Used Aluminium Foil for sale (3,744)

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - Max. saw blade diameter: 300 mm - Spindle diameter: 30 mm - Blade guards: 2 pieces - Pneumatic cutting (up/down blade movement) - Saw units adjustable at 45° - Manual spacing adjustment of the saw units - Min. cutting length at 90°: 220 mm - Max. cutting length at 90°: 2820 mm Bledpfx Aomv E Hxoczjr - Cutting width: 110 mm - Cutting height at 90 degrees: 90 mm - Pneumatic clamps: 2 pieces - Foot switch - Material support - Main motor: 2×1.6 kW - Dimensions (L/W/H): 3620x1100x1250 mm - Weight approx. 500 kg – Unpainted – Tilting saw units – Used saw, in very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the exchange rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, 1A Gmatick Storage Paternoster (roll rack) Bedpfjff Huwex Aczjlr The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: excellent (used), functionality: fully functional, KALLFASS Foil packaging machine with shrink tunnel Plant consists of: 1) Kallfass Universa 8060/200 foil wrapping & sealing 2) Compact 650SO shrink tunnel 3) Outfeed conveyor system - extra 4) Storage device for wrapped packages - extra Blodpfx Acjwcnqcjzor The goods to be packaged are film-wrapped and sealed inside the Inversa and then shrink-wrapped in the Compact-tunnel. Via a conveyor system the wrapped packages are transported to a parcel storage station. Further technical info => check photos Please phone or mail

Condition: like new (used), inline Foilsealer and Shrinking tunnel Make: Kallfass Type: semi/automatic shrinking tunnel Modell: Mat 1606-KS1600uni Capacity: 10-15packs/min (depends on product) Frame: Steel Bodpfxeg D Nv Tj Aczslr Range: 1600(belt)x600mm (W x H) Dimensions: L x W x H = 4000 x 2050 x 1750mm Weight: 900Kg Electric: 380V+N+E, 65Kw Condition: As-is, working condition

Condition: used, maximum load weight: 29,850 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2026, loading space length: 8,500 mm, loading space width: 2,450 mm, loading space height: 1,395 mm, loading space volume: 29 m³, total width: 2,550 mm, total height: 3,000 mm, Equipment: ABS, Kässbohrer K.SKA B / 26-12 / 27 | Aluminium box tipper | First registered 01/2024 | 29 m³ | Excellent condition ---Technical Data--- First registration: 01/2024 * Year of manufacture: 2024 * Manufacturer: Kässbohrer * Model: K.SKA B / 26-12 / 27 * Body type: Aluminium box tipper, tiltable * Volume: 29 m³ * Gross weight: 39,000 kg * Unladen weight: approx. 5,265 kg * Payload: approx. 33,700 kg * Registration country: Germany ---Dimensions--- * Overall length: 9,080 mm * Overall width: 2,550 mm * Cargo length: 7,800 mm * Internal body height: 1,395 mm * Superstructure length: 8,500 mm * Fifth wheel height: 1,220 mm ---Chassis & Equipment--- * 3 BPW air suspension axles with disc brakes, 9 t capacity each * Automatic lift axle (EBS controlled, operable from the driver’s cab) * WABCO EBS 2S/2M with RSS stability control * Safety braking system to prevent accidental driving with raised body * 6x tyres 385/65 R22.5 M+S on steel rims (ET 120) * Mechanical aluminium supports (24,000 kg load capacity) * ASPÖCK Europoint III LED lighting system, 24V, ADR compliant * Aluminium side underrun protection according to ECE R73 * Folding rear underrun protection according to ECE R58.3 ---Body--- * High-strength aluminium body, suitable for construction site use * Side walls: 40 mm thick, 500 mm profile width * Floor plate: 6 mm aluminium, wear-resistant * Front wall and tailgate: 5 mm aluminium, reinforced design * Tailgate with mud-tight rubber seal and safety lock * Manual roll tarpaulin system (680 g/m², temperature resistant from -40°C to +70°C) * Steel access platform and control station * HYVA 5-stage cylinder, controllable via pneumatic lever * Body-Fix system for vibration and noise reduction ---Paintwork--- * Chassis: MB 7350 Novagrau * Body: RAL 9006 White Aluminium * Tarpaulin: RAL 9006 White Aluminium * Kässbohrer logos on side walls and tailgate ---Condition--- Bledpfjxwf Rgox Aczjr * First registration 01/2024, excellent condition * Accident-free, immediately available * Ideal for construction site use and bulk transport For further information, please feel free to contact us.

Condition: new, Year of construction: 2025, functionality: fully functional, Waste Baler BTS-MF75 in stock and available straight away The BTS-MF75 is the ideal waste baler for compacting your loose cardboard and plastic film waste into a bale of up to 75 kg. With a can crush insert baler is even suitable for crushing individual sheet metal and plastic containers and also cans. The baling press impresses with its ease of use, safe operation and its large filling volume. By baling these valuable and recyclable materials you achieve a volume reduction of up to 90%, a significant saving on your disposal costs and you properly return the material back into the recycling cycle. Pressing force: 3.5 Ton Bale weight: up to 75 kg (material depending) Bale size: 1000 H (var.) x 700 W x 500 D mm Machine size: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (on request) Loading aperture: 700 W x 698 H mm Cycle times: 24 seconds Motor: 1.5 kW 13 Amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever control Bale trolley for removing the bales Retainer for reducing the material spring back Reel holder for 2 rolls of strapping A quality product “Made in Europe” Suitable for compacting Cardboard Plastic film and foils Cans and light sheet metal containers Canisters and light plastic containers Clothes Light valuable materials Optional extras Machine colour RAL Can crusher insert PLC auto compaction cycles with bale full light and E-stop with locking key Strap eject for easy removal of bales Strapping rolls Power supply 380 - 400 V (3 phase) Blodpeut Tk Hefx Aczjr Waste Baler, Waste Compactor, Cardboard Baler, Film Baler, Foil Baler, Packaging Plastic Film Foil, Bailer, Baling Press, Garbage Press, Trash Compactor, Baling Compactor, Paper Press, Waste Paper Press, Cardboard Press, Cardboard Compactor, Foil Press, Paper Baling Press, Waste Baler, Residual Waste Compactor

Condition: excellent (used), CATALOG NUMBER 7623 Technical data: - max saw blade diameter 300mm - spindle diameter 30mm - blade guards 2 pcs - pneumatic blade feed - saw units adjustable to 45° - manual adjustment of saw unit spacing - min cutting length at 90° 300mm - max cutting length at 90° 4600mm - cutting width 90mm - cutting height at 90° 90mm - pneumatic clamps 2 pcs - control buttons - material supports 3 pcs - main motor 2×1.1kW - extraction port diameter 2x90mm - dimensions (L/W/H) 5030x1150x1400mm Blodpfowbz Uxex Aczsr - weight approx. 500kg ADVANTAGES – Italian production – tiltable saw units – used saw, in very good condition Net price: 15900 PLN Net price: 3780 EUR (depending on the rate of 4.2 EUR) (Prices may change with larger fluctuations)

Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Bedpfxochqxxs Aczjlr Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Year of construction: 1979, condition: good (used), 1 x 90 m³ aluminum silo with extended base ring and filter housing, ø 3,000 mm. Designed for a specific gravity of 0.6 kg/dm³ (formerly used as a flour and starch silo). Manufacturer: Zeppelin Capacity: approx. 90,000 liters Diameter: approx. 3,000 mm Total height: approx. 15,950 mm + 1,200 mm guard rail Weight: approx. 4,000 kg Specific gravity: 0.6 kg/dm³ Material: Aluminum AlMg3 Food grade: yes Insulation: approx. 100 mm mineral wool with bolted cover sheet (cover sheet partially damaged, but can be repaired by us). Bedpegig D Djfx Aczjlr Connections and fittings: On the silo roof: - 1 x circumferential roof guard rail (ø 1,800 x 1,200 mm) with two access openings - 1 x hinged manhole with protective grid DN 600 - 1 x access ladder to filter housing - 2 x crane lugs In the filter housing: - 1 x flange DN 100 for filling line - 4 x vent openings DN 600 with filter bags - 3 x connection ports for control/measurement technology On the silo shell: - 1 x ventilation grid (filter housing) - 1 x filling line - 1 x personnel door (approx. 1,850 x 800 mm) The silo terminates in a 60° cone NW 1500 with inspection opening. The cone is equipped with a fluidized bed (compressed air) and a rotary valve. The silo is not equipped with rupture discs or explosion protection devices. For further details, please refer to the technical drawings and images.

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Make: Kallfass Blodpfx Acjg D Nyhszjr Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 319 00 00347, Schüco double aluminium-profile cutting saw Bljdewbt E Nspfx Aczjr

Condition: good (used), TYMC-800 Honeycomb Hot Foil Stamping Machine The latest version, with a honeycomb plate for locks. The machine is designed for hot foil stamping, hot stamping, and standard die cutting without having to remove the hot plate. The machine is brand new and comes with a warranty. Format: Die-cutting 830x590mm Gold plating 800x540mm Weight 3000kg Operating speed 25 cycles/min Foil feed 1-500mm Operating temperature 20-150°C Power supply 380V Equipment: – Electromagnetic clutch and brake – Quick-assembly frame – Control panel with touchscreen PLC programmer – Two independent feeds, controlled by stepper motors Bljdpfx Acjxzulzszor – 3 operating modes: continuous, time-delayed, manual – Four independent heating systems, saving energy – Central lubrication – Additional safety guards – Photocells – Operating tools and instructions, CE declaration – Pressure plate Machine available immediately We provide installation and training (individual pricing) 12-month warranty. The machine is brand new. Our machines are among the few that meet all the standards required for operation in Poland. Testing is available at our showroom in Radom.

Condition: good (used), axle configuration: 2 axles, first registration: 09/2003, loading space length: 8,100 mm, loading space width: 2,460 mm, loading space height: 3,000 mm, total length: 10,570 mm, total width: 2,550 mm, suspension: air, wheelbase: 1,810 mm, color: silver, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - Hardwood floor - Air suspension - Rear portal doors - Disc brakes = Notes = TRACON BOX BODY TANDEM TRAILER WITH ALUMINIUM SUPERSTRUCTURE, BPW AXLES WITH DISC BRAKES, TWIN TYRES, ABS, HARDWOOD FLOOR, DUTCH REGISTRATION CERTIFICATE = Further Information = Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Twin tyres; Max. axle load: 9,000 kg Rear axle 2: Twin tyres; Max. axle load: 9,000 kg Bedpfx Acexqmr Sjzolr Unladen weight: 5,620 kg Payload: 12,380 kg Gross vehicle weight: 18,000 kg Registration number: WJ-SR-79 = Company Information = Gast Trucks Venlo B.V. | Up to 30 images and a video available on request. Since 1998, we have specialised in the purchase, sale, import and export of used commercial vehicles. Located in Venlo (NL) | 10 km from the border | 70 km from Düsseldorf Airport | 55 km from Eindhoven Airport (NL). Transport and export documents/registration plates available at an additional cost for delivery to ports in the Netherlands, Belgium or Germany. Reservations without a deposit are not possible!

Condition: used, Year of construction: 1993, Technical details: mould plates - length / width: 500 x 400 mm Heating: Zweistufen Heizung 4,6 und 6,0 kW control: SPS voltage: 380 V (3x 20A) / 24 DC V work height adjustable: 870 - 970 mm total power requirement: 6 + 2,5 kW dimension machine xH: 2,8 x 1,1 x 1,3 m weight: 570 kg Compact angle welding machine with shrink tunnel PACKAGING MACHINE WITH SHRINK TUNNEL AND COOLING STATION AND SPECIAL COOLING FAN movable/mobile Application areas/products: -div. brochures, plans or other made of paper/cardboard in DIN A 5 / DIN A 6 Applicable films: all half tube shrink films up to 0,060mm Welding system = impulse welding, with teflonized separation seam, adjustable automatic transport of goods into the shrink tunnel further details: -Tunnel passage width: 450mm -Tunnel passage height adjustable to 100, 200, 300 and 400mm -length of the heatable tunnel hood 900mm -Prod. output of the machine depends on product and film 5 to 20 cycles / minute (manufacturer's data) -max. film width (folded half tube) 550 / 550mm at 25 - 50 my -frame dimension 500 x 500 x 290 mm = max. Verpackungsmaß Heating: -two stage heating 4,6 and 6,0 kW -Fan infinitely variable Cooling station: -outlet 300mm Bledpfxju Nu Hij Aczer -with blower Conveyor belt: -feed rate 2.5 - 12 m/min -steplessly adjustable i.d. *

Year of construction: 2000, condition: excellent (used), functionality: fully functional, 2 x 50 m³ aluminium silos with long support ring, ø 3,000 mm (plastic granulate silo) Capacity: approx. 50,000 litres Manufacturer: Eichholz Year of manufacture: 2000 Quantity: 2 Diameter: approx. 3,000 mm Cylindrical height: approx. 10,000 mm Total height: approx. 11,250 mm Weight: approx. 1,400 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge guard rail (ø 3,000 x 1,250 mm) 2 x crane eyes 1 x manhole DN 600 with vent nozzle 1 x flange DN 100 (filling) 1 x flange for level indicator 1 x threaded socket 1 1/2" (full indicator) On the shell: 1 x filling line with pipe supports 1 x access door (approx. 850 x 1,850 mm) 1 x cable protection conduit 1 x threaded socket (1 1/2") for empty indicator Blodpfxsxvtvzj Aczer Silo ends in a 60° cone with emergency shut-off slide valve. Otherwise as per photos

Condition: good (used), Make: Kallfass Type: semi-automatic Foilwrapper /shrinking tunnel Model: Combi-simplex Bodjiaumuepfx Aczslr Frame: steel painted Range: max. pack W x L x H = 600 x 380 x 320 mm Capacity: max. 600 packs/hr Dimensions: L x W x H = 2650 x 1400 x 1650 mm Weight: 650 kg Power-supply: 380 Volt – 50Hz – 11,5 kW Features: mobile semi-automatic 2 hand control Remark: good condition (some minor repairs needed)

Condition: used, Die SMIPACK FP 560a ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the SMIPACK FP 560a is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine SMIPACK FP 560a Baujahr / Year 2014 Schweißrahmen 560 x 430mm Produkthöhe / Product high max. 230mm Folienbreite / Foil width max 600mm Folienrollendurchmesser / Foil Roll Diameter max. 300mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 600-1200 PCs/hour Maschinen Abmessungen / Machine dimensions L 2.020 x W 790 x H 1.055mm Maschinengewicht / Machine weight    148 kg Stromanschluss / Power connection     220-240 V, 50-60 Hz Bodpfjxp H Udox Aczolr Nennleistung / Rated power 2.500W Nennstromstärke / Rated current 12 A Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Aluminium Scaffolding Tube 6.00 meters new – lightweight, strong, and versatile This new 6-meter aluminium scaffolding tube is a lightweight, durable pipe available in standard diameters of 33.7mm, 42.4mm, and 48.3mm. If you want to build an especially light structure using scaffolding tubes, we recommend choosing an aluminium scaffolding tube. Ideal applications include portable tables or desks. Aluminium tubes are also widely used for banner frames, whether as free-standing structures or wall-mounted frames. Naturally, we also stock all the necessary tube fittings. Aluminium scaffolding tubes custom cut to your requirements Aluminium scaffolding tube comes in a standard length of 6 meters and is available in diameters of 33.7, 42.4, and 48.3 mm. If you require different dimensions for aluminium tubes or box sections, our internal sales team is ready to provide you with advice or a competitive quote! 🔧 Specifications Length: 6.00 meters (other sizes available) Diameter: 33.7, 42.4, and 48.3 mm Bjdpew Niirsfx Aczolr Material: Aluminium Condition: New Weight: approx. 4.5 kg per meter ✅ Benefits of this aluminium scaffolding tube Lightweight: easy to handle and assemble Strong and wear-resistant: suitable for professional use Corrosion-resistant: ideal for outdoor constructions Compatible with standard coupling systems New and immediately available from stock

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: C402170003, overall weight: 500 kg, input voltage: 230 V, total length: 1,950 mm, total width: 900 mm, total height: 1,530 mm, paper weight (min.): 130 g/m², paper weight (max.): 350 g/m², heating capacity: 3 kW (4.08 HP), Type: Laminator, Film Laminating Machine Speed: 1875 sheets per hour (SRA3 format) Control Panel: Touchscreen Paper Weight: from 130 to 350 gsm Maximum sheet size: 450 x 700 mm Minimum sheet size: 210 x 210 mm Bjdpfxoxp Hhqo Aczolr Pressure: Pneumatic Features: Automatic sheet feeding and cutting system, Adjustable side support, Temperature sensor, Pneumatic pressure roller, Adjustable alignment system, Photoelectric sensor for machine stop in case of missing sheet or jam, Electronic speed control, Micro-perforating and scissor roller cutting system Condition: Brand new *Price negotiable Delivery available, depending on location.

Condition: used, functionality: fully functional, Used aluminium box for storage/transport Lid with gas struts. Bjdpfx Ajxl A R Heczolr External dimensions: 134 x 95 x 89 cm (LxWxH) Internal dimensions: 126 x 85 x 60 cm (LxWxH)

Condition: used, Aluminum silo (plastic granulate silo) standing on foot ring – used – designed for a bulk density of 0.6 kg/dm³ Capacity: 50,000 L Manufacturer: EVS Available quantity: 2 Diameter: approx. 3,500 mm Cylindrical height: approx. 6,900 mm Total height: approx. 8,100 mm (including 1,200 mm roof edge railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Top head inclination: 15° Cone inclination: 60° Equipment and connections: At the top head: Blsdpfx Asww Em Doczor - 1 x manway DN 600 with hinged cover - 1 x vent nozzle - 1 x roof edge safety railing with handrail - 2 x crane lifting eyes - 1 x flange for filling line - 1 x universal flange for measuring and control technology On the shell: - 1 x access door approx. 870 x 1,960 mm - Various pipe holders for filling pipe - 1 x filling pipe NW 80 - 1 x socket for level indicator One of the silos is additionally equipped with a single-flight access ladder with back safety cage. Otherwise as shown in the pictures and drawings.

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 347, Stretch foil wrapping machine Bodjxgh Tvepfx Aczelr

Condition: used, Die ZAPPE VM ist mit Ihrer kompakte Bauweise besonders für die Verpackung von CDs, DVDs, Büchern, Bilderrahmen oder anderen kompakten Gegenständen geeignet. With its compact design, the ZAPPE VM is particularly suitable for packaging CDs, DVDs, books, picture frames or other compact items. Blodpfx Asxm Tx Reczor Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ZAPPE VM Baujahr / Year 2010 Schweißrahmen 400 x 400mm Produkthöhe / Product high max. 230mm Foliendicke / Foil thickness 10-50 µm Leistung / Speed max. 400-1000 PCs/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1979, condition: excellent (used), 4 x aluminium silos standing on foot ring, year 1979 - used -, designed for special weight 0,6 Bedpfx Acef D Hv Iezslr Content approx. 53.000 Ltr. diameter approx. 2.400 mm Total height approx. 14.250 mm Weight approx. 1.410 kg documentation: yes, drawing Container with upper conical bottom and lower 60° cone Connections: on topsoil: 1 flange socket DN 80 for filling 1 flanged socket DN 100 on the coat: 1 manhole DN 500 2 sleeves 1 ½" the cone ends in a DN 150 flange otherwise according to drawing and photos. The silos are already dismantled and can be inspected at any time in 76694 Forst.

Condition: excellent (used), 2 x 55 m³ aluminum silos with extended support ring, ø 3,000 mm (powder silo) Capacity: approx. 55,000 liters Manufacturer: Zeppelin Year of construction: 2005 Quantity: 2 Bsdpfx Aswg Dd Hsczjlr Diameter: approx. 3,000 mm Cylindrical height: approx. 10,025 mm Total height: approx. 11,265 mm Weight: approx. 1,900 kg Bulk density: 0.6 kg/dm³ Material: AlMg3 Connections and fittings: On the top deck: 1 x roof edge railing (ø 3,000 x 1,250 mm) 2 x crane lugs 1 x manhole opening DN 600 1 x flange DN 150 1 x flange DN 100 (filling nozzle) 1 x flange DN 100 1 x flange DN 250 (with pressure/vacuum relief valve) 1 x threaded connection 1 1/2" (full indicator) 1 x threaded connection 1 1/2" (spare) 1 x silo filter (Infrastaub make) On the shell: 1 x filling pipe 1 x access door One of the silos is equipped with a double-flight access ladder with safety cage. The silo terminates in a 60° cone with a DN 150 flange including inspection slide gate. Drawing available Otherwise as per photos.