Used Anvil Substructure for sale (271)

Condition: new, empty load weight: 860 kg, maximum load weight: 1,740 kg, overall weight: 2,600 kg, axle configuration: 2 axles, loading space length: 3,600 mm, loading space width: 1,700 mm, loading space height: 1,900 mm, loading space volume: 11.6 m³, color: silver, construction height: 2,530 mm, working width: 2,290 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * TECHNICAL DATA: - Make: Unsinn - Model: UKT 6C 3617-26-14 - Vehicle type: Refrigerated trailer - Vehicle condition: New vehicle - Initial registration: without initial registration - TÜV/HU: 2 years from initial registration - Internal dimensions (LxWxH): 360 x 170 x 190 cm - External dimensions (LxWxH): 542 x 229 x 253 cm - Floor loading height: 53 cm - Perm. Total weight: 2,600 kg - Unladen weight: 860 kg - Payload: 1,740 kg - Chassis: Low loader (wheels next to the body) - Tires: 185/65R14 - Chassis: ALKO rubber suspension - Support wheel: Yes, automatic - 100km/h approval: Optional EQUIPMENT: - Brake: Yes - Number of axles: 2 - Floor: Wooden floor - Walls material: Sandwich (sheet steel/foam 40mm/sheet steel) - Roof material: Sandwich (sheet steel/foam 40mm/sheet steel) - Color: Grey - Number of pallet spaces: 6 - Tipping / lowering function: Without - Overrun device/brake: ALKO - Frame/chassis: Aluminium substructure - Galvanization: Hot-dip galvanized - Drawbar: V-drawbar, bolted, U-profile - Mudguards: Plastic mudguards - Side door: No - Cooling unit: GOVI Arktik 1600 N - Temp. Control range: +2 C to +10 C - Cooling capacity: 1800 W - Rear doors / tailgate: Rear doors - Locks for box body: Press lever lock - Drive-on angle: - - Supports: Yes - Lashing rails: Optional, can be retrofitted - Lashing eyes: Optional, can be retrofitted - Interior light: Yes - Rear lighting: Incandescent bulbs, lamps recessed in rear frame - Plug for lighting: 13-pin - Vehicle documents: ZBII & COC papers DESCRIPTION: - Unique, torsion-resistant aluminium chassis for safe driving characteristics - Loading area made of multi-glued screen printing plate, 18 mm - 4 stable telescopic crank supports for up to 6000 kg standing weight - Thermo-sandwich body - Inner and outer skin made of hot-dip galvanized and powder-coated sheet steel, 40 mm PU core insulation - Exterior color silver RAL 9006 - Double-wing rear door with aluminium hinges - Refrigeration compartment press lever lock and stainless steel door stop - Rear frame and edging profiles made of special anodized aluminium profiles for attractive aesthetics 200 mm impact protection at the bottom, all-round on 3 sides - Arktik 1600 N refrigeration unit - cooling capacity 1800 watts at a cold room temperature of +6 C and an ambient temperature of 30 C - temperature control range from +2 C to +10 C - evaporator air flow rate: 750 m - Fully encapsulated unit with outdoor housing mounted at the top of the front - Environmentally friendly CFC-free refrigerant - Electronic automatic defrosting of the evaporator - The operating display can be locked and is therefore protected against unauthorized operation - Electronic digital thermostat for optimum control of the temperature range - 230 volt interior lighting - Very stable V-drawbar REINFORCED - ALKO overrun device and parking brake - Automatic reverse drive - Plastic mudguards - 13-pin plug - Reversing light - Large reversing light - Large reversing light - Automatic reverse drive - Plastic mudguards - 13-pin plug - Large reversing light - Large reversing light - Large reversing light - Large reversing light Reversing lights - Large safety lighting - Integrated rear fog light - Lighting recessed in rear frame - Reinforced automatic support wheel Optional retrofitting accessories: - 100km/H approval - Slot-and-hole rails - Rubber-coated bar rail - Steel or aluminum locking bar Rjdpfxou Hrvpj Alcscf

Condition: new, power: 212 kW (288.24 HP), fuel type: diesel, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 2,640 mm, loading space length: 7,280 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2025, Equipment: ABS, air conditioning, Equipment: - Extended day cab - Translucent sun visor - Halogen headlights with dual reflectors and impact-resistant Lexan lens covers - Bumper-mounted fog lights - Green-tinted windows - Mirror arms suitable for body widths 2.50–2.60 m - Central locking system - Adjustable roof spoiler - Long side fenders - Cab color: H3275WHTE - Headlight surround and bumper color: Stone Grey - Roof spoiler in cab color - Side fender color: cab color - Chassis color: grey - Air-suspended luxury driver's seat - Armrest on driver's seat - Fixed co-driver's seat - Engine tunnel storage compartment - Manually operated air conditioning with recirculation function - Manually operated roof hatch - ECAS remote control - 10-year subscription to PACCAR Connect - Digital (intelligent) tachograph VDO DTCO - DAF infotainment system - Combined antenna for AM/FM, GSM, and GPS - DAF Drowsiness Detection - Lane departure warning system - Electronic Vehicle Stability Control (VSC) - Acoustic reversing warning system - Hill start assist - Safety system alerting the driver to moving objects on the passenger side - Front axle type F60, parabolic suspension - Front axle: tire size 285/70R19.5, wheel size 19.5 x 7.50 - Driven rear axle(s): tire size 285/70R19.5, wheel size 19.5 x 7.50 - Supplier: Goodyear - Tire pressure monitoring - Steel disc wheels, silver-grey - Wheel trims without center part, silver-grey (RAL 9006) - Front axle: tire size 285/70R19.5, Goodyear type KMAXS2 - Driven rear axle: tire size 285/70R19.5, Goodyear type KMAXD2 - Engine PX-7, 6-cylinder diesel engine - Emissions standard Euro 6 - Idle shutdown system after 5 minutes idling - PowerLine automatic transmission, 8 speeds - PowerLine 8AP1200 automated transmission, ratio 4.89–0.64, 8 speeds - Automated gearbox control software - Rear axle ratio 4.63 - Driven rear axle with mechanical differential lock - ASR (traction control) system - Exhaust brake - Parking brake control with test position - Wheelbase 5.60 m / rear overhang 2.40 m - Longitudinal frame height 270 mm, thickness 6.0 mm. No inner reinforcement. Rcjdpfsyqdkasx Alcof - Plastic fuel tank, 200 liters - AdBlue® tank 30 liters - Wheel chock - Towing cross-member, D-value 85 kN, Dc-value 70 kN, V-value 25 kN. Trailer coupling D-value 85 kN. - Pneumatic connection for trailer with rotary couplings - Electrical connection for trailer (24 V) with two 7-pin sockets. An additional 7-pin socket for connecting the EBS system of the trailer/semitrailer - LED side marker lights - Body mounting BAM 1 - Alternator 100 A, batteries 2 x 175 Ah - Water separator with 30-micron filter and heating - Air intake at the top, behind the cab - Warranty Plus - Driveline warranty Platform body, internal length 7280 mm with Palfinger tail lift C 1500 ML pro BODY: - Platform body - Rear portal with top-hinged tailgate Body dimensions: - External length: approx. 7295 mm - Internal length: approx. 7280 mm - External width: approx. 2550 mm - Internal width: approx. 2480 mm - Internal height: approx. 2640 mm - Side loading height: approx. 2600 mm - Rear frame opening: approx. 2450 mm wide x approx. 2560 mm high - Substructure with longitudinal and cross members of galvanized steel - Floor thickness nominal 24 mm - Anti-slip phenolic coated floor - Drop sides of aluminum, height 500 mm - Galvanized outer frame with 13 lashing rings per side - Front wall of plywood, height 1,800 mm - 1 fixed aluminum board above the front wall - Front wall impact protection from 12 mm phenolic plywood, 1,180

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, Universal testing machine H5TMCI 250mm Extended mechanical structure: 2 backlash-free recirculating ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) Rcjdpomdpafsfx Alcsf max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Year of construction: 2026, pressing force: 500 t, DURENDUS 500 T Workshop Press – C-Frame Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here was built and delivered to a customer as a custom order. We can manufacture this machine for you on very short notice – with pleasure also considering individual options. This is a hydraulic workshop press designed for pressing, straightening, and assembly work in workshop and industrial environments. Base price: €46,950 net Options (on request): The listed options are based on completed customer projects and allow for targeted adaptation of the machine to each specific application. The base machine is a functional standard version – in most cases, it is supplemented with additional features and configurated specifically for the project. * Table plate with X-shaped T-slot 800 × 1,200 × 120 mm * Pressure adjustment * Lateral displacement of the press ram (1,000 mm) * Bending tool * Anti-rotation cylinder with manual travel adjustment * V-profile straightening anvil in combination with table plate * LED lighting * Foot switch * Cooling ===== Technical Data & Information: ==== General Information * Type: Workshop press * Press force: 500 t (optionally adjustable) * Total weight: approx. 5,000 kg * Overall dimensions (W × D × H): 2,950 × 1,100 × 2,850 mm ==== Working Area * Clear width: 1,600 mm * Open depth: 550 mm * Installation height: 250–900 mm (variable) ==== Table & Ram * Crossbeam usable width: 1,600 / 600 mm * Ram stroke: 400 mm Rcodoy H Drwspfx Alcsf * Cylinder diameter: Ø 400 mm * Piston rod: Ø 265 mm * Height adjustment: via chain mechanism ==== Speeds * Idle speed: 8.6 mm/s * Return speed: 15.3 mm/s ==== Hydraulics & Drive * Pump capacity: 65 l/min * Motor output: 30 kW * Hydraulic tank: 150 l * Pressure accuracy: ±5 bar * Hydraulic system: DUPLOMATIC ==== Control & Operation * Hand lever operation * Manual fine-tuning via hand lever * Connection: 400 V / 50 Hz * Total power consumption: approx. 32 kW ==== Equipment * Height-adjustable crossbeam with pin locking * Chain mechanism for table adjustment * Pressure gauge * Emergency stop switch * CE certification * Two-coat finish to RAL standard ===== Pressing, extracting, assembly work, straightening, workshop applications, maintenance Workshop press, hydraulic press, C-frame press, single-column press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your application? Contact us for a customized offer. Our hydraulic presses are manufactured in accordance with German machine guidelines, as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they fully comply with all aspects of the Brazilian national safety guideline NR 12, which builds on these standards. Our great strength is in special machine construction and press automation. We offer custom-made hydraulic presses at surprisingly affordable prices. For the hydraulic system, we mainly use components from leading European manufacturers.

Condition: excellent (used), Bosche volume scale 3D Silence 600 Volume and weight recording for master data recording and master data maintenance in the warehouse Precise volume and weight measurement for warehouse management and order picking. Non-contact measurement with laser sensors Weighing range up to 150 kg Easy integration into IT systems Ideal for precise freight calculation and master data recording ✔ Professional weighing technology ✔ Original BOSCHE quality Fast - Accurate - Reliable Features of the volumetric scale Static volume measurement of parcels Fast, non-contact dimensional measurement of packages Measuring frame made of powder-coated steel Low construction height for easy placement of parcels Weighing range 30 kg, 60 kg or 150 kg (weighing accuracy up to 10 g) Reliable weighing thanks to three calibratable, laser-welded load cells Three high-quality laser distance sensors with laser class 2 Measuring accuracy up to 1.5 mm Maintenance-free and wear-free design of the weighing technology Simple handling with high ease of use Easy integration into merchandise management and shipping systems Direct connection to existing PC systems via USB interface (or optionally via W-LAN) Data transfer to higher-level IT systems or WMS (warehouse management systems) in modern languages (SQL, CSV, REST) Simple process integration thanks to WINDOWS 10 operating system (WINDOWS network client) Intuitive software provides all data at a glance Weighing platform (powder-coated steel) 3 high-precision load cells (BOSCHE) Digital cable box with interface output Power supply via mains adapter Measuring stops for measuring non-cubic objects Area of application Parcel measurement => length x width x height => girth => volume measurement (accuracy to 1.5 mm) Master data acquisition - freight checkpoints Air freight control - Freight acceptance Packaging planning - calculation of packaging sizes for optimal shipping Capacity planning - planning of storage locations Profitability check of storage space and packaging processes Optimized forklift trips Best possible storage space utilization for trucks Rcedpfxjvtmp Tj Alcof Master data acquisition in seconds: height, length, width, weight Weighing technology - measurement technology The scale platform is connected to a Windows PC via an interface. The software included in the scope of delivery visualizes weight and dimension data directly on your Windows computer. The calculated volume and volume weight are also displayed. Construction The extremely flat weighing bridge substructure made of powder-coated steel is extremely robust. It is equipped with three laser-welded load cells. Volume measurement is provided by three high-quality laser distance sensors of laser class 2, which measure the length, width and height of the package to an accuracy of 1.5 mm. For optimum integration into your processes, the BOSCHE 3D scale is available in three different sizes. Weighing range: 30 kg, 60 kg or 150 kg. Supplied without software HxWxD = 1000 x 780 x 780 mm Product video Volume scale 3D Silence: List price € 8,663.00 gross Software VolumeScannerProfessional: 1.236,00 € gross Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, table length 2000 mm table width 1000 mm table height 900 mm table load 3000 Kg weight of the machine ca. 0,45 t dimensions 2,0 x 1,0 x 0,9 m Welding table / perforated table including accessory set WMT Basic-Set 2.0 Rcedoyv I Hwspfx Alcef The table is made of 25mm high-alloy, plasma-nitrided steel S355J2+N (St 52/3) Surface hardness 850 Vickers Surfaces that have been ground down and planed smooth. Hole diameter: 28mm, countersunk by 3mm 100 x 100mm grid Side panels 200mm Hole spacing in the side panels 50mm, diagonal grid Height adjustable from approx. 830 - 890mm Substructure reinforced with 140 x 15mm flat steel Including base bearings, 110mm diameter

Year of construction: 2023, condition: like new (used), machine/vehicle number: 530211, Properties: → robust machine housing made of cast iron → automatic loading and unloading of the test force → change between lens and indenter automatically → LED lighting → digital measuring eyepiece → LCD color display touch screen → Conversion to other hardness scales (e.g. HRC) → easy to use Technical data: → Test loads in kg (0.3 / 0.5 / 1 / 3 / 5 / 10 / 20 / 30) → Test method Vickers → Eyepiece 10X → automatic Revolver → Objectives 10X / 20X / 40X → Test force application 50µm/sec → height Capacity max. 210mm Rodec Ipc Ujpfx Alcocf → depth Capacity max.160mm → Conformity: DIN EN ISO 6507 / ASTM E-384 → Weight approx. 75kg → Power supply 230V / 50Hz Standard delivery: → Hardness tester → Diamond indenter 136° Vickers → Flat Anvil Ø80mm → V-Anvil Ø80mm → Eyepiece → Objectives 10X / 20X / 40X → LED lighting → Power cable → Accessory case → Operating instructions OPTIONALS: → VMS3-Software (Video-Measuring-System) → X/Y-Stage 200x200mm (Movement 25 x 25mm) → Digital micrometer (to transmit the edge distance to the VMS3-Software) → “Automatic measurement” module (only in combination with VMS3-Software)

Year of construction: 2023, condition: new, - modern ergonomic design - manual test with analogue Measuring Clock (Reading accuracy 0.2 HR) - easy to use and quick test process - Height Capacity approx. 185mm - Hepth Capacity approx. 160mm - Dimensions 545x182x755mm Test loads: 60 / 100 / 150kg Test method: HRA/HRB/HRC Rcjdpfjpbbc Hox Alcef Standard delivery: - Hardness tester - V-Anvil - Flat Anvil Ø150mm - Flat Anvil Ø50mm - Ball Indenter 1/16" with ball - Diamond indenter 120° Rockwell - Spindle protection - Accessory case

Condition: reconditioned (used), Year of construction: 2011, Universal tool milling machine Make: KUNZMANN Model: WF 400 MC Year of manufacture: 2011 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 410016 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 320 contouring control - HEIDENHAIN HR 410 electronic handwheel - attachment kit for TS 220 probe head with taper on the control panel and spindle lock - fixed table 650 x 375 (T-slot: 14 mm) - vertical milling head SK 40 with hydraulic tightening system DIN 69872 Rjdpfovdrx Uox Alcscf - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - rope left window of the spike protection cabin removable, electrically secured - control panel on the substructure - operating instructions used as seen The machine corresponds technically to the standard of the year of manufacture.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Rcodpfszfi A Asx Alcof Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; Rcjdpfx Alefbnhwocef -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;

Condition: used, Year of construction: 1976, machine/vehicle number: 761907, General / technical data: Heavy-duty mechanical swivel bending machine with a robust welded construction, in very good condition. Working width: 2000 mm Material thickness for steel ST 50 max.: 20 mm Opening of the upper die (clamping die): max. 475 mm Rsdpfx Alocvtbyscscf Adjustability of the bending die: 200 mm, motor-driven height adjustment Bending angle: 130°, adjustable via electrical angle input Upper die speed: 6 mm/sec Bending die rotation speed: 1.25 rpm (approx. 90 sec for a 90° bend) Backstop: motor-driven, adjustable from 50-999 mm, with digital length display Machine dimensions (h x w x d): 3600 x 4350 x 4400 mm (without pit / with bending die platform) Control cabinet dimensions (h x w x d): 1800 x 1200 x 400 mm Drive power, bending drive: 30 kW Drive power, upper die (clamping die): 22 kW Power supply: 500 Volt 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / special equipment: • 5 sets of bending tools, each consisting of a clamping and bending rail: R 8, R 12, R 15, R 20, R 40 • Foldable backstop • Central lubrication system • Machine documentation Note: • Machine comes from a repair facility. • A pit 900 mm deep (foundation) is required for the machine. The substructure of the swivel drive visible in the pictures is only used for test runs and demonstrations.

Year of construction: 2026, condition: new, DM Flat Conveyor Belt Type FB-700 without substructure for bulk material conveying Rcsdpfx Asyhznhjlcef Conveyor belt length: 6,000 mm Belt width: 650 mm Fabricated from structural steel, laser-cut, bent, and welded Base frame powder-coated in RAL 5015 Modular conveyor belt frame construction / sections available in transportable lengths. Frame structure extendable or can be shortened at any time. Carrier roller system on the return strand, shaft Ø60/15 mm Roller station spacing approx. 500 mm (custom options possible) Closer roller spacing in load area Drive drum + tail drum made of S235 steel, welded and machined Ø220x700 mm crowned, shaft fixed with pillow block bearings. Drive: Hydromec worm gear motor 1.1 kW, belt speed 1.15 m/sec Connection 400 V, 50 Hz, protection class IP54 Drive supplied prewired to motor terminal box (Commissioning must be performed by a qualified electrician) Motor mounted on right side in direction of transport, pull configuration. Bearing points equipped with robust UCF flange bearings incl. grease nipples. Rubber conveyor belt DM EP250/2 3+1.5 cover Chevron profile, 17 mm high x 650 mm wide Joint section without profile, endlessly hot vulcanized

Condition: new, Year of construction: 2026, Aluminum Incline Conveyor with Substructure (PU/PVC with Cleats & Corrugated Sidewalls) We offer a robust incline conveyor in aluminum construction design for the reliable transport of piece and bulk materials—ideal for industry, trade, recycling, woodworking, and much more. Thanks to cleats and corrugated sidewalls, secure material transport is ensured even on steep conveyor routes. _____ Technical Data (Sample Configuration): ✔ Infeed height: customisable ✔ Inclined section: length freely selectable ✔ Discharge height: customisable ✔ Substructure with adjustable leveling feet & machinery feet or with transport castors → for compensating uneven surfaces / stable positioning _____ Design / Frame: ✔ Aluminum construction profile ✔ Double profile 90x45 mm or reinforced triple profile 135×45 mm ✔ Continuous wear plate 2.0 mm galvanized or 1.4301 stainless steel (VA) _____ Rollers / Drive: ✔ Drive and deflection rollers made from S235 steel, welded & machined ✔ Diameters: Ø100, 150 or 220 mm Rodsyhzplepfx Alcecf ✔ Shafts fixed with pillow block bearings ✔ Drive: shaft-mounted geared motor 0.18 – 3.0 kW ✔ Belt speed: individually adjustable ✔ Connection: 230/400V, 50Hz, IP54 protection class (standard) ✔ Drive prewired up to the motor terminal box ➡️ Commissioning must be carried out by a qualified electrician _____ Conveyor Belt / Cleats: ✔ PVC conveyor belt DM 10/2 0+005 PVC green ✔ Belt widths: 100, 200, 300, 400, 500, 600, 700, 800, 900, or 1,000 mm ✔ Endless high-frequency welded (stepped joint) ✔ 2-ply, 3-ply with extra lateral stability ✔ Corrugated sidewalls: up to 80 mm high ✔ Cleats: customizable ✔ Pitch customizable _____ Options / Accessories Available: ✔ Infeed plates ✔ Hoppers / infeed hoppers ✔ Bunkers / loading bunkers ✔ Discharge hoppers ✔ Special lengths / special widths ✔ Cleats & corrugated sidewalls as required _____ ✔ Custom solutions made to your specifications ✔ Industrial quality ‘Made in Germany’ Dimensions, versions, and pricing on request Simply reach out—we provide fast and straightforward advice. Discover tailored solutions for your industry! As an innovative mechanical engineering company, we are proud to offer bespoke solutions for the recycling, food, and processing industries. Our comprehensive product portfolio covers everything from conveyor systems and flat belt conveyors to incline conveyors, angle conveyors, and Z-conveyors. In addition, we manufacture loading bunkers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers—all tailored to meet our customers’ specific requirements. We understand that every industry and every project is unique, which is why we tailor our solutions precisely to your needs and specifications. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. With us, there are no off-the-shelf solutions—every problem gets the right answer! Challenge us! Contact us and discover how we can turn your requirements into custom solutions. Together, we will shape the future of your production processes!

Condition: new, Year of construction: 2026, Aluminum incline conveyor with substructure including leveling feet and machine feet for compensating uneven floors Rjdpfx Aoyhzhbslcecf - Feed height: 500 mm - Inclined section: 2,000 mm - Discharge height: 1,200 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Continuous removal plate 2.0 mm galvanized Drive roller + return roller made from S235 steel, welded and machined Ø150x620 mm crowned, shaft fixed with pillow block bearings. Drive: Mounted gear motor 1.10 kW, belt speed 0.77 m/sec Connection 230/400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be carried out by qualified electrical personnel) PVC conveyor belt DM 10/2 0+005 PVC green Belt width: 600 mm endless high-frequency welded with stepped joint Belt material: 2-ply, especially cross-stable 2 pcs wave edge profiles, 80 mm high, 50 mm wide, high-frequency welded flush with the belt edge 14 pcs T60 cleats, 400 mm long, pitch approx. 296 mm, center-mounted Belt material: 2-ply, especially cross-stable Due to the wave profiles on both sides, the usable belt width is reduced: Usable width 500 mm, calculated as follows: (Top view) Crosswise arrangement 50+500+50 mm

Condition: new, Year of construction: 2026, Aluminum angled conveyor with substructure Including adjustable feet as well as machine feet for leveling uneven surfaces Horizontal section: 3,500 mm Inclined section: 2,100 mm Inclination angle at bend: 45° Total conveyor length measured on the floor: 5,000 mm Discharge height: 2,000 mm Height of horizontal section: 500 mm Design: Aluminum structural construction - Triple-reinforced profile 135x45 mm - Full-surface discharge sheet 2.0 mm, galvanized Drive drum + tail drum made from S235 steel, welded and machined Ø150x820 mm, crowned, shaft mounted in plummer blocks. Drive: Shaft-mounted gear motor 1.1 kW, belt speed 0.77 m/sec Rodpfx Aeyhzhuelcecf Connection 230/400V, 50Hz, protection class IP54 Drive prewired to motor terminal box (Commissioning must be performed by qualified electricians) PVC conveyor belt DM 15/4 0+007 PVC including PVC wave edge, green Belt width: 800 mm 2 pcs. wave edges, 80 mm high, 50 mm wide, high-frequency welded 32 pcs. T-50 cleats, approx. 355 mm spacing Belt material: 2-ply, especially cross-stable At the bend, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on each side. Due to the wave edge on both sides, the usable belt width is reduced: Usable width: 490 mm, calculated as follows: (top view) transverse arrangement 100+50+5+490+5+50+100 mm Discover custom solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailored solutions for the recycling, food, and processing industries. Our extensive product portfolio ranges from conveyor systems and flat conveyors to incline conveyors, angled conveyors, and Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnetic separators, drum magnetic separators, and dosing bunkers – all according to our customers’ specific requirements. We understand that every industry and project is unique. That’s why we customize our solutions to your individual needs and specifications. Complex projects are an exciting challenge for us, and we look forward to working with you to develop innovative solutions. With us, there is no such thing as a special solution – we find the right solution for every problem! Challenge us! Contact us and discover how we can transform your requirements into customized solutions. Together, we will shape the future of your production processes! Conveyor, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grate, metal separator, block magnet, filter systems, dosing bunker, feed bunker, filling systems

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums - Including magnet-free zone in the area of the overbelt magnet separator Rcodpfx Aloyhzhzjcsf - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Rcodoh Ellzopfx Alcjf Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Redpfx Aei Igdfjlcocf Gear motor: 0.37KW We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: used, Alignment and welding plate, cast steel – grey cast iron, heavily ribbed formerly a layout plate and measuring plate heavy-duty alignment plate Length: 1000 mm Width: 800 mm Thickness: 250 mm Working height: 820 mm Plate thickness: 30 mm, continuous - height-adjustable metal substructure Weight: approx. 400 kg Surface: rusted Rcsdpfx Aodzqrpelcef

Condition: used, Straightening and welding plate, steel and grey cast iron, heavily ribbed Heavy-duty straightening plate Length: 2000 mm Width: 1500 mm Thickness: 125 mm Plate thickness: approx. 40 mm throughout Table height: 880 mm Rcodpfsqylk Usx Alcof - Table substructure made of steel (custom-made) Weight: 1700 kg Good condition

Condition: used, Straightening and welding plate, cast steel, gray cast iron, heavily ribbed formerly used as a layout plate and measuring plate heavy-duty straightening plate Length: 1000 mm Width: 1000 mm Thickness: 230 mm Rcjdpfx Aljdzqr Aocsf Working height: 970 mm Plate thickness: 38 mm, continuous - Metal substructure Weight: 450 kg

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Rodpfx Aljhh Ay Sececf Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet 1500mm flat Dimensions: approx. 1500 x 500 x 105mm Aluminum construction: Redpfxogggkpe Alcecf Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Year of construction: 2018, condition: excellent (used), Aluminum riser conveyor incl. Substructure Dim: 4000 x 460 x 1000 / 1700mm Construction: height adjustable Conveyor belt width 400mm Rcjdod Dza Ajpfx Alcef PVC conveyor belt incl. Driver and wave edge (NEW) Construction for suspension of the overband magnetic separator. Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55 * incl. new bearings, new conveyor belt