MIG/MAG welding machine 350 A

ESS Pulsarc 350

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. Nkjdpfx Ahjdzwwnezst -Air cooled -Incl. Ground cable -Gas valve -Dimensions: 370/720/H870 mm -Weight: 52 kg

Year of construction: 2018, condition: ready for operation (used), 5 identical welding machines are available. Mains voltage: 400V 50/60Hz, fuse: 25A, power consumption: 22kVA, cos phi: 0.8, setting range: 40-400A, working voltage: 16-34V, open circuit voltage: 19-55V, voltage steps: 2x12. Duty cycle at 40°C: 60 percent at 360A 32V, 100 percent at 250A 26.5V. Protection class: IP23, insulation class: H 180°C, cooling type: F. Weight gas cooled: 153kg, water cooled: 161kg. Length: 1040mm, width: 460mm, height: 935mm. Two coarse steps, 12 fine steps, high performance 4 roll wire feeder 140W, feeding speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 choke outputs for adjustment to the welding task. Control MC 15 as a compact easily exchangeable control box. Functions: wire feed speed constant control, wire creep, burn back time, 2 stroke and 4 stroke, wire inching without current and gas, low noise fan thermostat controlled for gas cooled units, thermal overload protection, central connection socket for welding torch. An on-site inspection is possible. Nodpfexdda Hex Ahzokt

Condition: ready for operation (used), There are ten Industrial Robots ABB IRB 6400 und four ABB IRB 4600 available. Nksdpfjq Ewi Rex Ahzet

Condition: as good as new (ex-display), Year of construction: 2017, ## KUKA KR10 R1100 sixx Here’s a detailed description of the KUKA KR10 R1100 sixx robot arm, including its key specifications, features, typical applications, and things to consider. ### Key Specifications Here are the core technical specs for the KR10 R1100 sixx: * Number of axes: 6. * Maximum reach: ~ 1,100 mm (often quoted as 1100 mm or 1101 mm) to the wrist. * Maximum payload: Up to 10 kg is often cited (depending on centre of gravity and tooling) for the version. * Note: Some sources say the robot is designed for a rated payload of 5 kg to optimise dynamics, but supports up to 10 kg under specific conditions. * Repeatability (pose accuracy): ±0.03 mm. * Robot weight (manipulator alone): ~ 54–55 kg (varies with configuration) according to listings. * Protection rating (wrist or robot): IP54 for typical version. * Mounting options: The robot supports flexible mounting – floor, ceiling, wall mounting are possible. * Controller: Typically paired with the KRC4 compact (or other KUKA small-robot controller versions) in this line. ### Features & Strengths * High dynamics: With a relatively light arm, modest reach (for an industrial robot), and good payload margin, this robot is engineered for fast cycle times and responsiveness. ([KUKA][4]) * Precision: The repeatability of ±0.03 mm means it can be used for tasks that require good accuracy. * Flexible integration: Given its compact size and good reach/payload for that size, it can be mounted in many ways (floor, ceiling, wall), which helps for tight or unconventional spaces. * Tooling & payload flexibility: While nominal payload is up to ~10 kg, the real effective payload will depend on tool centre of gravity (TCG), additional mass, inertial loads, etc. The manufacturer emphasises verifying for specific load cases. * Robust build & industrial readiness: KUKA’s “Agilus/sixx” line (of which this model is part) is meant for high‐speed, small to medium payload automation in manufacturing. Typical Applications Given its specs, the KR10 R1100 sixx is well‐suited for tasks such as: * Material handling of smaller to moderate parts (up to ~10 kg) with reach ~1.1 m. * Machine loading/unloading, especially for press or injection‐moulding machines, where speed and compactness matter. * Assembly tasks where both reach and accuracy are required. Nkodpfx Ahewdq Uaozot * Pick & place operations, packaging, palletising (within its payload range). * Situations where the robot needs to be mounted overhead or at an angle (ceiling or wall) due to space constraints. The KUKA KR10 R1100 sixx is a capable 6-axis robotic arm offering roughly 10 kg maximum payload (subject to conditions) and about 1.1 m reach, built for high speed and accuracy in a relatively compact form. It’s well suited for medium-duty tasks in manufacturing automation where flexibility, precision, and compact installation are required.

Condition: new, welding current 5 - 160 A connected load frequency 230 V weight 7,9 kg Dimensions (LxWxH) 310 x 140 x 230 mm ESAB inverter TIG welding machine Rogue ET 180i CE TIG DC An excellent high-frequency TIG ignition ensures a faultless welding start, as well as even and stable arc properties. Easy to use - setting up the welding parameters is simple and intuitive. Robust design IP23S housing for applications in production plants and on construction sites. Comprehensive TIG functions for optimal process control for every application and a pulse function of up to 500Hz to control the ideal heat input. A PFC module ensures a stable arc and insensitivity to mains fluctuations - even when working with long extension cables of up to 100 meters (PRO version only). Optionally, the welding current can be set from the TIG torch, foot pedal or hand-held remote control. technical data: Primary voltage, 1-phase 230 VAC ±15%, 1 Ph, 50/60 Hz Njdsvkiwbopfx Ahzekt Maximum welding current 180 A Nominal apparent power in kVA 8 kVA Energy saving mode 30 W Open circuit voltage 63 V DC MMA - max. load at 20% duty cycle 170 A/26.8 V at 60% duty cycle 97 A/23.9 V at 100% duty cycle 75 A/23.0 V TIG - max. load at 25% duty cycle 180 A/17.2 V at 60% duty cycle 116 A/14.6 V at 100% duty cycle 90 A/13.6 V Current range 10-180 A Operating temperature -10 to +40 °C Housing protection class IP23S Test mark CE Dimensions, L x W x H 403 x 153 x 264 mm Weight 8.7 kg Scope of delivery: Shoulder strap, 4 m TIG torch type SR-B 26, a wear part set, including tungsten electrode 2.4 mm and 3 m workpiece cable with clamp

Condition: new, Year of construction: 2024, functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp Nkodpfsug Up Nsx Ahzst The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: new, Year of construction: 2024, functionality: fully functional, type of input current: three-phase, total height: 690 mm, total width: 325 mm, total length: 890 mm, input voltage: 400 V, ground cable length: 3,000 mm, overall weight: 42 kg, warranty duration: 24 months, welding current at 60% duty cycle: 250 A, hello , we are the belgian importer of the Stayer range , we have a large stock of this item possible quantity price per 1 pc - 1800 € htva/pc per 3 pcs - 1440 € vat/pc per 10 pcs - 1080 € vat/pc Synergic MIG-MAG welding equipment, coated electrode and Spot. - Easy polarity reversal for hollow wire (flux core). - Two high-brightness displays for simultaneous monitoring of current and voltage with true real-time values. - Manufactured to strict European specifications 2014/35/EU, 2014/30/EU and 2011/65/EU and IEC 60974. - Suitable for 3x400 generators. Capable of handling ±17% voltage variations. - Professional wire feeder, with 60W motor, safe and stable transmission, suitable for large spools up to 15 Kg. Includes thread rollers grooves for 0.6 mm, 0.8 mm and 1 mm. Power rating 250 A Voltage 230 / 400 V Duty cycle 60 Coated electrodes 1.6 - 6.0 mm Wire thickness 0.6 - 0.8 - 1.0 mm Coil weight 5 - 15 kg For use with 12 KVA / 230V ±17% generator Dimensions 89 x 69 x 32.5 cm Nksdpfx Ahjuh A U Aezet Weight 42 kg DINSE terminal 1/2" (35 - 50) ø 2m x 2.5 mm² power cable Cable + earth clamp 3m - 25 mm² Cable + electrode clamp 3m - 25 mm² MIG torch 25 AK Gas hose 3 m x2 (0.8 - 1.0) mm

Condition: like new (used), 44090006 Sub Spindle Assy e.g. f. LICO Spare part condition: - unused Warranty: - no Payment conditions: - payment in advance Delivery: Nksdpsv Au Uvofx Ahzot - packed in wooden box - ex Works - excl. delivery cost Btjuyhmzpc #Work spindle #Turning spindle #Counter spindle