Used Angle Welding for sale (11,008)

Condition: like new (used), Description of system area This is a pure component delivery Robot Credpfoudb E Ejx Ac Nsb KR 8 R 1620 arc (HW) The KR 8 R1620 arc HW industrial robot stands out in its class thanks to its high flexibility and long reach with optimum payload capacity. Furthermore, the robot was specially designed and developed for the welding process. - Nominal payload: 8 kg - Maximum reach: 1621 mm - Number of axes: 6 - Position repeatability (ISO 9283): ± 0.04 mm - Installation position: any angle, floor, ceiling, wall - Protection class (IEC 60529): IP54 - Degree of protection central hand (IEC 60529): IP54 - Hollow shaft The robot mechanics are supplied in the color R0000 KUKA Orange. The color of the base frame differs depending on the robot model (exception: KR 3 AGILUS and KR AGILUS-2, delivered with grey base frame). Linear unit KL 250-3 1CA (carrier length = 8m/ stroke = 7.1m) -further data on request-

Condition: excellent (used), Year of construction: 2021, volume capacity 3000 m3/h feed volume 99.9 % length 3.000 Absaugschlauch mm compressed air 5.0 - 6.0 bar motor 230 Volt motor 1.5 KW weight 135 kg range L-W-H 655 x 655 x 1460 mm very rarely used according to the previous owner current new price approx. 4.500 euros special price on request Description : - KEMPER Filter-Master XL with 1x suction arm - IFA-tested - W3 approval = suitable for use with . welding of high-alloy metals - Cleaning takes place via compressed air - easy to move Technical data - Fan capacity: 3,000 m³/h - Extraction capacity (max.): 1,000 m³/h Credpjy Erxcjfx Ac Neb - Motor power: 1.5 kW - Supply voltage: 3 x 400 V / 50 Hz - Separation efficiency: > 99.9 % - Number of filter cartridges: 1 - Compressed air supply: 5 - 6 bar - Noise level: 69 dB (A) - Weight (without extraction arm): 135 kg - Dimensions (W x D x H): 655 x 655 x 1,460 mm Note : - Device is only used for extracting dry dust / smoke - Read the operating instructions before using the appliance for the first time. Read instructions

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Attractive and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR certification (EXII, EXIII, FL, AT), tipping functionality with 24V connection up to a 20° tipping angle, unladen weight: 5,300 kg, gross permissible weight: 39,000 kg, tyres: 385/65-R22.5 (tread left: 4/11/12 mm; tread right: 9/11/9 mm), Dutch registration = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle make: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: LM rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 25%; tyre tread right: 55% Rear axle 2: LM rims; lift axle; max. axle load: 9,000 kg; tyre tread left: 70%; tyre tread right: 70% Rear axle 3: LM rims; max. axle load: 9,000 kg; tyre tread left: 75%; tyre tread right: 55% Weights Unladen weight: 5,300 kg Payload: 33,700 kg gross vehicle weight (GVW): 39,000 kg Functionality Body make: Van Hool 3B2013 Condition Technical condition: very good Optical condition: very good Identification Registration number: OH-91-FS Crsdpfx Acey H Hdpj Nob Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 04/2003, total length: 9,060 mm, total width: 2,500 mm, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,450 mm, Year of construction: 2003, Equipment: ABS, = Additional Options and Equipment = - ADR - EBS - Lift axle - Alloy wheels - Air suspension - Disc brakes = Remarks = Attractive and fully functional Van Hool 20FT tipper chassis (year of manufacture 2003) with ABS/EBS, SAF axles with disc brakes (Intradisc), 2 lift axles, ADR approval (EXII, EXIII, FL, AT), tipping angle up to 20 degrees (24V), unladen weight: 5,300 kg, permitted gross weight: 39,000 kg, tyres: 385/65-R22.5 (tread left: 9/10/7 mm; tread right: 11/10/8 mm), Dutch registration. = Further Information = Axle configuration Tyre size: 385/65 R22.5 Axle brand: SAF Intradisc Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 55%; Tyre tread right: 70% Rear axle 2: Alloy wheels; Lift axle; Max. axle load: 9,000 kg; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tyre tread left: 45%; Tyre tread right: 50% Weights Unladen weight: 5,300 kg Payload: 33,700 kg Gross weight: 39,000 kg Functionality Body manufacturer: Van Hool 3B2013 Crodpfx Acey H Hb Uo Nob Condition Technical condition: very good Visual condition: very good Identification Registration number: OH-89-FS Further information Please contact Arne Honingh for more information.

Condition: good (used), Year of construction: 2001, functionality: fully functional, GUBISCH Centromat CW3 Used machine for window and door production with 50 mm Ø spindles in longitudinal profiling The following parts have already been replaced: Energy chain and electrical wiring to the slot table; Sound insulation mats in the covers; Pneumatic hoses; Bearing for counter disk; Gluing side in the longitudinal area; Rotary encoder for second slot spindle; Bearing for slot table; PC has been cleaned and checked; Various pneumatic cylinders; V-belt. Cedpfxexgqlue Ac Norb

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Crjdpoy Hl Nqofx Ac Nsb

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. Crjdevca Nrepfx Ac Neb A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. Crsdou Nf Nzopfx Ac Neb 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 with separate wire feed case Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires, steel [Ø in mm]: 0.6 - 1.6 Weldable wires, stainless steel [Ø in mm]: 0.8 - 1.2 Weldable wires, aluminium [Ø in mm]: 1 - 1.6 Weldable wires, CuSi [Ø in mm]: 0.8 - 1.2 Voltage adjustment: Continuous MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Weldable electrodes [Ø in mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Process-independent data Open circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Mains: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Line protection 3~ (50/60 Hz) [A]: 32 Positive mains tolerance 3~ (50/60 Hz) [%]: 15 Negative mains tolerance 3~ (50/60 Hz) [%]: 15 Mains plug: CEE 32 Standards and approvals Protection class: IP32S Insulating material class: F Standard: EN 60974-01 Marking/Certification: CE, S Cooling type: Gas-cooled, water-cooled Cooling Nominal cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Crodsy Ia Hmopfx Ac Neb Dimensions (L x W x H) [mm]: 880 × 490 × 885 Dimensions wire feeder case (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Condition: excellent (used), Working height: 100 mm Flat steel: 100 x 10 or 80 x 12 or 30 x 20 mm Square steel: 22 mm Round steel: 25 mm Angle steel: 100 x 10 mm Aluminum flat bars: 100 x 30 mm Codpfx Aoydbfhec Nerb Required space: 500 x 600 mm

Condition: used, Year of construction: 2011, overall weight: 1,622 kg, load capacity: 240 kg, arm reach: 2,700 mm, This is a used, tested welding robot system comprising a KUKA KR 240-2 2000 and a KRC2 ed05 controller from 2011, combined with a welding unit from SKS Welding Systems. The system is designed for industrial welding and automation applications and is typically used for arc welding, heavy-duty assembly operations, and combined handling/welding tasks. The robot has a payload capacity of 240 kg and a reach of 2700 mm, making it suitable for large-scale workpieces. The system is equipped with an SKS LSQ 4 welding power source featuring wire feeder, welding torch, and a complete hose package. Csdpfey Nfl Dsx Ac Norb

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Technical data: 380 volts Welding range 5-240Amps Welding power: 240Amps at 35% ED 170Amps at 100% ED Crodpfxjfthy Rs Ac Nob 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Crodpfxey Nl U Sj Ac Neb

Condition: new, table length 1500 mm table width 1500 mm table height 150 mm bore 28 mm Crjdpfjy N D N Usx Ac Nsb weight 543 kg

Condition: good (used), 1 used MIG MAG welding machine Manufacturer: Lorch Model: Micor Mig 400 Welding range 3~ 400 V [A]: 30 - 400 Voltage range [V]: 15.5 - 34 Weldable wires steel [Ø mm]: 0.6 - 1.6 Weldable wires stainless steel [Ø mm]: 0.8 - 1.2 Weldable wires aluminium [Ø mm]: 1 - 1.6 Weldable wires CuSi [Ø mm]: 0.8 - 1.2 Voltage adjustment: stepless MIG-MAG duty cycle Duty cycle 100% (40°C) [A]: 300 Duty cycle 60% (40°C) [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 Electrode welding Welding range 400 V [A]: 10 - 400 Voltage range [V]: 20.4 - 36 Cjdpfx Asy Hfwnec Nsrb Weldable electrodes [Ø mm]: 1.5 - 8 Electrode duty cycle Duty cycle 100% (40°C) [A]: 290 Duty cycle 60% [A]: 370 Duty cycle at max. welding current (40°C) [%]: 45 General specifications Open-circuit voltage [V]: 76 - 83 Standard wire feed speed [m/min]: 1 - 25 Power supply: 400 V Mains voltage 3~ (50/60 Hz) [V]: 400 Mains fuse 3~ (50/60 Hz) [A]: 32 Max. positive mains tolerance 3~ (50/60 Hz) [%]: 15 Max. negative mains tolerance 3~ (50/60 Hz) [%]: 15 Power plug: CEE 32 Standards and certifications Protection class: IP32S Insulation class: F Standard: EN 60974-01 Markings/Certifications: CE, S Cooling type: Gas-cooled, water-cooled Cooling Standard cooling capacity (l/min) [kW]: 1.06 Tank capacity [l]: 4.3 Dimensions (L x W x H) [mm]: 880 × 490 × 885 Case dimensions (L x W x H) [mm]: 575 × 245 × 434 Weight [kg]: 61

Year of construction: 2011, condition: excellent (used), Cloos welding robot Qirox QRC 320 incl. control V 6, pedestal for standing arrangement, Cloos welding machine Quinto II 603 ( 600 A), wire feed, welding torch, torch hose package, mech. cleaning, pressure booster 1 rotary tilt table WPK 5000, pick-up weight 500 kg, 1 start preselection, 1 control for customer-provided sliding door gas nozzle sensor, arc seam search, point editor Unit will be completely overhauled and serviced before delivery. Second station with another, same rotary tilt table possible. Credpfxoizwv Ns Ac Nob

Condition: good (used), Year of construction: 2015, Welding fume filters, welding fume extraction systems, soldering fume extraction systems, mobile filter units, mobile welding fume extraction filter devices, welding fume extractors -Manufacturer: Kemper, filter unit for mobile welding fume extraction -Type: 63100 -Drive: 1.6 kW Crsdpjx Hvqfefx Ac Njb -Volume flow rate: 340 m³/h -Extraction arm: not included -Machine dimensions: 300/300/H690 mm -Weight: 23.5 kg

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V Csdpfx Aey A Iftec Nerb -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm Cedpfx Acoy Au Nfo Njrb -Weight: 966 kg / 70 kg

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm Codpoy Au Eyefx Ac Norb -Operation: via foot pedal -Individual components: see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: good (used), Cordless angle drill/driver, cordless angle drill, Crjdpfow Iftqjx Ac Neb -Manufacturer: Bosch, Cordless drill/driver type GWB 7.2 VE -incl.: charger -Quantity: 1x drill/driver available -Transport dimensions: 240/180/H240 mm -Weight: 6 kg

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Codpfxov Ipcfe Ac Norb Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm

Condition: like new (used), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R Cjdpfspa N Aajx Ac Nsrb - cooling unit FK4000-RFC (4,045,837,632) water cooled - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: new, Year of construction: 2025, AORE 3in1 from stock europe is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price Codpjk Radiefx Ac Nsrb Welding seam requirements: ≤0.5mm Welding speed: 0-120mm/s Cooling method: dual temperature dual control intelligent refrigerator Operation temperature range: 5-40℃ Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, working range: Cedpfx Asy Er Uqjc Nerb X-axis: 2.000 mm Y-axis: 1.200 mm Z-axis: 190 mm welding power: 20 kA welding force: 2 x 5 kN