Used Ais for sale (391)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, laser source manufacturer: Bodor, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. Psdpfjhwhfmex Abusrc With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Prjdehwhf Uspfx Abuec Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. The pu Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 3048*1524mm Pjdpfxjhwmdro Abuerc Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 3000*1524mm Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Cutting Speed: 0-100m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Psdpehwrgtjfx Abusrc Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. Pjdpfx Ajhwrg Eobuorc The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, A compact design sheet fiber laser metal cutting machine with complete protection Small occupied space balances complete protection and higher safety. Each frame of the cutting machine bed is welded after mortise-and-tenon joint to achieve perfect mechanical property and better stability and firmness. Prodpfx Ashwv Rnebuoc The pull-out cutting machine table, with the electric table optional, saves space occupation and freshen up the user operation experience. Convenient and fast open&close with one click; The laser cutter door is safe and reliable, by using rack-pinion transmission mode combined with self-locking cutting machine system Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W, 12000W Cutting Area: 1000*1500mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2025, Working Area: 24500mm*3200mm Laser power: 40000w/30000w/20000w/12000w/6000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Speed: 80m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years 1.Ultra Large Cutting Area Maximum cutting area could be 24500mm*3200mm. 2.Active Anti-collision Function Prodog Dgbajpfx Abujc Effectively reduce the damage rate of laser heads, help you save maintenance cost. 3.Gas-saving Nozzle with Steady Flow Cutting performance and efficiency are improved by maintaining gas flow steady with least turbulence.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. Psdpfsh S H N Aex Abujrc With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, Year of construction: 2026, functionality: fully functional, The GWDress-250 smartline is the intelligent solution for the precise dressing of grinding wheels up to Ø 250 mm. Thanks to selectable manual or automatic control, dressing processes can be designed with maximum flexibility and efficiency. Performance Data: Rotary axis & feed axis CNC controlled Podpfx Abjw E E S Aoujrc Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Country of Origin: Austria

Condition: used, Year of construction: 2013, Ashton Industrial model AIS-3350/XDIA D Refurb Edge Detection Unit/Arriser. Serial no: 8343 (2013) Pjdpe Afwwgofx Abuerc Location: These lots are located in Wellingborough, Northamptonshire, UK

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Prjdoz Ru Eropfx Abusc Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Usage: Cooling or Heating of Viscous Products Previously Used on: Yoghurt and Juice Pastes Pump: Mono Pump Meters of Tube in Tube: 13 Condition: Very Good Available: Immediately

Condition: used, Year of construction: 2009, AI Overview A 13-meter tube-in-tube heat exchanger paired with a mono (progressive cavity) pump is a heavy-duty industrial setup designed for continuous heating or cooling of high-viscosity, abrasive, or fiber- and particulate-laden fluids (such as wastewater sludge, digestate, food purees, pulps, or industrial effluents). [1, 2, 3] Core System Components & Description Tube-in-Tube (Double-Pipe) Heat Exchanger (13 Meters): Design: Consists of a concentric layout where a smaller inner tube (often corrugated to boost turbulence and heat transfer) is nested inside a larger outer shell tube. Flow Configuration: The process fluid flows counter-currently through the inner tube, while the service/heating/cooling medium flows through the annular space between the inner and outer tubes. Length & Scale: A 13-meter run (frequently modular or multi-pass/series-connected units mounted on a skid frame) provides an extended thermal exchange surface area suited for duty points requiring significant temperature delta (Δ T) without clogging. Handling Solids: Ideal for fluids containing suspended solids, large particles, or fibers up to tens of millimeters that would choke standard plate heat exchangers. [1, 2, 3, 4, 5, 6] Mono Pump (Progressive Cavity Pump): Function: Acts as a positive-displacement feed pump that delivers a steady, controlled, low-shear flow rate of the product medium into the heat exchanger. Prjdjz Ruxlspfx Abusc Why it fits: Progressive cavity ("mono") technology prevents pulsation and handles abrasive, thick, or high-viscosity slurries smoothly without damaging sensitive cell structures or choking under backpressure. [1] Key Applications Wastewater and sewage sludge heating or cooling. Viscous food-industry processing (sauces, pulps, creams, purees). Industrial effluent and dye-house waste heat recovery. Continuous thermal treatment requiring plug-flow characteristics and easy Clean-in-Place (CIP) maintenance Cooling: Yes Heating: Yes Temperatures: Depending on Connection Feed Pump: Mono Pump for Viscous Products CIP: This is cleaned through the CIP system Tube in Tube Legth: 13 meters including bends

Condition: used, Year of construction: 2018, Glass dimensions: Max. Glass width: 1200 mm. Max. Length: 1200 mm. Max. Glass thickness: 12 mm. Min. glass width: 150 mm. Min. length: 300 mm. Min. glass thickness: 3 mm. Silicon carbide or diamond belt size: 3350 mm long and 100 mm wide. Electrical connection values: 400V, 50/60Hz, 3 phase 13 kW/23.5 A Max. Height of the system: 1900 mm. Podpeww Ih Djfx Abusrc Max. Max. depth of the system: approx. 2000 mm. Max. Max. width of the system: 3250 mm. Condition: very good, second-hand

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, machine/vehicle number: TJGP2065, TAKISAWA TM-4000Y2 FANUC 31i B2 - TOTALLY AS NEW BUILT 2023 CNC MULTITASKING LATHE WITH UPPER & LOWER Y-AXES 10 INCH + 8 INCH STANDARD CHUCK SIZE. WITH:- Y-AXIS TRAVEL -50 +70 MM - UPPER TURRET (Y1 AXIS) Y-AXIS TRAVEL -50 +30 MM - LOWER TURRET (Y2 AXIS) CHIP CONVEYOR - RIGHT SIDE DISCHARGE HINGE TYPE (MORETECH JAPAN) AIR BLOW SYSTEM - RH SPINDLE ABNORMAL LOAD DETECTION FUNCTION WORK PHASE POSITIONING FUNCTION (C-AXIS TORQUE SKIP FUNCTION) COOLANT DELIVERY PIPE ABOVE THE SPINDLE - LH & RH SPINDLE COOLANT PUMP - 400W - 3 OFF OIL SKIMMER (OIL / WATER SEPARATOR) OIL SEPERATOR BOX HYDRAULIC PRESSURE SWITCH LED LIGHTING AUTO LUBRICATION SYSTEM AND COLLECTOR MACHINE MANUALS & OPERATOR HANDBOOKS TURRET MOUNTED MACHINE LEVELLING PLATE AUTO POWER OFF TRANSFORMER - 415V / 3PH / 50HZ STANDARD TOOLING PACKAGE TURRET COVER (6 EA) X 2 SERVO TURRET (LOWER) Y2 AXIS - 12 STATION WITH DRIVEN TOOLS SERVO TURRET (UPPER) Y1 AXIS - 12 STATION WITH DRIVEN TOOLS 8" 3-JAW THRU-BORE HYDRAULIC CHUCK ~ KITAGAWA BR-08 RH SPINDLE 10" 3-JAW THRU BORE HYDRAULIC CHUCK (KITAGAWA BR-10) - LH SPINDLE DIRECT DRAWING DIMENSION INPUT Pjdpfxjxrnwls Abujrc HELICAL INTERPOLATION FUNCTION RAKU-RAKU MONITORING SYSTEM BAR HI PRESS COOLANT PUMP (NIHON) 2 OFF CALL LAMP (3 COLOUR) BAR FEEDER INTERFACE FOR MULTI BAR MAGAZINE UNLOADER WITH PARTS DISCHARGE CONVEYOR QUICK TOOL SETTING DEVICE - MANUAL TYPE BOTH TURRETS AI CONTOUR CONTROL II CHIP CONVEYOR UPGRADE (MORETECH JAPAN) AXIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF RADIAL DRIVEN TH, ER32 OUTPUT, 6000 RPM, 1:1 RATIO, EXT COOLANT - 4 OFF MACHINE FEATURES TWIN SPINDLE, TWIN TURRET Y-AXIS CNC TURNING CENTRE. 2 OFF 12 STATION HIGH ACCURACY SERVO TURRETS LEFT HAND SPINDLE – 4,200 RPM RIGHT HAND SPINDLE - 5,000 RPM UPPER & LOWER TURRETS - 6,000 RPM LIVE TOOLING SPEED UPPER TURRET Y1-AXIS (- 50 + 70 MM) LOWER TURRET Y2-AXIS (- 50 + 30 MM) 10” + 8” STANDARD CHUCK SIZE MACHINE CAPACITIES Standard Turning Diameter Ø 215 MM Maximum Turning Diameter Ø 215 MM Maximum Turning Length 800 MM Bar Capacity Left Spindle Ø 82 MM Bar Capacity Right Spindle Ø 65 MM AXIS TRAVELS Upper Turret Travel X1 230 / 120 MM Upper Turret Travel Y1 120 (- 50 + 70) MM Upper Turret Travel Z1 800 MM Lower Turret Travel X2 210 / 80 MM Lower Turret Travel Y2 80 (- 50 + 30) MM Lower Turret Travel Z2 800 MM Travel A (RH Spindle) 900 MM LEFT SPINDLE Chuck Size Ø (10”) 254 MM Spindle Speed (RPM) 4,200 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-8 Spindle Bore Ø 94 MM RIGHT SPINDLE Chuck Size Ø (8”) 203 MM Spindle Speed 5,000 RPM Min. Indexing Angle (C-Axis) 0.001 DEG Spindle Nose A2-6 Spindle Bore Ø 77 MM Inner Bearing Dia.120 TURRETS Number of Tools (Upper/Lower) 12 Turning Tool Shank 25 MM Boring Bar Shank Dia. 40 MM Milling Shank Diameter 20 MM Driven Tool Speed 6,000 RPM Number of Driven Tools (Upper & Lower) 12 FEEDRATES Upper Turret Rapids- X1 / Y1 / Z1 20 / 12 / 30 M / MIN Lower Turret Rapids - X2 / Y2 / Z2 20 / 12 / 30 M / MIN Rapids on A (Right Spindle) 30 M / MIN MOTORS Spindle Motor - LH 18.5 / 15.0 KW Spindle Motor - RH 15.0 / 11.0 KW Turret Driven Tool Motor 7.5 / 3.7 KW Axis Feed Motors - X1 / Y1 / Z1 2.5 / 2.5 / 2.5 KW Axis Feed Motors - X2 / Y2 / Z2 2.5 / 1.2 / 2.5 KW SUPPLY 50 KVA MACHINE L 4,741 MM W 2,748 MM H 2,444 MM 9,370 KG

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. Prodpfx Aoz Iww Rebuec 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Prodpfx Abshwaa Eouoc Cooling Mode: WATER COOLING

Year of construction: 2023, operating hours: 2,470 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1257.01, Wood scanner Luxscan EasyScan Smart NEW OptiCore AI Software Laser cameras 4 Colour cameras 4 3D & scatter lasers 4 Dot lasers (softwood) 4 Automatic camera positioning fix widths LED lighting devices 4 Ingoing lengths min./max. 1800 - 6000 mm Ingoing widths min./max. 40 - 155 mm Ingoing thicknesses min./max. 15 - 60 mm Ingoing widths min./max. (W210) 35 - 210 mm Width tolerance (per board – per bundle) +/- 3 mm Thickness tolerance +/- 3 mm Max horizontal field of view for top/bottom cameras -10 / +40 mm Max vertical field of view for left/right cameras -5 / +15 mm Maximum productivity: Psdpfxeyrpaio Abuerc 30 boards of 2000 mm per minute 17 boards of 3600 mm per minute 10 boards of 6000 mm per minute Max real speed 180 m/min. 3rd generation of the high-speed optimizing cross-cut saw OptiCut 450 Quantum Operating device OptiCom Pro 15.6" Sawblade diameter 400 mm TCT-sawblade Sawblade bore 30 mm Ingoing lengths min./max. 1800 - 6300 mm Ingoing widths min./max. 40 - 200 mm Ingoing thicknesses min./max. 18 - 60 mm Cross sections generally rectangular Nominal cross sections (without board bend) min. 40 x 18 mm max. 200 x 50 mm max. 190 x 60 mm Feed speed infinitely variable max. 450 m/min. Acceleration max. 50 m/s² Motor power saw 7.5 kW (10 HP) Motor power feed system 15.0 kW (20 HP) Outfeed conveyor with 7 quick ejectors,

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, total length: 1,000 mm, total height: 500 mm, total width: 500 mm, overall weight: 550 kg, input voltage: 230 V, warranty duration: 12 months, input current: 16 A, electrical fuse: 16 A, feed length X-axis: 1,000 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, power: 3.2 kW (4.35 HP), BigRep STUDIO G2 – Large-format industrial 3D printer | serviced | PEI | AI monitoring | 12 months support For sale is a BigRep STUDIO G2 industrial large-format FDM 3D printer from our machine inventory. The machine will not be sold in an "as is" condition without inspection. Before handover, the printer will be fully technically inspected, serviced, and prepared for production by us. Special advantage: Technical support is provided by ThinkBig3D, which has many years of BigRep service experience. I myself worked for several years as a service technician directly at the manufacturer BigRep and continue to provide professional support for BigRep systems. Included in the purchase price: BigRep STUDIO G2 Complete technical inspection and maintenance before handover PEI switch plate including magnetic base PrintShield AI-based print monitoring Machine commissioning at the buyer's location Operator and user training 12 months of technical service & support from ThinkBig3D Predpszz In Ajfx Abujc Support for setup and production start-up Technical data Manufacturer: BigRep GmbH Model: STUDIO G2 Year of manufacture: 2019 Manufacturing process: FFF/FDM Build volume: 1,000 × 500 × 500 mm Voltage supply: 230 V Fuse rating: 16 A Power consumption: approx. 3.2 kW Machine weight: approx. 550 kg The STUDIO G2 is particularly suitable for the production of large-format prototypes, jigs, models, molds, functional parts and small series. Typical areas of application include automotive, machine and plant engineering, model and mold making, architecture, research & development, marine/boatbuilding, as well as art and design. PEI Switchplate The machine will be equipped with a PEI switchplate. This system facilitates the removal of components and provides a reliable printing surface for professional use. PrintShield – AI-based print monitoring In addition, the machine will be equipped with our self-developed PrintShield system. Using cameras and AI-based monitoring, ongoing printing processes can be monitored, and typical printing errors or anomalies can be detected. This provides additional process reliability, especially for large-format components and multi-day printing jobs. Commissioning & training included As part of the handover, training for the operating personnel will also be provided. Topics covered include machine operation, print preparation, material handling, print bed/PEI switchplate, basic process parameters, maintenance and care, troubleshooting, and the use of PrintShield. 12 months service & support The purchase price includes 12 months of technical service and support from ThinkBig3D. This ensures that the buyer has a contact person with extensive BigRep experience even after the machine handover. The machine can be inspected and demonstrated in Berlin by appointment. A test print is also possible after prior consultation. Price: €27,900 net plus statutory VAT – negotiable Sale by ThinkBig3D. Transport or delivery can be arranged upon request. Note regarding the images: Some of the product images used have been digitally retouched for better representation and may contain AI-generated content. The machine actually offered is shown in the original images. The technical specifications and described equipment features refer to the machine that is actually for sale.

Condition: like new (used), A large quantity of as new and unused high quality machine tool grade ballscrews for sale, all in their original packing. Great low prices, contact us if you are interested. You can check the spec with (for example) Google AI using the reference numbers given below. 1 Hiwin 423821003 645mm 2 NTN BS3212FF0852C3B 815mm 3 NSK W2803-651D-C3Z5 600mm 4 NTN BS3210FC1054C5B 1050mm 5 KOYO W2502-544Z-C3Z10 475mm 6 NSK W2803-440D-C3Z5 525 mm 7 SUBAKI 31TIFC6-750C3 760mm 8 NSK W3608 -182D-PZ10 1140mm 9 Unidentified 1125mm 10 NSK W4004-116Z-C3Z8 840mm 11 NSK W2504-401Z-C5Z 700mm 12 NSK W3203-238D-C3Z 640mm 13 NSK W4005-248Z-C3Z8 840mm 14 KOYO 4010 TF(2.5) C51150H 1150mm 15 NSK W3608-182D-PZ 1130mm 16 NSK W3608-157-PZ10 1190mm 17 NSK NSK W3202-95Z-03Z 500mm Pedpfxsy Tlnaj Abujrc 18 KOYO JG820 500mm 19 NSK W2802-117D-SPZ5 375mm 20 NSK W3606-211D-PZ10 900mm 21 NSK W4004-116Z-C3Z8 840mm 22 NSK W5008-254-C5Z10 1250mm 23 NSK W3206-1066D-C3Z10 950mm 24 NSK W3606-191D-PZ10 850mm 25 NSK W6324-20D-C5Z 3670mm 26 NSK W3620-30DE-PZ 2400mm 27 NSK 6334-6D 4650mm 28 NSK W6314-31D-C5Z 2680mm 29 NSK W3613-98D-C5Z 1800mm 30 NSK W5014-67D-C5Z 1800mm 31 NSK W3617-60D-C5Z 2230mm 32 NSK W3615 -51DE-PZ10 2130mm 33 NSK W3615 -51DE-PZ11 2130mm

Year of construction: 2006, condition: good (used), Cross belt grinding machine Ashton AIS / XDIA Model AIS/3350 / XDIA S/N XP 20100082 (from Glasmek AB Sweden renovated in 2010) Manufacture: Ashton Industrial Sales LTD / UK year of manufacture approx. 2000 Professional Heavy Duty Seaming /Arrissing Machine 2x Diamond belt cross belts High speed abrasive and diamond grinding belts 400 V , 50 Hz castor ball tables for easy movement of the glass sheets. Table dimensions: L x W X H = 3,85m x 1,20m x 0,9m Weight 600 Kg Prodpoh E T N Eefx Abuoc CE marked

Condition: ready for operation (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/4, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 955 kg, For sale: AI DR1L S lathe – very complete with accessories For sale: an AI DR1 LS universal conventional lathe, complete with an extensive set of accessories. A robust and heavily built Dutch lathe, suitable for precise turning work and various tasks in a workshop, toolmaking shop, or for the serious hobbyist. Prodpfszxgy Eex Abusc Technical specifications AI DR1 LS Center height: 133 mm Center distance: 750 mm Turning diameter above the bed: 270 mm Turning diameter above the cross slide: 145 mm Main spindle bore: 26 mm Max. collet capacity: 18 mm Main spindle mount: Camlock D1-4" Main spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe is supplied with, among other things: Various chucks Collets Taper attachment Tool holder Follow rest Various other accessories and tools And more The D1-4 Camlock spindle mount allows for quick and secure changing of chucks. With 24 spindle speeds from 45 to 4,000 rpm, a center distance of 750 mm, and a turning diameter of 270 mm above the bed, this is a particularly versatile lathe. With a weight of approximately 950 kg, it is a stable and well-built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and usable accessories. Condition: used Location: Emmeloord Asking price: € 6450 EX Inspection and demonstration are possible by appointment. If you are seriously interested or require additional information, please contact us.

Condition: excellent (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/$, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 850 kg, For sale: AI DR1 S lathe – very complete with accessories For sale: an AI DR1 S universal conventional lathe, complete with a comprehensive set of accessories. A robust and heavy-duty Dutch lathe, suitable for precise turning work and a variety of tasks in a workshop, toolmaking shop, or for the serious hobbyist. Podozxg Agjpfx Abuorc Technical data AI DR1 LS Center height: 133 mm Distance between centers: 470 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 145 mm Spindle bore: 26 mm Max. collet capacity: 18 mm Spindle nose: Camlock D1-4" Spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe comes with, among other things: Various chucks Collets DRO EASSON Tool holder Follow rest Various other accessories and tools And more Thanks to the D1-4 Camlock spindle nose, chucks can be changed quickly and easily. With 24 spindle speeds from 45 to 4,000 rpm, a distance between centers of 750 mm, and a swinging diameter of 270 mm over the bed, this is a particularly versatile lathe. Weighing approximately 855 kg, it is a stable and robustly built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and useful accessories. Condition: used Location: Emmeloord Asking price: €8750 EX Inspection and demonstration are possible by appointment. If you are seriously interested or would like additional information, please contact us.

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm Podpeznd Dyefx Abusrc - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 4796013, ROTOX CORNER PUTTYING MACHINE EPA-479 For applying putty to the weld seams on PVC window frames. 1 Contour milling unit, PLC and 4-axis CNC control. Pjdpfxez Iynfj Abuorc Pneumatic workpiece clamping for profile heights of 50 to 115 mm and profile widths of 50 to 130 mm. Remote control with screen and PC control. Base machine, profile support, window exterior, bottom. Technical data: Compressed air: 7 bar (filter pressure regulator) Voltage: 240/400V, 50Hz, 1.8kW Dimensions: 6,000x4,700x1,900mm (with WT) Weight: 960kg Year of manufacture: 2000 4 ROTOX-EPA-479-ASES 47241908 Milling unit for visible surfaces (grooves and smooth). Top and bottom. 2 ROTOX-EPA-479-FDV-O/U 47251834 CNC milling unit for sealing plane, vertical, from above and below. 2 ROTOX-EPA-479-AI-R/S-VA 47241928 Milling unit for inner corners with a radius or a bevel, including a vertical milling unit up to 23° to the vertical, from below. 8 ROTOX-EPA-479 NC PROGRAMS GEALAN 47211260 8 ROTOX-EPA-479-NCPROG-COPIES for decorative profiles 47211261 1 ROTOX-EPA-479-PE 47211270 Profile recognition in the machine (for NC program copies and profile recognition). ROTOX-EPA-479-WT426-RS Turning station ROTOX WT 426 Transport direction: to the right when viewed from the front. Frame size 350x350mm to 2,000x2,000mm, for automatic feeding, turning and further transport of window frames, with support table, drive elements and software. Table size: approx. 4,700x2,500mm

Condition: used, Thermo Fisher Scientific Thermo Fisher Scientific Flash 2000 CHNS O Analyzer with 2 x AI AS 1310 Autosamplers For sale is a used Thermo Fisher Scientific Flash 2000 elemental analyzer. The unit is equipped with two AI AS 1310 autosamplers. It is designed for automated laboratory operation. The system is used for elemental analysis in the laboratory. Sample introduction is performed via the installed autosamplers. This enables continuous and automated operation. Equipment and features: Thermo Fisher Scientific Flash 2000 CHNS O Analyzer 2 x AI AS 1310 Autosamplers Front display with status fields for operating states Gas connections for He and O2 RS232 interfaces and other device interfaces Connections for autosamplers and additional modules Power connection 230 V Accessories and parts as shown in the pictures Technical data: Manufacturer: Thermo Fisher Scientific Model: Flash 2000 Voltage: 230 V AC Frequency: 50-60 Hz Fuse: 2 x 6 A Power: 1400 VA Autosampler: Model: AI AS 1310 Supply: 24 V DC Power: 46 W per unit Serial numbers: 420126446 and 420126487 Dimensions (approx.): Main unit: Width approx. 55 to 60 cm Depth approx. 55 to 65 cm Height approx. 50 to 60 cm Overall width with 2 autosamplers approx. 100 to 120 cm Weight (approx.): Main unit: approx. 45 to 60 kg Autosampler: approx. 8 to 12 kg each Prjdpfsy D Sqvex Abujc Total: approx. 60 to 80 kg Condition: Used, with typical signs of wear and tear due to age and use. The condition corresponds to the pictures. Scope of delivery: Flash 2000 Analyzer 2 x Autosamplers Accessories and cables as shown in the pictures Important note: All information has been provided to the best of our knowledge, based on the pictures, nameplates, and manufacturer information. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.