Used Asg 30 for sale (25,079)

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes Lsdpfx Anszyy Rmexehl - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: used, Year of construction: 2018, operating hours: 8,563 h, functionality: fully functional, WEILER E 30 X 750 Cycle Turning Machine (2018) Manufacturer: WEILER Type: E 30 X 750 Cycle Turning Machine Year of manufacture: 2018 Condition: Used Ledpfx Anszy Sr Nsxohl Operating hours: 8563 h

Condition: like new (used), Year of construction: 2022, controller model: Siemens Touch Panel KTP 600, bending angle (max.): 180 °, bending radius (max.): 200 mm, overall weight: 500 kg, power: 1.5 kW (2.04 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending direction: right Tube diameter steel: 4–28 × 3 mm Tube diameter non-ferrous metals: 4–35 × 2 mm Bending radius: max. 200 mm Bending height: 25 mm Bending speed: up to 45 °/s Effective bending angle: up to 180° + 10° overbending Switch-off accuracy: 0.1° Tube feed length: 1,500 mm MACHINE DETAILS Control: electronic Control model: Siemens Touch Panel KTP 600 Bending axis: electronically controlled Bending angle switching: automatic Program memory: 100 programs with 20 data sets each Target/actual value display for bending angle Tube clamping: hydraulic Clamping pressure: adjustable Lhsdpfx Anezzlc Rexel Slide block positioning: hydraulic Bending mandrel retraction: hydraulic Pump type: HD gear pump Pump capacity: 4.5 l/min Hydraulic pressure: 180 bar Bending head: free-standing Control panel: swiveling Machine design: mobile Maximum sound level: approx. 78 dB(A) Drive type: electro-hydraulic Drive power: 1.5 kW Mains voltage: 400 V Frequency: 50 Hz Phases: 3 Control voltage: 24 V DC Electrical standard: VDE Protection class: IP54 Dimensions & Weight Dimensions (L x W x H): 2,200 x 600 x 1,100 mm Weight: 475 kg EQUIPMENT Siemens Touch Panel KTP 600 Function keys with plain text display for operator guidance Automatic bending angle switching Target/actual value display for bending angle Swiveling control panel Free-standing bending head Hydraulic tube clamping with adjustable clamping pressure Hydraulic slide block positioning Hydraulic bending mandrel retraction Mobile machine design The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data is based on the original offer. No guarantee is given for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 13,137 h, load capacity: 3,000 kg, lifting height: 6,455 mm, free lift: 2,074 mm, fuel type: gas, mast type: triplex, construction height: 2,841 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Treibgas, Internal combustion engine forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic / 2-pedal Condition: Ready for use and fully functional Technical condition: good Ljdoz Ecvgopfx Anxehl Front tire type: Superelastic Front tire size: 7.00-12 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 23x9-10 Rear tire condition: 80 - 100% Description: Delivery includes a new FEM 4.004 inspection certificate. If you have any further questions, please call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We would be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible, even if you do not purchase a device from us. The stated operating hours were recorded at the time the listing was created. Subject to prior sale, changes and errors. Side shifter, pre-installed side shifter 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light, seat heating.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. Lhsdezcyrwopfx Anxel The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit.

Condition: ready for operation (used), Year of construction: 1982, machine/vehicle number: 10710, functionality: fully functional, HYDRAULIC PRESS BRAKE LVD PPN 300/30 Year of manufacture: 1982 Serial number: 16270 TECHNICAL SPECIFICATIONS Maximum capacity: 3000 kN Working length: 3000 mm Distance between uprights: 2550 mm Ram stroke: 250 mm Maximum distance between ram and table: 500 mm Gap: 300 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 8.8 mm/s Return speed: 96 mm/s Main engine: 22 kW Lodezzxgcopfx Anxohl Weight: 16000 kg NC controller: ELGO X-Y  Solid back gauge with range on X axis: 600 mm  2 fingers on back gauge  2 front supports of 1000 mm TOOLING: a. Multi-V M130, Length: 3050 mm b. Toolholder LVD Classic 15 to LVD Classic 15, Length: 3050 mm c. Straight top tool R15 H130 86°, Length: 3050 mm d. Gooseneck top tool D15 H130 86°, Length: 3050 mm e. Straight top tool R15 H130 26°, Length: 3050 mm

Condition: excellent (used), Year of construction: 2021, TMUA VR30 Belt Grinder, variable speed. Year: 2021. The WR can be used for deburring, edge rounding, brushing, superfishing, or manual polishing of parts made of any material and of any shape. The motor and unit assembly can optionally be mounted on a reinforced sheet metal base. The working units are adjustable around the motor shaft, and the housings are equipped with a Ø 120mm suction nozzle. Motor specifications: WR30: 2.2 Kw – 3000 rpm – 220/380v three-phase power supply. Control box: Variable speed drive in an enclosure with a potentiometer, emergency stop, and push button. Lhsdpfx Aney U N A Rexel

Condition: good (used), mileage: 906,455 km, power: 341 kW (463.63 HP), first registration: 09/2012, fuel type: diesel, tire size: 445 / 65 / R22.5, axle configuration: 8x6, wheelbase: 6,150 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,760 mm, total width: 2,550 mm, total height: 3,700 mm, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2012, Equipment: ABS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, power mirror, spoiler, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 12.902 cc Transmission Transmission: ZF, 16 gears, Automatic Axle configuration Make axles: Ginaf Brakes: drum brakes Front axle: Tyre size: 445 / 65 / R22.5; Max. axle load: 10000 kg; Steering; Tyre profile left: 75%; Tyre profile right: 75%; Suspension: leaf suspension Rear axle 1: Tyre size: 445 / 65 / R22.5; Differential lock; Lift axle; Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 2: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Rear axle 3: Tyre size: 13 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: hub reduction; Suspension: hydraulic suspension Weights Empty weight: 15.815 kg Carrying capacity: 27.185 kg GVW: 43.000 kg Functional Crane: VDL S-30-6600, year of manufacture 2012, behind the cab Interior Interior: grey Condition Technical condition: good Visual appearance: good Number of keys: 2 Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Air horn - Armrest - Coupling - Heavy duty engine brake - Hydraulic - Low-noise - Power take-off (PTO) - Radio, MP3 enabled - Radio/CD player - Remote central locking - Reversing camera Lsdpfoz Dr Rwex Anxjhl - Speed limiter - Spoilers - Stability control - Toolbox - Visor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, measuring range X-axis: 2,000 mm, measuring range Y-axis: 3,000 mm, measuring range Z-axis: 1,500 mm, Zeiss Accura II - measuring range 2000x3000x1500 mm - RDS with XXT ( possible additionally LineScan) - C99 - pneumatic damping system - laser safety system installed Lhjdpfx Aozpzp Nsnxjl - compressed air drying system included - probe changer, callibration sphere, aluminiumi threaded plate included - latest Calypso basic CNC - installation and callibration included (ILAC possible)

Condition: good (used), Year of construction: 2004, Universal machining center: Fahrständer / travelling-column Machine type: Matec 30 HV Control: Siemens 840 D Sinumerik Year: 2004 SPECIFICATIONS Travel X-Axis: 2.000 (2 x 750) mm Y-Axis: 600 mm Z-Axis: 800 mm B-Axes: +/- 105° C-Axis Lhedpfoz Dkr Tox Anxjl Spindle speeds: 15.000 rpm Spindle power: 15 kW Torque: 100 Nm Tool: HSK 63 Tool capacity: 48 NC rotary table: RW/NC-160/250 Equipment Internal cooling: 20 bar cooling system Chip conveyor Caliper separating plate Direct linear scales

Condition: excellent (used), Year of construction: 2011, ABB IRB260-30/1.5 – robot only, 20% discount when ordering more than one robot. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Lsdpfx Aezxbnqjnxehl

Condition: used, mileage: 224,000 km, power: 96 kW (130.52 HP), first registration: 11/2020, fuel type: diesel, overall weight: 3,400 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,825 mm, loading space width: 1,230 mm, loading space height: 1,210 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Docking station (MyFord Dock), vehicle without vinyl flooring in load/passenger compartment, 240 A alternator, LED cargo area lighting, smoker's package, sliding door on the left side of the load/passenger compartment, start-stop system, AGM battery 80 Ah (2 batteries) Additional equipment: Driver's airbag, traction control system (ASR), audio system: radio with USB and Bluetooth hands-free system, integrated indicator in exterior mirrors, on-board computer, entry lights, electronic brake-force distribution (EBD), electronic traction control, driver assistance system: hill start assist, driver assistance system: side wind assist, lockable glove compartment, rear wing doors without glazing (180-degree opening angle), interior pollen filter, body type: high-roof panel van, body variant: medium-height roof, high load compartment partition behind driver and passenger, without window but with lower through-loading option, steering column (steering wheel) adjustable for height and reach, truck registration, model update, engine 2.0 L - 96 kW TDCi CAT, parking assistance system, front and rear parking sensors, wheelbase 3300 mm, spare wheel with road tires, low emissions according to Euro 6d-TEMP standard, gear selector/shift knob in leather, windshield wipers with interval control, adjustable, H4 headlights, sliding door right side of load/passenger compartment, mud flaps front and rear, Visibility Package 2, Seat Package 13: driver's seat (4-way adjustable) - passenger double seat, fabric, Seat Package 25: driver's seat (4-way adjustable) - passenger double seat - in velour, steel rims 6.5x16, partly painted bumpers, Style color package, LED daytime running lights, Trend, tinted glazing, half-height trim in load/passenger compartment, side lashing rails in load compartment, lashing points (8), slightly tinted heat protection glazing Cooling system: Special equipment: For pharmaceutical transport (PHARMATRANSPORT) Transcool Multi-temperature system With 3 compartments: -30°C, +22°C, +4°C Standby cooling 220V Payload: 700 kg Vehicle is in good condition! This is a take-away price without TÜV (technical inspection). Lhedjz D Hd Eopfx Anxsl

Condition: good (used), Year of construction: 2010, total height: 765 mm, total width: 765 mm, total length: 2,790 mm, overall weight: 3,000 kg, set 1 (5 x in stock)  Driven Master unit CD-30 set 1 (5 x in stock) Idler Slave unit CI-30  Load capacity drive 15 ton Load capacity idler 15 ton Turning capacity combi 45 ton turning speed 130 - 1300 mm/Min Wheel size diameter 520 mm Wheel size width 176 mm Load capacity per section:15T Vessel range Minimum: 466 Vessel range Maximum: 6300Ø Variable rotation: yesRpm No of wheels per section:2+2 Wheel dimensions: 570 x 176Ø x mm Number of matching pieces:5 Length: 2790mm Width: 765mm Height: 765mm Weight: 3000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lhodpfx Anozw Hnmoxol

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute Ledpszd Hb Hefx Anxshl - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: used, axle configuration: 3 axles, first registration: 02/1984, color: other, Year of construction: 1984, Empty weight: 6.080 kg Axle 1: left 6 mm right 6 mm Lodpoxu Dlqsfx Anxjhl Axle 2: left 10 mm right 10mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, A CNC machining center is offered. Control: Heidenhain TNC 426, spindle motor power: 13kW, full-load current: 30A, internal coolant supply: 10bar, spindle hours: 21704h, machine power-on hours: 51118h, control power-on hours: 25924h, program run time: 20017h. Equipped with internal coolant supply 10bar, 4th and 5th axes and machine vises. Weight: approx. 4300kg. An on-site inspection is possible. Lsdpfx Anjz Dkiloxehl

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine – Like New We have various new parts in stock for Cold Jet machines. This machine is suitable for industrial cleaning, including small and very large projects. One advantage of this machine is that it doesn’t rely on new-generation electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Cold Jet Applicator 2 x Nozzles – NEW One of the best machines in the world. It has no electronics, which is why it is so reliable. Furthermore, maintenance costs are relatively low. For inquiries or to arrange a viewing, please contact us at Dr. Dryice. Lhodewg R Rmepfx Anxel All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us. Worldwide shipping is available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: used, Year of construction: 2001, functionality: fully functional, CNC turning and milling center Okuma MacTurn 30 Control system: OSP-U100L Year of manufacture: 2001 Internal machine number: 51 Turning length: 1,000 mm Turning diameter: max. 500 mm Lhodpfjzwl Raox Anxsl Diameter of rotation over the machine bed: 500 mm Diameter of rotation over the tool slide: 500 mm Tool holder: SK 40 Tool positions: 60 positions Travel ranges: X-axis: 430 mm Y-axis: 190 (+/-95) mm Z-axis: 1,090 mm C-axis: 0.001° - 3-jaw chuck SMW Autoblok - Programmable tailstock - Chip conveyor - Paper band filter system with high-pressure pump - Oil mist extraction system - Touchsetter - One Touch IGF - Door automatic - Large chuck package - Large tool package

Condition: used, Year of construction: 1999, operating hours: 23,765 h, Type of fuel: Electric Colour: Grey Empty weight: 4.900 kg Dimensions (LxBxH): 240 x 120 x 243 cm Lifting capacity: 3.000 kg Lift height: 380 cm Fork dimensions: 1.340 x 680 mm - Year: 1999 - Documentation available: Yes - CE certificate present: No - Serial number: 516025008830 - Operating hours: 23765 - Lifting capacity: 3000kg - Lifting height: 3800mm - Overhead clearance: 2430mm - Free lift: 0mm - Fork length: 1340mm - Maximum fork width: 680mm - Minimum fork width: 0mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Hydraulic extendable forks - Options: Work lights - Mast: Duplex - Drive: Electric - Battery information: - └ Brand/Type: Hoppecke - └ Battery year of construction: 2016 - └ Capacity: 700Ah - └ Battery voltage: 80V - Transport dimensions: 2400mm x 1200mm x 2430mm (l x w x h) - Transport weight [kg]: 4900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Ljdeydlnyepfx Anxjhl Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, power: 24 kW (32.63 HP), color: yellow, Year of construction: 1996, operating hours: 11,776 h, CATERPILLAR GEP30 OLYMPIAN GENERATOR SET...30 KVA DIESEL GENERATOR...IN GOOD WORKING ORDER...STARTS AND RUNS... Lsdpfsi Uz Iqex Anxjhl

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm Lhsdjxcukaopfx Anxjl bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Condition: as good as new (ex-display), Year of construction: 2021, L-beam 40 x 5.0 (d 500) mm I - beam section - flat steel 80 x 15 (d 700) mm I-beam section - upend 50 x 10 (d 800) mm round material 30.0 (d 700) mm bar material dia. max. 60 x 2 (d 1200) mm square material 50 x 30 x 3 mm range L-W-H 670 x 530 x 1350 mm weight 185 kg total power requirement 0.75 kW Exhibition machine from 2021 with only approx. 2x operating hours Condition as NEW Lsdpjxcui Nsfx Anxjhl Special price on request Equipment: - robust electro-motorized ring/profile bending machine - horizontal and vertical work possible * Machine head can be folded 90° - 1x freely movable foot switch - segmented standard rollers (divided) - 2x motor-driven rollers - manual delivery of the top roller - analog position display of the top rollers (scale) - manually adjustable side/straightening rollers - CE mark / declaration of conformity - Operating instructions in German

Year of construction: 2009, condition: used, GEA Niro Soavi NS2002H Laboratory Homogenizer – 30 L/h – 60 MPa – 2009 The GEA Niro Soavi NS2002H is a compact, high‑pressure laboratory homogenizer designed for R&D, pilot trials and small‑scale production. This 2009 unit is in very good condition and offers a processing capacity of up to 30 L/h (30 dm³/h), depending on product and pressure. With a working pressure up to 60 MPa (600 bar), the NS2002H delivers efficient particle size reduction and stable emulsions, making it ideal for demanding formulations and scale‑up work. Key Features • Model: GEA Niro Soavi NS2002H • Year of manufacture: 2009 • Capacity: up to 30 L/h (product and pressure dependent) • Working pressure: up to 60 MPa (600 bar) • Laboratory / bench‑scale design – compact and easy to install in R&D labs • Stainless steel product contact parts for hygiene and corrosion resistance • Adjustable homogenizing pressure for precise process control and repeatability • Designed for continuous operation with stable, reliable performance Typical Applications • Dairy: milk, cream, flavoured dairy beverages Lhodpfx Anoy Nmy Aexsl • Food & beverage: sauces, dressings, juices, nutritional drinks • Cosmetics & personal care: creams, lotions, gels, serums • Pharma & biotech: emulsions, suspensions, nutraceuticals, pilot batches Benefits • Fine and uniform particle size for improved product stability • Enhanced texture, mouthfeel and visual appearance • Low product hold‑up volume – ideal for trials and high‑value products • Easy operation and cleaning, suitable for frequent product changeovers Capacity: 30 L/H on 600 Bar Working Pressure: 600 bar Max No. Stages: 2 condition: Very Good condition Available: Immediately

Condition: good (used), Year of construction: 2013, fuel type: gas, fork length: 2,710 mm, Maximum passing height: 0,218 cm CE mark: yes Technical condition: good Visual appearance: good Production country: FR Please contact Christian Theißen for more information Manufacturer: Manitou Model: MI 30 G Year of build: 2013 Condition: Used Lsdpfx Anszntvfoxohl Data: Max. lifting height: 4,59 m Max. Lifting capacity: 3.000 kg Length forks: 1,80 m Drive type: Gas Dimensions LxW (without forks): 2,71 x 1,24 m Stowed height: 2,18 m Empty weight: 4.750 kg Special features: White tires. Side shifter, street lighting, trailer operation possible. Location: 41468 Neuss immediately available

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 4.950 kg Axle 1: left 5 mm right 5 mm Axle 2: left 10 mm right 10 mm Axle 3: left 5 mm right 5 mm We have the possibility to stack trailers! Lhedezkldaspfx Anxjl