Used Atlas Copco Ga 118 for sale (379)

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Kdjdpewlp Hdofx Acpou Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar Kdjdpozzpttjfx Acpou - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: good (used), Year of construction: 2008, MANUFACTURER: ATLASCOPCO MODEL: GA30 PLUS Serial Number: API595399 Year: 2008 Power (kW): 30 Kdsdpfxoyhn R Se Acpou Capacity (m3/min): 4.8 Pressure (bar): 10 Operating hours (documented/total): Frequency inverter: no Built-in dryer: no Heat exchanger: no Cooling (air/water): air

Condition: good (used), Year of construction: 2004, machine/vehicle number: A II 151768, Offer 25979 - Operating hours 16550 h - Operating pressure 10 bar Ksdpfswrcq Nox Acpodu - Delivery rate 15.9 l/s - Drive 400 V / 7.5 kW - Motor speed 3000 rpm - Air tank 250 L - Required space approx. W 700 x H 1830 x D 1050 mm - Weight approx. 250 kg

Condition: used, Year of construction: 2014, operating hours: 34,146 h, Atlas Copco GA15+ Screw Compressor For sale is a screw compressor manufactured by Atlas Copco, model GA15+. This compressor is ideal for industrial and commercial applications and is known for its reliability and durability. Technical specifications: Manufacturer: Atlas Copco Model: GA15+ Type: Screw compressor Year of manufacture: 2014 Operating hours: 34,162 h Note: Kdjdpsybbchofx Acpju All information is provided to the best of our knowledge, but without warranty. If you are interested or have any further questions, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2012, ATLAS COPCO GA30VSD screw compressor, machine with inverter, recently serviced. Technical specifications: capacity: 5.58 m3/min; engine power: 30 kW; maximum pressure: 13 bar; year: 2012; operating hours: 11816 h!!! Price: 24,500 net Price: 30,135 gross Compressor is fully functional, ready for operation, comes with a warranty. We provide service support. Kdsdpfx Ajy S T Thocpsu

Condition: good (used), Year of construction: 2017, machine/vehicle number: API262376, overall weight: 279 kg, volume flow: 150.6 m³/h, pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, We offer: ATLAS COPCO GA15VSDFF PLUS Technical data: YEAR: 2017 CAPACITY (kW): 15 OUTPUT (m3/min): 2.51 CIS (bar): 12.75 HOURS (DOC/GENERAL): 25107 INVERTER: yes BUILT-IN DEHUMIDIFIER: yes Kdedev Drrbopfx Acpeu

Condition: used, Year of construction: 2022, machine/vehicle number: API871724, ✅ Industrial Power – 75 kW (100 hp) motor for high airflow. ✅ Energy Efficiency – VSD+ technology that reduces consumption by up to 50%. ✅ High Performance – Massive airflow up to 13.5 m³/min at 13 bar pressure. ✅ Atlas Copco Reliability – World-renowned Belgian construction for continuous use. Technical Characteristics: Kodpey Nb Ihsfx Acpjdu Year of manufacture: 2022 | Model: GA75VSD+ | Maximum pressure (MAWP): 13 bar | Motor power: 75 kW (100 hp) | Airflow (Qv): 13.5 m³/min (224.7 l/s) | Motor speed: 6450 rpm | Voltage/Frequency/Phases: 400V / 50Hz / 3Ph | Weight (Mass): 898 kg | Origin: Belgium (Atlas Copco Airpower n.v.)

Condition: excellent (used), Year of construction: 2010, ATLAS COPCO GA22FF screw compressor with air dryer after service Technical data: capacity: 3.10 m3/min; 22 KW engine; max pressure 9.5 bar; Kodpfx Aev Uyxkocpjdu year; 2010 mileage; 8776h!!! 15200 net 18696 gross The compressor is fully functional, ready to work, warranty we provide service.

Condition: good (used), Year of construction: 2008, MANUFACTURER: ATLAS COPCO MODEL: GA45 SERIAL NO.: API594905 YEAR: 2008 Ksdpfx Acsyizmvepodu POWER (kW): 45 CAPACITY (m3/min): 7.18 PRESSURE (bar): 7.4 > 10

Condition: good (used), functionality: fully functional, overall weight: 1,150 kg, Year of construction: 2010, Compressor/Atlas Copco GA45P compressor Maximum allowable working pressure (MAWP) 7.8 bar/113psi Capacity 133.7 l/s 183.3CFM 8.02m³/min Kdedpfx Acjv Ey Tiopou Voltage 400V 50Hz Power 45kW/60HP 2985 pbr/min Weight 1150kg Year of manufacture 2010 Dimensions 2000x1000x1800mm

Condition: good (used), Year of construction: 2011, MANUFACTURER: ATLASCOPCO MODEL: GA160VSD SERIAL NUMBER: APF163595 Kdjdsyn Efgjpfx Acpou YEAR: 2011 POWER (kW): 186 CAPACITY (m3/min): 4.82–18.36 PRESSURE (bar): 10

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Kedozh Nizepfx Acpedu

Condition: ready for operation (used), Year of construction: 2006, MAKE: ATLAS COPCO MODEL: GA45 FF Serial no.: API591201 Year: 2006 Power (kW): 45 Output (m3/min): 7.28 Pressure (bar): 7.8 Operating hours (load/total): 8054/20214 Frequency inverter: no Built-in dryer: yes Kedjy Aux Tjpfx Acpsdu Heat exchanger: no Cooling (air/water): air Mounted on tank: no Connection: 2'

Condition: excellent (used), S017062 PROD. ATLASCOPCO TYPE GA26 Plus S/N API310087 YEAR 2008 POWER (kW) 26 CAPACITY (m3/min) 4.79 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 22740/23509 Ksdsz Iz Igepfx Acpodu FREQUENCY CONVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 NEW/USED USED

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF Kdedpfx Acsylwlmepju S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air ON RECEIVER TANK no

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 Kedpfx Aceylyz Dspedu CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: repair required (used), Year of construction: 2018, operating hours: 34,881 h, functionality: limited functionality, power: 45 kW (61.18 HP), volume flow: 502.2 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor 45 kW 8.50 bar 8.37 m3/min Kdsdpfx Aoz Iz Itecpou Year of manufacture: 2018 Operating hours: 34,881 Problem with the cooling system. The temperature is rising rapidly. The compressor is running.

Condition: good (used), Year of construction: 2008, volume flow: 464.4 m³/h, pressure (max.): 7.5 bar, Equipment: type plate available, PROD - ATLASCOPCO TYPE - GA45 S/N - API595605 YEAR - 2008 POWER (kW) - 45 OUTPUT. (m3/min) - 7.74 CIS (bar) - 7.5 Ksdpfx Acsrztmwjpodu

Condition: excellent (used), Year of construction: 1991, overall weight: 1,000 kg, volume flow: 7.2 m³/h, operating pressure: 75 bar, input voltage: 400 V, ATLAS COPCO GA 45 screw compressor With desiccant dryer 45 kW motor Capacity: 7.20 m3/min Kdodpfjukvvaex Acpsu Pressure: 7.5 bar The compressor is in perfect working order.

Condition: used, Year of construction: 2003, operating hours: 10,520 h, functionality: fully functional, machine/vehicle number: AII147591, power: 7 kW (9.52 HP), fuel type: electric, operating pressure: 7 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The 2001 ATLAS COPCO GA11 lubricated compressor is a reliable and high-performance unit, ideal for a wide range of industrial applications. Designed by a renowned manufacturer, this model delivers consistent pressure and airflow, thereby optimizing operational efficiency. The advanced technology integrated into this compressor ensures a significant reduction in downtime and simplifies maintenance, making this machine a strategic choice for industries seeking stability and durability. Kedpfxexn Iqqo Acpedu The GA11 is renowned for its robustness and ability to operate under demanding conditions. It is equipped with an integrated control and monitoring system, allowing for precise regulation, which guarantees economical and quiet operation. Although this model dates from 2001, its reliability and longevity mean it remains a valuable asset for any facility aiming to optimize its production processes. As a used device, this compressor has already demonstrated its capacity to support efficient and continuous production. Its design, focused on durability and performance, makes it easy to integrate into existing systems, offering flexibility that is highly valued by many professionals.

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Kdodpfx Aev Rmmmscpsu

Condition: used, MANUFACTURER: ATLASCOPCO MODEL: GA22 FF SERIAL NO.: AII239418 Ksdpfx Acjyizp Dopsdu YEAR: 1998 POWER (kW): 22 CAPACITY (m3/min): 3.22 PRESSURE (bar): 7.5

Condition: excellent (used), Year of construction: 2011, ATLAS COPCO GA37 SCREW COMPRESSOR, 37 kW, 2011! ATLAS COPCO GA37 screw compressor – machine after service. Technical data: capacity: 6.30 m3/min; Kdsdpfx Asi E Hncjcpou engine power: 37 kW; maximum pressure: 8 bar; year: 2011; operating hours: 6924 h!!! Compressor is fully functional, ready for operation, with warranty. We provide service support.

Condition: excellent (used), Year of construction: 2013, ATLAS COPCO GA30+ screw compressor, machine after service Technical specifications: Capacity: 4.94 m³/min; 30 kW motor; Maximum pressure: 10 bar; Year: 2013 Hours: 10,814h!!! Price: 19,500 net 23,985 gross The compressor is fully operational, ready for work, with warranty. Kdedpfow Nh H Ajx Acpju We provide service. Below is a link to a video.