Asphalt milling machine buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
1
Elect./Voltage: 440 V, 60 Cy, 3 Ph. Juwtye FELL LDF Dowel Milling Machine; Through Feed Dowel Milling [...] & Features: -- Milling capacity of 1/2" to 2-1/4" dowels. -- Adjustable cutting head with 7/8", 1", 1-1/2",1-5/8", 1-3/4" and 2" sleeves. -- Heavy duty cast iron machine. -- 20 HP motor. -- Approx. weight 950 Lbs. more
6

Bed type Correa Milling machine CORREA A30/40 - 6300110A30/40

Burgos, SpainSpain dealership location
6043 km
1993
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-407 Technical features Dimensions Table dimensions: 4500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm Milling head Head type: Universal Manual... more
5
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Kcvcj9nv Dovetail 75 to 90 mm 15 mm high Hole 55 mm Drawing on the photographs Dimensions 130/70/H150 mm Weight 10 kg more
2
Milling machine Horizontal FOREST Type H500A0 Coures XYZ 2000 500 500 mm Sh9vcger Table 2800 x 500 mm pin his 50 head swivel display 3 axis more
4

Knee-and-Column Milling Machine - vert. TOS FA 5 V

Mönchengladbach, GermanyGermany dealership location
6371 km
1960
used
x-travel:1200 mm y-travel:450 mm z-travel:410 mm table clamping surface::2000 x 425 spindle speeds::22 - 1450 U/min milling-head swivable +/-:90 ° 9o8k2q0eh spindle taper::ISO 50 main drive motor:11 kW total power requirement:15 kW weight of the machine ca.:3,0 t dimensions of the machine ca.:2,4 x 1,8 x 2,3 m quill stroke:100 mm - vise - misc. arbors more
4
x-travel 310 mm y-travel 170 mm z-travel 340 mm spindle head ISO 40 table-size 215 x 600 mm feeds 16, von 9-450 mm/min spindle taper SK 40 spindle turning speed range 50 - 2500 U/min Drive 1,4 / 2,3 kW switchgear cabinet weight of the machine ca. 900 kg dimensions of the machine ca. 1,1 x 1,1 x 1,3 m Condition: ready for operation Angle table ( fixed ) Machinefeets 4 Vertical milling head with quill adjustment Electric 380 Volt Construction same as Deckel FP 1. Srbprw Machine d... more
15

Horizontal Borers UNION BFT100/IV Horizontal Boring/facing/milling machine, with Tailstock.

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 9854 Table size 1500 mm x 1320 mm Table Longitudinal traverse (Y) 1500 mm Table Cross traverse (X) 1500 mm Table Swivels 360 degrees Head stock vertical traverse (Z) 1250 mm Input 415/3/50 11 kw Spindle & facing speeds 5 - 140 rpm Spindle speeds 125 - 710 rpm Feed rate 0.00025 - 1.67 mm Facing head diameter 690 mm Facing head slide cross traverse 200 mm Spindle traverse 850 mm Spindle diameter 100 mm Spindle Taper no 6 morse taper Facing head to tail stock 3000 mm Digital read out New... more
13

Bed type Correa Milling machine CORREA A30/30 - 630183A30/30

Burgos, SpainSpain dealership location
6043 km
2000
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-426-PB Technical features Dimensions Table dimensions: 3500 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mm Y axis traverse: 1200 mm Z axis traverse: 1000 mm Milling head Head type: Universal Man... more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Hyb0arwm3 Dovetail 112 to 140 mm 24 mm high Drawing on the photographs Size 215/90/H200 mm Weight 11.5 kg more


asphalt mi...
daily

New machines via email!

Stay updated!
5
x-travel:1245 mm y-travel:630 mm z-travel:550 mm table-size:1200 x 630 mm Bax9hp3fvs tool taper:SK 40 milling spindle turning speed range::20 - 7000 1/min milling spindle motor:12 kW control:HEIDENHAIN TNC 426 feed stepless:0 - 20.000 mm/min rapid traverse:15 / 20 m/min quill stroke:67 mm total power requirement:25 kVA dimensions of the machine ca.:2,3 x 3,7 x 2,4 m weight of the machine ca.:6000 kg more
51

Milling machines Waldrich Siegen PF-F-150

Babberich, NetherlandsNetherlands dealership location
6320 km
ready for operation (used)
Technical data X Achse12000 mm Y - Achse7300 mm Z - Achse3000 mm W - Achse4000 mm Bch908lwzs Mobile stand, bed / Portal / LateralPORTAL MILLING MACHINE SteuerungsartSiemens Sinumrik 840 D 6 axis Table size / Größe12000 x 4730 mm Table burden in kG250000 ... more
5
spindle diameter 63 mm x-travel 650 mm y-travel 600 mm z-travel 750 mm 7338b7fc0 table surface area 650 x 800 mm table load capacity 2000 kg tool taper ISO 40 quill adjustment 400 mm turning speed range - spindle 33 - 1500 U/min feeds x/y/z 16: 0,015 - 3 mm/U rapid traverse 2500 mm/min Drive 5,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 3,3 x 1,8 x 2,1 m Condition: ready for operation Electric 380 Volt Hardened guidance pathes Autom. tool collection Hanging pan... more
6

CNC Millers BOKO WF3/12 4 axis CNC Milling Machine with Heidenhain TNC 415 control

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Control Heidenhain TNC 415 Table Size 1600 mm x 1200 mm Table Left/Right 1600 mm x axis Table In/Out 1150 mm y axis table swivels 360 degrees c axis Vertical Travel (head) 900 mm z axis Feed Rate variable Input 400/3/50 11 kw Speeds 35.5 - 1800 rpm Spindle Taper 50 int Spindle Rise & Fall 300 mm Head Swivels 90 degrees - 0 - 90 degrees Equipped with off- set milling head and coolant. Bciegxdfmh Length 14' Width 13' 8" Height 12' Nett Weight Actual. 15,820 Kgs / 15.57 Tons more
6

Bed type Anayak Milling machine ANAYAK VH-2200 - 1998VH 2200

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Bcieafjjtr Table dimensions: 2200 x 600 mm Traverses of axis X axis traverse: 2000 mm Y axis traverse: 900 mm Z axis traverse: 800 / 700 mm Milling head Head type: Automatic 2 positions (Horizontal/Vertical) Tool... more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Qlfeyqnz9 Dovetail each 150 on 181 mm 48 mm high Drawing on the photographs Dimensions 380/110/H310 mm Weight 32 kg more
5

Table Type Boring and Milling Machine WOTAN B 80 T

Mönchengladbach, GermanyGermany dealership location
6371 km
used
spindle diameter:80 mm x-travel:1000 mm Gvyibfkgc y-travel:900 mm z-axis table approx.:1120 quill stroke:710 mm spindle taper MT:5 Table area:1060 x 980 mm spindle turning speed range:6 - 710 U/min total power requirement:15 kW weight of the machine ca.:9 t dimensions of the machine ca.:4 x 2,6 x 2,6 m The machine was in a training school and generally overhauled in 2008! 5-axes digital readout make HEIDENHAIN diverse clamping tools and toolholders more
10

Milling machines Emco FB 5

More Emco Fb 5
Babberich, NetherlandsNetherlands dealership location
6320 km
1998
ready for operation (used)
Technical data X Achse600 mm Y - Achse400 mm Z - Achse400 mm Table size / Größe800 x 400 mm Table burden in kG400 kg Werkzeugaufnahmesk mm ... more
2
spindle diameter 128 mm travel -x axis 850 mm travel -y axis 900 mm travel -z axis 950 mm spindle stroke NEIN table surface area 1000 x 800 mm table rotating 360 ° max. table load 1500 kg spindle taper ISO 50 spindle turning speed range 15 - 1250 U/min feeds 0,5 - 66,33 mm/min coolant voltage 380 V total power requirement 16 kW weight of the machine ca. 9,0 t dimensions of the machine ca. 2,25 x 3,55 x 2,70 m switchgear cabinet 1,40 x 0,53 x 1,82 m Byvhisie - Fabr. - No.: 69141086 - Mach... more
2

Horizontal Borers KEARNS RICHARDS SH75 Horizontal Boring/Facing/Milling Machine. 75mm Spindle

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Serial No. 7076 Table size 1000mm x 1000mm Table Longitudinal traverse (Y) 1000mm Table Cross traverse (X) 1250mm Bciey303se Table Swivels 360 Degrees Head stock vertical traverse (Z) 1000mm Input 400/440/3/50 ac 7.5 kW Spindle & facing speeds 5.6-280 rpm Spindle speeds 180-1120 rpm Feed rate 0.76mm-3800mm per Minute Facing head diameter 500mm Facing head slide cross traverse 160mm Spindle traverse 500mm Spindle diameter 75mm Spindle Taper 40 int Equipment Spindle Support & Vertical Milling Hea... more
1

Bed type Correa Milling machine CORREA A30/50 - 6300905A30/50

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN CNC TNC-426-PB Technical features Dimensions Table dimensions: 5000 x 1100 mm Number of T slots: 8 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 1200 mm Z axis traverse: 1500 mm   ... more
4
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Dovetail 70 to 98 mm 23 mm high Bore 40 mm Drawing on the photographs Dimensions 155/90/H150 mm Ebdgfhz Weight 7 kg more
5

Milling Machine DECKEL FP4NC

More Deckel Fp 4
Kaiserslautern, GermanyGermany
6535 km
1991
excellent (used)
OVERVIEW: Brand: DECKEL Model: FP4NC Nep9j Application type: Milling Machine type: Milling Machine Availability: Immediately Construction year: 1991 Production hours: 28000 Location: Netherlands Origin country: Germany CONTROL UNIT: Brand: Grundig Model: Dialog 11 MOVEMENT: X-AXIS movement: 560 mm Y-AXIS movement: 500 mm Z-AXIS movement: 450 mm more
17

Milling machines Deckel Maho DMU 50 M

Babberich, NetherlandsNetherlands dealership location
6320 km
1998
ready for operation (used)
Technical data X Achse500 mm Y - Achse400 mm Z - Achse400 mm Mobile stand, bed / LateralVMC / Portal SteuerungsartHeidenhain TNC 124 Table size / Größe700 x 500 mm Table burden in kG200 kg WerkzeugaufnahmeSk40 Spindle9 kW ... more
3
Including: - HEIDENHAIN Glastäbe, - 1 vise, 1 part head MECO with accessories Neot2 more
6
gebr. 5 spindle copy milling machine make ELUMATEC Model KF 178/50.-No.: 20457 year 1998 Number of spindles 5 Cutting area after stroke, and template above 340 x 100 mm Stroke 110 mm Milling range below 240 x 85 mm Stroke: Bclyuj79w3 front 95 mm rear 45 mm each right and left milling unit built: Hub: length 160 mm Cross 100 mm vertical 80 mm Spindle speed 12000 RPM Air 7 bar 5 Motors 0,74 kW External dimensions: length 2800 mm Width: 1200 mm Height 140... more
14

Bed type Correa Milling machine CORREA CF25/25 - 2002CF25/25

Burgos, SpainSpain dealership location
6043 km
2002
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 2800 x 1000 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Clqmndn Y axis traverse: 1000 mm Z axis traverse: 1000 mm Milling head Head type: Univers... more
5
Overarm, bearing, pillow block, Plummer, warehouse for milling machine Kpqcxd Dovetail 148 on 178 mm 30 mm high Bore diameter 45 mm Drawing on the photographs Dimensions 300/80/H255 mm Weight 14 kg more
3
x-travel 1250 mm Uqwb0w22p y-travel 700 mm z-travel 665 mm table-size 1350 x 700 mm table load max. 1000 kg spindle taper ISO 50 turning speed range 20 - 2000 U/min control HEIDENHAIN TNC 150 feed X/Y/Z-axis 1 - 3000 mm/min. rapid traverse X/Y/Z axis 6000 mm/min. total power requirement 12 kW weight of the machine ca. 9 t range L-W-H 3,10 x 2,70 x 2,55 m acc.: original HURON-millinghead, hydr. tool clamping more
14

Milling machines Deckel Maho DMU 60 P Hi Dyn

Babberich, NetherlandsNetherlands dealership location
6320 km
2000
ready for operation (used)
Technical data X Achse600 mm Y - Achse700 mm Z - Achse600 mm Mobile stand, bed / Portal / Lateral5 axis SteuerungsartHeidenHain TNC 430 Table size / GrößeDiameter = 630 mm Table burden in kG600 kg WerkzeugaufnahmeHSK 63 Spindle1... more
2
-CNC control cover dialog 11 Bclmwrly02 -incl. hydraulic vise -plus. other accessories more
1
x-travel:0410 mm y-travel:350 mm z-travel:450 mm table-size:650x375 mm tool adaptor:SK 40 Jibr20j more
10

Bed type Correa CORREA milling machine DIANA-35 - 624057Diana 35

Burgos, SpainSpain dealership location
6043 km
2008
ready for operation (used)
Retrofitted: 2018 Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 3800 x 900 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse (mm): 3500 Y axis traverse (mm): 1000 Z axis traverse (mm): 1000 Milling head Head type: 2,5º Auto ... more
5
Overarm, bearing, pillow block, Plummer, warehouse for milling machine, upper support Bhh7w9wg Dovetail 86 to 73 mm 14 mm high Drawing on the photographs Dimensions body 132/760/H112 mm Dimensions spacer 138/324/H55 mm Weight 40 kg more
6

Millingmachine Jabre F4

Lemmer, NetherlandsNetherlands
6250 km
good (used)
Millingmachine Jarbe Coiwlvbu X-axis travel: 1.300 mm Y-axis travel: 330 mm Z-axis travel: 400 mm Table size: 1.900 x 370 mm Spindle nose: ISO 50 Spindle speeds: 36 - 1.800 Rpm Featured with: - Coolunit more
23

Milling machines Fadal USA VMC 3016

Babberich, NetherlandsNetherlands dealership location
6320 km
1999
ready for operation (used)
Technical data X Achse762 mm Y - Achse406 mm Z - Achse508 mm SteuerungsartCNC 88 HS Table size / Größe1000 x 400 mm Table burden in kG1240 kg WerkzeugaufnahmeSk 40 Performance spindle7. 5 kW Speed range / Stufen10. 000 rpm ... more
6
gebr. Bed milling machine type Tiger BF160 Built in 1990 Procedures: X = 1,600 mm Y = 850 mm Bbihmmsoc7 Worktable T-slots 1,800 x 600 mm, clamping surface Number of T grooves/distance: 5 / 112 mm Slot width 18 mm maximum table load of 3,000 kg including all machine components Machine weight approx. 11.2 t more
5
We offer you a used milling machine by the manufacturer VIKING Mondiale, Procedures Ftz2l2l X: 600 mm Y: 210 mm Z: 425/450 mm Table size: 230 x 950 mm Feed: 0,08-0,2 m / min Rapid traverse rate: 2 m / min Speed range: 31.5-1000 rpm Spindle retainer: SK 40 Coolant system Total capacity: 2.8 kW . Weight: 1100 kg Dimensions (W x D x H): 1.6 x 1.5 x 1.75 m Feed rate and rapid lateral movement axis X incl. SK40 recordings to milling and milling vise, thrust bearing for horizon... more
23

Bed type Correa Milling Machine CORREA CF22/25 - 9671102CF22/25

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2017 Numerical control: HEIDENHAIN TNC-410 Technical features Dimensions Table dimensions: 2500 x 700 mm Number of T slots: 5 T slots dimensions: 22 mm Traverses of axis X axis traverse: 2500 mm Y axis traverse: 800 mm Z axis traverse: 800 mm Milling head Head type: Universal manual To... more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Ukurgwvwe Performance 3.7 kW 5820 RPM @ 100 Hz Performance 3.7 kW 17350 rpm at 300 Hz Voltage 220/220 volt Recording shaft Ø 24 mm Dimensions 355/125/H210 mm Weight 20 kg more
6

Worm Milling Machine PFAUTER PE125H SF

Monheim, GermanyGermany dealership location
6403 km
1987
used
workpiece dia. 110 mm max. module 10 min. module swing diameter 240 mm Table rpm 0,25-20 U/min. table hole 63 mm axial travel 400 mm Yq3ncs toolpiece turning speed range 50 - 200 U/min tool diameter 255 mm tool length - max. 50 mm milling arbors ISO 40 (50 mm) rapid travel range 3 m/min control Bosch CC 300 M max. workpiece diameter 110 mm cutter dia. min. 170 mm total power requirement 40 kW weight of the machine ca. 7 t dimensions of the machine ca. 4,5 x 4,5 x 2,4 m The machine is in... more
37

Milling machines CME Spain BF 03

Babberich, NetherlandsNetherlands dealership location
6320 km
1999
ready for operation (used)
Technical data X Achse2000 mm Y - Achse1000 mm Z - Achse1000 mm Mobile stand, bed / Lateralbed / Portal milling machine SteuerungsartHeidenHain TNC 410 Table size / Größe2200 x 850 mm Table burden in kG4000 kg WerkzeugaufnahmeBt 50 ... more
5
x-travel 500 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 18 von 40-2000 U/min 8ki87ejlb feeds autom. 10-500 mm/min rapid traverse 1200 mm/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,2 x 1,2 x 1,85 m Condition: ready for operation Electric 380 Volt Vertical milling head with own feed Cooling equipment Swiveling table 800 x 270 mm Tool milling machine with feeds and rapid traverse in all thr... more
13
Used model milling machine of construction of Internal number: m2515 Manufacturer Zimmermann Type FZ 5 v Ma. Number 178 Built approx. 1985 Table size 750 x 500 mm X way 750 mm (with feed) Y way 320 mm Z-way 450 mm (with feed) Round table 360 ° (with feed) Ctmtslk0 Recording SK 40 Speeds 56 up to 4,500 rpm. Total height 2.70 m Weight approx. 2.2 t With Digital ACU-RITE III Item location: 58730 Fröndenberg/Ruhr The machine can be visited like to see power and tried out. ... more
8

Bridge type Correa CORREA milling machine FP40/50FP40/50

Burgos, SpainSpain dealership location
6043 km
1998
ready for operation (used)
Retrofitted: 2018 Numerical control: Heidenhain TNC-530 Technical features Dimensions Table dimensions: 5000 x 2000 mm Number of T slots: 13 T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mm Y axis traverse: 3250 mm Z axis traverse: 1000 mm Distance between columns: 2500 mm Milling head ... more
5
Double end Tenoner, edge banding machine, Ritz motor, Zer chip er engine, electric motor, spindle motor, milling motor Performance 6.6 kW 8915 rpm at 300 Hz Voltage 165 Volt Buahjzga Recording shaft Ø 35 mm Dimensions 520/247/H145 mm Weight 51 kg more
4
gebr. Coping machine make ELU Model KF 78. number: 21461 built 1978 Vertical milling unit: Milling length 290 mm Cutting width 100 mm Milling stroke 120 mm Horizontal milling unit: Milling length 270 mm Cutting width 70 mm Milling stroke 120 mm Profile width max. 150 mm Profile height max. 150 mm Bclp2skmbo 2 milling spindles per 740 W Spindle speed 12,000 rpm Compressed air supply 7 bar External dimensions: Length 800 mm Width 1100 mm Height 1300 mm W... more
36

Milling machines Mazak Variaxis 500 - 5X

More Mazak Variaxis 500
Babberich, NetherlandsNetherlands dealership location
6320 km
2007
ready for operation (used)
Technical data X Achse510 mm Y - Achse510 mm Z - Achse460 mm SteuerungsartMazatrol 640M 5 X Table size / Größe500 x 400 mm Table burden in kG300 kg WerkzeugaufnahmeBt40 Spindle22 kW Speed range / Stufen12000 RPM Bch7vqjx8j ... more
6
x-travel 510 mm y-travel 450 mm table-size 250 x 700 mm model table 430 x 600 mm drive for spindle 1,5 / 1,8 kw tool taper MK II bis 20 mm turning speed range 80 - 10 000 U/min table size towing table 400 x 400 mm working area 510 x 450 mm weight of the machine ca. 1400 kg dimensions of the machine ca. 1,6 x 1,4 x 1,95 m Electric 380 Volt Machinelight Towing table. Yearof construction is not known. Kkymww22 Machine dealer with own stock of 2500 m² and certification of the database "Mach... more
6
x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min max. torque on the spindle 3000 Nm spindle drive 30 kW 3fcmr0luf feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 20... more


asphalt mi...
daily

New machines via email!

Stay updated!

to

to

Edit search
ASPHALT MILLING MACHINE
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close