lpm Air inlet: 3/8” Fluid outlet: ¼” Minimum compressor capacity: 1.5 HP Includes: wall mount, suction hose, suction pipe, suction filter. Key advantages: convertible wall mounting, pneumatic motor, consistent finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun Maximum fluid pressure: 345 bar Fluid inlet: ¼” Weight: 510 g Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braid Braid: AISI 304 Inner tube: Teflon Applications: chemicals, solvents, steam. Length: 10 metres Diameter: ¼"

Year of construction: 1995, condition: used, machine/vehicle number: 14165 / 14166 / 14167, Performance: 6 m³/h Pressure: 16 bar Head: 34 m Speed: 2,750 rpm Power input: 1,530 W Max. temperature: 25° C Description: Pump system consisting of three identical pumps; Pressure vessel for nitrogen, 8 liters, 16 bar, up to 70° C Bodpfjcq Uggex Am Tjwr Condition: very good Weight: Dimensions: 800 x 400 x 600 mm

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, Bsdeiv Huwepfx Am Tswr 4 double strokes per 1 liter of material, with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, available from warehouse in Seevetal, subject to prior sale.