Used Amada Lc 2415 for sale (202)

Condition: repair required (used), functionality: not functional, Year of construction: 2000, operating hours: 50,000 h, machine/vehicle number: L00620269, Replaced LASMAC LC-1212 x III laser machine, not working could be renovated or would be suitable for spare parts and dismantling for scrap. Bjdpjw Dqt Nsfx Ab Dell

Condition: excellent (used), Year of construction: 1989, We are offering this Amada Promecam ITS 50-20 press brake in very good condition, manufactured in 1989. Bljdpezp Siaefx Ab Dsl Manufacturer: Amada Promecam If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2015, operating hours: 2,286 h, condition: ready for operation (used), travel distance X-axis: 780 mm, travel distance Y-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 32i-MODEL B, overall weight: 5,000 kg, spindle motor power: 7,500 W, table length: 700 mm, table width: 400 mm, number of axes: 3, This 3-axis AMADA Techster 84 surface grinding machine was manufactured in 2015. It features an X-axis travel of approximately 780 mm and a Y-axis travel of approximately 450 mm. The machine is equipped with a powerful 7.5 kW spindle motor and a magnetic chuck size of 700 × 400 mm. If you are looking to get high-quality grinding capabilities, consider the AMADA Techster 84 machine we have for sale. Contact us for further details. • Control: FANUC Series 32i-Model B Blsdpfx Aozk I Afob Dol • Power Supply: 200 V • Power Supply Type: 3-Phase • Frequency: 50 Hz • Power Consumption: 23 kVA • Full Load Current: 50 A • Spindle Motor: 7.5 kW (Reinforced) • Grinding Wheel Dimensions: Ø 355 × 38–50 × 127 mm • Distance from Spindle Center to Table: Approx. 500 mm • Magnetic Chuck Size: 700 × 400 mm • Magnetic Chuck Pole Pitch: 4 mm • LED Working Area Lighting • Oil-Cooled Grinding Spindle • Compressor Air-Cooled Spindle Cooling • Temperature Control Accuracy: Approx. ±0.1 K • Automatic Touch Probe • Highskip Feed / High Speed Skip • Ethernet (LAN) Interface • Extended Memory Control Module • FANUC Macro B • Programmable Timer for Automatic Start/Stop and Warm-Up • CE Declaration of Conformity • Band Filter System 450 (E3.1) • Coolant Tank Capacity: Approx. 450 L • Filter Fineness: Approx. 20 µm • Emulsion Mist Extraction System 1100 • IFMC Oil Mist Separator • Machine Demonstration Possible • Grinding Spindle Hours: Approx. 2,286 h • General overhaul including geometric overhaul. The machine has only operated for approximately 504 hours since the overhaul Additional Equipment • WinWop Programming Software for Windows • CGS (Complete Grinding Solutions) CAM Software • Profile Dressing Unit with TPA 100 R • Pre-Dressing Unit VPA 100 R with Motorized Diamond Wheel • Table-Mounted Straight Dresser • Diamond Dressing Arbor R100-40-0.15 CVD • Regrinding Package for Diamond Wheel (Techster 84–104) • 100 mm Diamond Wheel for Pre-Dressing Unit • 700 mm Stop Bar with Prism • MPM Automatic Wheel Balancing System • Grinding Wheel Flange for Techster 64/84 (Ø 355 mm) • Modified Grinding Wheel Guard • Operating Tool Kit (Keys and Extraction Arbor)

Condition: excellent (used), Year of construction: 2006, Year of manufacture: 2006 Bending length: 4,230 mm Column spacing: 3,760 mm Blodpfjzt Iidex Ab Del Maximum pressing force: 1,700 kN / 170 t Maximum stroke: 350 mm Weight: 14,800 kg Serial number: HFT 170-4 L N060097

Condition: ready for operation (used), functionality: fully functional, pressing force: 100 t, stroke length: 100 mm, throat depth: 400 mm, overall weight: 6,000 kg, working length: 3,000 mm, TECHNICAL DETAILS Axes: 5 Pressing force: 1,000 kN (100 t) Maximum bending length: 3,000 mm Distance between side supports: 2,600 mm Overhang: 400 mm Stroke: 100 mm Installation height: 370 mm Number of cylinders: 2 Rapid traverse: approx. 85 mm/s Working speed: 10 mm/s Return speed: approx. 80 mm/s MACHINE DETAILS Blodszxnggopfx Ab Dsl Oil filling capacity: approx. 85 l Motor power: approx. 10 kW Dimensions & Weight Dimensions (L x W x H): approx. 3,300 x 1,930 x 2,325 mm Machine weight: approx. 6,000 kg

Condition: refurbished (used), Year of construction: 1994, machine/vehicle number: HFBO 125 30 H40402, stroke length: 3,000 mm, Fully refurbished in 2019, AMADA PROMECAM 125.3 press brake, year of construction 1994. Excellent Condition. Bsdpfx Abjy Nibce Dsll If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 50 x 40 [mm] UPPER RIGHT TURRET - X/Z stroke : 220 x 220 [mm] - Rapid traverse rate : 15 [m/min] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1880 x 1390 [mm] - Machine height : 1600 [mm] - Machine weight : 1600 [kg] MACHINE HOURS - Number of working hours : 18941 [h] Bodpfjwdad Rex Ab Doll EQUIPMENT - CNC : Fanuc 21i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 / 3.7 [kW] - Max. turning diameter : 60 x 60 [mm] UPPER RIGHT TURRET - X/Z stroke : 300 x 285 [mm] POWER SUPPLY - Supply voltage : 200 [V] Bsdpfx Aewdafbsb Doll - Total installed power : 10 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1400 x 1575 [mm] - Machine height : 1670 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of hours under power : 68992 [h] - Number of working hours : 15107 [h] EQUIPMENT - CNC : Fanuc 0i-TD - Coolant tank - Parts catcher - Loading cell - Electric transformer

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bedsyzy D Eepfx Ab Dell Bending Length 2,500 mm Stroke Length 200 mm Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: ready for operation (used), Year of construction: 2011, punching force: 31 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,525 mm, overall weight: 21,000 kg, table load: 160 kg, controller manufacturer: FANUC, number of axes: 2, This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. • Working area with repositioning: 5000 x 1525 mm • Max. sheet thickness: 4,5 mm (mild steel) • Feed rate X/Y: 100 / 80 m/min (128 m/min simultaneous) • Positioning tolerance: +/- 0,1 mm • Z-turret stations: 45 • AutoIndex stations: 4 (2 x B, 2 x C) • Turret feed rate: 30 1/min • Max. number of hits: 1000/min • Machine frame: Bridge frame • Punching drive: Servo-electric Twin Drive • Drives (turret + table): AC-Servo motors • Clamps: Pneumatical • Electrical connection: 400V / 50Hz • Electrical consumption: 1 kW – 7 kW • Air consumption (machine): 250 l/min • Air consumption (Air Jet Vakuum): 250 l/min Additional equipment • Loading unit: Loader L III 300 • Sheet size min.: 1000 x 300 mm • Sheet size max.: 3000 x 1500 mm • Material thickness: 0,5 – 8,0 mm • Max. loading weight: 300 kg Bsdpfx Ajx D Hpqob Dell • Max. stack height: 300 mm • Max. pallet weight: 4000 kg (2x2000 kg) • Max. feed rate (traverse): 70 m/min • Number of suction cups: 34 pieces • Double sheet control: Yes, with sheet thickness detector • Air consumption: 510 l/min, 6 bar inlet pressure • Electrical connection: 400V • Unloading unit with Parts Remover: PR 3 UL 300 P • Part size min./max.: 150 x 150 mm / 2500 x 1000 mm • Sheet thickness: 0,5 – 3,0 mm (4 mm for EM-Serie) • Max. part weight: 50 kg • Storage table size: 3400 x 1400 mm • Max. part size for unloading clamps: 3000 x 1500 mm • Max. stack height skeleton table: 450 mm • Max. weight skeleton table: 2000 kg • Max. stack height storage table: 450 mm • Max. weight storage table: 4000 kg • Max. feed rate X-/Y-direction: 180 / 90 m/min • Air consumption: 1000 l/min, 6 bar inlet pressure • Electrical connection: 400V

Condition: used, Year of construction: 2001, pressure 70 -800 kN chamfer lenght 2505 mm distance between columns 2125 mm Control OP 2000 controlled axis 7 Blsdoyz Dgwjpfx Ab Dol throat 420 mm stroke 200 mm dayligth 470 mm table width 60 mm table height 960 mm ajustment speed 100 mm/sec working feed 10 mm/sec return speed 100 mm/sec weight of the machine ca. 6,3 t Patented Amada technology ensures absolutely correct bending results without bombing device

Condition: ready for operation (used), Year of construction: 1998, controller manufacturer: FANUC, punching force: 31 t, sheet thickness (max.): 3 mm, overall weight: 16,000 kg, total width: 6,500 mm, total height: 3,050 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,270 mm, product length (max.): 8,300 mm, number of axes: 2, CNC punch press manufactured in 1998. This AMADA Vipros 358 King features a maximum workpiece length of 4,000 mm and a maximum workpiece width of 1,270 mm. It offers a punching force of 300 kN and a maximum stroke of 40 mm. If you are looking to get high-quality punching capabilities, consider the AMADA Vipros 358 King machine we have for sale. Contact us for further details. Blsdpfszg D Atex Ab Del - Max. Workpiece Length: 4,000 mm- Max. Workpiece Width: 1,270 mm- sheet thickness: 3.2 mm- Max. Punching Force: 300 kN- Max. Stroke: 40 mm- Max. Feed Rate: 80 m/min- Infinitely Variable Feed Rate: Yes- Control Unit: FANUC- Declaration of Conformity: Yes- Conformity Marking: CE Mark

Condition: used, functionality: fully functional, Year of construction: 2008, Equipment: CE marking, angle stop, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, The machine is in good condition, fully functional, and can be tested on site. Bjdpfszkgf Eox Ab Dell

Year of construction: 1998, condition: good (used), AMADA PROMECAM ITS2 2512 CNC PRESS BRAKE MAKE AMADA PROMECAM, MADE IN FRANCE MODEL ITS2 2512 YEAR 1998 CONTROL OPERATEUR 2 Bedpfxopz Igio Ab Dsll TONNAGE 25 TONS LENGTH 1250.0 mm NO OF AXES 4 AXIS CNC GUARDING SICK OPERATOR LIGHT GUARD TOOLING FULL SET OF CLAMPS PLUS UPSTROKING HYDRAULIC PRESS BRAKE FOOT CONTROL PENDANT FULL SET OF MANUALS FULL SET OF CLAMPS SET OF TOP AND BOTTOM TOOLING

Condition: good (used), Year of construction: 2008, Used 6-meter CNC press brake by Amada Bsdey T Hltopfx Ab Dsll Type: HFE 400 6 L Capacity: 6100 x 400 tons Stroke: 350 mm Y1, Y2, X1, X2, R1, R2, Z1, and Z2 CNC controlled 9204 operating hours Weight: 36 tons Transport in 2 parts (main frame + separate lower table) Self-adjusting crowning system in the lower table 450 mm mounted on the floor foundation Dismantling and loading included

Condition: ready for operation (used), tool grinding machine working perfectly Blodoyw N D Topfx Ab Del

Condition: new, Year of construction: 2005, functionality: fully functional, Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Weld Control Easy to use programming interface For controlling and integrating projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Examples: Consumer Appliances Nuts and Studs Projection Welding Electronics and Automotive Parts Aerospace Parts Office Furniture Automotive Sheet Metal Input Power: 230-460 VAC Output Range: 1000-80,000 A Phase: Single Welding Period Range: 0-99 Description Manufacturer: Amada Miyachi Type: STA-100A Model Number: 1-1-BAKA -AEA-01 Serial Number: 17010009 Condition: Used, New AC Resistance Welding Controller Easy to use programming interface Used to control and integrate projection welders, press welders, multi-gun machines, portable welding guns, seam welders, robotic systems, swing-arm welders and other special purpose machines. Blodjwcax Espfx Ab Del Examples: Consumer appliances Nuts and studs projection welding Electronic and automotive components Aerospace components Office furniture Automotive sheet metal Input power: 230-460 VAC Output range: 1000-80,000 A Phase: single Welding period Range: 0-99

Condition: new, Year of construction: 2015, 2-spindle 2-turret machine, max. spindle speed 6000 RPM, with feeder (vibrational bowl), robot handling unit and post-process measurement unit. Control system Fanuc. Dimensions 2400 x 1650 x 1790 mm ( main unit ). SALE IN EU / SWITZERLAND / UK ONLY. Bledpfslgy U Esx Ab Del

Condition: reconditioned (used), Year of construction: 1987, functionality: fully functional, pressing force: 50 t, stroke length: 105 mm, total width: 2,000 mm, overall weight: 4,300 kg, working width: 2,000 mm, distance between stands: 1,600 mm, Promecam ITP2-050-20 Converted to Delem DA 65R control system in 2019 15" touch screen with graphics Bledpfx Aou Dm Iusb Del Bending length 2000 mm stand passage 1600 mm Bending pressure 50 T CNC back gauge X-R-Z1+Z2 axis Connected load 7.5kw Stroke 105mm Intermediate pieces Int100 Front support tables Amada tool system incl. many tools

Condition: used, Automatic High Quality Grinding Automatic High Quality Grinding Machine Type : Other All punch operators know the importance of tool maintenance on part quality and tool life. The AMADA TOGU is the solution; an automatic tool grinder design specifically for high quality grinding of sheet metal tooling. Unmanned operation Simple operator control Quick, reliable grinding of all standard tooling Supplied with jigs for shear angle grinding Restores tooling to optimum condition resulting in high quality parts Enables regular regrinding to maximise tool life USED AMADA AUTOMATIC TOOL GRINDER MODEL TOGU-III MACHINE SPECIFICATIONS Model ……………. TOGU-III Max. Diameter Tool Size ……………. 6.30 Max. Grinding …………… .039” Main Axis Motor …………… 2 H.P. 2 P Main Axis Rotation Speed ………….. 3000R.P.M. (60Hz) Main Axis Travel …………… 9.45” Main Axis Feed Motor …………….. DC Servo Motor (0.05 H.P.) Main Axis Feed Speed-High ………… 23.6 I.P.M. Main Axis Feed Speed-Middle ………. 2.36 I.P.M. Main Axis Feed Speed-Low …………. 0.002 I.P.M. Table Motor ……………. 0.134 H.P. 4P Table Rotation Speed …………… 72 R.P.M. (60Hz) Cooling Water Pump Motor ………….. 0.08 H.P. 2P Cooling Water Pump Flow …………… 0.9 CFM (60 Hz) Machine Weight …………….. 1,058 lbs Power Supply …………….. AC220V 3 Phase 2.5 kVA (Transformer Used Outside 220v Area) Air Supply …………… 60 C.F.M. Grinding Wheel …………….. CBN 5.31 Benefits: Fast and Easy to Use Fully automated machine Unmanned grinding cycle Easy operation – load ᐳ inputᐳ start Programmable re-grind amount High Quality Finish Automatic feed of wheel prevents tool burn Automatic grinding wheel dress indication Excellent surface finish Bsdpfsfuai Uox Ab Doll Safe Unique safety locking system ensures operator safety Visual operation/standby indication Coolant and Filtration System Automatic coolant application prevents tool burn High quality finish maintained by filtration of coolant liquid

Condition: used, Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake Bljdpfx Aofuaqmob Djl Used cheap Amada Its 2 2.5metre x 80ton 7axis cnc pressbrake PRESS BRAKE HYDRAULIC CAPACITY: 80 TONS BENDING LENGTH: 2500mm CONTROL: OPERATEUR NO OF AXIS: 7 FRONT GUARDS ERWIN SICK MACHINE MOUNTED SIDE AND REAR INTERLOCKEDFENCING

Condition: excellent (used), Used Amada 60ton C frame press for sale SPECIFICATION MODEL TP -60 CAPACITY 60 ton NUMBER OF SLIDE STROKES 50 Hz 45-80 strokes/ minute STROKE LENGTH 120 mm SLIDE ADJUSTMENT 70 mm SLIDE AREA (R-L x F-B) 500 x 400 mm BOLSTER AREA & THICKNESS (R-L x F-B x thickness) 900 x 550 x 80 mm SHUTHEIGHT 370 mm MAIN MOTOR 5.5 x 4 kWXP AIR PRESSURE REQUIRMENT 5.0 kgf/cm2 MAXIMUM NUMBER OF FLYWHEEL ROTATIONS 1170 r.p.m. MINIMUM AIR PRESSURE FOR CLUTCH ON STOPPING TIME 165 msec BRAKE MONITOR SETTING, DEGREES BEYOND T.D.C. 15 degree SERIAL NO. 07312665 Blsdeyk D Dtspfx Ab Dsl MANUFACTURE DATE 1992.4 MANUFACTURED BY AMADA CO., LTD.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, punching force: 20 t, 1 Used Amada EM 2510 NT Servo Electric Cnc Punch Press For Sale Make: Amada Model: EM 2510 NT Punching Force: 20 Tons (200 kN). Axis Travel (X/Y): 2500 x 1270 mm (expandable for larger sheets) with reposition Turret Configuration: Typically 45-stations with 4 Auto-Index stations. Control System: touchscreen control. Positioning Accuracy: Servo-Electric Drive: Replaces hydraulic systems with a, single AC servo motor (AE) or twin-drive (EM) system. This reduces energy consumption, eliminates oil changes, and minimizes maintenance. Bsdpfx Ajyyck Sjb Dell High Speed and Productivity: Capable of up to 900 hits per minute for marking, and 370 hits per minute on 1-inch centers. AMNC-F/3i Control: User-friendly, touchscreen interface for fast, error-free operations. Environmental Efficiency: The machine requires a low 19 kVA power hookup, drawing less than 5 kW at maximum power. Quiet Operation: Uses brush-type tables to reduce noise and prevent scratching on the underside of sheets. Tooling Efficiency: Features a "Triplet Track" turret and power vacuum die system to reduce tool changes and prevent slug pulling.

Year of construction: 2003, condition: excellent (used), Amada GS 630 sheet metal hydraulic cutting machine for sale G Series Hydraulic Shear – Video at the bottom of this listing Specification: Model: 630 Bsdoimwcqjpfx Ab Djll Max Plate Thickness mild steel (mm): 6.35 Max Plate Thickness stainless steel (mm) 4 Max Cut Length (mm) 3050 Max Stroke / min 35 Motor Size (Kw) 5.5 Machine Weight (Kg) 6150 Back gauge speed (mm/s) 100 Back gauge Range (mm) 10-1000

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, pressing force: 220 t, working width: 4,100 mm, working range: 4,100 mm, Model: Used Amada HFE M2 220t 4metre x 220ton, 8 axis Press Brake For Sale Hydraulic Down Stroke Year 2012 Tonnage 220 tonnes Max. Bend Length 4280 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 195L Motor Power Weight 17450 Kg Dimensions Machine Length 5070 mm Bjdpfxev Tdbge Ab Doll Machine Depth 2075 mm Machine Height 3085 mm Distance Between Side Frames 3760mm Beam width 180 mm Table height 960 mm Open Height 470 mm Throat Depth 420 mm