Used All Metal Separator for sale (57,669)

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 with smarT.NC, total height: 2,800 mm, total width: 2,250 mm, table width: 920 mm, table length: 900 mm, table load: 1,800 kg, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 40,000 W, number of axes: 3, This 3-axis Alzmetall GS 800/3 vertical machining centre was manufactured in 2008. It features an impressive X-axis travel of 800 mm, Y-axis travel of 800 mm, and Z-axis travel of 500 mm. The machine is equipped with a HEIDENHAIN iTNC 530 control and a robust table surface area of 920 x 900 mm, supporting a maximum table load of 1,800 kg. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 800/3 machine we have for sale. Contact us for further details. Cedpfjz R Sz Esx Apmeri - Distance Spindle to Rigid Table: 150 – 650 mm - Table T-Slots: 9 T-slots according to DIN 650 in X-direction, 14 H12 width, 100 mm pitch, 14 H7 center alignment slot, table lowered by 80 mm - Spindle Type: Water-cooled high-frequency motor spindle with hybrid spindle bearings and oil-air lubrication - Spindle Taper: HSK-A63 according to DIN 69893 -- Max. Torque: 139 Nm at 25% duty cycle - Spindle Features: New spindle in 2025, thermal expansion compensation, sealing air seal, air blow through spindle center - Rapid Traverse (X/Y/Z): 45 m/min - Max. Acceleration (X/Y/Z): 10 m/s² - Max. Feed Force (X/Y/Z): 10 kN at 40% duty cycle - Measuring Systems: Dual direct linear measuring systems for X/Y, direct linear measuring system for Z - Positioning Accuracy (Tp): 0.007 mm according to DIN ISO 230-2 - Tool Magazine: Chain magazine with 33 tool positions - Tool Change System: Pick-up system - Max. Tool Diameter: 90 mm (full configuration) / 130 mm (with free adjacent positions) - Max. Tool Length: 300 mm - Max. Tool Weight: 10 kg - Max. Total Tool Weight: 160 kg - Tool Change Time: Approx. 2 seconds - Chip-to-Chip Time: Approx. 6 seconds - Operating Voltage: 3x 400 V - Mains Frequency: 50 Hz - Total Rated Current: 55 A - Mains Supply Fuses: 63 A gG - Required Supply Pressure: Min. 6 bar - Required Network System: TN network - Transport Dimensions: Approx. 2,250 mm (W) x 4,760 mm (D) x 2,800 mm (H) - Additional Equipment & Features: - HEIDENHAIN TS 640 3D touch probe with infrared transmission - HEIDENHAIN TT 140 automatic tool measurement - HR 410 electronic handwheel - Automatic roller shutter roof cover - Scraping-belt chip conveyor (for short metal chips up to 80 mm length) - All-round sheet steel enclosure - Stainless steel interior lining of the machining area - Work area lighting - Electrically secured horizontal sliding door with mechanical locking - Control cabinet cooling- Missing/Excluded Components: Coolant tank is NOT included (no coolant tank, no pumps, no chip flushing hose)

Condition: excellent (used), Year of construction: 1999, CNC MACHINING CENTER ALZMETALL BAZ 15 Year of construction : 1999 Top condition Technical data : X : 600mm Y : 400mm Z : 600mm Table : 750 x 450mm Main spindle : 10,000RPM Crjdpsu Spdbofx Apmoi Control : HEIDENHAIN TNC 426 24 magazine places

Condition: used, Year of construction: 1990, bore capacity in steel (diameter) 35 mm throat 330 mm bore stroke 180 mm Crodpsz Euv Ejfx Apmji table surface area 765 x 620 mm

Condition: good (used), functionality: fully functional, Data: Tool holder MK 5--- Drilling capacity with ST60 50 mm--- Infinitely variable speed ranges approx. 40 - 180 rpm + 180 - 800 rpm--- 5 feeds 0.1 / 0.14 / 0.2 / 0.28 / 0.4 mm/rev--- Table surface, 880 x 670 mm--- Cjdpfoz S U Rwex Apmsri throat depth: 385 mm---

Year of construction: 2016, condition: used, We are selling three metal separators from Sesotec. Our GF metal detectors for pneumatic applications offer optimal protection against production downtime, interruptions, and customer complaints. Crjdpfx Apeyrl Nyemsi Suitable for steel, copper, non-ferrous metals, and stainless steel. The PRICE is per unit: €1750.

Condition: used, Year of construction: 1983, machine/vehicle number: 18071, Ref. No. 25393 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling capacity in steel ST 60: 32 mm - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Drill spindle speeds steplessly adjustable: Codpfey En I Hjx Apmeri - Range 1: 130 – 480 rpm - Range 2: 480 – 1750 rpm - 3 feeds: 0.1; 0.2; 0.3 mm/rev - Throat depth: 290 mm - Maximum distance table - drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Height adjustable by rack-and-pinion and handwheel - Separate coolant unit - Drive: 400 V / 0.9 / 1.3 kW - Space requirement approx.: W 660 x H 1900 x D 700 mm - Weight approx.: 280 kg

Condition: ready for operation (used), Bench drill – ALZMETALL AB 35 S - Drilling capacity in steel approx. 45 mm Codpsznlf Ejfx Apmsri - Drilling capacity in cast iron approx. 48 mm - Spindle mount MK 4 - Arm reach approx. 350 mm - Drilling stroke approx. 180 mm - Spindle speeds / 2 stages / 65 - 1450 rpm (VARIABLE) - Automatic feed rates 0.1-0.2-0.3-0.4 mm/rev - Drilling depth stop - Table clamping surface approx. 600x460 mm - Table adjustment approx. 600 mm - Table height adjustable via crank - Column diameter approx. 200 mm - Motor power approx. 3.5 kW - Coolant system - Work light - Speed indicator Dimensions: L x W x H 1.1 x 0.7 x 2.1 meters / Weight approx. 1200 kg Errors and omissions excepted.

Condition: like new (used), functionality: fully functional, drilling capacity: 50 mm, As-new machine in particularly robust box frame design. Offered at a price reflecting its condition. Please, no private enquiries! Crsdpezx N Ewofx Apmji

Condition: used, Year of construction: 2007, Technical details: x-travel: 1200 mm y-travel: 600 mm z-travel: 800 mm distance spindle /table: 125 / 925 mm control: Heidenhain iTNC 530 number of spindle speeds: 9000 steples U/min. max. torque on the spindle: max.82 Nm switched on hours: 43363 h spindle hours: 16319 h tool changer with: 24 Plätze table-size: 1250 x 630 (Kreuzschiebetisch) mm max. table load: 1000 kg spindle taper MT: SK40 spindle drive: 13 kW feed range: X/Y/Z: 40/40/30 m/min rapid traverse:: X/Y/Z: 40/40/30 m/min feed power: X/Y/Z: 7/7/16 kN interface: ja total power requirement: 13 kW Credpfxevithzs Apmji Weight approx.: 8,0 t dimension coolant device: ca. L:1,25 x B: 0,7 x H: 1,56 m dimension machine xH: 2,4 x 3,0 x 3,3 m Main spindle: Spindle head DIN 69871, SK 40/DIN 69 871-A40 and pull stud DIN 69872 Drive technology via ball screw drive Equipment: Compact filter/coolant high-pressure system Knoll Chip conveyor/scraper belt conveyor 300mm Tool changing unit with disk magazine for 24 tools Electronic handwheel Operation via Heidenhain control panel Accessories: AL plate 1200x600x45mm with holes Ø 15mm *

Condition: used, Year of construction: 2006, functionality: fully functional, total length: 6,150 mm, total width: 2,470 mm, total height: 2,065 mm, overall weight: 13,000 kg, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, # STADLER STT 5000 Ballistic Separator – Year of Manufacture 2006 – Shafts Renewed in 2025 For sale is a regularly maintained and well-preserved ballistic separator from the manufacturer STADLER, type STT 5000, year of manufacture 2006, from our existing commercial waste sorting plant. The machine was used for the mechanical separation of various waste and recyclable material fractions and was permanently integrated into our stationary sorting line. ### Technical Data - Manufacturer: STADLER - Type: STT 5000 - Year of Manufacture: 2006 - Overall Length: approx. 6,150 mm - Overall Width incl. Motor: approx. 2,470 mm - Overall Height: approx. 2,065 mm - Overall Weight: approx. 13,000 kg - Number of Paddles: 6 - Paddle Length: 5,050 mm - Motor Power: 11 kW - Design Capacity: 12 t/h - Design Volumetric Flow: 80 m³/h ### Maintenance and Repair The ballistic separator was regularly and carefully maintained throughout its service life. Necessary repairs and the replacement of wear parts were carried out continuously. Major maintenance measures: - December 2025: All shafts of the ballistic separator were completely renewed. The investment costs amounted to approximately €80,000. A corresponding invoice is available. - 2024: All paddles were renewed. The machine is equipped with paddle coverings made of sheet metal. - Regular maintenance: The screen segments with a grain size of 50 mm are regularly replaced. These extensive measures ensured continuous investment in the maintenance and preservation of the machine. Corresponding invoices and maintenance records can be provided upon request. Crodpo Ahpa Ejfx Apmji ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible by prior appointment. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation and records of the maintenance work carried out can be provided upon request. Price on request. If you are interested or have any further questions, please do not hesitate to contact us.

Year of construction: 2026, condition: new, Metal separation system – WPS-1000 + 12,000 gauss magnetic separator Metal separation system consisting of a vibrating table, a magnetic drum belt separator, and a WPS-1000 eddy current separator. Designed for the separation of ferrous and non-ferrous metals from bulk materials in recycling processes. Crsde Afw Ukspfx Apmji OPERATING PRINCIPLE The vibrating table feeds and distributes the material evenly. The magnetic separator captures magnetically susceptible particles. The WPS-1000 eddy current separator then separates non-ferrous metals, such as aluminum and copper, from the remaining material stream. VIBRATING TABLE AND MAGNETIC DRUM BELT SEPARATOR • Vibrating table width: approx. 1,000 mm • Vibrating motor power: 2 × approx. 0.8 kW • Magnetic drum width: approx. 1,100 mm • Magnetic roller diameter: approx. 200 mm • Magnetic flux density: approx. 12,000 gauss • Conveyor belt motor power: approx. 1.1 kW • Reinforced PVC conveyor belt • Structure partially made of stainless steel WPS-1000 EDDY CURRENT SEPARATOR • Magnetic rotor with NdFeB neodymium magnets • Magnetic rotor length: 1,000 mm • Rotor motor power: 7.5 kW • Conveyor belt motor power: 1.5 kW • Variable rotor and conveyor belt speeds • PVC conveyor belt with a sealing side skirt • Enclosed separator structure • Adjustable splitter for separating material fractions • IP55-rated control cabinet with a safety system • Color: RAL 3001 Adjustable rotor speed, conveyor belt speed, and splitter position allow operating settings to be adapted to the processed material. Separation performance depends on material composition, particle size, and feeding conditions.

Condition: used, Support plate Width: 710 mm Crodpfe Agpgfsx Apmoi Length: 710 mm Height: 210 mm

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) Crjdpfx Apezd Hb Hsmji - operating instructions (machine control system) - Transport stand (homemade)

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 293 mm bore stroke: 120 mm thread cutting up to max.: Stahl M24 thread cutting up to max.: Guss M30 drill capacity in cast iron: 45 mm spindle taper MT: MK3 spindle speed:: 160-2250 Stepless U/min feed: 0,10 +0,20 automatic mm/U Distance spindle/table max.: 117/701 mm table clamping surface:: 514 x 360 mm column diameter: 115 mm total power requirement: 1,9 kW weight of the machine ca.: 285 kg dimension machine approx.LxWxH: 0,7 x 1,8 x 1,8 m - Infinitely variable spindle speed adjustment - Digital spindle speed display - Automatic quill feed - Feed lever for engaging and disengaging the automatic feed - Adjustable feed rate - Adjustable drilling depth - Clockwise and counterclockwise rotation for thread tapping - Latching emergency stop mushroom push button Crsdpfj Afhqisx Apmoi - Motor protection switch - Electrically interlocked spindle guard - Height-adjustable drilling table with table clamping and 360° rotation - Protection class IP54 *

Year of construction: 2021, condition: used, overall weight: 27 kg, terms of delivery: FCA Pegnitz Codpsz Ali Hefx Apmeri delivery time: on request terms of payment: 100% prior to delivery

Condition: used, bore capacity in steel (diameter) 45 mm throat 350 mm bore stroke 180 mm 4 speeds 30 - 765 U/min table-size 720 x 560 mm total power requirement 3,4 kW weight 950 kg Codjvuz Tvjpfx Apmjri dimensions 1200 x 800 x 2300 mm Features: - Automatic feed - Coolant system - Infinitely variable speed control - Adjustable fixed depth stop - Emergency stop foot switch - Drill chuck

Condition: used, Year of construction: 2008, Alzmetall AX 3/S Pillar Drilling Machine Pillar drilling machine Alzmetall Csdpfxjzym U Sj Apmeri Type/Model AX 3/S Condition Used Year of manufacture 2008 Technical data Drilling capacity steel E335: 40 mm Threading steel E335: M 24 Short spindle: MK 3 Overhang: 293 mm Table surface area: 515 x 360 mm Spindle-table distance min./max.: 117 / 701 mm Column diameter: 115 mm Spindle stroke: 120 mm Feed: manual Power: 1.0 / 1.6 kW Power 2: 1.45 / 1.9 kW Motor 1: 750 / 1500 rpm Motor 2: 1500 / 3000 rpm Spindle speed Option 1: 80 - 1,125 rpm Spindle speed Option 2: 160 - 2,250 rpm Vise (see photo) not included in the scope of supply! Inquiry item: Transport costs in individual offer.

Condition: used, Year of construction: 1999, x-travel 1200 mm y-travel 600 mm z-travel 800 mm Control Heidenhain type TNC 426 table surface area 1250x630 mm workpiece weight 1000 kg Tool changer 24 spindle taper ISO 40 turning speeds 30-8000 U/min Codeyqu U Nspfx Apmeri weight of the machine ca. 7,5 t dimensions of the machine ca. 4,2x3,3x3,15 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1979, Drilling capacity: 35 mm Spindle type: MK 4 Feed rates: 0.04, 0.07, 0.10, 0.14, 0.26, 0.40 Spindle speeds: 63, 125, 180, 250, 355, 500, 710, 1400 Digital display in Z-axis: 720 mm Cross slide: x = 460 mm, y = 280 mm Drilling capacity in GG 20: 45 mm With cam control Cross slide Cjdpfx Apsbn R Alomjri

Condition: good (used), Year of construction: 2001, bore capacity in steel (diameter) 40.0 mm bore capacity in cast iron 55.0 mm throat 335 mm bore stroke 200 mm bore spindles - Morse Taper MK 4 turning speeds 60 - 1.530 U/min table: 740 x 620 mm feed 0.15/0.2/0.3/0.36 mm/U total power requirement 2.6 / 3.1 kW weight of the machine ca. 850 kg range L-W-H 800 x 1150 x 2040 mm Machine comes from a vocational training workshop Good condition (!!) Features: - Heavy-duty/robust bench-mounted drill press - Drive: "VARIO" V-belt - Automatic spindle feed (0.15/0.2/0.3/0.36 mm/rev) - Stepless speed adjustment - 2 work tables with T-slots * Height-adjustable via hand crank - Adjustable drilling depth stop - Pole-changing motor - Machine light - Emergency stop button, front - Operatorâ??s manual Codpez S N Dxsfx Apmori

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process Codpfx Aez I Ub Hspmjri - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Year of construction: 2014, condition: excellent (used), Mineral Spiral Concentrator to treat pulp streams with a heavy mineral content Type K8LM5/2 Make: SWMS - South West Metallurgical Services UK Year: 2014 Credpjgak Hlefx Apmei Condition: good, little hours 2 Units available complete documenation available

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, grinding length: 500 mm, grinding width: 250 mm, total height: 1,800 mm, total length: 2,250 mm, total width: 1,400 mm, feed rate X-axis: 25 m/min, grinding wheel diameter: 205 mm, table length: 500 mm, type of input current: three-phase, table width: 250 mm, grinding wheel width: 19 mm, spindle speed (max.): 2,900 rpm, overall weight: 1,350 kg, grinding spindle motor power: 1,500 W, rotational speed (max.): 2,900 rpm, grinding spindle speed: 2,900 rpm, power: 1.5 kW (2.04 HP), grinding wheel speed: 2,900 rpm, input voltage: 400 V, disc diameter: 205 mm, Metallkraft FSM 2550 Surface Grinder Machine Type: Surface Grinder with NC Controlled Vertical Feed Year: 2018 Control: NC Control Condition: Very Good Includes NC Controlled Vertical Feed Table Enclosure Guard Electro-Magnetic Chuck Wheel Dresser Coolant Equipment Halogen Light DRO Auto-Lube Technical Specifications Grinding Wheel Diameter: 180 to 205mm Crsdpov Iq Shjfx Apmei Grinding Wheel Width: 19 to 13mm Grinding Wheel Bore: 31.75mm Spindle Speed: 2900rpm Table Dimensions: 500 x 250mm X Axis Travel Speed: 5-25m/min Drive Motor Power: 1.5kW Electrical Connection: 400V/3Phase/50Hz Machine Dimensions: 2250x1400x1800mm Machine Weight: 1350kg Notes: *Specifications are given in good faith but not guaranteed*

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60: 35 mm - Drilling capacity in steel ST 60: 40 mm - Drill spindle connection: MK 4 - Drill spindle stroke: 170 mm - Overhang: 345 mm - Rotary table with 2 T-slots: 550 mm - Max. distance table – drill spindle: 650 mm - Max. distance base plate – drill spindle: 1000 mm - Feeds: 0.09 - 0.16 - 0.28 mm/rev - Variable speed AZ gearbox with gear shift - Continuously adjustable drill spindle speeds: 40 - 720 rpm - Right/left rotation Cedpfx Apokt Nqqomjri - Drive: 400 V / 2.5 kW - Lighting - Coolant system - Space requirement: approx. W 750 x H 1950 x D 1000 mm - Weight: approx. 700 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg Crsdpfx Aohr R Iuspmsi • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.