Used Angle Welding for sale (11,468)

Condition: new, table diameter 1000 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,25 U/min max. torque on the faceplate 900 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,37 + 0,75 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical. Hsdpefv Aw Esfx Abusw

Condition: new, table diameter 1400 mm table load 3,0 t swivelling range 0 - 135 Grad turning speeds 0,05 - 0,5 U/min max. torque on the faceplate 6000 Nm table pass 200 mm welding current 700 Ampere total power requirement 1,1 + 2,2 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. Hjdpfx Aofv Axbebujw • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, table diameter 1400 mm table load 5 t swivelling range 0 - 135 Grad turning speeds 0,05- 0,5 U/min Hsdpfxefv Azdo Abuew table height adjustment von 1100 bis 1950 mm max. torque on the faceplate 7000 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, number 55 Positionen 16 mm condition neu weight 23 kg Set 2 55 pieces, 16mm system, consisting of: Clamps: 6 x 160610 Clamps: 2 x 160630 Prism: 4 x 160645.1.N Bolt: 18 x 160511 Stop: 4 x 160410.N Stop: 6 x 160420.N Angle: 6 x 160108.N Angle: 6 x 160110.N Angle: 2 x 160162.N Accessory set. 1 x 163999 Hsdpfxegarhyo Abujw Price plus packaging and transport.

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds Hedpfx Aboibw Sxjujw The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table length 1200 mm table width 800 mm table height 840 - 890 mm weight of the machine ca. 0,3 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Hedpfxeih D Ape Abujw Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Pallet truck is not included in the scope of delivery

Condition: new, number 65 Positionen 28 mm condition neu weight 49 kg Basic-Set 3: 69 pieces, 28mm system, consisting of: Hodpsupw Stefx Abuow Forceps: 10 x 280604 Bolt: 18 x 280511 Stop: 10 x 280420.N Angle: 6 x 280110.G Angle: 4 x 280162.N Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 3 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, number 37 Positionen 28 mm condition neu weight 35 kg Basic set 2: 51 pieces, 28mm system, consisting of: Forceps: 8 x 280604 Bolt: 12 x 280511 Stop: 8 x 280420.N Hodpfxsupxpae Abujw Angle: 4 x 280110.G Threaded bolt 8 x 280543 Stop 8 x 160415 Stop 2 x 284050 Accessory set. 1 x 163999 Price plus packaging and transport.

Condition: new, table length 2400 mm table width 1200 mm Hjdpfx Absgvkfvjujw table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm Hjdpfx Absgvkf Dsuew table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, table diameter 350 mm Hsdpfjgvkk Nox Abujw table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table length 1200 mm table width 800 mm 28 mm table height 450 - 800 mm 500 kg weight of the machine ca. 0,8 t Hodpfoh Dqb Ssx Abuew Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Ribbed underside for reinforcement.

Condition: new, welding current max. 300 A open-circuit voltage 55 - 76 V connected load frequency 400 V weight 75 kg Dimensions (LxWxH) 950 x 560 x 880 mm Inert gas welding machine: - with pulse function Hjdpfx Aou Aw Shsbuow - 300 amps - 400 volts - hose package 3m. - ground cable - Wire feed rolls for 0.8 - 0.9 - 1.0 - 1.2 - 2.5 - 3.2 - 4.0 and 5.0mm

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 Hedpfxo Aazd Eo Abuew *Noise silencer Stock number: 1178

Condition: used, functionality: unexamined, Spot welding machine. Hedpfxe Aazw Eo Abusw

Condition: used, Harms Wende Welding Technology HWG2708SK-01 HW2000 Control Manufacturer: Harms Wende Product Area: Welding Technology Hedpfxexl D Igo Abuow Type Designation: HWG2708SK-01 Note: For detailed technical data and processing instructions, we strongly recommend consulting the original data sheets or contacting the manufacturer directly. You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Hsdpfxswhzg Us Abuew

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V Hjdpfeg U Tccox Abusw connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles

Condition: new, table length 1000 mm table width 1490 mm table height 840 - 890 mm weight of the machine ca. 0,4 t Welding table / perforated table: Hole diameter: 28mm The table is made of 15mm thick, high-alloy steel S355 JR T = 15 The surface is untreated. Sidewalls 165mm height adjustable from approx. 880 - 980mm Ribbed underside for reinforcement. including floor storage Accessories optional !! Surface flatness 0.2 - 0.4mm on 1000mm. The table can be moved with a pallet truck. Hjdpfxoh Dqb Is Abuow Pallet truck is not included in the scope of delivery

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0 - 90 Grad turning speeds 0,25 - 4,0 U/min 360 Nm Hsdpfx Absfv Axqsuew welding current 500 Ampere total power requirement 0,4 / Hand kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 700 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,2 - 2,0 U/min 900 Nm Hjdpfx Abofv Axuoujw total power requirement 0,37 / 0,37 kW • Self-locking gear, therefore no forward and backward at eccentric Load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch.

Condition: new, table diameter 1300 mm table load 3 t swivelling range 0 - 130 Grad turning speeds 0,05 - 0,5 U/min 6000 Nm 0 1,1 / 1,1 kW welding current 700 Ampere • Self-locking gear, therefore no forward and backward at eccentric load. • Electronic components from Schneider, Siemens and Delta. • Frequency-controlled stepless speed of the turntable. • High stability due to the robust construction. • welding power transmission • CE certificate. • Very good price / quality ratio. • The D-HBE series comes as a standard version with a cable remote control and delivered with a footswitch. Hodsfv Ax Hspfx Abuow

Condition: new, table diameter 1200 mm table load 3 t Hodofv Azaopfx Abuow swivelling range 0 - 135 Grad turning speeds 0,07- 0,7 U/min table height adjustment von 980 bis 1750 mm max. torque on the faceplate 4500 Nm welding current 700 Ampere including remote control and welding current transmission.

Condition: new, table diameter 700 mm Hjdpfx Aefv Azljbuew table load 0,5 t swivelling range 0 - 135 Grad turning speeds 0,2 - 3 U/min height adjustment 400 - 900 mm boring diameter 100 mm welding current max. 500 Ampere total power requirement 0,75 kW including remote control and welding current transmission.

Condition: new, table length 2400 mm table width 1200 mm table height 850 mm Vertikal stroke 40 mm weight of the machine ca. 0,55 t dimensions 2,4 x 1,2 x 0,9 m Hjdpfx Abegarhnsusw Welding table "SIEGMUND Professional 750 + plasma nitrided" is made of high quality steel S355J2 + N and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0mm. The holes have a diameter of 16mm. Hole arrangement in 50 mm grid on the table top, parallel hole arrangement in a 25 mm grid on the sides. Including basic equipment. Table height 850mm Accessories shown are optional. Price plus packaging and transport.