Used Atlas Copco Ga 30 Ff for sale (391)

Condition: excellent (used), Year of construction: 2012, operating hours: 21,000 h, Screw compressor compressed air tank dryer oil remover location Mülheim an der Ruhr Nodpfewr Nnbex Anfswf

Condition: not inspected (used), Year of construction: 2014, operating hours: 43,965 h, functionality: fully functional, Used Atlas Copco GA30VSD+FF compressor Integrated dryer Integrated frequency converter Nwsdpfxexu Ibcs Anfef 30 kW 13 bar 5.85 m³/min Year of manufacture: 2014 Operating hours: 43965

Condition: excellent (used), Year of construction: 2014, operating hours: 4,293 h, MANUFACTURER ATLAS COPCO MODEL GA30FF S/N API325798 YEAR 2014 POWER (kW) 30 OUTPUT (m3/min) 5.4 PRESSURE (bar) 7.25 HOURS (DOC/TOTAL) 4293 FREQUENCY INVERTER no INTEGRATED DRYER yes, R134a 0.54kg HEAT EXCHANGER no COOLING (AIR/WATER) air Nwedpfx Ajylwlmonfsf ON RECEIVER TANK no

Condition: used, Year of construction: 2001, pressure (max.): 10 bar, Screw Compressor Manufacturer: Atlas Copco Type: GA 11 FF Year of Manufacture: 2001 Technical Specifications Manufacturer: Atlas Copco Type: GA 11 FF (with integrated refrigeration dryer) Year of Manufacture: 2001 Floor-Mounted Design Control System: Elektronikon Max. Operating Pressure: 10 bar Motor Speed: 3000 rpm Rated Power: 11.0 kW Dimensions: L 1.2 x W 0.70 x H 1.40 m Weight: 475 kg Nwsdpfx Anewivlujfsf All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2006, overall weight: 403 kg, fuel tank capacity: 270 l, operating pressure: 10 bar, input voltage: 400 V, ATLAS COPCO GA 7 VSD ff screw compressor Mounted on 270 l pressure vessel Variable speed (inverter) Nwjdpfx Aoy Hrpwenfef With refrigerant dryer Motor 7.5 kW Capacity 1.21 m³/min Pressure 13 bar Year of manufacture 2006

Condition: good (used), Year of construction: 2021, machine/vehicle number: AP I 275191, Offer 25447 Screw compressor with integrated dryer Nsdpfjyymm Rsx Anfewf Technical specifications: - Operating hours: 13,598 h - Operating pressure: 12.75 bar - Delivery rate approx.: 21.7 l/sec - Drive: 400 V / 7.5 kW - Motor speed approx.: 3,000 rpm - Air filter - Required space approx.: W 1,400 x H 1,600 x D 800 mm - Weight approx.: 270 kg

Condition: ready for operation (used), operating hours: 20,000 h, functionality: fully functional, 1.46–7.25 m³/min, recently measured. Njdeyg H Tcopfx Anfowf

Condition: excellent (used), Year of construction: 2008, overall weight: 1,195 kg, volume flow: 7.25 m³/h, operating pressure: 13 bar, input voltage: 400 V, ATLAS COPCO GA 37 VSD ff screw compressor Nwedpfxst Hdh No Anfof Variable speed, (inverter) With refrigerant dryer 37 kW motor Capacity 7.25 m3/min Pressure 13 bar Mileage 13200 hours The compressor is fully functional.

Year of construction: 2020, operating hours: 18,526 h, condition: ready for operation (used), functionality: fully functional, overall weight: 500 kg, operating pressure: 8 bar, rotational speed (max.): 6,500 rpm, machine/vehicle number: API842024, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified period: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. pressure: 8 bar Flow rate: 5.1 cm³/min Motor speed: 6,500 rpm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Motor power: 26 kW Dimensions & Weight Dimensions (L x W x H): 1,280 x 900 x 1,600 mm Nwjdpfx Ajym Nqqjnfsf Weight: 500 kg Recorded operating hours: 18,526 h External reference: CES - Lot 159

Year of construction: 2007, condition: ready for operation (used), Three Atlas Copco compressors are available. 1) Atlas Copco GA 37 VSD, year of manufacture: 2007, air flow rate: 7.25m³/min, max. operating pressure: 12.8bar, power: 37kW, refrigerant: R404a, weight: approx. 1200kg, operating hours: approx. 120844h. 2) Atlas Copco GA 50 VSD, year of manufacture: 2003, max. operating pressure: 13bar, air flow rate: 9.18m³/min, power: 50kW, refrigerant: R404a, weight: approx. 1300kg, operating hours: approx. 159308h. 3) Atlas Copco GA 30, year of manufacture: 2003, air flow rate: 5.34m³/h, max. operating pressure: 8bar, power: 30kW, refrigerant: R404a, weight: approx. 1000kg, operating hours: approx. 29700h. Documentation available. An on-site inspection is possible. Nwjdpsyn Nzxofx Anfof

Year of construction: 2000, condition: ready for operation (used), Operating pressure: 7.75bar, air volume flow: 40.4l/s, power: 15kW, speed: 3000rpm, machine weight: approx. 450kg. On-site inspection is possible. Njdpfswfg Hhjx Anfowf

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Njdpfxou Rptye Anfswf Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions

Condition: excellent (used), Year of construction: 2010, operating hours: 75,000 h, functionality: fully functional, 55 kW compressor with built-in dryer and frequency inverter. Very good condition. After service. 3 months warranty. Nwjdov Rmmmepfx Anfof

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. Nedpfx Ajwlp Hdjnfswf We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: used, functionality: fully functional, An industrial air compressor is a machine used to increase the pressure and flow of compressed air to power various industrial tools, equipment and processes. Nwodpfxjwnxzie Anfsf

Condition: excellent (used), Year of construction: 2013, operating hours: 68,578 h, functionality: fully functional, Atlas Copco GA30VSDFF Screw Compressor Nsdpfxjyzftfe Anfswf Integrated inverter and dryer. 30 kW 12.80 bar 5.58 m³/min Year of manufacture: 2013 Operating hours: 68,578

Condition: excellent (used), Year of construction: 2011, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF S/N: API431056 YEAR: 2011 POWER (kW): 30 CAPACITY (m3/min): 5.58 PRESSURE (bar): 12.80 OPERATING HOURS (DOC/TOTAL): 33,313 FREQUENCY INVERTER: yes Nodpfsylyz Dox Anfjwf INTEGRATED DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLAS COPCO MODEL: GA30VSDFF PLUS S/N: API830397 Year: 2016 Power (kW): 30 Output (m3/min): 5.84 Pressure (bar): 12.75 Nwjdpjyh Ugksfx Anfjf Operating hours (documented/total): Frequency inverter: yes Built-in dryer: yes, R410a 1.1kg

Condition: excellent (used), - 30kW engine Nsdpfxjwlcq Nj Anfswf - built-in dryer - Max. working pressure 7.5 bar

Condition: good (used), Year of construction: 2023, functionality: fully functional, Screw Compressor Make: Atlas Copco Model: GA5VSD+ FF Year: 2023 Technical Specifications Manufacturer: Atlas Copco Model: GA 5VSD+ FF (with integrated refrigeration dryer) Year of manufacture: 2023 Nsdpjyylqnsfx Anfswf Design: Floor-mounted Control: Elektronikon Max. operating pressure: 12.75 bar Motor speed: 4,500 rpm Rated power: 5.5 kW Dimensions: approx. L 1.2 x W 0.70 x H 1.40 m + additional air receiver Weight: approx. 270 kg + additional air receiver Features - Includes 250-liter compressed air receiver, up to 11 bar - Oil-injected screw compressor with variable speed drive (VSD+), automatically adjusts motor speed to air demand for high energy savings - "FF" denotes "Full Feature": compressor is equipped with an integrated refrigeration dryer - Cooling system: air-cooled - Integrated refrigeration dryer ensures dry compressed air directly after the compressor - iPM motor: Highly efficient (permanent magnet), increases overall efficiency All information subject to change and without guarantee. A powered demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 2015, operating hours: 67,772 h, functionality: fully functional, Screw compressor Atlas Copco GA37VSD+FF. 37 kW with 13 bar, 6.55 m3/min. Integrated inverter and dryer. Year of manufacture: 2015 Operating hours: 67,772 Nwjdpfx Anoyilkcofsf

Condition: like new (used), Year of construction: 2021, operating hours: 25,495 h, functionality: fully functional, Screw compressor Atlas Copco GA160VSD+FF. Integrated dryer and frequency converter. 160 kW, 8.3 bar, 33.10 m³/min. Year of manufacture: 2021. Operating hours: 25,495. Nwedpeyzg Eisfx Anfjf

Condition: like new (used), Year of construction: 2021, operating hours: 23,369 h, functionality: fully functional, Screw Compressor Atlas Copco GA160VSD+FF Premium Inverter and dryer integrated. Nwodpfx Ansyzgtyefjf 160 kW 8.30 bar 33.10 m3/min Year of manufacture: 2021 Operating hours: 23,369

Condition: excellent (used), Year of construction: 2021, operating hours: 2,380 h, functionality: fully functional, overall weight: 268 kg, total length: 1,100 mm, total width: 650 mm, total height: 1,450 mm, power: 5.5 kW (7.48 HP), pressure (max.): 12.75 bar, Equipment: refrigerant dryer, type plate available, Atlas Copco GA5 VSD + FF oil-injected screw compressor with approx. 5 kW output, max. 12.75 bar pressure and approx. 1.1 m³ of compressed air per minute, including air dryer and separate 500-litre storage tank (pressure tank), manufactured by OKS, both built in 2021, and a condensate pump. The unit was used for only approx. 3.5 years in a bakery for simple pneumatic applications and for cleaning purposes, approx. 2,380 operating hours, 96% of which were in the 40–60% speed range; first commissioned: August 2021 (was only used regularly until around May 2024). Original price of the system excluding installation: approx. €12,000 net. This screw compressor is one of Atlas Copco’s most energy-efficient compressors, the first choice for low lifecycle costs. VSD (Variable Speed Drive) technology automatically regulates the motor speed based on actual compressed air demand, enabling energy savings of 35–60% on average compared to fixed-speed compressors, depending on the compressed air consumption profile. Very good condition, see also photos. Available immediately. Nwjdpeyvtxxsfx Anfsf Price: € 6,950 net ex-warehouse

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Nedpeym Rqfofx Anfowf Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 500 kg External reference: Pieper – Lot 55