Hydr. Press brake

AMADA HFE400-6L 6000 x 400 to L

Condition: new, functionality: fully functional, Year of construction: 2026, roller (bottom) diameter: 310 mm, roller (top) diameter: 320 mm, roller diameter: 310 mm, roller length: 1,550 mm, working width: 1,500 mm, sheet thickness steel (max.): 38 mm, overall weight: 12,500 kg, total length: 4,500 mm, total width: 2,300 mm, total height: 1,740 mm, power: 18.39 kW (25.00 HP), working length: 1,500 mm, Equipment: documentation/manual, emergency stop, FACCIN HAV 15342 variable three-roll bending machine Electronically controlled, hydraulic three-roll bending machine Technical data: Number of rollers: Three Geometry of the side rollers: variable Knsdpfx Aot Akt Rofwja Working width: 1550 mm Top roller diameter: 320 mm Side roller diameter: 310 mm Pressure force against the top roller: 160 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 18 kW (25 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 12,500 kg Length: 4,500 mm Width: 2,300 mm Height: 1,700 mm Guaranteed performance: for material with yield strength 260 N/mm² Rolling capacity (full working width) 38 mm Bending capacity (full working width) 20 mm from pipe diameter 1,600 mm Rolling capacity (full working width) 30 mm Bending capacity (full working width) 17 mm from pipe diameter 415 mm Standard equipment: Variable geometry with linear guides for roller movement Extra long folding bearing for increased frame stability Electronic parallelism system EPS Hardened rollers for high wear protection All rollers ground after heat treatment Siemens S7-HMI PLC control system PGS-CLASSIC control system with Siemens touch panel Hitech hydraulic and electrical package Simultaneous rotation and roller movement Safety ripcord with emergency stop and CE certification Central lubrication Water cooling for the hydraulics Cone bending device Prepared for retrofitting of supports and roller conveyors FACCIN Advantage Package AP

Condition: good (used), Magnetic table 455 x 170 mm digital display water tank Knedpfotu Il Tex Afwea Honing device Wet sanding device

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar Kjdpfx Afjtqqr Rjwsna oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Kodpfx Ajg Ix Hmsfwena

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Knodehcnhmopfx Afwja Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, DAVI_MCB 3060 WT 4-roll plate bending machine CNC _ 3000x65 MM - Year of make 2007 Capacity plate width 3100 mm Plate thickness 65 mm Prebend 55 mm TOP ROLL 600 MM LOWER ROLL 550 MM Configuration installed: • Surface hardening of the four rolls • Dual pre-pinch, with adjustable force upon the input of plate thickness Kedpsy D Npiofx Afwsna • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller DAVI GENIUS semiautomatic and fully automatic programmable. with digital readout of the 4rollers for use in manual operation, • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service Voltage electric 3phase Vac 380/50 power Kw 75 nr.1 top support hydraulic operated , shell ID max 5 mtrs - CNC programmable nr.1 side support hydraulic on the left nr.1 side support hydraulic on the right, finger pusher to swing the sheet plate forming cones rolling.

Condition: new, Year of construction: 2025, functionality: fully functional, stroke length: 310 mm, operating speed: 10 mm/s, reverse speed: 200 mm/s, throat depth: 410 mm, oil tank capacity: 220 l, travel distance X-axis: 750 mm, controller manufacturer: ESA, controller model: S 875W, working width: 4,100 mm, bending force (max.): 220 t, back gauge: 750 mm, distance between stands: 3,600 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Hybrid Bending Press MVD 4100 x 220 Tons HC-Series CNC ESA S 875W 21″ *dxf 3D ready Knedpfxsx N Rxcj Afwja 8 axes (Y1-Y2-X-R-Z1-Z2-X5_conical_A1) Automatic WILA crowning table Dsp Laser GIVI MISURE high-precision optical scales UNIMEC back gauge Upper tool clamp: Promecam Rolleri Type H = 150 mm Multi-cavity die, full length Press force: 220 tons Bending length: 4100 mm Distance between uprights: 3600 mm Throat depth: 410 mm Table – ram opening (“light”): 515 mm Working height: 965 mm Y-axis stroke: 310 mm Y-axis descent speed: 200 mm/s Y-axis working speed: 0–10 mm/s Y-axis return speed: 200 mm/s X-axis back gauge stroke: 750 mm Power: 18.5 kW Dimensions (L x W x H): 5600 x 2200 x 3040 mm Approximate weight: 13,700 kg

Condition: used, MAZAK QT 20 Model: OT-20-N-K Turret: 8 positions Motor: 18.5 kW Year: 1988 Weight: 11,700 lbs Chuck: diameter 250 renewed operational panel Kodpfxewulzvj Afwena

Condition: used, Year of construction: 1994, cutting diameter 520 mm saw band length 7239 mm cutting width 1,3 mm Control POSIMOD cutting range - square - 520 x 520 mm feed length 500 mm feed length: multiple 4500 mm min. cut-off length 6 mm Knsdpfxewm Rm Ij Afwja length of rest piece min/max 10 / 100 mm cutting speed 20 - 130 m/min dimensions of saw-band 7239 x 50 x 1,3 mm sawing motor 5,5 kW total power requirement 10,0 kW weight of the machine ca. 3,8 t dimensions of machine L x W x H 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant

Year of construction: 1993, condition: ready for operation (used), machine/vehicle number: Seriennummer: 9302394, CNC-Control HATASTAR 2000 The press capacity is 500 t or 5000 kN In addition to the machine tools are available Kodod Egc Ajpfx Afwjna Switch Cabinet left X1- + R-/ X2- + R-Axe on round guide Y1- + Y2-Axe hydraulic Upper tool clamping pneumatic sheet metal trace-device Second tow-hands Operation universal matrice 100x100x5'100 mm knife 280 x 5'100 mm Matrices-central plate, b = 111 mm