Used Atlas 1704 Lc for sale (436)

Year of construction: 2015, condition: ready for operation (used), An oil-free, water-injected Atlas Copco screw compressor is available. Volume flow: 1.3m³-5m³/min, max. pressure: 13bar, motor power: 30kW, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1500mm, weight: approx. 1300kg, operating hours: 46000h. Documentation available. On-site inspection is possible. Kdjdpfx Asudy Sdoqiet

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Kodpfx Aszh Nizsqijdt

Condition: excellent (used), Atlas Type: SC 350 MHG Atlas Solar Climatic Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climatic chamber with solar simulation via MHG lamp). The device is suitable for carrying out standardized weathering and aging tests under the combined influence of radiation, temperature, and climate. Features & Highlights: - Precise temperature and humidity control - Integrated humidification system with water reservoir - Cooling via water or air system (optional) - Feed-throughs available for measuring leads - Control via control panel or interfaces (RS232, etc.) - Sturdy test chamber floor, loadable up to 60 kg (optionally reinforced to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Irradiation unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Light source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering spectrum: 300–3,000 nm, compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/Cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at a distance of 1 m Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg Information for your safety as a buyer! Kdodsziizmepfx Aqiet The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers are subjected to a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and technical details subject to change and errors reserved!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 2002, operating hours: 15,152 h, Equipment: all wheel drive, * Pallet fork & bucket * Enclosed cab * Front hydraulics * Engine power: 74 kW * Year of manufacture: 2002 * Work lights ----Internal vehicle number 9531----Errors & interim sale excepted WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp Ksdszp Ddpepfx Aqiodt WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: excellent (used), Year of construction: 2013, overall weight: 403 kg, volume flow: 2.2 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, input voltage: 400 V, ATLAS COPCO GA 15 screw compressor Atlas Copco screw element 15 kW motor Capacity: 2.20 m3/min Pressure: 10 bar Year of manufacture: 2018 Operating hours: 10412 hours Kdodpfszxzvnjx Aqist Compressor in fully working condition.

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO XAS87 COMPRESSOR, 5.00 m3, 12 bar!! DIESEL ATLAS COPCO XAS87 compressor, serviced. Technical data: Kodpfxetyk Tae Aqisdt Capacity: 5.00 m3/min; Operating pressure: 7 bar; Year of manufacture: 2012; Engine: KUBOTA Operating hours: 1397 h!!! The compressor is in full working order, ready for operation, and comes with a warranty. Net price: 32,500 PLN Gross price: 39,975 PLN Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2019, Equipment: compressor, ATLAS COPCO XAS88 5.2m3 COMPRESSOR 2019 DIESEL compressor ATLAS COPCO XAS 88 after full service Technical data: Kdedordf Swopfx Aqijt capacity 5.20 m3/min; working pressure 7 Bar; production year 2019; KUBOTA engine mileage 1519h!!! compressor fully operational net price: 58800 zł gross price: 72324 zł Below is a link to the video , showing the work of the machine

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Kedpsvpq Tbsfx Aqiedt Additional information Please contact Ö. Inalkac for more information We offer you Rebuild/overhauled/ überholt Atlas Copco/ Epiroc MB1500 from 2016. This model has New seal kit, retainer pins, bushes, stop pin, chisel/tool, shock absorber, hoses, decals and new painted. More units available. We can ship worldwide. MB1200 HB2000 MB1650 MB1700

Condition: excellent (used), Year of construction: 2016, General information Field of application: Construction Reference number: 4 Kodpfjvpq Thsx Aqiodt Weights Empty weight: 1.300 kg Functional Dimensions of cargo space: 200 x 70 x 60 cm CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Fits to following machines: 17-29ton Reconditioned: Yes Delivery terms: EXW Working pressure: 160-180 bar Required hydraulic flow: 155 l/min Strike count: 330-680 Latest inspection: 2025-01-02 Production country: DE Additional information Please contact Ö. Inalkac for more information We offer Atlas Copco/ Epiroc MB1500 from 2016 with Conti Lube, all bushes, seal kit, 2 guide plate small, 2 guide plate, 2 shock absorber, guide, 2 tool pin, 2 stop pin, chisel, decals, hoses and new painted. MB1600 MB1650 MB1700 MB1200

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,222 h, functionality: fully functional, machine/vehicle number: ya3064249n0867271, overall weight: 2,450 kg, fuel type: diesel, operating pressure: 14 bar, Equipment: type plate available, For sale is a powerful, mobile screw compressor, an Atlas Copco XAS 188-14 PACE S5. The machine is in good used condition and only shows the usual signs of wear and tear from use. The compressor is ideal for professional applications in sandblasting, abrasive blasting, construction, renovation, industry, and the operation of high-performance pneumatic tools. Thanks to the PACE technology, the required working pressure can be flexibly adjusted to suit the specific application. Kdedpozzp N Ijfx Aqiot Technical data: Manufacturer: Atlas Copco Model: XAS 188-14 PACE S5 Operating hours: approx. 2,222 h Fuel: Diesel Engine: John Deere, 4-cylinder Engine power: 104 kW / approx. 141 hp Working pressure: 5–14 bar Air flow rate: up to approx. 10.9 m³/min Emission stage: Stage V Control system: Atlas Copco PACE Sound power level: 99 dB(A) Design: mobile compressor on a single-axle chassis Braked chassis with drawbar Emergency stop and electronic control system are available The compressor can be inspected and test-run by appointment.

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Width: 600 mm -Height: 600 mm -Depth: 800 mm -Intermediate mounting dimension: 255/200 mm -Bore: Ø 45/50 mm -Laceration teeth -The design of the spoon attachment can be changed by us for an additional charge. Kodpfx Aqeb A I Rcsisdt -Weight: 160 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Atlas Copco, Standard cylinder type C4-200-40 -Stroke travel: 200 mm -Piston rod: Ø 40 mm Kdedpfx Aegr E R Ajqijt -Dimensions: 330/280/H510 mm Total weight: 33 kg

Condition: good (used), Pneumatic double diaphragm pump Kedpfx Aqedwf S Uoijdt -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 "inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

Condition: good (used), Digging bucket, excavator bucket, demolition bucket -Design: stable Kdedpfx Aqeb A I Injiot -Width: 570 mm -Height: 450 mm -Depth: 600 mm -Intermediate mounting dimension: 160 mm -Hole spacing: 220 mm -Bore: Ø 45 mm -extended cutting edge -The design of the spoon attachment can be changed by us for an additional charge. -Weight: 130 kg

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg Kodpfx Ajb A Sgksqiodt

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Ksdpjgr E R Usfx Aqiodt -Manufacturer: Atlas Copco, standard cylinder type C4-200 40-200 -Stroke: 194 mm -Piston rod: Ø 40 mm -Total dimensions: 220/265/H645 mm -Total weight: 24 kg

Condition: used, Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley Kdedod N Rt Djpfx Aqist -Barrier width: max. 100 mm -Payload: 2500 kg -Dimensions: 327/200/H270 mm -Weight: 27 kg

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders -Stroke: 50 mm -Piston diameter: 50 mm -Piston rod: 16 mm -Price: per piece -Number: 2 pieces Kdsdpfofbmu Sjx Aqist -Dimensions: 100/65/H65 mm -Weight: 0.75 kg/piece

Year of construction: 2005, condition: used, Balancers, machine balancers, spring balancer, cable pulley, counterbalance weight balancers Kedpfxogggy Ee Aqiedt -Manufacturer: Atlas Copco, type RIL 10C -Load capacity: 2.0 - 5.0 kg -Dimensions: 200/250/70 mm -Own weight: 2.6 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder Kdedpfx Aqjgrzvkoiot -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Stroke: 250 mm -Piston diameter: 40 mm Kedofbnkajpfx Aqisdt -Piston rod: 16 mm -Price: per piece -Number: 2 pieces -Dimensions: 410/55/H55 mm -Weight: 1.5 kg/piece

Condition: used, Year of construction: 2005, operating hours: 5,316 h, Equipment: all wheel drive, Equipment: * 5,316 operating hours * Engine power: 53.5 kW * 20 km/h * Hydraulic connections * Additional headlights * Rotating beacon * Quick coupler Other: * 1 previous owner * Originally delivered in Germany * Year of manufacture: 2005 * Service weight: 5,975 kg * Total weight: 6,500 kg * Brakes have an error message Since 1972, we have been your reliable partner for all things related to automobiles/commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles in stock from the areas of vans, commercial vehicles, and construction machinery! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly prepare a customized offer for you! We are interested in taking your commercial vehicle/construction machine in part exchange. Kdedpsx Rfbzefx Aqiet If a new TÜV (technical inspection) is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally without a new TÜV inspection. Delivery of your "new" commercial vehicle is possible through our external partners for an additional fee. The information provided in advertisements, on the internet, on price tags, and in images are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/warranty for typographical and data transmission errors. The listed equipment may need to be checked separately. Errors and prior sale excepted.

Condition: used, mileage: 11,920 km, power: 95 kW (129.16 HP), gearing type: other, fuel type: gasoline, color: yellow, overall weight: 23,000 kg, empty load weight: 21,816 kg, maximum load weight: 1,184 kg, number of seats: 1, first registration: 02/2013, emission class: none, suspension: other, Year of construction: 2013, operating hours: 11,920 h, total length: 7,700 mm, driver cabin: other, construction height: 4,000 mm, Equipment: air conditioning, parking heater, trailer coupling, The used Atlas 1604 K ZW KLIMA two-way excavator is a versatile machine, equipped with a quick coupler and a reliable Deutz engine. The excavator was manufactured in 2013 and has 11,920 operating hours. The machine offers an engine output of 95 kW (129 hp) and a displacement of 4,038 cc. It features a spacious double cab with a heated, air-suspended comfort seat and air conditioning. The vehicle is suitable for use on tram lines, thanks to its narrow axles and special support system. Other equipment features include an Eberspächer fuel heater, a CWF600 particulate filter, and a reversing camera with a monitor. The excavator has a heavy counterweight of 4.5 tons and a swing radius of 2,000 mm, which ensures greater stability and efficiency on the construction site. Kodpfx Aqer Uzazjijdt In addition, the excavator is equipped with a wagon brake system that can be controlled from the cab, as well as an electronic lifting limit to fine-tune the lifting and working cylinders. Inspections are possible during the specified opening hours without prior appointment. Sale is only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: new, Year of construction: 2017, functionality: fully functional, machine/vehicle number: API793297, overall weight: 1,431 kg, power: 37 kW (50.31 HP), pressure (max.): 8.6 bar, type of cooling: air, Equipment: documentation/manual, type plate available, BRAND NEW UNUSED Here we have a rare opportunity to purchase an 100% oil free air cooled variable speed drive twin stage rotary air compressor. Still on the manufacturers pallet from the factory in Belgium Energy efficient VSD machine Kdsdjxbtk Nopfx Aqijt

Condition: good (used), Year of construction: 2000, Atlas Copco ZT30 Air compressor Ksdpfsvtcw Tex Aqisdt Serial: AIF065086 2000, oil free air cooled screw compressor, operating pressure 8.6Bar, compressor output 69 l/s, motor 30Kw, comes with Ultrafilter International dryer model: HLALD0225 and Abbott air tank