Used Atos for sale (393)

Condition: excellent (used), Here we offer a GRIESER tripod dissolver laboratory. Product: Grieser laboratory tripod dissolver Type: GFD 11 LST Purpose: The machine is designed for mixing of powdery solids, liquids and pastes as well as to the work of fillers. The viscosity range can be from low viscosity to Pasty range. Machine design: The laboratory stand dissolver consists of machine frame, the Lifting device, the drive for mixing tool, the telescopic hood with Spring contact pressure, the Collet and the control panel (non-ex) with control and compact controller. The container (customer) and the telescopic hood form one in working position closed mixing room. The hood is intended, a hose connection It is used according to the purpose. The drive of the mixing tool with a speed adjustment is by means of Frequency converter fitted. The arrangement, performance and speed of the Motors are indicated in the enclosed drawing of the project. On the display of the compact controller can the speed of the mixing tool, the Hsdpfxed Edm Se Abdei Mixing time / mixing time, mixing sequences, as well as other functions are displayed be. Operation Switching on and off is done via corresponding buttons in the control cabinet Lifting of the mixing tool drive Lifting is carried out of the hub motor is switched on. This runs only as long as the Push button (2-hand safety circuit on-on) is pressed. After releasing the button

Condition: excellent (used), Here we offer an ICS system. Flow rate range: 0.000 to 10.000 ml/min (analysis); 0.000 to 3.000 ml/min (capillary). Flow rate accuracy: < 0.1 %. Flow rate precision: < 0.1 %. Gradient dosing accuracy and precision: ± 0.5 % at 2 ml/min (analysis only) Pressure range: 0 to 35 MPa (0 to 5,000 psi) (analysis); 0 to 41 MPa (0 to 6,000 psi) (capillary) Dimensions (H x W x D): 14 x 8.25 x 19 in. (36 x 21 x 48 cm) Weight: 55 lb. (24.1 kg) (ICS-5000) Power supply: 9 to 265 V AC, 47 to 63 Hz The system consists of the following components: ICS-5000 plus Dual Pump 6Port Valve MXP9900-000 AFC-3000 Automated Fraction Collector RFC-10 Controller Condition: used / used Scope of delivery: (See pictures as shown) Hjdpfjhh Ibtsx Abdei (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), EA Electric Automatic Type: EA-EL 9080-200 Hedeuv Ewropfx Abdsi EA Elektro-Automatic Electronic Load (2,4KW) 0-80V 0-200A Technical data: Mains input: Mains voltage 115V/20V switchable Mains frequency 50/60Hz Mains fuse T2.5A DC input: Input voltage U rated 0...80V Input power P rated 0...2400W, with temperature-dependent derating Continuous power 1500W at 20°C environment Input current I rated 0...200A Overvoltage protection limit 1.1 * U rated Maximum permissible input voltage 100V Voltage regulation: Setting range 0...80V Resolution display 100mV accuracy

Condition: used, GRIESER Type: VPL 3.0 Total volume of mixing chamber 3.0 liters Usable volume 0.3 to 2.0 liters Pressure in mixing chamber 0 to 1.2 abs. Pressure in stainless steel double jacket: N/A Hjdpfov E I N Eox Abdji Critical speed 1800 rpm Speed range under load Blade mixing tool 38-282 rpm Scraper 9-90 rpm Rated voltage: 3/PE/50Hz, 400V L/PE/N/50Hz, 230V Control voltage: 24V DC Power: 1.3KW Rated current: 5.0A Main switch: 32A Fuse: 16A Weight: 250 kg Sold ex location! Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), EA Elektro Automatik Model: EA-PS 8080-170 3U EA Elektro-Automatik EA-PS 8080-170 3U 19" Rack – Laboratory Power Supply 0-80V / 0-170A, 5000W For sale is a high-quality programmable laboratory DC power supply from the renowned manufacturer EA Elektro-Automatik GmbH & Co. KG. Hsdpfxow S T Rls Abdei This is the EA-PS 8080-170 3U model with an output power of up to 5000 W. Key features: - Autoranging (flexible combination of V/A up to maximum power) - Remote sense (up to 2.5 V compensation) - Low ripple: < 10 mV RMS / < 100 mV pp - Multiple interfaces for external control: USB, RS-232, CAN, LAN (Ethernet), GPIB (IEEE488), Profibus - Analog control (0–5 V / 0–10 V) - Fan-cooled, robust industrial design Technical data: - Output voltage: 0 … 80 V DC - Output current: 0 … 170 A - Maximum power: 5 kW - Construction: 19" rackmount, 3U - Efficiency: approx. 93% - Weight: approx. 20 kg Scope of delivery (see photo): - EA-PS 8080-170 3U power supply - Power cable (Specifications and technical details subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Hsdpfx Aod Nfq Iebdei Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), Mettler Toledo Type: TGA/DSC 1 STAR® Description For sale is a METTLER TOLEDO TGA/DSC 1 STAR® system, a high-quality and precise laboratory instrument for thermal analysis of materials. The device combines thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) in a single system, making it ideal for applications in industry, research, materials testing, and quality assurance. Features & Applications - Thermogravimetric analysis (mass changes) Hsdpfxex H R Uro Abdji - DSC analysis (heat flow, melting points, Tg) - Analysis of plastics, polymers, chemicals, pharmaceuticals, and materials - Temperature- and time-dependent measurements - High precision and stability - Network and PC-connectable (STAR® system) Technical Data (approx.): - Dimensions: approx. 500 × 500 × 600 mm - Manufacturer: METTLER TOLEDO - Model: TGA/DSC 1 STAR® - Sensor type: SDTA FRS2 - Power supply: 100–240 V / 50–60 Hz - Power consumption: approx. 300–600 W - Weight: approx. 35–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and correction!) Please feel free to contact us by phone for further questions.

Condition: new, Year of construction: 2026, The ERBA Vibratory Finishing Bell TAM 220 is perfectly suited for surface finishing of very small, thin, or delicate parts, but is also ideal for movable and solid components such as chains. It is equipped with a frequency inverter for stepless adjustment of the motor speed, a digital process timer, and a dosing pump. Thanks to variable speed control, the machine delivers the required precision and is particularly suitable for extended processing times without operator intervention. Technical specifications: - Gross volume: 220 L - Motor power: 2.2 kW - Weight: 475 kg - Motor speed: 0 to 45 rpm Hjdpfxex Ebyyo Abdsi As an experienced partner, we provide expertise in all aspects of vibratory finishing. We collaborate with you to develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory value-added tax and shipping costs. Accessories shown in the images may be optional and subject to additional charges. If you are interested, we look forward to your enquiry. We will be happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, during which we will also inform you of our general terms and conditions including our legal notice and the right of withdrawal, before the purchase/contract conclusion takes place.

Condition: new, Year of construction: 2026, The EVP-RA 550 vibratory finishing machine from ERBA features a rising process channel floor with integrated separation facility. It is equipped with an easily interchangeable screening unit and stands out for its high operational efficiency, thanks to the integrated drop step. Emptying or separation is performed via the integrated flap (manual/pneumatic). For higher load requirements, reinforced suspension and a heavy-duty motor can be fitted upon request. The motor speed can be steplessly adjusted using a frequency inverter (optional). Owing to its side discharge, the EVP-RA 550 can be linked with other machines to form a processing line. The system can also be supplied with a fully automated PLC control unit (optional). ERBA vibratory finishing systems are renowned for their durability and long service life, which is largely due to the hot cast polyurethane lining of the process chamber. Technical specifications: Hsdon Ut Uvjpfx Abdji - Gross volume: 550 liters - Channel width: 390 mm - Imbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal drum diameter: 1,400 mm As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together, we develop efficient solutions to achieve optimal process results for your application. Prices are net, excluding the currently applicable statutory VAT and shipping costs. Equipment shown in the images may include optional accessories that are available separately and subject to additional charges. If you are interested, please do not hesitate to contact us. We are happy to offer you free and non-binding consultation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. The contract negotiation takes place via telecommunication (e-mail, phone, messaging portal). As a first step, we will provide you with a non-binding offer, which will include our general terms and conditions, legal notice, and information on the right of withdrawal prior to any purchase or contract conclusion.

Condition: new, Year of construction: 2026, The ERBA Separation Conveyor YE-60 is designed for separating workpieces and grinding media. It can be used as a mobile standalone machine or in combination with other machines, such as the ERBA Turbo (centrifugal system). The separation bed can be quickly and easily replaced to suit various requirements. An optional frequency inverter can be installed, allowing stepless adjustment of the motor speed. The YE-60 can be equipped with many optional features to simplify the separation process, such as a magnetic separator for small parts, a wash nozzle, or a parts hopper. Technical Data: - Gross volume: 60 liters - Motor output: 0.3 kW - Weight: 140 kg - Screen area dimensions: 1,000 x 500 mm - Installation dimensions: 1185 x 540 x 575 mm (L x W x H) As an experienced partner, we provide you with expertise in all aspects of vibratory finishing. Together, we develop efficient solutions tailored to your optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may show the system including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to offer advice with no obligation. Hsdpfx Aen Ut N Hobdei The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, telephone, message portal). In the first step, we will send you a non-binding offer, together with information about our general terms and conditions with imprint and the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 l Description: The ERBA EVP 550 vibratory finishing machine features a flat-bottomed process bowl without an integrated separation unit. Emptying and separation are done via a manual or pneumatic bottom discharge system. Upon request, the machine can be equipped with reinforced suspension and a heavy-duty motor for increased loads. The motor speed can be infinitely adjusted via frequency inverter (optional). An optional fully-automatic PLC control system can also be installed. ERBA vibratory finishing systems are renowned for their durability and longevity, largely due to the hot-cast polyurethane lining of the process bowl. Hodpfxen Ut Tms Abdoi As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together, we develop efficient solutions to ensure optimal process results tailored to your requirements. All prices are net, plus the applicable VAT and freight charges. Accessories shown in the images may be optionally available and are subject to additional costs. If you are interested, we look forward to hearing from you. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (e-mail, telephone, message portal). As a first step, we will send you a non-binding offer, which also includes our general terms and conditions, imprint, and information on the right of withdrawal, prior to any purchase or contractual agreement.

Condition: new, Year of construction: 2026, The ERBA EVP-RA 550 vibratory finishing machine features a flat-bottom working tank with separation capabilities, designed for processing medium to large parts. It is equipped with an easily exchangeable screening unit. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously regulated using a frequency inverter (optional). Thanks to the lateral discharge, the EVP-RA 550 can be linked with other machines for integrated operation. The system can optionally be equipped with a fully automatic PLC control unit. ERBA vibratory finishing systems are known for their durability and reliability, supported by a hot-cast polyurethane lining in the working tank. Technical data: - Gross volume: 550 L Hedpfx Absn Ut Ugodei - Working channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Tank inner diameter: 1,400 mm As an experienced partner, we provide comprehensive expertise in vibratory finishing technology. Together with you, we develop efficient solutions to achieve optimal process results. Prices are net plus statutory VAT and shipping costs. Images may show the system with accessories, which are optionally available and subject to additional charges. If interested, we look forward to your inquiry. We are happy to provide you with non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which also includes our general terms and conditions, legal notice, and information about your right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 30 Hedpox Ebmyefx Abdoi Manufacturer: ERBA Power kW: 0.95 Total volume: 30 liters Description: The EVP 30 vibratory finishing machine from ERBA is ideal for processing small workpieces or as an entry-level or pilot system. It features a flat work container base without a separation unit. Discharge or separation is carried out via the bottom discharge (manual or pneumatic). The motor speed can be continuously adjusted using a frequency converter (optional). The system can also be equipped with a fully automated PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and longevity, which is also ensured by the heat-cast polyurethane lining of the work bowl. As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. All prices are net plus the currently applicable statutory VAT and shipping costs. The images may depict the machine with optional accessories, which are available at additional cost. If you are interested, we look forward to your inquiry. We are happy to provide you with independent and non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer serves solely as an online presentation of our goods. Contract negotiations take place by means of telecommunications (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, which also includes our general terms and conditions with legal notice and information on the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: ESA 15 Manufacturer: ERBA Power (kW): 3.37 Sludge basket volume: 15 L Hsdpfx Absn Utxvjdoi Description: The ERBA ESA 15 circulation centrifuge (Patent No.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It features a wastewater tank with agitator as well as a clean water tank and is capable of producing up to 600 L of fresh water per hour. Contaminant particles are separated from the process water using centrifugal force of 1500 g and removed as solid cake. The machine is easy to operate thanks to the programmable logic controller (PLC) with touchscreen interface. The ESA 15 also stands out for its compact design, making it extremely space-saving. As an experienced partner, we provide you with expertise in all areas relating to vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The stated price is net, excluding the currently applicable statutory VAT and shipping costs. Some images may show the system including optional accessories, which are available separately and may incur additional charges. The listed price refers to the base machine only. If you are interested, please do not hesitate to contact us. We will be happy to advise you, without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is for online presentation purposes only. Contract negotiations take place via telecommunication (email, phone, messaging platform). In the first instance, we will provide you with a non-binding offer, along with our general terms and conditions (including legal notice) and information about your right of withdrawal, prior to the conclusion of any purchase or contract.

Condition: new, Year of construction: 2026, The ERBA Turbo 60 is a centrifugal finishing machine for deburring, smoothing, and polishing small to medium-sized workpieces. The machine features a digital process timer, a digital speed display, and a dosing pump (wet version). The disc speed can be adjusted via a frequency inverter. The Turbo 60 is available in both wet and dry versions. It can be ideally linked with the ERBA YE-60 separation conveyor shown in the images. Technical data: - Gross volume: 60 liters - Drive power: 3.0 kW - Disc speed: 75 to 300 rpm Hsdpfsn Ut Ilsx Abdsi - Optionally equipped with tilting motor, soundproof lid, or separation box As an experienced partner, we provide you with expertise in the field of vibratory finishing. Together, we develop efficient solutions for your optimal process results. All prices are net plus the applicable VAT and shipping costs. The pictures may show the system with accessories that are available optionally and subject to additional charges. If you are interested, we look forward to hearing from you. We are happy to provide you with advice without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer is solely intended as an online presentation of our goods. The contractual negotiation takes place via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, legal notice, and the right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: YE 200 Manufacturer: ERBA Power kW: 2 x 0.3 Total volume: 200 l Description: The ERBA Separation Unit YE 200 is designed for separating workpieces from grinding media. Two motors provide the necessary movement for the sieve. The YE 200 can be used either as a standalone machine or in combination with other units, such as the ERBA Turbo (centrifugal system). The separation screen can be quickly and easily changed according to requirements. Optionally, a frequency inverter can be installed, allowing for stepless adjustment of the motor speed. As your experienced partner, we offer comprehensive expertise in vibratory finishing processes. Together with you, we develop efficient solutions to achieve optimal results for your processes. The price listed is net, plus the applicable statutory VAT and shipping costs. The images may show the unit including optional accessories that are available at extra cost. The price quoted refers to the basic machine only. The images shown are for illustrative purposes only; actual appearance and size may vary. Hodpfxex Aqvxe Abdji If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, phone, messaging portal). As a first step, we will send you a non-binding offer, which will also include our general terms and conditions, legal notice, and information on the right of withdrawal, prior to any purchase/contract conclusion.

Condition: new, Year of construction: 2026, Machine type: BPT 1000 Manufacturer: ERBA Power: 2 x 5.5 kW Total volume: 1,000 L Description: The ERBA BPT 1000 twin-motor long trough vibratory finishing machine is ideal for ball polishing or processing heavy workpieces. Thanks to its two motors, it can handle even particularly heavy media loads and applies the necessary pressure to the workpieces. It is equipped with a durable hot-cast polyurethane lining. Emptying or separation is performed via a bottom outlet (manual/pneumatic). The process chamber can be partitioned using removable dividers, allowing for individual processing of parts. The machine comes with an electrical control cabinet and can optionally be fitted with fully automatic PLC process control. The motor speed can be infinitely adjusted by means of a frequency converter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions to achieve your optimal process results. The listed price is net, plus the currently applicable statutory VAT and freight costs. The pictures may show the system including optional accessories, which are available at additional cost. The quoted price refers to the base machine. The photos are for illustrative purposes. Actual appearance and size may differ from the images. Hodpfx Asx Ebrvobdoi If you are interested, we look forward to hearing from you. We are happy to provide you with a consultation, with no obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer is for presentation purposes only. Contract negotiations take place via telecommunication (Email, phone, messaging portal). Initially, we will send you a non-binding quote, along with our general terms and conditions including imprint and information on the right of withdrawal, before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine Type: EVT 80 Manufacturer: ERBA Power kW: 0.75 Total volume: 80 L Description: The EVT 80 long-tank vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Emptying and separation are carried out via bottom discharge (manual/pneumatic). Removable dividers allow the process tank to be partitioned into compartments for individual processing of parts. The machine is fitted with an electrical control cabinet and can be optionally equipped with a fully automatic PLC process control system. For higher loads, reinforced suspension and a strengthened motor can be installed upon request. The motor speed can be continuously adjusted by means of a frequency inverter (optional). As an experienced partner, we provide expert knowledge in the field of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. Hsdpox Aqxgefx Abdji The price indicated is net, plus the applicable statutory VAT and shipping costs. Accessories shown in the images may be optional and subject to an additional charge. The price quoted refers to the basic machine. The photos are sample images—the actual appearance and size may differ from those pictured. If you are interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR). This listing is for presentation purposes only. The contract negotiation is conducted via telecommunication (email, phone, messaging platform). In the first step, we will send you a non-binding offer, along with our general terms and conditions, legal notice, and revocation instructions before any sale or contract conclusion takes place.

Condition: new, Year of construction: 2026, Machine type: Turbo 20 Manufacturer: ERBA Power kW: 1.1 Total volume: 20 L Description: The ERBA Turbo 20 is a centrifugal finishing system designed for deburring, smoothing, and polishing small to medium-sized workpieces with short process times. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency inverter. The Turbo 20 is available in both dry and wet versions. It can be integrated into a production line with a separation section. As an experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. The listed price is net, plus the currently applicable VAT and freight costs. Hodpfxex Aqykj Abdji The images may include accessories that are optionally available and subject to an additional charge. The stated price refers to the base machine. Photos are for reference only; actual appearance and size may differ from the images. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging portal). In the first step, we will send you a non-binding offer, which includes information about our general terms and conditions, imprint, and the right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: Turbo 8 Manufacturer: ERBA Power kW: 0.37 Total volume: 8 l Description: The ERBA Turbo 8 is an entry-level centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces in a short process time. The machine is equipped with a digital process timer and a digital speed display. The disc speed can be adjusted via a frequency converter. The Turbo 8 is available in both dry and wet versions. As your experienced partner, we provide comprehensive expertise in the field of vibratory finishing. Together with you, we develop efficient solutions to achieve optimal process results. Hodjx Ebqlepfx Abdji The stated price is net, plus applicable statutory VAT and freight costs. The system may be shown in the pictures with accessories that are optionally available and subject to additional costs. The stated price refers to the base machine only. The photos serve as examples. The actual appearance and dimensions may differ from those shown. If you are interested, please feel free to contact us. We are happy to provide you with non-binding advice. The European Commission provides a platform for online dispute resolution (ODR). This offer serves exclusively as an online presentation of our products. Contractual negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, providing you with our general terms and conditions (including company imprint) and revocation policy before a purchase or contract is concluded.

Condition: new, Year of construction: 2026, The ERBA Turbo 120 is a centrifugal finishing machine designed for deburring, smoothing, and polishing small to medium-sized workpieces. The machine is equipped with a digital process timer, a digital speed display, and a dosing pump (wet version). The plate rotation speed can be adjusted via frequency converter. The machine also features a tilting motor for unloading. The Turbo 120 is available in both dry and wet configurations. Technical data: - Gross volume: 130 L - Drive power: 4.0 kW - Plate speed: 80 to 170 rpm Hedpfjx Aq E Tox Abdoi - Optionally available with sound insulation cover, separation deck, or separation box As an experienced partner, we provide expertise in all aspects of mass finishing. Together with you, we develop efficient solutions to achieve optimal process results. All prices are net, plus the currently applicable statutory VAT and shipping costs. The images may show the machine including accessories that are optionally available and subject to additional charges. If you are interested, we look forward to your enquiry. We are happy to provide you with advice free of charge and without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This listing serves only as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, which will also include our general terms and conditions with imprint and information on the right of withdrawal, before any purchase or contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVT 400 Manufacturer: ERBA Hedpfx Aox Ag Iwobdsi Power kW: 4.0 Total volume: 400 liters Description: The EVT 400 long trough vibratory finishing machine from ERBA features a robust, hot-cast polyurethane lining. Discharge or separation is carried out via a bottom drain (manual/pneumatic). Removable dividers allow the work tank to be partitioned into compartments for individual processing of parts. The machine is equipped with an electrical control cabinet and can be optionally fitted with a fully automatic PLC process control system. Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via frequency inverter (optional). As an experienced partner, we provide expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and freight costs. The photos may show the system including accessories, which are optionally available and subject to additional costs. The quoted price refers to the base machine. The photos are for illustration purposes only. The actual appearance and dimensions may differ from those shown. If you are interested, we look forward to your inquiry. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely to present our goods. Contract negotiations are conducted via telecommunication (email, phone, messaging platform). The first step will be to send you a non-binding offer, which will also include information about our general terms and conditions, legal notice, and right of withdrawal before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP-RA 1700 Manufacturer: ERBA Power kW: 11 Total volume: 1,750 l The EVP-RA 1700 vibratory finishing machine from ERBA is equipped with a rising process bowl floor with integrated separation. It features an easily replaceable screening unit and an electrical control cabinet. Fully automatic PLC process control is available as an option. The machine offers high operational efficiency thanks to its integrated drop step. The emptying and/or separation process is carried out via the integrated flap (manual/pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be adjusted steplessly via frequency inverter. The EVP-RA 1700 can be linked with other machines via its side discharge. Hjdpfx Abex Ag T Tjdsi As an experienced partner, we provide expert advice on all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net, plus the currently applicable statutory VAT and shipping costs. The images may show the system including optional accessories which are available separately and may incur additional costs. The listed price refers to the base machine. The photos are for illustration purposes only; actual appearance and size may differ from the images. If you are interested, we look forward to your inquiry. We are happy to provide you with professional and non-binding advice. The European Commission provides a platform for extrajudicial online dispute resolution (OS platform). This offer serves exclusively to present our products. Contract negotiations are concluded via telecommunications (email, telephone, messaging portal). As a first step, we will send you a non-binding offer, in which we will also inform you of our general terms and conditions, legal notice, and right of withdrawal before any purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVT 130 Manufacturer: ERBA Power kW: 1.1 Hodpox Ag Hyofx Abdei Total capacity: 130 l Description: The EVT 130 long trough vibratory finishing machine from ERBA is equipped with a durable, hot-cast polyurethane lining. Discharge or separation is performed via a bottom discharge (manual/pneumatic). The working tank can be subdivided into compartments with the use of partition plates, allowing for individual processing of parts. The machine features an electrical control cabinet and can optionally be equipped with a fully automatic PLC process control system. On request, reinforced suspension and a more powerful motor can be installed to accommodate higher loads. The motor speed can be infinitely adjusted via a frequency inverter (optional). As an experienced partner, we offer you expertise in all aspects of vibratory finishing. We work with you to develop efficient solutions for your optimal process results. The stated price is net, plus the currently applicable statutory VAT and plus freight costs. The images may show the machine with accessories, which are optionally available and subject to additional charges. The stated price refers to the basic machine. The pictures are sample photos; actual appearance and dimensions may differ from the images. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (OS platform). This offer solely serves to present our goods. Contract negotiations are concluded via telecommunication (email, telephone, message portal). Initially, we send you a non-binding offer, along with information on our general terms and conditions including legal notice and right of withdrawal, before a purchase/contract is concluded.

Condition: new, Year of construction: 2026, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat working tank bottom without separation. It is ideally suited for larger and heavier workpieces. Emptying and/or separation is performed via bottom discharge (manual/pneumatic). Upon request, the machine can be equipped with reinforced suspension and a reinforced motor for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). The system can also be equipped with fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also due to the hot-cast polyurethane lining of the working tank. As an experienced partner, we offer expertise in all aspects of vibratory finishing. Together with you, we develop efficient solutions for optimal process results. The stated price is net plus the currently valid statutory VAT and plus freight costs. Items shown in pictures may include accessories that are optionally available and subject to additional charges. The quoted price refers to the base machine. If you are interested, we look forward to hearing from you. We are happy to advise you without obligation. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are concluded via telecommunication (email, telephone, messaging portal). In the first step, we will provide you with a non-binding offer, along with information on our general terms and conditions including imprint and the right of withdrawal, before any purchase/contract conclusion occurs. Hjdpon Ut T Ajfx Abdei