Please refer to the pictures for the technical data.
The machine has been technically checked, is in good condition and is ready for use.
With hose package, but without ground cable.
An inspection is possible at any time by appointment.
Bovvh8zmu8
For sale is an electric hand welding machine:
- voltage: 230 - 550 V
- 3 phases
- frequency: 50/60 Hz
- protection class: IP 23
- dimensions (W x H x L): 800 x 780 x 1310 mm
- weight: 223 kg
- 4 pieces available
On9gr
Submerged arc welding machine, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding chassis, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding machine, longitudinal seam welding machine, longitudinal seam welding machine, longitudinal seam welding machine, rail runner
-Sub-powder welding machine without power source
-Submerged arc welder type Minisaf 02
-Control box SUBARC 3
-Between hose package
Ls93ara2
-Equipment
-Dime...
- welding current 5 A 20 V -200 A 28 V
- Mains voltage 1x220/380 V
- Connection cable with CEE plug 16 A
- Ground cable with clamping pliers
Nomqv
- Cable with diode pliers
- Dimensions 27x32x63 cm
- Weight 45 kg
- Operating Instructions
Further data and notes correspond to the attached data sheet
range of control current flow: 25 - 190 A
range of control alternating flow: 25 - 190 A
current flow 60% ED: 190 A
current flow 100% ED: 160 A
alternating flow 60% ED: 170 A
alternating flow 100%ED: 160 A
space needed: 1200 x 600 x 800 mm
weight: 300 kg
Vrfwq3
Machine type Pulse-Arc inverter welding system
Make MERKLE
Type PU 250 K
Annex no. 38.789
Supply voltage 3 x 400 Volt
Adjustment range 10 - 250 amps
Duty cycle 40 % duty cycle at 250 amps
60 % duty cycle at 220 amps
100 % duty cycle at 200 amps
Current setting infinitely variable
Cooling inverter through built-in fan
Cooling Burner gas-cooled
Execution portable compact unit
Wire feeder 4-roll drive DV 25
Fuse protection 16 Ampere
Dimensions L x W x H 610 x 310 x 570 mm
Weight 33 kg
Age...
Submerged arc welding machine, welding accessories, forming gas welding device, longitudinal carriage, chassis, welding chassis, longitudinal carriage, automatic welding machine, welding carriage, inert gas welding machine, longitudinal seam welding machine, longitudinal seam welding machine, longitudinal seam welder, rail runner
-Submerged arc welding machinet for plating applications (corrosion protection)
-Submerged arc welding machine without power source
-Submerged arc welder type 60 ES...
range of control: 270 A
max. welding circuit 60% ED: 270 A
Fpjtap
max. welding circuit 100% ED: 210 A
electrical connection: 230 u. 400 V kW
space needed: 420 x 100 x 850 mm
weight: 80 kg
range of control: bis 280 A
max. welding circuit 60% ED: 240 A
Xxgjag0m
max. welding circuit 100% ED: 185 A
electrical connection: 400 V, 10,7 kVA kW
space needed: 450 x 900 x 730 mm
weight: 110 kg
range of control: 20 - 280 A
max. welding circuit 60% ED: 230 A
max. welding circuit 100% ED: 175 A
electrical connection: 400 V, 12 kVA kW
Od9h8l7
space needed: 550 x 1100 x 910 mm
weight: 157 kg
M 350 BASIC inverter technology enables users to mig i (MIGA) covered electrodes (MMA) and TIG welding n an air-cooled inverter machine with the ability to do welding on a single machine.
Thanks to the digital display and the user-friendly front panel, the welder can set the wire speed, voltage and current values.
Adjustable properties for front gas, hot start, tail gas, crater filling and burn-back improve the appearance of the weld seam and the welding performance.
37 mm wire coil, encoder mot...
A company with many years of experience offers for sale.
Newarc R50000 CCV inverter semi-automatic welding machine Liquid cooled.
Welding current 400A 100%
20M control cables
Plemv2w9
Technical condition 100% operational + complete set of documents
We have 9 pieces
Welding machines to be viewed and tested in our company.
It is possible to send the welding machine.
M 500 W PULS inverter welding machine
Synergetic / impulse function
XPulse, XRoot, XForce and XCold functions
Special programs for steel / CrNi / aluminum / copper resources
2T-4T function
LIFT-TIG function
Digital display and user-friendly front panel
Front gas, hot start, newest gas, crater filling and back-burning properties
37 mm wire slide roller, encoder motor and 4 × 4 wire slide unit
100 program memories
Mains voltage (VAC)
400 ± 10%
Amp area (A)
20-500
Downtime
60%: 500 A...
1552/5000
• The KS 270 inverter power supply unit offers perfect seams with rutile diameters of 2.50 mm, 3.25 mm and 4.00 mm and in particular electrodes with a basic character without welding. • It is designed for use in iron carpentry, repair, maintenance, installation, installation and in external welding. It is the smallest and lightest welding machine. • With its digital current display, precise current setting and shoulder strap, it offers the welder easy transport and ergonomic use. • Tha...
Kemppi Minarc Tig Evo 200
200 Ampere
230 Volt
2/4 Stroke
Gas post flow
Gas pre flow
Down slope
Upslope
High frequency start
Digital display
Stick option
Including a 8 meter welding gun and mass cable
Price €1150,- VAT not refundable.
Or0j7
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and plasma.
And also other brands: Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Helvi, Lorch, ...
Inverter welder for manual electric welding OERLIKON type Citoarc 3500i CC/CV
fabric. no. 153210-339 year of construction 2009
Power 350 Amp. = 35% ED
270 Amp. = 60% ED
240 Amp. = 100 % ED
Adjustment range 5-350 Amp. infinitely variable
Mains connection 400 Volt, 50 Hz, 28,5 Amp.
- equipped with 32 Amp. CEE plug
- Hot-start function adjustable
- Integrated anti-stick function
- Arc-Force function adjustable
- Digital display
- Socket for remote control connection
- Ground cable with plug...
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine
V3yanz
-Manufacturer: ESS, TIG and hand electrode welding machine, water-cooled
-Type: THYROARC 3 AC/ DC direct / alternating current
-incl .: earth cable, gas valve, hose package 7500 mm long
-Welding power: max. 280 A, see nameplate
-Dimension: 1300/570 / H900 mm
-Weight: 262 kg
- WIG welding machine and welding machine
- ESS - THYROARC 32 No. 08820181
- welding programms:
-- coated electrodes
-- WIG 2-times
-- WIG 4-times
-- WIG-periods
-- pulsen
-- time value
Xfdkhjkx
Offered from insolvency, a tested pulse welding device
Manufacturer ESS
Model Pulsearc 350
Built in 2003
No.0703248
Welding area 40-350Ampere
350amps at 60% ED
300amps at 100% ED
Watercooling
4-roller wire feed
Wire feed case DVK 100 with about 20 meters of intermediate hose package
State
The device has been extensively tested, no technical defects have been detected
Brd3ug8k
The sheathing of the 20meter intermediate hose package is damaged in some places
Accessories
4meter burner pack
Mas...
Electrodes welding machine
Eqbl3sd
Manufacturer: Kemppi (Finland)
Performance: 5-300 amp
semi-automatic electrodes welding machine
Welding gun (length approx. 4,000 mm)
Ground cable
Connection cable 5 pin 32 amp
TIG welding machine Fabr. ESS type Uniarc 5
Masch.# 0290650 built in 1990
Technical data:
maximum power 210 A
Bad3iitj3d
ED 210-A 35%
ED 160A 60%
ED 130 A 100%
External dimensions approx. 600 x 900 x 850 mm
with
-Mobile
-5,0 m hose package with TIG torch
-Ground cable with clamp
-Gas hose with pressure gauge
-Foot remote control
used, ready
AC/DC ESS Squarearc 506 welding machine
Manufacturer: ESS Schweißtechnik GmbH
Type: Squarearc 506
Year of manufacture: 2007
Bdhvj02rsg
Mains voltage: 400 - 3ph
Fuse slow blow: T35
Welding current: 5-500A
Open circuit voltage: 100
Duty cycle: 60% - 500 A
100% - 430
Burner cooling: liquid cooled
Weight: 130 kg
Dimensions (mm): (L x W x H) 950 x 435 x 980
Digital volt / ampere display: Series
Machine type MIG/MAG welding machine
Make Hermann
Type SHARC 620 M
Serial no.: 27 M - 134
Supply voltage 3 x 400 Volt
Adjustment range 80 - 620 amps
Duty cycle 60 % duty cycle at 620 amps
100 % duty cycle at 495 amps
Current setting infinitely variable
Transformer cooling by built-in fan
Cooling Water-cooled burner
Execution mobile industrial plant
with separate DV-case
Wire feed gear 4-roller drive
Fuse protection 63 amps
Dimensions L x W x H 1,070 x 700 x 1,550 mm
Weight 550 kg
Age 11 years...
fully operational
Bku2a7ds7c
Manufacturer ESS
Model Pulsearc 350
Built in 2003
No.0703250
Bewhksrvr3
Welding area 40-350Ampere
350amps at 60% ED
300amps at 100% ED
Watercooling
4-roller wire feed
Wire feed case DVK 100 with about 20 meters of intermediate hose package
State
The device has been extensively tested, no technical defects have been detected
The sheathing of the 20meter intermediate hose package is damaged in some places
The housing of the power source is warped (see photo)
Accessories
4meter burner pack
Mass...
TIG welding unit AC/DC
Manufacturer ESS
Model Squarearc 456
Year of manufacture 2000
Machine no. 0400168
Technical data:
380 volts
Welding range 5-450Amps
Welding power:
450Amps at 60% ED
400Amps at 100% ED
Bmnwn00uz9
2/4 beat
Pulse function
Water cooling
Alu+ Steel
approx. 22 meter burner package
without ground cable and pressure reducer
+Remote control FS 200
Dimensions in mm approx. 950x440x900
From a company liquidation
TIG welder
Bhx9b0cyuz
DC area
Manufacturer EWM
Model Tetrix 421 Comfort Activarc
Year of manufacture 2009
Machine no. 0000224090
Technical data:
Welding range 5-420Ampere
Power:
420Amps at 60% duty cycle
360Ampere at 100% duty cycle
Pulse function
HF ignition
SpotArc Function
2/4 beat
Water cooling
8meter burner package
complete with ground cable and pressure reducer
Dimensions in mm approx. 950x460x1100
Manufacturer ESSModel Squarearc 231Baujahr 2010Masch.Nr.04100040Technical Data:380 VoltSchweissbereich 3-225AmpereSchweissfleistung:225Ampere bei 40D140Ampere bei 100D2/4 TaktPulssfunktionWasserkühlungAlu Stahl8meter Torch package with ground cable and pressure reducerDimensions in mm approx. 710x400x850
2rjxiq
The machine is currently being installed and recommissioned
Btipkawa
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Diameter bucket top 285 mm
Noyit
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!!
Technical DataPayload: 0/20 KgArm reach: 1.88 mmNumber of Axis: 6Repeatability: 0.08 mmRobot weight: 250 KgMounting: FloorTechnical Data:
• Payload: 20 Kg.
• Arm Reach: 1881 mm.
Bi7geajkzl
• Repeatability: 0,08 mm.
• Controller: R3OiA.
Axis motion speed:
• Axis 1: 195º/s
• Axis 2: 175º/s
• Axis 3: 180º/s
• Axis 4: 360º/s
• Axis 5: 360º/s
• Axis 6: 550º/s
Applications
Laser welding Nd-Yag
Spot-welding
Arc Welding
Technic...
cutting circuit: bis 400 A
2yjlvbwe
space needed: 820 x 1220 x 930 mm
weight: 750 kg
SIRIUS automatic welding and cleaning centre (3 axes)
The centre is designed to weld and ring the four corners of PVC profiles
- minimum frame size 350x400mm - welding and cleaning
- maximum frame size 2540x4000m - welding and cleaning
- Welding and cleaning min size of the profile:
30mm height, 30mm width
- welding and cleaning maximum profile dimension:
200mm height, 150mm width
- welding seam thickness 0.2mm
- pneumatic operation
- automatic frame rotation
- large work programming memory
- s...
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
Muvqww
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
STANDARD EQUIPMENT:
⦁ Right and le...
Length: mm
height: mm
welding current - continuous: A
Bfucshkkxe
welding current: 330A / 60% und 250A / 100%
protection class: IP23
total power requirement: kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,6 x 0,9 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optional possible!
Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources
-Three-phase rectifiers: for MMA DC welding
-Welding performance: max. 375 A
-Welding cable: with electrode clamp
-Ground cable
-Weight: 210 kg
Ch2ae00s
current capacity 25 kVA
number of controlled axis 6
workpiece weight 10 kg
weight of the machine ca. 1,55 t
Cfs97rj
dimensions of the machine ca. 2,2 x 1,4 x 2,14 m
We offer our Polysoude TIG hot wire welding system for sale.
Ye2ro
It has an AVC control (automatic arc control) and an endlessly rotating welding head! This enables welding without the components having to rotate. It is a standard burner for e.g. sealing surfaces on flanges and 2 welding lances to weld on pipes in the inner diameter or outer diameter. The power source is 600A. The control has a pendulum function. The system is delivered ready for welding with all connecting and connecting cable...
The robotic welding station Fanuc ARC Mate 120iC was manufactured in 2010. The complete welding cell is equipped with a 3000mm diameter swivel rotary table (turntable) and a Fanuc ARC Mate 120iC welding robot. Source type: Fronius Transpuls Synergic 5000.
Swivel rotary table:
- maximum load: 10t
- maximum diameter of the rotary table: 3000mm
- maximum diameter of the welded detail: 3500mm (vertical)
Welding robot Fanuc ARC Mate 120iC:
- number of axles: 6
- load capacity: 20 kg
Clrzyi7
- reach...
Length: mm
height: mm
welding current - continuous: A
welding current: 330A / 50% bis 210A / 100%
protection class: IP23
total power requirement: 13,8 kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,60 x 0,90 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
Biegy9cs2g
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optional possible!
Stud welding unit
-Maximum current consumption 58 A
-without gun
-Robust housing
Ebfkk3j
-for threaded bolts max 20 mm
-Dimensions 870/430/H880 mm
-Weight 120 kg
gebr. 6-axes welding robot
Cg7i22m8
Make FANUC
Model ARC Mate 50 iB-3L
Year of manufacture 2003
With FANUC R-J3iB Mate control
Max. Load capacity 3 kg
Max. Range 856 mm
Range of motion:
A 1 320°
A 2 185°
A 3 290°
A 4 380°
A 5 240°
A 6 720°
External dimensions with cell:
width 1100 mm
depth 2600 mm
Height 2150 mm
With:
Robot welding cell
Turntable 1200 mm Ø
Length: mm
height: mm
Bh7uxs9pc
welding current - continuous: A
welding current: 330A / 50% und 210A / 100%
protection class: IP 23
total power requirement: 13,8 kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,60 x 0,90 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optinal possible!
Technical data:
GLC 556-C
Entrance:
Rated input voltage 3x400V AC
Rated frequency 50Hz
(Other voltages and 60 Hz frequency are available on request)
Input - peak current 58A
Input - continuous current 38A
Slow fuse 50A
Power cable 4x10mm2
Input constant power 26.3 kVA
Power factor cos Phi 0.80
Output:
Rrtebpm
Max idle voltage 22-70V
Welding range for MIG / MAG 80A/18V-550A41.5V
Switch-on time 100% 425A/35V
Switch-on time 60% (10min.) 550A/41.5V
Type of protection IP 23
Cooling type F
Insulation ...
current intensivity 400 A
Beomwfwhi3
length 1200 mm
height 1800 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller
-Remote control
-Manufacturer: unknown
-Type: Poti
S0yeylzej
-Number: 1x controls available
-Price: per piece
-Dimensions: 155/105/H130 mm
-Weight: 2.7 kg