Used Amplifier for sale (356)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Pjdjzlx E Tjpfx Alcera Conveyors

Condition: used, LDS V455 Vibration Testing System / Shaking Testing System Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Machine Type: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier For sale is a used vibration and shaking testing system from Ling Dynamic Systems Ltd. (LDS). The system consists of an electro-dynamic LDS V455 shaker, a PA 1000 power amplifier, and a separate fan/cooling unit. The system is suitable for generating defined mechanical vibrations, as well as for vibration, stress, and component testing. Possible applications include use in laboratories, development, quality assurance, and industrial testing. Technical data: Manufacturer: Ling Dynamic Systems Ltd. (LDS) Shaker: V455 Prsdpfx Alezulngocoa System: Electro-dynamic Vibration / Shaking Testing System Power Amplifier: LDS PA 1000 Power Amplifier Amplifier Output Current Indicator: 0–20 A RMS Year of Manufacture: Not specified Fan Motor: Manufacturer: ASEA / Electrolux Elmotor A/S Type: M056SX2 Voltage: 220–240 V Current: 2.0 A Speed: 2,880 RPM Protection Class: IP54 Insulation Class: B Capacitor: 1.5 µF / 360 V Country of Manufacture: Denmark Fan: Manufacturer: Air Control Installations (Chard) Ltd. Type: 2M53 Voltage: 240 V Phase: 1 Frequency: 50 Hz Current Draw: 0.45 A Speed: 2,880 RPM Capacitor: 1.5 µF MFD: 440 VAC/WKG: 25 Made in U.K. Dimensions: The overall dimensions of the system cannot be clearly determined from the available images and nameplates. Equipment: LDS V455 electro-dynamic shaker LDS PA 1000 power amplifier Separate fan/cooling unit Shaker mounting / base frame Hoses and connection cables Transport case for the power amplifier Accessories as shown in the images Shipping data: Total weight: 240 kg Condition: Used Signs of wear and tear due to age and use are present. Dirt, paint chips, and traces of corrosion are visible. Optical condition as shown in the images. Scope of supply: 1 × LDS V455 electro-dynamic shaker 1 × LDS PA 1000 power amplifier 1 × Fan/cooling unit Shaker mounting / base frame Connection cables and hoses as shown in the images Transport case for the power amplifier Accessories as shown in the images Availability: by arrangement. Scope of supply as shown in the images. Subject to changes, errors and prior sale.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, power: 37.5 kW (50.99 HP), input voltage: 380 V, type of input current: three-phase, pressing force: 500 t, stroke length: 400 mm, operating speed: 7 mm/s, reverse speed: 60 mm/s, table width: 530 mm, table length: 4,100 mm, throat depth: 500 mm, distance table to ram: 890 mm, overall weight: 42,000 kg, - Heavy-duty press brake > 300-ton capacity per meter > ideal for high-strength alloy steels Prjdpfxezw I N Sj Alcea - 6 axes: Y1 / Y2 / X / R / Z / V - The upper ram has an extension (horn) of 500 mm > total bending length of 4,100 mm - Hydraulic upper tool clamping - Capable of conical bending! - Akas laser safety system - CNC crowning - Equipped with a V-Matic variable bending die (CNC control); from V40 to a maximum of V160 - The machine is floor-mounted; no foundation is required - Included: a large set of heavy-duty tooling for highly alloyed steels! - The tools are stored in a mobile cart that can be attached to the machine. The operator can then install and remove the upper and lower punches and dies manually. Brand: HACO Model: ERM 36500 1 unit in total Bending capacity: 500 tons x 4100 mm (bending length) Electrical supply: 380V Robosoft numerical control (Macon, 4 axes, proportional valve amplifier, integrated by Muritech) Siemens S7 PLC Invertek Optidrive CP frequency inverters Baumüller servo amplifiers Motorized multi-axis back gauge with cable carrier chain Safety: Type 4 DSP Laser non-material light curtain (transmitter/receiver), CE certified Dell control screen Supplied with a large set of tooling: V-dies of various lengths, radii, and openings Work table with roller conveyors for sheet metal handling Machine is stationary, not tested under power - on-site inspection recommended before bidding Reinforced version: ram designed to support a load of 300 tons per meter Special CNC-controlled variable V-die (V40 to V160) Hydraulic clamping at the top CNC crowning Press equipped with a 500 mm horn User-friendly control via 2D touchscreen, Thurei 02E version 2025 software 2 custom-made tool carts for storing bending tools, designed for tool changes Dismantling/removal: must be carried out by a specialized company No suitable lifting equipment available on site Logistical visit essential before removal Serial number: 81599 Sale due to bankruptcy

Condition: good (used), RMS RMS vibration exciter with power amplifier and cooling fan. Vibration exciter SW 1511/2 Predpfx Ajzdry Uslcja Power amplifier TGD 3000-000 00 Input: 3x400V-50Hz, 14.5 kVA Cooling fan SWG 108 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We would be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer an LDS shaker with power amplifier and control unit. Shaker technical data: Shaker type V 875 Peak force SINUS 35.6 kN Peak force NOISE 35.6 kN (rms) Peak force SHOCK 106.7 kN Max. acceleration SINUS 1078 m/s² Max. acceleration RANDOM 735.5 m/s² (rms) Max. velocity 1.8 m/s Frequency range excitation direction 0 to 3000 Hz Excitation types: horizontal, vertical, any angle Excitation types: Tests with sinusoidal excitation Tests with noise-shaped excitation Tests with sine and noise-shaped excitation Tests with shock-shaped excitation (SHOCK): Half-sine shock Sawtooth shock Trapezoidal shock Rectangular shock Simulation or reproduction of a real load profile (Long Time History LTH). A real dynamic time history is used for the test, which was obtained in the test environment. (FFT): Shaker Control Signal Analysis (RANDOM): Random (ROR): Random-on-Random (RSTD): Resonance Search, Track and Dwell (SINEOSC): Sine Oscillator (SOR): Sine-on-Random (SROR): Sine-and-Random-on-Random (SRS): Shock Response Spectrum Synthesis (LTH): Long Time History Data types in signal analysis Possible data types for displaying the TRANSFER FUNCTION [transmibility(f)] Mag dB Mag log Mag Real dB Real Imaginary dB Imaginary Phase UnwrapPhase Real+Imaginery Mag+Phase dB Mag+Phase log Mag+Phase Pjdpfx Aljzd Umdjcera V875 Vibrator 440 mm SPA40K 35.6 kN Dimensions: Approx. 54x90x191cm (amplifier), 115x155x95cm (shaker) Weight: Approx. 650kg (amplifier), 3 tons (shaker) Type: SPA56/40K v3 V875 TC Condition: used Scope of supply: (See image) (Changes and errors in the technical data, specifications are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Servo drive, servo card, input processor, control card, input card, control unit, converter, controller, servo module, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier -Manufacturer: Stöber, transistor amplifiers -Type: TAS 1016 Pedpfxszk D Tyo Alcora -Input: 230 V 50/60 Hz -Output: 0...160V 10.3A -Dimensions: 270/220/55 mm -Weight: 3.4 kg

Condition: excellent (used), LDS Type: V895-440 HBT900C with SPA50K amplifier Technical data: Actuator dimensions: 440 mm Sine force vector: 55.6 kN (peak) Random force vector: 55.6 kN (RMS) Half-sine force vector: 166.8 kN (peak) Frequency range: 0 to 2100 Hz Sine acceleration max.: 981 m/s² Random acceleration max.: 490 m/s² Velocity max.: 1.6 m/s Displacement: ± 63.5 mm Vibration exciter mass: 55 kg Max. load: 700 kg Psdpezg Tybjfx Alcera Amplifier dimensions: W x H x D mm: 537 mm x 1905 mm x 895 mm Weight: 622 kg Slip table: Working surface: 900 mm x 900 mm Plate thickness: 50 mm Plate weight: 80.4 kg Max. load: 7250 kg Usable frequency range: 5-2000 Hz Condition: used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: L x H x W approx. 2700 x 1500 x 1800 mm Scope of supply: (See pictures) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, This listing is for a Siemens Immulite 1000 Automated Immunoassay System The unit is in full working condition and ready for immediate use Podpfx Aoxzhmfjlcjra The Siemens Immulite 1000 is a compact benchtop automated immunoassay analyser designed for routine and specialised testing. It provides random-access operation, enzyme-amplified chemiluminescence technology and throughput of up to 120 tests per hour. It supports serum and plasma samples and offers a broad assay menu.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Psdpowhvrrefx Alcsra Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: excellent (used), RMS Vibrations Testing System SW 8100/1 Manufacturer: RMS Type: SW 8100/1 Machine Type: Electro-dynamic Vibration and Shock Testing System Design: With sliding table, head expander and amplifier For sale is a used electro-dynamic vibration and shock testing system from the manufacturer RMS. The system is suitable for vibration, shock and fatigue testing in the areas of development, quality assurance, research, material testing and product testing. Technical Data Sinusoidal Force: 24 kN Random Force: 20 kN Shock Force: 28 kN Displacement: 1.5" Armature Stroke: ±22 mm Armature Diameter: 284 mm Thread: M10 Max. Acceleration: 130 g Acceleration at 60 kg payload: 30 g Frequency Range: 5 - 3000 Hz Weight Compensation: up to 500 kg Total Connected Power: approx. 35 kVA Required Cooling Water: optimally 15 °C - 20 °C Water Flow Rate: approx. 25 l/min Water Pressure: approx. 3 bar Compressed Air: 6 bar for weight compensation and center suspension Total Weight: approx. 3,500 kg Equipment Vibration Exciter SW 8100/1 Sliding Table Digital Amplifier Control Cabinet with Water Cooling Connection Box / Fuse Box Head Expander made of Magnesium Angle for Sample Mounting / Horizontal Shock Testing Water-Cooled System Head Expander / Test Table Psdpfx Aozd T Rhjlcora Head Expander Weight: approx. 50 kg Mounting Surface Head Expander: 800 x 700 mm Grid: 50 x 50 mm Thread: M8 Angle for Sample Mounting: approx. 25 kg Mounting Surface Angle: 230 x 230 mm Thread: M8 Suitable for use in high-performance horizontal shocks Modernization / Expansion 2021 The system was expanded in 2021 to achieve higher performance levels. The water cooling system was expanded with an additional plate heat exchanger for better heat dissipation to the cooling water. The main transformer for the digital amplifier was replaced. The power was increased from 15 kW to 24 kW. The voltage was increased from 92 V to 120 V. The capacitor bank was expanded to achieve better shock performance. The weight compensation was renewed. Scope of Delivery 1x Connection Box / Fuse Box 2x Control Cabinet, Water Cooling and Amplifier, approx. 250 kg each 1x Shaker / Vibration Exciter, approx. 2,200 kg 1x Sliding Table, approx. 450 kg 1x Head Expander, approx. 50 kg 1x Angle for Test Specimen Mounting / Horizontal Shocks, approx. 25 kg Condition Used Amplifier Serviced New Main Transformer New Capacitors Capacitor Bank Enlarged Water Cooling Optimized with Additional Plate Heat Exchanger Weight Compensation Renewed Optical Condition according to Pictures Sale from our location. Scope of delivery as shown in the pictures. Subject to changes and errors in the technical data as well as prior sale.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Podpfx Alowd N S Dscora -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: excellent (used), Bosch DM 4K 7101-D, servo module Amplifier module 1070079646-208 Predpfx Ask Szy Uslcsa Item condition: Used, in perfect condition Shelf(2)B-7_EK(BOR) Financing through our bank is also possible. komplett-konzept.leasingo.de More modules- new and used - you can find in our store! International shipping costs on request!

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us! Pedpfx Alozi Sv Hocora

Condition: good (used), Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC -Type: A06B-6152-H045H580 -Dimensions: 150/380/H290 mm Prjdpfx Aswrxzwelcsa -Weight: 8.2 kg

Condition: ready for operation (used), Fanuc A06B-6078-H206 #H500 Spindle Amplifier Module, Version: C, Serial Number: EA8708221, used, in good condition, 100% functional, scope of supply as shown in the photos. Pjdpozuiggefx Alcera

Condition: excellent (used), Servo drive, control unit, converter, controller, servo module, axis amplifier, spindle amplifier module, servo amplifier, drive amplifier -Manufacturer: Beckhoff, Digital Compact Servo Amplifier 2-Channel -Type: AX5203Technical data: see photos, nameplate Pedpsxvpc Djfx Alcsra -Quantity: 1 servo amplifier available -Dimensions: 250/90/H320 mm -Weight: 5.4 kg

Condition: excellent (used), Fanuc AC Servo Amplifier C Series Type A 06B-6066-H 233 Podonnx Hnjpfx Alcsra No.F2X 00227-A22 Weight 6 kg

Condition: good (used), Servo amplifier module, servo amplifier module, CNC control system, plug-in card, Pedowrx Hmspfx Alcjra -Manufacturer: FANUC -Type: A06B-6127-H209 -Dimensions: 90/380/H310 mm -Weight: 6.2 kg

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier Module Version: B, SN: E4Y0020, used, minor signs of wear, 100% functional, delivery scope as shown in photos. Psdpfx Aex Era Tslcsra

Condition: ready for operation (used), Fanuc A06B-6088-H322 # H500 Spindle Amplifier SN:EA6X01300, used, normal signs of wear, 100% functional, delivery as per photos. Prjdpfx Aox Erbdslcja

Condition: good (used), Fanuc AC Servo Amplifier (28830 II) C Series Type A06B-6066-H211 A2 No.E5 80009 Podpfxonnx Hcs Alcera

Condition: used, Year of construction: 2016, functionality: fully functional, Beckhoff Automation Package – C5102, CP2712, AX5203, CX5020, EtherCAT I/O & TwinSAFE Description For sale is a high-quality Beckhoff automation package from an industrial production facility (year of manufacture 2016). All components come from the same system and were operated together until professionally dismantled. Pedjzrgw Ropfx Alcora This package is ideal as a spare parts stock, for expanding existing Beckhoff systems, or for rebuilding an EtherCAT controller. Scope of delivery (see numbering in the photos): No. 1 – Beckhoff C5102 Industrial PC Intel Core i7-3610QE 8 GB DDR3 RAM 1 TB SATA hard drive Windows 7 Embedded Year of manufacture 2016 No. 2 – Beckhoff CP2712-1002 Panel PC / Touch Panel 12.1" touchscreen Intel Celeron 1.46 GHz 4 GB RAM Windows 7 Embedded Year of manufacture 2016 No. 3 – Beckhoff AX5203-0000-0200 2-axis servo amplifier EtherCAT 2-axis version Year of manufacture 2016 No. 4 – Beckhoff CX5020 Embedded PC with EtherCAT I/O and TwinSAFE station Beckhoff CX5020 Embedded PC Beckhoff EK1122 EtherCAT Junction Beckhoff EL6900 TwinSAFE Logic Several TwinSAFE modules (including EL1904) Several digital Beckhoff EtherCAT input and output modules Completely assembled EtherCAT I/O station with a total of 24 Beckhoff modules The complete package is preferably sold as a set. Total price: €6,490 (negotiable) Individual components can also be sold separately after consultation. Recommended prices for individual sale: No. 1 – Beckhoff C5102 Industrial PC: €1,990 (negotiable) No. 2 – Beckhoff CP2712 Panel PC: €1,490 (negotiable) No. 3 – Beckhoff AX5203 Servo Amplifier: €1,490 (negotiable) No. 4 – Beckhoff CX5020 EtherCAT/TwinSAFE Station: €2,790 (negotiable)

Condition: good (used), Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm Pedpfxsdrpwgo Alcora -Weight: 12.2 kg

Condition: excellent (used), Servo drive, control unit, converter, controller, servo module, axis amplifier, spindle amplifier module, servo amplifier, drive amplifier -Manufacturer: Beckhoff, Digital Compact Servo Amplifier, 1-channel Prjdpfx Ajxpfddolcea -Type: AX5106Technical data: see photos, nameplate -Quantity: 2 servo amplifiers available -Price: per piece -Dimensions: 250/90/H320 mm -Weight: 5.2 kg/pc.

Condition: new, Promess KA-EMF80 Servo Press 80 kN Manufacturer: Promess Type: KA-EMF80 Type: Servo Press KN: 80 Condition: New Calibrated: Yes Predorgn Nnopfx Alcsa Strain Gauge Amplifier: BA 624.u2 Financing through our bank is also available. komplett-konzept.leasingo.de Find more new and used servo presses in our shop! International shipping costs on request!