Used 5 X Combo for sale (91,793)

Year of construction: 2006, condition: ready for operation (used), functionality: fully functional, overall weight: 4,900 kg, grinding length: 630 mm, center height: 140 mm, grinding diameter: 275 mm, machine/vehicle number: 0116, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between December 2nd, 2026, and December 3rd, 2026! TECHNICAL DETAILS Maximum height: 140 mm Circumferential diameter: max. 275 mm Grinding length: max. 630 mm Grinding diameter: max. 275 mm Workpiece weight: max. 250 kg Workpiece weight during chucking operations including clamping device: max. 40 kg Spindle taper: MK 5 Tailstock center: MK 4 Drive motor: 1.1 kW Spindle travel: max. 6 mm Speed: 0.06–10 mm/min Quill stroke: max. 32 mm Tailstock center: MK 4 Guedo Ai Sixspfx Ad Rei Cylinder compensation: ±0.1 mm/diameter Division mark: 0.002 mm/diameter Table speed: 0.05–5 m/min Table travel: max. 810 mm Table dwell time at reversal points: 0–5 s Table adjustment per handwheel revolution in coarse mode: 20 mm Table adjustment per handwheel revolution in fine mode: 2 mm Automatic feed rate during longitudinal grinding: 0.001–0.06 mm/diameter Swivel range of the top slide: +11° 40′ / −5° If the swivel angle exceeds +11° 40′, the tailstock support must be removed. Quick traverse: 70 mm Feed: 100 mm Coarse adjustment: 355 mm Grinding wheel diameter: 500 mm Grinding wheel width: max. 100 mm Grinding wheel bore: 203.2 mm Drive power: 7.5 kW Grinding wheel peripheral speed: 35/50 m/s MACHINE DETAILS Grinding wheel diameter: approx. 480 mm Magnetic chuck diameter: approx. 250 mm Dimensions and weight Dimensions: 3,700 x 2,600 x 2,200 mm Weight: 4,900 kg Transport width: 2,500 mm EQUIPMENT Technical documentation Grinding wheel Magnetic chuck Various steady rests Additional accessories

Condition: used, Year of construction: 1996, machine/vehicle number: 1348, overall weight: 4,500 kg, filter area: 1 m², Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Guodpfxs Ai A Ere Ad Rei Material, contact parts: Hastelloy C-4 (2.4610) Material, other parts: Stainless steel 1.4539 (904L) Filter Filter area: 1.0 m² Filter width: 250 mm Filter length: 4,000 mm MACHINE DETAILS Drive Motor power, belt drive: 0.75 kW Voltage, belt drive: 400 V Vacuum system Number of vacuum pumps: 2 Motor power, vacuum pump: approx. 11 kW Liquid pumps Number of liquid pumps: 2 Motor power, liquid pump 1: 4.6 kW Motor power, liquid pump 2: 1.85 kW Dimensions and weight Footprint, filter: 6.7 x 1.7 m Overall height: 1.8 m Weight: 4,500 kg EQUIPMENT Gas-tight design Infinitely variable drive Cake discharge with knife Vacuum pumps, manufacturer: Siemens and NASH Vacuum pump motor in explosion-proof design Vacuum vessel Liquid pumps, manufacturer: Bungartz, made of Hastelloy C-4 Switch Control cabinet (condition as inspected)

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter over cross slide: 310 mm, spindle bore: 80 mm, center width: 1,500 mm, rotational speed (max.): 1,600 rpm, TECHNICAL DETAILS Turning diameter over bed: max. 500 mm Turning diameter over cross slide: max. 310 mm Turning diameter in gap: max. 720 mm Bed width: 405 mm Workpiece length between centers: max. 1,500 mm Turning length: max. 1,350 mm Effective gap length: 230 mm Workpiece weight: max. 500 kg Spindle nose: D8 Spindle bore: 80 mm Spindle taper: MK 7 Metric spindle taper diameter: 113 mm Spindle taper ratio: 1:20 Number of speed stages: 12 Spindle speed: 36–1,600 rpm MACHINE DETAILS Main motor power: 7.5 kW Gusdpfx Ao Airvaed Rei EQUIPMENT SINO digital position display Heavy-duty, vibration-damping machine bed with reinforcing ribs Wide, induction-hardened, and ground guideways Electrically interlocked chuck guard Adjustable micrometer stop Overload clutch Hardened and ground gears with oil lubrication Precision-bearing main spindle Ergonomic controls Single-lever control for longitudinal and transverse feed Rapid traverse for X and Z axes Gearbox for speed and feed selection Finely graded feed rates and thread pitches Main spindle gearbox with electromagnetic clutch Electrical components from well-known European manufacturers, including Telemecanique Multifix tool holder Turning chuck Faceplate Steady rests

Condition: used, Year of construction: 2006, functionality: limited functionality, travel distance X-axis: 700 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 850 mm, controller manufacturer: Siemens, controller model: 840D, workpiece length (max.): 660 mm, workpiece height (max.): 660 mm, workpiece diameter (max.): 725 mm, workpiece weight (max.): 600 kg, overall weight: 18,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 25 W, spindle nose: ISO50, number of slots in tool magazine: 148, Equipment: chip conveyor, documentation/manual, X2 MCM Clock 5-Axis Small MP10 inclusive FMS 24PP 5-Axis Milling Machine – Technical Specifications 1. Machine Travels Parameter Specification X-Axis Travel 700 mm Y-Axis Travel 710 mm Z-Axis Travel 850 mm A-Axis Travel -45° to +135° B-Axis Rotation 360° Machine / Table Reference Distance 153.835 mm (text incomplete in original) Pivot Point / Gauge Line Distance Sub-table 2. Table Parameter Specification Working Area 660 × 660 mm (Ø 725 mm) Working Area per Pallet 500 × 500 mm Pallet Pitch 50 mm Number of Pallets 8 Maximum Load Capacity 600 kg 3. Axis Feed Rates Parameter Specification X- and Z-Axis Feed Rate 32,000 mm/min Y-Axis Feed Rate 28,570 mm/min A-Axis Rotation Speed 3 rpm C-Axis Rotation Speed 9 rpm 4. Spindle Parameter Specification Number of Spindles 1 Spindle Speed 8,000 rpm Spindle Power 25 kW Spindle Torque Not specified Spindle Taper ISO 50 5. Tooling Parameter Specification Number of Tool Magazines per Spindle 1 Tool Magazine Capacity 148 tools Maximum Tool Weight 25 kg Maximum Tool Diameter 300 mm Maximum Tool Length 500 mm Tool Change Time 2.5 seconds 6. Control System Parameter Specification Control System Manufacturer SIEMENS Control System Type 840D Post Processor Not specified 7. Flexible Manufacturing System FMS 24pp Parameter Specification N° of positions 24 N° Pallets 24 Gedpfx Ade Ai Nvis Roui N° Layers 2 8. General Specifications Parameter Specification Machine Weight 18,000 kg

Condition: used, Year of construction: 2004, Matsuura MAM72-3VS 5 Axis Multi pallet Machining Centre (2004), Traverses X Y Z: 680 x 394 x 625mm, B axis -110/+ 65 degrees, C Axis 0.001 degrees, Pallet Diameter 130mm, Maximum Workpiece Diameter 300mm, Maximum Workpiece Height 300mm, Number of Pallets 40, Spindle Taper BT40, 240 Station ATC, Spindle Speed 12000rpm, Fanuc G-Tech 16I Control, Through Spindle Coolant and Swarf Conveyor. S/No. 15738. Country of Origin: Japan Gedpfx Adj Ah Hcws Rjui Location: This lot is located in Leicester, UK. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Guedjz Hifdspfx Ad Rsi Buyer to arrange and fund the shipment. Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, mileage: 238,000 km, power: 397 kW (539.77 HP), first registration: 03/2020, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, Manufacturer Volvo Model FH540 8x4?4 Hiab X-Hipro 302 EP-5 / Hooklift Year 2020 Condition Very good Serial Number YV2RT60G2KA846633 Ref. nr. 258224 Gedpfx Aj Akitvsd Rjui Reg. date: 13-03-2020 Last seen: 14-04-2026 Engine: D13K Hk: 540 Km: 238000 Gearbox: I-Shift Eurotype: 6 Diesel tank: 1 Tank liter: 405 L Mirror camera: ? Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: SLEEPER CAB FH Navigation: ? Coffee machine: ? Leather seats: ? Equipment package: Drive++ Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: VEB + Tire Size: 385/65R22,5 - 315/70R22,5 - 385/65R22,5 Cover% left 70% 50% 50% 40% Front suspension: Air Suspension rear: Air Wheelbase: 4300 mm Toolbox: ? Hydraulic system: ? Total weight: 32000 Kg Net weight: 18875 Kg Load capacity 13125 Kg Manufacturer: Hiab Hook hoist: ? (21 h) Crane Make: Hiab X-Hipro 302 EP-5 Year: 2019 Tonsmeter: 30 Procrastination: 5 Remote control: ?

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Godpfx Aewiatijd Rsui Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Technical details turning diameter 570 mm turning length 1000 mm control MANUALplus 620 swing diameter over face slide 340 mm Gsdpfxj Akc Aro Ad Rjui spindle bore 93 mm spindle turning speed range 1 - 3000 U/min transmission ratio 2 rapid power traverse in X-and Z direction 7 / 10 m/min max. workpiece weight -without tailstock 500 kg max. workpiece weight between centres 1000 kg workpiece weight in steadies max. 1250 kg main drive motor (100/60% ED) 20 / 25 kW Dimensions (LxWxH) 2,94 x 2,20 x 1,96 m max. torque on the spindle ca. 1400 Nm weight of the machine ca. 3,4 t Additional information Very well-maintained cycle-controlled lathe with driven tools. Current operating hours: 10868 * HEIDENHAIN MANUALplus 620 control system - Control system expansion for ICP and DIN programs, incl. thread repair * Automatic 8-station SAUTER turret with driven stations, VDI shank D=30 mm, mounted in front of the turning center (limits achievable turning diameter and tailstock operations; reduces turning length) * 2-speed planetary gearbox, automatic shifting * Main spindle holding brake, incl. software upgrade for bolt hole circle and milling cycle options - C-axis-style functionality for pocket milling, with drilling, milling, and engraving cycles and free ICP input * Reinforced coolant pump * RÖHM 3-jaw chuck, 315 mm, with one set of hard jaws * Steady rest * Approx. 20 fixed tool holders * 2 driven tool holders

Condition: excellent (used), Technical specifications: Maximum cutting width: 2050 mm Maximum cutting capacity for steel: 0.3 - 4.0 mm Adjustable parallel stop: 1050 mm CNC control: OPERATOR OPE1 Retraction function Cutting gap adjustment Working height: 1030 mm Motor power: 5 kW Guodpfj Aki Rhjx Ad Rji Dimensions (length x width x height): approx. 2500 x 1900 x 1750 mm Weight: approx. 2.6 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), functionality: fully functional, Cutting length: 2020 mm Guedez Sqmzopfx Ad Rji Max. sheet thickness at 400 N/mm²: 5 mm Max. sheet thickness at 750 N/mm²: 3 mm Cutting angle approx.: 1.5° Strokes per minute: 40 strokes/min Back gauge approx.: 750 mm Stand throat depth: 200 mm

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 5 mm distance between columns 3020 mm Gujdpfoyk Dicex Ad Roi Control Simatec OP7 stroke 450 mm back stop - adjustable 2000 mm work height max. 900 mm total power requirement 22 kW weight of the machine ca. 9000 kg dimensions of the machine ca. 4200 x 1600/2900 x 2000 mm Features: - Motorized backgauge, 2000 mm - Hydraulic upper jaw adjustment - Motorized lower jaw adjustment - Hydraulic tool clamping - Side guards - Foot switch - Operating instructions

Condition: excellent (used), Year of construction: 1995, turning length: 20,500 mm, travel distance X-axis: 1,800 mm, travel distance Z-axis: 20,500 mm, spindle motor power: 131,000 W, rotational speed (max.): 445 rpm, total height: 3,200 mm, total length: 29,500 mm, total width: 4,000 mm, workpiece weight (max.): 35,000 kg, overall weight: 132,000 kg, Equipment: documentation/manual, 4 bed way construcion width 1800 mm 4 chuck 1200 mm rotation 445 Rpm Baruffaldi TOEF 400 Turret  Axial    station Sk50 with 1580 Rpm and 18.3 kW Radial station Sk50 with 1580 Rpm and 18.3 kW Gjdpfxe Aifrdo Ad Reui   C-Axis 360.000 Positions Y-Axis + 5 mm to - 23 mm Measuring system: X Axis optical LS 107 Z Axis optical LB 326 Y Axis optical MT60K C Axis encode ROD 1850 Thread cutting ROD 1850   SIEMENS SINUMRIK  820T (4 Axis X, Y, Z and C) Linear interpolation Circular interpolation   Boring bar support for 150 x 1500 mm Steady rest C-Type 150 - 500 Load   8000 Kg Steady rest C-Type 400 - 850 Load   8000 Kg Steady rest RING    150 - 650 Load 10000 Kg DBC Turning Length: 20500mm Swing over bed Ø: 1800mm Swing over cross slide Ø:1600mm Spindle power: 131kW Bed width: 1800mm Tailstock spindle Ø: 300Ø Stroke pinole: 150mm Speeds / ranges: 1.8 - 445Rpm Feed rate X-Axis: 0 - 4000mm/min. Feed rate Z-Axis: 0 - 8000mm/min. Workpiece load: 35000 Length: 29500mm Width: 4000mm Height: 3200mm Weight: 132000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, operating hours: 170 h, Size 72 x 102 cm, Presscenter, Wallscreen, program-controlled washup system for rollers, Preset Plus feeder, Preset Plus delivery, Autoplate, blanket and impression cylinders, chambered ducter blade coating unit, non-stop feeder, extended delivery X3, Heidelberg IR dryer, UV dryer at the end of the press, anti-static system in feeder and delivery, Heidelberg Cleanstar, Weko AP 500 powder spray system, Airstar Pro, machine is elevated 500 mm. Machine no.: 551581, impressions: 165 million. Gusdpfx As Agnifed Rei

Condition: excellent (used), Year of construction: 2020, operating hours: 96 h, Size 72 x 102 cm, Presscenter XL 3, Axis control, Wallscreen, Autoplate Pro, Preset Plus feeder, Preset Plus delivery, Program-controlled washup for ink, blanket, and impression cylinders, Non-stop feeder, Intercom, Double sheet detector, Extended delivery X2, IR dryer, water-cooled, Heidelberg Cleanstar, Weko AP 500 powder spray, Anti-static system in feeder and delivery, Airstar Pro, Chambered doctor blade coating unit, Machine is elevated 500 mm. Gsdps Agnh Nsfx Ad Rsui Machine no.: 552120, Impressions: 98 million.

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching die, punching die, round die -Manufacturer: Mubea, punching die round die Ø 75 mm Gusdpfx Adeiqhh Ds Rsi -Type: Mubea 75 1 5 -Total dimensions: Ø 150 x 40 mm -Weight: 3,9 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control Godpfjztykgox Ad Rjui - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: good (used), Year of construction: 2002, GALLUS T 180 S by Graficon 5-Color Flatbed Screen Printing Machine with Hot Foil and Die-Cutting Dear Sir or Madam, We are pleased to offer the following Gallus T 180 S by Graficon, a highly versatile narrow-web label printing and converting machine equipped with five flatbed screen-printing units, hot-foil capability, lamination, and flatbed die-cutting. The machine is currently installed at the owner’s production facility and is offered for sale due to the planned acquisition of a new machine. Additional photographs and production videos are available upon request. _____ Machine Summary Description Details Manufacturer Gallus / Graficon Model T 180 S Year of manufacture Approx. 1992 Complete overhaul 2002 by Graficon Printing process Flatbed screen printing Number of printing units 5 Maximum web width 200 mm Maximum printing width 180 mm Current condition Installed in factory, described as being in good condition Availability Subject to final confirmation Selling price EUR 49,000 Delivery terms Loaded on truck / ex current location, subject to confirmation FGT condition rating ★★★★★☆☆☆ 7/10 – _____ Why This Machine Is Interesting The Gallus T 180 S is a specialized narrow-web production system designed for high-value labels and technical products requiring strong ink coverage, high opacity, and tactile effects. The five flatbed screen-printing units allow the production of applications such as: • High-opacity white printing • Pharmaceutical and cosmetic labels • Industrial and technical labels • Security labels • Special-effect and tactile coatings • Metallic and decorative labels • Premium wine and beverage labels Gedpezmhkusfx Ad Roui • Heat-resistant and durable labels The additional hot-foil, embossing, laminating, and die-cutting equipment makes this machine suitable for the complete production of finished labels in one production line. A major advantage is the extensive overhaul carried out by Graficon in 2002, during which the machine was reportedly rebuilt to an “as-new” condition. The printing units were also upgraded with servo drives, improving register control and production stability.

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade Gsdpfxjvzni Rj Ad Roui -Saw blade: blank Ø 460 x 5 mm -Inside: Ø: 50 mm -Bolt circle: Ø 100 x 18 mm -Number of teeth: 54, see photo -Weight: 5 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Used Jorns double-bending machine Very good condition Type: TwinMatic 150 SF 1150 CNC 6000 6.4 Year of manufacture: 2008–12 (lightly used) Capacity: 6400 x 1.5 mm (steel) 2D graphical CNC control Double-bending capability Guodpfxe Agt Tne Ad Rji Front-mounted rotary shear

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW Godpowwlvlofx Ad Reui weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: refurbished (used), PRICE ON REQUEST! - 5 units, used and inspected completely overhauled, all wear parts replaced - completely measured - Gear play: Axis 4 - 0.02 WM Axis 5 - 0.02 WM Axis 6 - 0.02 WM Gedsg A Iv Eepfx Ad Rjui - Central hand newly adjusted - Endurance test for 8 hours at 100% load - Delivery in a special box (insured shipping) - Central hand available for exchange (without exchange available on request) - Gearbox overhaul of axes 1-6 - 12 months warranty 18 months possible for an additional fee MORE THAN 100 central hands immediately available in stock, various models. Just inquire! We also offer an express overhaul of your KUKA central hand – 48-72 hours from delivery. In addition, we also offer the repair of ABB wrists.

Condition: used, Industrial metal detector for detecting metallic foreign objects in packaged food products within automated production and packaging lines. Manufacturer: Sartorius Mechatronics C&D GmbH & Co. KG Type: MDP-C 35 x 12.5 Machine type: Metal detector / metal detection system Year of manufacture: 2009 Gujdpfxo Akd Ews Ad Rji Voltage supply for detector unit: 85–264 V AC Frequency range for detector unit: 47–440 Hz Power consumption for detector unit: 80 VA Control unit: Sartorius with LCD display and function keys Operating functions: Learn function, function keys F1–F8, confirmation and cancel key Detection system: Metal detection of products on a conveyor belt Conveyor system: Integrated conveyor belt Detector housing: Closed, pass-through design Housing material: Stainless steel Additional electrical module: Sartorius BMG(5/2) 150 x 30 / MDP-C Voltage supply for additional module: 230 V AC Frequency of additional module: 50 Hz Power consumption of additional module: 600 VA Controls: Main switch and additional control buttons

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, total length: 8,635 mm, load capacity: 5,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 5,000 kg – Lifting height: 6 m – Year of manufacture: 2006 – Hoist type: wire rope hoist – FEM/ISO hoist: 2m Gsdpfozi Thwex Ad Reui Dimensions – Span: 8,635 mm center-to-center – Overall length: 8,785 mm – Installation height: 900 mm – Width of wheel set including bumpers: 2,400 mm – Width of wheel set excluding bumpers: 2,200 mm – Wheelbase: 1,900 mm – Suitable for crane rail: 50×30 mm – Dead weight: approx. 2,075 kg Speeds – Hoisting: 5/0.8 m/min (2 speeds) – Trolley travel: 20/5 m/min (2 speeds) – Crane travel: 40/10 m/min (2 speeds) Features – Control: wired control panel; radio control optional – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but in working order – Dismantled: yes, available immediately

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Guedpfx Adovvi N Io Rji