Used Crankshaft Milling Machine for sale (65,279)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 110,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Hodjyahv Sopfx Ad Renk Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Hodjx D Tbmspfx Ad Rjnk Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Hedpfexxb Rrsx Ad Rjnk Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions & Weight Dimensions (L x W x H): 4000 x 1000 x 1600 mm Machine weight: 400 kg Hsdpeyn Ecxofx Ad Ronk EQUIPMENT Support surfaces on the right and left External reference: Groven - Lot 8

Year of construction: 2019, condition: not inspected (used), functionality: unexamined, travel distance X-axis: 300 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 150 mm, machine/vehicle number: 24952, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Travel X-axis: approx. 300 mm Travel Y-axis: approx. 450 mm Hedpfx Adsyniuxo Rjnk Travel Z-axis: approx. 150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,500 mm Machine weight: 150 kg EQUIPMENT STEPCRAFT MM1000 milling unit External reference: Lot 64 / Wittner

Condition: ready for operation (used), functionality: fully functional, No reserve price – guaranteed sale to the highest bidder! Placing a bid obliges you to collect the item within the specified time frame: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Travel X: 190 mm Travel Y: 140 mm Travel Z: 260 mm Tool holder: SK 30 (presumably) Maximum tool clamping length: 35 mm Table dimensions: 420 x 120 mm Jaw width: 60 mm MACHINE DETAILS Control: EMCO EASY 2 CONTROL (HEIDENHAIN TNC 640, SIEMENS SINUMERIC 840) Operating voltage: 230 V Frequency: 50 – 60 Hz Rated current: 2.8 A Hnodjym Ak Djpfx Ad Rok EQUIPMENT Special machine vice: EMCO vice with 2 slots Mobile workbench: incl. various suitable contents Tool changer: 7 positions Collets Various suitable tool holders Note: An identical machine with the same specifications will be delivered, but not necessarily the exact unit shown in the photos.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 1,000 mm, controller model: Siemens NCU 840 W Serie 2, number of axes: 5, TECHNICAL DETAILS Travel X-axis: 2,500 mm Travel Y-axis: 1,750 mm Travel Z-axis: 1,000 mm A-axis: 20 arcseconds C-axis: 30 arcseconds Rapid traverse X-axis: 17 m/min Rapid traverse Y-axis: 17 m/min Rapid traverse Z-axis: 10 m/min Rapid traverse A-axis: 9 rpm Rapid traverse C-axis: 80 rpm Infinitely variable feed X and Y axes: up to 15,000 mm/min Feed Z-axis: up to 4,000 mm/min Hnedpfeyz Abtjx Ad Rjk Table plate: St 52-3 Table dimensions (L x W): 3,631 x 1,200 mm Milling head: FK 115 - SK40 Speed: 14–1,000 rpm Bearing: A9 LC8 CNC A-axis: spindle swivel axis A-axis Swivel angle: ±120 degrees Torque: 450 Nm Speed: 8 rpm Resolution: 20 arcseconds Clamping: hydraulic C-axis Rotation angle: 365 degrees Torque: 580 Nm Speed: max. 8 rpm Resolution: 30 arcseconds Clamping: hydraulic MACHINE DETAILS Control: Siemens NCU 840 W Series 2 CNC controlled axes: 5 Voltage: 400 V 50 Hz Power: approx. 35 kW Weight: 18,500 kg EQUIPMENT Swarf conveyor Sliding door Side window Tool changer stationary at center of machine/ rear crossbeam Disc magazine with 16 stations SK40 Heidenhain length measuring system Note: The seller can arrange an external service provider for the removal of the machine.

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 111146, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rotational speed (max.): 10,000 rpm, controller model: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Tool weight: max. 7 kg Tool diameter: max. 76 mm Tool diameter with adjacent station free: max. 140 mm Tool length: max. 300 mm MACHINE DETAILS Control: Heidenhain 530 Hnjdpfxsyzxz Ns Ad Rok Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guides X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guides X/Y/Z Chip conveyor Handwheel Note: The machine is sold without tools and vise.

Condition: excellent (used), functionality: fully functional, feed length X-axis: 1,800 mm, feed length Y-axis: 1,150 mm, feed length Z-axis: 1,370 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 1,370 mm, spindle speed (max.): 1,800 rpm, table width: 800 mm, table length: 1,625 mm, Boko F30 4 Axis CNC Milling and Boring Machine Model: F30 Table Area: 1625 x 800mm Fully Rotational Through Control Control: Heidenhain 426 ‘X’ Axis: 1800mm ‘Y’ Axis: 1150mm ‘Z’ Axis: 1370mm Spindle Taper: 50 INT Hnsdeyynqdspfx Ad Rjk Spindle Speeds: To 1800 RPM

Condition: used, Butler Elgamill CNC Travelling Column Bed Type Mill x 5000mm T slotted Table 8,000mm x 1030mm Column travel X 6200mm TBC Ram travel Y 1250mm TBC Vertical travel of Head Z 1950mm TBC Spindle speeds Various and a Max of RPM TBC Hedpfxjyx Hv As Ad Ronk Spindle Taper 50 Spindle drive motor HP TBC Power feeds Horizontal and Vertical 6 – 500 mm/min Rapid power traverse to all motions 2,000mm/min Complete With: Heidenhain CNC Control Manual Indexing Head Machine Data: Machine weight 20,000kg

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 80317, travel distance X-axis: 4,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 235 mm, input voltage: 380 V, Machine full working order use every week Hedoy Au Rpopfx Ad Rjnk

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Hnodpfx Adeyynvyo Rsk Interlocked guards, Power Drawbar, low Volt light.

Condition: excellent (used), feed length X-axis: 700 mm, feed length Y-axis: 350 mm, feed length Z-axis: 475 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 475 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 25 rpm, quill stroke: 100 mm, table length: 1,510 mm, table width: 350 mm, Cincinnati 2MK Horizontal Mill with Universal Vertical Head Model: 2MK Table Atea: 1510 x 350mm (60” x 14”) Longitudinal Travel: 700mm Hnsdpfx Adoygk Dro Rek Cross Travel: 350mm Vertical Travel: 475mm Spindle Taper: 50 INT Spindle Speeds: 25 – 1500 RPM Machine with: Horizontal Arbor & Arbor Support Angular Double Swivel Head

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Hnsdpfjuv Hrdjx Ad Rek Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy. Hsdpeh U Nvkjfx Ad Ronk

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Hnodpfxeu Dahno Ad Rsk Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: good (used), Year of construction: 2002, functionality: fully functional, USED Soraluce Soramill Model SP 10000 Travelling Column, Table Type CNC Milling Centre, with Automatic Oil Mist Lubricated Orthogonal Milling Head with 1 X 1 Degree Indexing and HEIDENHAIN TNC 430 M Control System. Year 2002 SN 8647 Table Area - 10000 x 1100 mm Column Traverse (X) - 8500 mm Vertical Traverse (Y) - 1600 mm Ram Traverse (Z) - 1200 mm Spindle Motor - 28 kW Spindle Taper - Standard ISO 50 BT50 tooling Pullstud - DIN 6987 2-Form A. ISO 7388/2-Form A Independent Gearbox with 2 Ranges Speed Range - 20 to 4000 RPM Hnjdpfsr Hr Arjx Ad Rsk Feed Range - 5 to 5000 mm/min Rapid traverse rate - (X, Y, Z) 15,000 mm/min Preloaded double nuts and recirculating ballscrews to each axis. Linear Guiding System with recirculating cylindrical rollers and steel guideway assemblies in X, Y and Z axes Independent A.C Drive motor to each axis. Linear Transducer in X, Y and Z-axes with air purge system. Automatic tool clamping. Automatic hydraulic tool releasing device. CNC Control HEIDENHAIN TNC-430-M. (Flat TFT screen with digital drives) 9 axes CNC and 1 spindle, 5 of them simultaneously interpolated. Working area lighting Electrical cabinet cooling system Electrical cabinet lighting Heidenhain HR410 portable electronic handwheel with 3m spiral cable Horizontally articulated pendant for CNC control Orthogonal head 28KW, 800Nm, 1deg x 1 deg, 4000rpm oil lubricated Price includes oil cooling unit for both head and gearbox. Option G2, Ram prepared for 4000rpm, is also included. Coolant through the spindle type AD. Coolant system with 500l capacity tank with two pumps providing low and high pressure of 3 and 8 bars and 50l/min flow. The system includes a combined paper and magnetic drum-filtering unit. Standard operators platform fixed to the column 40 tools capacity toolchanger magazine, BT50 Max. Tool length = 400 mm. Max. Tool diameter: - With full magazine = 120 mm. With adjacent position empty = 250 mm. Max. Tool weight = 20 kg. Mean tool weight with full magazine = 10 kg. Max. Permitted total weight = 20 kg. Swarf Conveyor Hinge type conveyor belt Machine preparation for the addition of a 4th axis electro-mechanical table. Splash Guarding against swarf at the table front and both sides. Consists of four sliding front doors with a height from the floor of 2.100mm and a length of 1.700mm each one. Manually operated opening and closing with mechanical interlock. The doors can be opened for the full longitudinal traverse. The rear of the table is open. Protection in the back and both lateral sides of the machine column.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Hjdpfx Adew U Tlzs Rjnk Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: used, Year of construction: 1998, functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. Hsdowgd Rgepfx Ad Renk LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: used, Year of construction: 2001, Union KCU-130 Table Type Horizontal Boring & Milling Machine with Heidenhain TNC430 Control, X/Y/Z = 4000/3000/1500mm, Table Size 2000 x 2500 x 20,000kgs, B-axis 360 Deg, Spindle Taper BT50, 60 Position ATC, W-axis, U-axis, Swarf Conveyor, Through Spindle Coolant, Guarding Enclosure. S/No. 1370022 (2001) Please Note: Toolholders/Tooling photographed in the toolchanger will not be supplied with this machine. Any available tooling will be a specifically described. Please Note: This Lot is located in Irvine. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Hodpfex T Ddyjx Ad Renk

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: Hsdpfoyzf Naox Ad Ronk W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2000, Used bed-type milling machine from Wagner Model: SMB 2000 Heidenhain TNC 426 CNC control Hjdpfoy Atypox Ad Renk Including various tool holders (excluding tools) SK 50 spindle taper Swivelling milling head

Condition: excellent (used), Year of construction: 1997, Bridgeport Interact 1 Mk2 CNC Milling Machine Heidenhain TNC370 Control Year 1997. 3 Axis Milling Capability XYZ Travels 457 x 305 x 365mm Quill Travel 125mm Hsdpfx Adjyzfvmo Ronk Spindle Taper ISO30 Weight Apporx 1600kgs. Coolant 3 Phase Electrics For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #79164 Machine Serial Number: 720889 06 97 £3,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Hnedsyzfn Aspfx Ad Rok Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, input voltage: 400 V, Schaublin 53 in good condition. ISO-40. 5.1 kW. Hnodpfxjy A Nbie Ad Rek