Used Anvil Substructure for sale (311)

Condition: good (used), Bandsa for re-sawing blocks and planks type Canali multiline ML 1100 with 3 band saw units Nsdjz Hbh Depfx Ah Sodc Sawpully, width 105 mm, max width of saw blade 120 mm. Speed of the bandsaw blade 28/32/36/42 m/sec Feed-work has below measurements. - Height of feed rollers 200 mm - Diameter of feed rollers 100 mm - Max opening saw blade to anvil side 230 mm - Max opening saw blade to pressure side 230 mm - Max opening Center cut 460 mm

Condition: new, maximum load weight: 8,970 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,300 mm, loading space width: 2,460 mm, loading space height: 400 mm, total length: 8,400 mm, total width: 2,550 mm, total height: 3,260 mm, Year of construction: 2026, Equipment: ABS, * Chassis and substructure hot-dip galvanized * Aluminum side panels anodized * Ramp length approx. 2,600 mm * Ramp width approx. 520 mm * Sliding, galvanized steel ramps with grating surface * Plug-in side panel between the ramps (optional) * Ramps can be shifted laterally and are spring-supported * Floor sloped at the rear * Loading height 920 mm * Approach angle 16° * Floor made of 40 mm soft wood planks * 3 pairs of lashing rings, 6 tons each, in the bridge floor * 7 pairs of lashing rings, 2 tons each, in the outer frame * Tires 235/75 R 17.5 * Parabolic suspension Ndodpszrq A Djfx Ah Soc * 40 mm drawbar eye * ABS * Automatic load-dependent air brake with release valve * Drawbar continuously adjustable in height * Coupling height 700-1000 mm * Reinforced gearbox support winch with load and fast gear * 2 support legs at the rear Price ex works. Additional charge for delivery from Bernkastel-Kues: 500 EUR + VAT Additional charge for plug-in rear panel: 100 EUR + VAT

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Nedei Rlhkopfx Ah Sodc Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Year of construction: 2022, condition: good (used), Manufacturer / Model: Grafotronic DCL2 550 Serial Number: 220520G Web Width: 550 mm Year of Manufacture: Location: Germany Condition: Used – in production CE Marking: Yes _____ Main Configuration Unwinder Module: • Max. roll Ø 1000 mm / weight 430 kg • Ultrasonic sensor and web guide ±15 mm • Splice table with clamps, servo brake, reel lift Flexo Printing / Coating Module (10–24" repeat): • GEW E2C UV dryer • Ceramic anilox 400 l/cm – 5.5 cm³/m² • Stainless steel ink pan 1.2 L, reverse-angle doctor blade • Re-register drive for overprinting • Max. speed 100 m/min – tolerance ±0.1 mm Ndodpsxq A Hlofx Ah Soc Die-Cutting Module (10–24" repeat): • Servo register system, anvil & support roller • Contact matrix rewind, stripping bar • Delam/Relam before die-cutting (limit 70 m/min) • Max. speed 250 m/min, tolerance ±0.1 mm Inspection & Slitting Section: • Missing Label Detection (MLD) up to 220 m/min • Automatic Sci-Fi knife system (12 sets) • Vacuum edge-trim removal • Auto-set under/back scorer (2 knives) Semi-Automatic Turret Rewinder: • 2 × Ø 600 mm rolls • Semi-automatic cutting and push-out system • Label & meter counters • Core diameters 40–76 mm Additional Equipment: • Anti-static brush • Tablet with housing and accessories • ERP interface • Crane for magnetic cylinders Materials: • Foil 30–250 µm • Paper 100–250 µm _____ General Condition: Overall in good working order. According to the operator, two UV units require lamp replacement, which represents a minor cost. All other modules are fully functional.

Condition: used, Year of construction: 2003, Filter area: 50 m² Exhaust connection: 300 mm D Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Motor: 1.5 kW Briquette press Schuko C 800 - 2 Connection value: 3 kW Throughput: approx. 35 - 55 kg/h, depending on the material With extinguishing system Weight: approx. 1200 kg Ndsdpfxozb N T Uj Ah Sec Storage location: Nattheim

Condition: used, Year of construction: 2018, functionality: fully functional, total length: 7,120 mm, total width: 1,020 mm, total height: 800 mm, TAF article number: 1000003853 Manufacturer: S-Serv Year of construction: 2018 Overall dimensions: approx. 7,120 x 1,020 x 800 - 1,100 mm Width incl. side panel: 900 mm Side panel height: 90 mm Ndsdpfx Ajr D Ntqeh Ssc Width incl. drive: 1,020 mm Conveyor length: 7,070 mm Conveyor width: 800 mm Belt type: PVC, smooth Belt width: 800 mm Substructure: incl. supports H: 800 to 1,100 mm Drive: Head drive Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 230-400 volts Conveying speed: 0.1 m/s, constant Special features: incl. side guide, H: 40 mm Condition: Used / fully functional Function test: OK

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Nodoi Rnvcspfx Ah Sjdc Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 1,001 km, first registration: 01/2014, color: white, driver cabin: other, gearing type: other, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,180 mm, Year of construction: 2014, Vehicle location: Bovenden. Features: doors, swing-out side panels. Nsdpoi Rmf Djfx Ah Sedc Body: Orten beverage transport body, Kettliner-Light type, with load securing system. Floor made of approximately 27mm thick screen-printed laminated panels, front wall made of aluminum profiles, double-wing rear doors made of aluminum, substructure in steel lightweight construction, sliding rear load securing system allsafe-Jungfalk "CRS", attachment device for a forklift that can be carried on board, lateral loading height approximately 2180mm. Removal of Scania R450 LB 6x2-4 with 4700mm wheelbase! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, tire size: 385/65-22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, fuel tank capacity: 630 l, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, loading space length: 6,600 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, power mirror, retarder, soot filter, trailer coupling, - Aluminum fuel tank - Heated exterior mirrors - Heated mirrors - Co-driver's seat - Differential lock Ndjdpfxszw Aafs Ah Sec - Speed limiter - Catalytic converter - Automatic climate control - LED lighting - Air suspension - Air-sprung seats - Particle filter - Radio/Multimedia system - Disc brakes - Sun visor - Lane keeping assist - Windshield - Additional steering axle Internal number for customer inquiries: 6-067 IMMEDIATELY AVAILABLE -> Model and year of manufacture 2026 Mercedes-Benz Actros 2648 L 6x2 Air suspension Front + Air suspension rear !!! as a dump truck with loading crane PALFINGER PK 22002 EH or FASSI F235 or F255, each with 4 or 6 extensions Vehicle: SECONDARY OIL RETARDER HIGH PERFORMANCE ENGINE BRAKE ENGINE OM471, R6, 12.8 L, 350 KW (476 hp), 2300 NM ENGINE DESIGN EURO VI, E TRANSMISSION G 281-12/14.93-1.0 (12-speed automatic) SIDE PTO, SINGLE 385/65 R 22.5 315/80 R 22.5 TANK 630 L ADBLUE TANK 75 L, TOW HITCH, STANDARD, D50, VBG (40mm would also be possible, would be exchanged) DISC BRAKE, ON FRONT AND REAR AXLE M-CAB CLASSICSPACE, 2.30 M DRIVER'S AIR-SPRUNG SEAT, COMFORT LEATHER STEERING WHEEL REARVIEW CAMERA, TOWING VEHICLE END MULTIMEDIA COCKPIT INTERACTIVE 2 WITH NAVIGATION SYSTEM AIR CONDITIONING SYSTEM LED HEADLIGHTS, LED TAIL LIGHTS, LED TURN SIGNALS, FOG LIGHTS LED CRUISE CONTROL Packages: SIGHT PACKAGE, WITH LED HEADLIGHTS COMFORT PACKAGE, FOR S/M-CAB SAFETY PACKAGE, WITHOUT ROLL STABILITY CONTROL SMOKER PACKAGE VEHICLE DESIGN ACCORDING TO GSR, PHASE C MERCEDES-BENZ ONROADSERVICE ATS WARRANTY ACCORDING TO TERMS AND CONDITIONS, 3 YEARS/450,000 KM ATS WARRANTY ACCORDING TO TERMS AND CONDITIONS, 4TH YEAR/600,000 KM Superstructure: Dump body: Dimensions 6.600 x 2.480 x 1.000 mm Side walls 1x split (2 flaps) per side, with side wall relief Substructure: Steel construction, KTL + powder coated and/or hot-dip galvanized Hole frame for good load securing Center lashing rail Toolbox Support leg plates including bracket Cranes: Fassi F235 loading crane: Load capacity at 12.7 m is still 1,345 kg or 17.1 m at 740 kg Slewing range 400° Double knuckle system with PROLINK (over-extendable boom up to 15°) Electronic overload protection system with FX500 Fassi RCS Funk maxi - 6 functions » with 3 joysticks (2-2-2) Emergency stop, as well as optical alarm (90% and 100%) including adjustable digital slewing limit FASSI stability control FSC incl. LMB II Control system for 2 additional functions with »2 hose connections / e-dynamic with 4-fold and 6-fold extension in stock alternatively: PK 22002-EH – PALFINGER HIGH PERFORMANCE TRUCK LOADING CRANE -Lifting moment: 205.0 kNm (20.9mt) -Classification HC1 HD4/B3 according to EN12999 -Fast-acting extension system with oil return and internal oil routing -Double knuckle with Power Link Plus 15° -Slewing mechanism with slewing cylinders -Slewing range 400° -Electronic HPLS control unit (for two pressure ranges) -Individual support leg control with lockable check valves on the support cylinders -Spiral hose from the base to the main arm - with 4-fold and 6-fold extension in stock Price: From €219,990.00 net, depending on crane type and design. Individual financing is available with one of our...

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Ndodoqylk Uepfx Ah Ssc Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Ndodpfezrhhwjx Ah Sjc

Condition: used, transversal substructure for planing machine Nsdpoimz Egsfx Ah Sjdc Move the planing machine in order to be able to use the planer knives over the entire knife length and the zero line is retained REX Hobelmaschine Querverstellung REX planing machine transverse adjustment Réglage transversal de la raboteuse REX Length 2850 mm / width 2600 mm / height 250 mm + bracket 215 mm

Condition: used, Year of construction: 2024, Three-point attachment for dry material only Hydraulic folding feed table for / round and square bales Grinder and feed table firmly bolted to stable / substructure construction 2x DW hydraulic connection required Giraffe ejection in driving / left direction Ndjdpfxotrdztj Ah Soc

Year of construction: 2008, condition: ready for operation (used), A refrigeration system including free cooler, drip tray with substructure, piping, connection lines and control system is available. 1) Eurocooler refrigeration system: Refrigerant: R407C, cooling capacity: 235kW, water circulation rate: 38m³/h, glycol content: 35%, compressor capacity: 80kW, fan capacity: 33280m³/h, condenser surface area: 10.89m². Machine dimensions X/Y/Z: approx. 2200mm/4600mm/2100mm, empty weight: approx. 3150kg. 2) Dry cooler (free cooler) GQ2590.BX, recooling capacity: 233kW, volume flow: 34.9m³/h, air volume: 129000m³/h, surface area: 1844m². Machine dimensions X/Y/Z: approx. 9300mm/2400mm/1600mm, empty weight: approx. 1750kg, working hours: over 70000h. The changeover valve of the compressor of the free cooler is defective. Documentation available. On-site inspection is possible. Ndedpfx Ahev Ip Tde Ssc

Condition: good (used), Year of construction: 2016, functionality: fully functional, total width: 540 mm, total length: 1,050 mm, overall weight: 10 kg, conveyor belt width: 500 mm, inner radius: 800 mm, outer radius: 1,600 mm, TAF article number: 1000005015 Manufacturer: unknown Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 90° x 1,050 x 70 Width incl. cheek in mm: 540 Cheek height in mm: 60 Conveyor width in mm: 500 Substructure: Not available Curve (degrees): 90° Curve radius, inside in mm: 800 Curve radius, outside in mm: 1. 600 Idler roller Axle type: Threaded rod M8 / nut M8 Idler roller diameter: in mm 50 Idler roller per axle: 1 Idler roller material: Plastic Ndsdpfx Aewylzaeh Soc Roller pitch, inside in mm: 55 Roller pitch, outside in mm: 100 Drive: Gravity Net weight in kg: 10 Function test: Used, fully functional Condition: Ok

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control Ndedpfxszzaz Uo Ah Soc • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: used, Vibrating spiral conveyor / sorting device / spiral conveyor / vibrating conveyor GRIMM Type VZ 40 L Year of manufacture: 1998 Top diameter (upper): 620 mm Top diameter (lower): 350 mm Top internal height: approx. 200 mm Sorting track width: 50 mm Overall height (drive + top with sorting track): 430 mm Overall height (drive + top with sorting track and enclosure): 500 mm Mains connection: 220 volts, 50 Hz. - Substructure with stepless height adjustment, manually operated via threaded spindle, approx. 1250 to 1700 (top edge of the soundproofing enclosure) - Rubber coating inside the top partially worn Space requirement L x W x H: 850 x 730 x 1250 mm Weight: 185 kg Ndodpfx Ahjzugqij Sjc The device is normally operated with an intermediate device for stepless speed control. This device is not included. A spiral conveyor always consists of two essential components: 1) Sorting top, in which the parts are aligned 2) Drive, which generates vibrations in the sorting top through mechanical oscillations and thus sets the parts in motion.

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2026, * 230 volt cooling unit * Flat ceiling evaporator * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar * Overrun brake * Sturdy support wheel * Car ball coupling * Interior ceiling light * Scuff plate all around * Alko tandem axle * Double wing door at the rear Ndedpfx Ahorb T Nlj Sjc * Galvanized substructure

Condition: new, maximum load weight: 1,680 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,400 mm, loading space width: 1,820 mm, loading space height: 2,000 mm, loading space volume: 12 m³, total width: 2,300 mm, total height: 2,700 mm, Year of construction: 2026, * 230 volt cooling unit * Flat ceiling evaporator Njdpfx Ajrb T Npeh Ssdc * 60 mm insulation * 4 Terra spindle supports * Galvanized V-drawbar * Overrun brake * Sturdy support wheel * Car ball coupling * Interior ceiling light * Scuff plate all around * Alko tandem axle * Double wing door at the rear * Galvanized substructure

Condition: used, functionality: fully functional, conveyor belt length: 5,170 mm, conveyor belt width: 400 mm, conveyor belt speed: 350 mm/s, total length: 5,250 mm, total width: 565 mm, total height: 340 mm, Manufacturer: AXMANN Year of manufacture: unknown Nodpfx Ahew Uit Ie Sodc Overall dimensions: approx. 5,250 x 565 x 340 mm (LxWxH) Width incl. side panel: 485 mm Side panel height: 120 mm Width incl. drive: 565 mm Conveyor length: 5,170 mm Conveyor width: 400 mm Belt type: PVC, smooth Belt width: 400 mm Substructure: none Drive: head drive Motor: drum motor Conveyor speed: max. 0.35 m/s, constant Condition: used / fully functional Function test: OK

Condition: good (used), functionality: fully functional, Item no.: 1000003857 Used conveyor belt - 7,100 mm Technical Data: Manufacturer: WITTMANN Year of manufacture: unknown Overall dimensions: 7,100 x 1,200 x 1,300 mm (LxWxH) Width incl. cheek: 1,100 mm Side panel height: 40 mm Width incl. drive: 1,200 mm Nedpfotnf N Tsx Ah Sjdc Conveyor length: 7,100 mm Conveyor width: 1,000 mm Belt type: PVC, smooth Belt width: 1,000 mm Substructure: incl. supports (H: 700 to 1,000 mm) Motor: Gear motor Motor data: SEW, 0.12 kw, 50-60 Hz, 230-400 volts Conveying speed: 0.1 m/s, constant Special features: 16 mm drive shaft, side guide (H: 40 mm) Condition: Used / fully functional Function test: Ok

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Njdpjmdpafjfx Ah Sodc Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Year of construction: 2024, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The system was purchased in 2024 and has not yet been put into operation due to an order backlog! The new price of the system was €672,000 plus VAT! According to the documentation, the system’s production started in 2023. The final assembly took place in 2026. The video is an example video. It does not show the actual system that is for sale! The system has the following configuration: TECHNICAL DETAILS Storage type: Single-deep storage, double-deep Total capacity: approx. 4,540 containers Permissible container weight: 30 kg per container Block on the picking side Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 1,974 Storage locations for 170 mm boxes: 276 Block on the back of the storage Rows: 46 Levels: 25 Storage locations for 120 mm boxes: 2,020 Storage locations for 170 mm boxes: 276 Rack and pinion stacker crane Type: AP 31 including double-deep feed table Direction of movement: Horizontal Acceleration: max. 3.5 m/s² Speed: max. 3.5 m/s Box feed Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Pneumatic stopper, side: 1 piece Drive: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Emergency stop button: 1 piece Box storage Pneumatic lowering for containers: 1 piece Roller conveyor technology: approx. 4.5 m Nsdpfxeznc R Se Ah Sodc RollerDrive element: 1 piece Pneumatic stopper, side: 1 piece Drive: 1 piece Control of the RollerDrive element: 1 piece Electric drive with inverter: 1 piece Pneumatic drive: 2 pieces Express retrieval Gravity roller track: 1.3 m Substructure for storage stiffening: 2 pieces Special feed RollerDrive element: 1 piece Substructure for storage stiffening: 2 pieces Control of the RollerDrive element: 1 piece Pick by Light workstation RollerDrive element: 1 piece Projector: 1 piece Superstructure for storage stiffening: 1 piece Control of the RollerDrive element: 1 piece Projector control: 1 piece Further technical details can be found in the attached offer.

Condition: used, Year of construction: 1993, functionality: fully functional, conveyor belt length: 2,730 mm, conveyor belt width: 360 mm, conveyor belt speed: 50 mm/s, total length: 2,730 mm, total width: 490 mm, total height: 1,620 mm, power: 0.762 kW (1.04 HP), motor manufacturer: BONFIGLIOLI, Equipment: type plate available, TAF item number: 1000004806 Manufacturer: trio-technik Year of manufacture: 1993 Overall dimensions: 2,730 x 490 x 1,620 mm (LxWxH) Ndedpfx Ahswgmrmo Ssc Width including side panel: 490 mm Width including drive: 490 mm Side panel height: 80 mm Total conveyor length: approx. 2,820 mm Conveyor length, horizontal: approx. 820 mm Conveyor length, vertical: approx. 2,000 mm Conveyor width: 360 mm Belt type: PVC, cleated belt Belt width: 400 mm Cleats: H = 20 mm, cleat spacing = 400 mm Substructure: mobile, height-adjustable, max: 1,620 mm | min: 1,250 mm Drive: chain drive Motor: gear motor Motor data: 0.762 kW Conveyor speed: 0.05 m/s, constant Net weight: 82 kg Special features: incl. ON/OFF switch Condition: Used / fully functional Function test: OK

Condition: used, functionality: fully functional, conveyor belt length: 3,330 mm, conveyor belt width: 35 mm, total length: 3,480 mm, total width: 950 mm, total height: 750 mm, Item no.: 1000003858 Conveyor belt not driven - 3,480 mm Manufacturer: unknown Year of manufacture: unknown Overall dimensions: 3,480 x 95 x 75 mm (LxWxH) Width incl. cheek: 95 mm Cheek height: 50 mm Width incl. drive: - Conveyor length: 3,330 mm Ndsdpfx Asrz Rlieh Sjc Conveyor width: 35 mm Belt type: PVC, smooth Belt width: 30 mm Substructure: without Drive: head drive Motor: without (optionally available - on request) Motor data: - Conveyor speed: - Special features: - Condition: Used / fully functional Function test: OK