Used Airless Paint Sprayer for sale (4,170)

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm Bwodethcflopfx Aiwjw The devices are very little used! Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Bsdpfx Aie Afpiyeweww

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Location: in stock at 54634 Bitburg Bwedpfsy A Tpqsx Aiwew - immediately available -

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Bwodpfx Aiezinzlowsw Weight 45 kg Good condition

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. Bmt7r28v0e They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes The toothed belt transmission ensures quiet operation Maintenance-free AC motor Bwsdpfxof Aad Nj Aiwew Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar Bwedpfow U T Atjx Aiwjw -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Condition: excellent (used), Year of construction: 2022, operating hours: 326 h, functionality: fully functional, machine/vehicle number: A20221005, feed length X-axis: 5,500 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 100 mm, workpiece weight (max.): 500 kg, working width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Auction of a fully automatic coating system consisting of the following components: VEN SPRAY SMART spraying system VEN MOVE TRANSFER VEN TRANS BELT (x3) VEN TRANS BELT with dust protection hood VEN MOVE TRANSFER with drying chamber Air supply unit HC12 The system was installed in 2022 and was in operation for approximately 1 year (326 operating hours in pistol drive). TECHNICAL DETAILS VEN SPRAY SMART spraying system (year of manufacture: 2019) Feed speed: 1.5-4.0 m/min Working speed: 2.0 m/min Working height: 920±20 mm Working width: 1,300 mm Min. workpiece size: 300 x 100 x 10 mm Max. workpiece size: 3,600 x 1,200 x 50 mm Coating material: water-based paints, solvent-based paints Spraying process: Air, Airmix, Airless Bwodpfx Aiozlxilewjw 326 operating hours VEN MOVE TRANSFER 180° (year of manufacture: 2022) Length: approx. 6000 mm Width: approx. 8,078 mm Speed: 3.2 m/min Max. load: 20 kg/m 766 operating hours 3x VEN TRANS BELT belt conveyor (year of manufacture: 2022) Length: approx. 5,635 mm Outer width: approx. 1,511 mm Working width: approx. 1,300 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m 766 operating hours VEN TRANS BELT with dust protection hood (year of manufacture: 2022) Length: approx. 3,800 mm Working width: approx. 1,300 mm Working height: 920±20 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m VEN MOVE TRANSFER with drying chamber (year of manufacture: 2022) Length: approx. 6,000 mm Width: approx. 8,078 mm Conveyor speed: 3.0 m/min Max. load: 20 kg/m Drying chamber manufacturer: Adolph & Co GmbH Min. exhaust air volume: 1,200 m³/h Operating hours (see image) Belt: 766 h Ventilation: 1,620 h Pistol drive: 326 h EQUIPMENT Fully automatic coating process Multi-layer coating programmable Automatic control of the entire coating process 6 freely programmable spray guns Suitable for water-based and solvent-based paints Suitable for automated coating processes in industrial applications

Condition: good (used), Painting unit, paint sprayer – GRACO MERKUR + Graco G40 spray gun. Bwsdpfxjz Sb Nnj Aiwsw

Year of construction: 2011, operating hours: 1,050 h, condition: excellent (used), functionality: fully functional, Our machine enables the execution of all basic tasks for road marking. It features a line programmer and also offers the possibility of marking edge lines and adjusting the operator’s seat. Bedpjz Tdykofx Aiwoww The machine can be equipped with up to five automatic spray guns for paint and five guns for glass beads. It has paint tanks with a capacity of 192 kg and two 40 kg tanks for glass beads. Self-propelled machine with its own drive system. Line programmer. Pressure system for applying glass beads. The machine is equipped with: three automatic paint spray guns or one applicator for two-component material; three automatic guns for glass beads; one hand gun. Hydrodynamic paint spray system (airless) or dosing system for two-component material in a mixing ratio of 98:2. Two paint tanks, each with a capacity of 60 liters. Pressure system for glass beads with two tanks, each with a capacity of 25 liters. KOHLER drive engine with 25 hp. Hydraulic drive for the paint pump. Paint pump flow rate: 11 l/min. Maximum operating pressure: 228 bar. One nozzle for the hand gun. Three nozzles for marking lines with a width of 12 cm. One nozzle for marking lines with a width of 24 cm. 250 g of oil for the pump piston rod. Three nozzle guards. High-pressure filter with a filter fineness of 50 mesh. Pneumatically raised targeting pointer for aligning the marking. Marking unit mounted on a wheel, which is pneumatically pressed onto the road surface.

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara Bsdpfsqzx Nksx Aiwsww MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M Bwedjd Nnb Ropfx Aiwsw 1ks. Tank Kovofiniš. On stock. Sellable immediately. Total price 1000 Euro.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, REF: MM6428 1 x PFM flow wrapper with peg and chain infeed conveyor and painted mobile frame.  Manufacturer - PFM Packaging Machinery S.p.A. Model - Swift.  Date of manufacture - 2011.  Electrical requirements - 230 V / 50 hz / 1 phase. Power - 14.5 Amps / 3.1 kW. Overall dimensions - 4150mm long x 950mm wide x 1950mm high. Adjustable folding box - up to 90mm wide.  Can wrap using clear or printed film. Supplied without the adapted infeed system, will be back to the standard infeed system. The PFM Swift is a horizontal flow-wrap machine with rotary crimp jaws, designed to wrap at speeds of up to 100 bags per minute. Bsdpfxjy Unmuo Aiwjww An extremely versatile, compact and reliable machine, the Swift will accomodate a wide range of products, with its standard adjustable forming box, providing the solution to quick and efficient size changes.

Condition: used, Year of construction: 2002, -with belt cleaning at the machine outlet under a folding table with belt conveyor. In 2021, the PLC control, the touch screen control, and the frequency converter for the spraying-gun drive were replaced. - Manufacturer: Venjakob - Type: HGS-Duo/C - Retrofit 2026 (year of manufacture 2002) - Working width 1,300 mm - Operating side right - Price for refurbished machine - Current condition, in the refurbishment phase - Gun drive in duo design - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 Bsdpfjzv Tfcjx Aiwjww - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The pictures are examples of an unrefurbished spray machine of the same type. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2000, with new ASCOM gunl control, PLC, light curtain, and touch panel, mounted at the inlet of the automatic sprayer. - Manufacturer: Venjakob - Type: VEN SPRAY Duo - Retrofit 2026 (year of manufacture: 2000) - Working width: 1300 mm - Right-hand operation - Price for reconditioned machine - Current condition, in the reconditioning phase - Duo pistol drive - Dry extraction - Exhaust air capacity 10,000 m³/h - Extraction nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 5 and 14 m/min - With belt cleaning system - With paint recovery via V-belt system - Gun control, touch screen - Installed color circles 1 pc. - 4 Airelss sprayers, Krautzberger KAA1300 - 1 HD airless pump - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total connection ~ 19kW - Length: 6,485mm - Width: 3,690 mm Bedpfxszv Tcne Aiwoww - Height: 2,497 mm - Volts, Hz 400 / 50 - Color light gray 7035 + black - Location, in stock - Voltage fluctuations max. +/- 5% The photos show only one example of a refurbished automatic sprayer. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Bedpfx Aiezv Tdfowsww Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, functionality: fully functional, gearing type: hydrostat, fuel type: diesel, color: white, Year of construction: 1992, operating hours: 4,470 h, Equipment: air conditioning, cabin, Line marking machine: + Euroliners + Bagheera + Year of manufacture: 1992 + 4,470 operating hours + Vehicle base: Hansa APZ 1003H + Optional 4-wheel steering + Hydrostatic drive + 4-cylinder Mercedes diesel engine + Hand sprayer at the rear + 2x paint tanks + 2x bead tanks + Bead and paint spraying + Sight rod with mirror + Compressor + Airless pump Bsdpfx Ajw T Tkbeiweww + Line marking computer elexar 20 + Rear warning system + Air conditioning + From municipal ownership Receive all newly listed vehicles by email – subscribe to our NEWSLETTER! Errors and typos may occur, interim sale reserved!

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), gearing type: hydrostat, fuel type: diesel, color: white, operation weight: 1,900 kg, axle configuration: 4x2, number of seats: 1, Year of construction: 2003, operating hours: 1,768 h, Equipment: onboard computer, Road Marking Machine: + Euroliners + Trassar 201A + Year of manufacture: 10/2003 + 1,768 operating hours + 1,900 kg + 3-cylinder diesel engine, 36 hp + Hydrostatic drive + Articulated steering + Protective roof + Rear warning device + 2 bead containers of 130 L each + 2 paint tanks + bracket for a third tank on the right + Airless pump Bedpfsyhd E Sex Aiwsww + Compressor + Guide rod and spray boom hydraulically adjustable + Machine from municipal ownership Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and changes excepted, subject to prior sale!

Condition: used, Year of construction: 2018, operating hours: 2,040 h, Makor Spraying Robot RoboSTAR M – 2018 Makor RoboSTAR M spraying robot, manufactured in 2018 and in good working condition. The machine has low operating hours and has been well maintained, making it an excellent option for automated spraying applications. Ideal for businesses looking to improve efficiency, consistency, and production capacity. Bsdpozw Hzaofx Aiweww

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: lighting, Modern painting systems and drying rooms must meet higher requirements than just a few years ago. The use of new coating systems, such as hydro-based paints, polyurethane resins, and epoxy-zinc powder or epoxy-iron glitter paints, demands advanced paint room solutions. A key aspect is the workpiece transport to the painting system and further processing. Our engineers offer expert guidance, whether it's dry overspray removal, wet washing, air humidification, or air drying, condensation drying at low temperatures, or hot air drying. We also provide pre-treatment solutions such as high-pressure washing with water circulation systems or compressed air blasting or wheel blasting techniques. Key Components of a Modern Painting System: Painting Booth: The key element of our system, equipped with advanced air filtration and ventilation systems to ensure a dust-free environment for top-quality results. 🎨 Air Treatment: Essential for maintaining the air balance in the spray booth by drawing in filtered air to replace the air exhausted by the ventilation system. 🌬️ Exhaust System: Removes overspray and volatile organic compounds (VOCs) from the booth, ensuring good air quality and operator safety. 🌿 Drying & Curing Oven: After painting, parts are transferred to the oven to cure and obtain a durable, high-quality surface. 🔥 Conveyor System: An automated conveyor moves parts from the spray booth to the oven, ensuring efficiency and consistency. 🚜 Control Panel: The brain of the system, where the operator controls everything from ventilation to temperature and conveyor speed. ⚙️ Lighting: LED-based lighting provides excellent visibility while also offering energy savings. 💡 Why Choose Our Painting & Drying Systems: Quality: Carefully designed with advanced features to ensure greater efficiency and performance. 🎯 Safety First: Efficient exhaust systems, fire suppression, and fire-resistant materials ensure a safe working environment. 🛡️ Customization: We offer customizable solutions that cater to your specific needs and preferences. 🛠️ Easy Maintenance: Our systems are designed to be easy to maintain, with durable and easy-to-clean materials. 🔧 Excellent Support: We provide top-notch customer service and technical support for installation, troubleshooting, and optimal maintenance. 🧰 Environmental Responsibility: Our systems are designed to be energy-efficient and environmentally friendly, minimizing pollution and making them a sustainable choice for surface treatment. 🌍 Bsdpfxeun R Ufj Aiwsww Complete Solutions for Painting Systems: Conveyor Systems: Automated transport systems for painting and blasting booths, with intersections and switching systems for parts up to 2000 kg. 🚛 Easy-to-Replace Filters: Painting booths with ceiling exhausts and easy-to-replace filter elements. 🧹 Versatile Heating & Drying Solutions: Heating options include oil, gas, or electrical heating, as well as cross-flow heat exchangers and activated carbon filters for solvent-heavy processes. 🌡️ Integrated Paint Supply System: An integrated paint supply system with airless pumps for full coverage in the painting booth. 🎨 Our complete solutions provide everything you need for efficient and safe painting operations. Get in touch with our experts today to optimize your painting system!

Condition: used, Year of construction: 2015, operating hours: 217 h, functionality: fully functional, axle configuration: 1 axle, suspension: steel, Equipment: ABS, trailer coupling, This trailer sweeper from the renowned AEBI Schmidt company, model TSS 112, is primarily used for snow removal and also for spreading salt on surfaces, and can also be used as a standard sweeper. In short, it has 2 main applications in winter: Bwedpfx Aiszyk Nmowew Snow removal + salt spreading In summer, it functions as a sweeper + water sprayer. The sweeper has had only one owner, who used it sporadically, as evidenced by the low number of operating hours (203 hours). The snow removal unit is fully functional, regularly serviced, and lightly used, mainly in winter for snow removal and salt spreading. The brushes are practically like new! Equipment for spreading wet salt or water: Tank volume: 2,500 L Distribution systems: Spray nozzles Spray width: 2.2 - 3.6 - 5.0 m Mounting/storage system: Trailer Speed control system: Increases work speed to 40 kilometers per hour Ballast weights Own weight: approx. 2,135 kg Sweeping unit Brush width: 1,800 mm Sweeping width: 1,620 mm Note: The stated price is net and applies to export sales and for businesses. A significant discount is possible for individual customers. We invite you to contact us directly by phone to get your best price. — After price negotiations, we are able to provide detailed information and, for a serious buyer, record a video or perform a computer test or paint thickness measurement, so that you can confidently purchase the equipment remotely. — Of course, we strongly encourage you to come and inspect the equipment in person, but if that is not possible, this form of purchase will be available, guaranteeing a secure transaction.

Condition: used, Year of construction: 2011, Length 5000 mm Width 100 mm Height 2800 mm Year 2011 0 Range + Heine Conveyor Technology with Reiter electrostatic airless spray technology. Bsdpfx Aisy Ty E Howeww Fully automatic industrial painting and coating line for wooden windows, window frames, doors, and wooden elements for sale on behalf of a client. Viewing available. ----- ----- Technical Manufacturer’s Description (Summary): Item 1 Conveyor System: Power + Free circular conveyor, frequency-controlled drives, buffers, stop stations, crossbeams, steel structure according to layout. Item 2: Flood Coating System: flowcomat II-P for priming/pretreatment. Item 3: Spraying Technology: Reiter MAE 7-059 electrostatic airless spray systems with automatic spray nozzles. Item 4: Lifting Technology: MH2T mechanical lifting devices, lifting range approx. 3,200 mm. Item 5 Material Supply: High-pressure paint supply, insulated material supply, paint changeover, ring line, flushing agent supply. Item 6 Control System: Siemens S7-300 for conveyor technology as well as Reiter control system with workpiece recognition and high-voltage power supply. Item 7 Documentation (available separately): Range + Heine order confirmation, layout plan, Reiter order confirmation, and technical descriptions available. ----- Key Technical Specifications: Workpieces: Wooden windows, window frames, doors Workpiece length: up to approx. 5,000 mm Workpiece height: up to approx. 2,800 mm Capacity: approx. 60 window units per shift Coating systems: water-based systems / low-VOC Control system: Siemens S7-300 Electrostatic: 100 kV / 1 mA ----- ----- Price of the above machine available upon request! ----- Price is ex-location. Dismantling, decommissioning, packaging, loading, and all transportation etc. are the sole responsibility of the customer and are not included in the sale or provided by the seller. Further technical data and information in the attached PDF! ----- (Technical specifications according to the manufacturer—not guaranteed!) All prices listed are net, plus applicable VAT.

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A - Volts, Hz 400 / 50 - Location, in stock Bwjdpfx Aiezv Tgtswsw - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Year of construction: 2007, Technical Specifications: - Manufacturer: Venjakob - Model: VEN SPRAY Comfort - Retrofit 2026 (Year of manufacture: 2007) - Working width: 1.300 mm - Control panel on the right - Price for a refurbished machine - As-is condition, not refurbished - Dual-gun drive system - Dry extraction - Exhaust air capacity 7.000 m³/h - Exhaust nozzle diameter 500 mm - Belt conveyor system - Feed speed approx. 3–7 m/min - With belt cleaning system - With paint recovery via V-belt system - Automatic part detection via light curtain - Spray gun control, touch screen - 1 paint circuit installed - 4 airless spray guns, Krautzberger KAA1300 - 1 high-pressure airless pump - Supply air filter cover - Suitable for water-based paints - Suitable for solvent-based paints - Control cabinet integrated into the machine. - Total power consumption ~ 23 kW Measures: - Length: - Width: 3,690 mm - Height: 2,520 mm (2,360 + 440 mm) - Volts, Hz: 400 / 50 - Color: Light Gray 7035 + Black - Location: Not in stock, available from August 2026 - Voltage fluctuations: max. +/- 5% Some images are examples of a refurbished automatic spray machine of the same type._____Optionally, we can also provide you with a quote for installation and commissioning of the system, as well as employee training Bedpezv Tf Aofx Aiwoww Upon request, we also offer regular maintenance and servicing of the machine. For further information, please feel free to contact us!

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 Bwjdpfx Aod Ih R Hoiwow 7 bar

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW • Working height: approx. 900 mm Bedpfxox Iggys Aiweww