Used Atv for sale (71)

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Gkodpjyfu N Ajfx Aqisa Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Gkodpfx Aqjyfvwbjiea Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Year of construction: 2024, operating hours: 10 h, condition: excellent (used), functionality: fully functional, load capacity: 3,000 kg, machine/vehicle number: 0000, Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum has a load capacity of 3,000 [kg]. Type ATV-Q-3-3x3, brand Tiger Hebezeuge. The crossbeam has been used only a few times and a maximum of 500 kg has been lifted with it. It shows only minimal signs of wear. See photos. Gkodpfx Aqezn Raueisa Purchased in June 2024. The new price is €6,100.00 plus 19% VAT and shipping costs (approx. €380). Selling because it is no longer needed. Please contact me if you have any questions. Description according to the manufacturer: Aluminum crossbeam with 4 swivel lifting hooks - H-shaped crossbeams made of aluminum. Product features: Type: ATV-Q-3-3x3 Load capacity: 3,000 [kg] Hook spacing: 420-3,000 [mm] Hook spacing, cross profile: 400-3,000 [mm] Aluminum load beam for crane operation Lightweight crane crossbeam in H-shape made of aluminum Suspension for single hooks, DIN 15401 With four adjustable safety lifting hooks (rotatable by 360° under load) With a quick-release system to quickly adjust the lifting hooks a) on the main profile in a grid of 50 mm b) on the cross profile in a grid of 50 mm All parts are made of either aluminum or polyamide (with the exception of the bolts and suspension hooks) The two cross profiles can be removed from the main profile Surface: plain Product description: Aluminum crossbeam ATV-Q with 4 swivel lifting hooks, adjustable - The lightweight H-shaped crossbeam made of aluminum. This aluminum crossbeam in H-shape consists of a main beam and 2 cross beams. The crane crossbeam can not only be adjusted in many ways but also easily disassembled. This simplifies transport and saves space if the crossbeam is not needed. The load-bearing devices have a type plate with manufacturer, load capacity, weight and type number, as well as a QR code with access to the EC declaration of conformity. Safety note: Note on the safe storage of crossbeams According to DGUV rule 109-017, chapter 7.5, load-bearing devices must be placed or laid down in such a way that they cannot tip over, fall or slide off.

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 Gjdpfx Aqjvc Avbsieka tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, fuel type: gasoline, color: blue, mileage: 8,323 km, operation weight: 319 kg, Equipment: lighting, Snowmobile: Gkodpfx Ajq Tp Aqjqija - Yamaha - VK 540 III Proaction Plus - 8.3223 Km - 2 cylinder 2-stroke engine (535ccm) - Year of construction 2001 - Lighting system - 2-seater - Automatic (2x forward; 1x reverse) - Luggage rack front and rear - Wind deflector - Year of construction 2001 - 319Kg - 315cm x 113cm x 135cm (lxwxh) - Electric and manual starter

Condition: new, Year of construction: 2025, 3-seater - Engine: 2 cylinders, 4-stroke, water-cooled, displacement: 650 cc, power: 35 kW (47.6 hp) and more. Gksdpsv I Uaijfx Aqisa

Condition: used, functionality: fully functional, Year of construction: 2008, power: 11.3 kW (15.36 HP), Equipment: trailer coupling, JOHN DEERE GATOR 6x4D Year: 2008 11.3 kW diesel 512 kg 32 km/h Godpfx Asy N Uxteqijka - All-wheel drive (6x4) - Differential lock - Electric tipper - 3 axles - Good tyres - Lighting system - Immediately operational - Original paint - No documents and not road-legal Sale price: 6,950,-- net Affordable delivery available!

Condition: used, Film Packaging Machine, Bagging Machine, Vertical Form-Fill-Seal (VFFS) Packaging Machine, Hastamat R 250, Used Machine Manufacturer: Hastamat Verpackungstechnik GmbH Model: R 250 Year of Manufacture: 1999 Power: 5 kW Supply Voltage: 230/400 V, 50 Hz (requires a 3-phase industrial power supply) Bag Width: 70–250 mm Gkodjzktxlspfx Aqisa Bag Length: 100–400 mm Capacity: Up to 160 bags/minute Overall Dimensions: Width: 2600 mm Depth: 1780 mm Height: 2500 mm

Condition: as good as new (ex-display), SK 60 chuck Length: 310 mm Diameter: 170 mm Unused 3 pieces available Gkjdpfx Aqob Tyv Isija

Condition: new, Year of construction: 2026, Z-MaT VT-600M, Vertical CNC Lathe (Series: 320-1000mm Turning Diameter) Siemens 828D Shop Turn Control, 15" Touchscreen Gksdpfx Aowprtbeqiea C-axis with Hydraulic Brake, Driven Tools Fanuc Control Optional Max. Swing Diameter: 750 mm Max. Turning Diameter: 600 mm Max. Turning Height: 600 mm Spindle Motor: 15/18.5 kW Spindle Nose: A2-11 Max. Spindle Speed: 2,500 rpm 3-jaw Hydraulic Chuck without Through-hole, 610 mm Turret Type: BMT 65 Number of Tool Stations: 12, driven Drive Power: 4.5 kW Max. Rotational Speed: 4,000 rpm C-axis (Spindle) Indexing: 0.001" Rapid Traverse (X-axis): 16 m/min Rapid Traverse (Z-axis): 16 m/min Vertical Travel (Z-axis): 600 mm Horizontal Travel (X-axis): 450 mm Machine Dimensions: 2150 W x 3450 D x 3300 H mm Net Weight: approx. 10,200 kg Standard Accessories Full Enclosure Splash Guard Electronic Handwheel Coolant System Electrical Cabinet Heat Exchanger Coolant Wash Gun / Air Gun Automatic Lubrication System LED Work Light 3-Color Status Beacon Leveling Bolts and Blocks Tools and Toolbox Operating Manual Rear Chip Conveyor with Chip Cart RS232 Interface CE Certificate

Condition: good (used), Year of construction: 1996, Used capper was part of a carbonated drink and water line working in good condition Gkedpfx Aqevtpt Isiea

Condition: new, Year of construction: 2021, functionality: fully functional, V-motion classic vacuum lifting device with slewing jibLoad capacity: 250 kg Overall height: 3.8 m Lower edge of jib: approx. 3 m Reach / Outreach: 4 m Slewing range: 250° Suitable for horizontal and vertical material handling. Excellent for commercially available flat sheets and panels (MDF from 8 mm thickness). A pneumatic tilting device supports the operation of the unit. The tilting range is within 90°. Gkedpfxsy R D His Aqija The vacuum is generated by an ejector using pneumatics. Details: - Lifting speed: chain hoist, 0–10 m/min - Lifting height: 2 m - Chain length: 3.5 m - Operating pressure: 7 bar (filtered compressed air required) - Air consumption: 11 Nl/s

Condition: good (used), 50-position filler with crown cap closure. Used in a winery for filling wine into 1L glass bottles Gedpfevq Suisx Aqioka

Condition: used, Year of construction: 1998, x-travel 6000 mm y-travel 4000 mm z-travel 1250 mm w-axis 1500 mm Control Fidia max. workpiece weight 60000 kg Gkjdpfx Aqeu I E Emeioa Control unit for tool magazine/tool changer Siemens turning speeds 6,3 - 4000 U/min surface area 2500 x 4500 mm 48 St. tool taper SK50 daylight between the side columns 3700 mm rapid traverse 30000 m/min total power requirement 63 kW weight of the machine ca. 150 t required space 16,8 x 10,3 x 7,9 m

Condition: used, empty load weight: 10,920 kg, maximum load weight: 27,080 kg, overall weight: 38,000 kg, first registration: 05/2017, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Chereau deep-freeze semi-trailer with Thermo King SLXi 200, model "Fleischer" - Refrigeration unit: Thermo King SLXi 200 - "Fleischer" model - Electrical system - Dimensions (L x W x H): 13.40 x 2.48 x 2.62 m - Disc brakes - Temperature recorder - BPW axles - FRC/ATP tires: 385/65/22.5 - Pallet box Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Gsdpszrpb Eefx Aqioka Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine Godsy Dvlqepfx Aqieka - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, empty load weight: 10,920 kg, maximum load weight: 27,080 kg, overall weight: 38,000 kg, first registration: 05/2017, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,620 mm, loading space volume: 87 m³, suspension: air, tire size: 385/65R22,5, color: white, gearing type: other, front tire size: 385/65R22,5, rear tire size: 385/65R22,5, driver cabin: other, emission class: none, Equipment: ABS, cooling unit, Chereau deep-freeze semi-trailer with Thermo King SLXi 200, model "Fleischer" Gkedszp Ruhspfx Aqija - Refrigeration unit: Thermo King SLXi 200 - "Fleischer" model - Electrical system - Dimensions (L x W x H): 13.40 x 2.48 x 2.62 m - Disc brakes - Temperature recorder - BPW axles - FRC/ATP tires: 385/65/22.5 - Pallet box Very good condition, export price. Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales extend beyond national borders, which is why you will always find the export price in our listings, as this is independent of the location of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures that it is updated regularly. This information is to be regarded as non-binding general information and does not replace detailed individual advice when making a purchase decision. Only the provisions contained in the purchase contract are decisive. Subject to change, errors, typos and prior sale. Our general terms and conditions apply exclusively. Languages: - We speak English - On parle français - Мы говорим по-русски - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Telemecanique, Variable Speed Drive Altivar 16 with digital keypad/display -Type: ATV16U29M2 -Power: 1.5 kW -Input: 208/240V - 50/60Hz -Output: 3 Ph : 208/230 V -Frequency: 0.1-200 Hz -Display: Type Dimensions: 210/180/H145 mm Gkjdpfx Aezkr Sdoqisa -Weight: 3.1 kg

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive, inverter -Manufacturer: Telemecanique, Variable Speed Drive Altivar 16 frequency converter -Type: ATV16U29M2 -Power: 1.5 kW -Input: 208/240V - 50/60Hz -Output: 3 Ph : 208/230 V -Frequency: 0.1-200 Hz -Number: 2x inverters available -Price: per piece -Dimensions: 210/180/H145 mm Gkodpfx Aszkr Hnoqiea -Weight: 3.0 kg

Condition: new, Number of sanding units 2 St. sanding width 100,150 mm Sanding height max. , B Roba Twin Flat ----- Bench-mounted brush belt sanding unit for fine wood sanding and intermediate lacquer sanding. The machine utilizes two brush belt sanding units, with the sanding mechanism of the right and left units each facing outwards. This prevents—particularly during intermediate lacquer sanding— the risk of sanding through the edges. Two support rollers are located between the two units, facilitating the handling of long workpieces. Machine configuration: 1 Welded steel base frame 1 Work table – dimensions: 3100 mm x 600 mm x 850 mm 2 Brush belt sanding units Two sanding zones, each featuring 122 sanding segments that are easily replaceable via a plug-in system. Available abrasive trim heights: 30 / 45 / 60 / 75 mm (Machine supplied with initial abrasive setup Gjdpfszqvnvsx Aqioka according to customer specifications) Drive via geared motor: 2 x 1.1 kW Working width of sanding zone 1: 100 mm Working width of sanding zone 2: 150 mm Working length of sanding belt: approx. 2 x 1150 mm Sanding zone integrated into the table. Sanding belt speed: 60 m/min – 230 m/min, electronically continuously variable. Extraction ports: 3 x 100 mm Equipment features: Central control and switch cabinet IP 54 rated. Electrical components: Klöckner Möller Geared motors: Getriebebau Nord Frequency converters: Schneider Electric Connected load: 3.0 kW Operating voltage: 230/400 V, 50 Hz, 3-phase/N Machine finish: RAL 7035 / RAL 5018 Standards: CE mark Working range: max. 100 mm / 150 mm Working height: 850 mm +/- 50 mm Machine length: approx. 3100 mm Machine width: approx. 600 mm Machine weight: approx. 400 kg Plus pallet for truck transport (Twin Flat): 175.00 EUR plus VAT OPTION Roba Twin Flat FR (for sashes that are already pressed): ----- See the last 3 images; price on request! (Technical data per manufacturer – subject to change/no liability assumed)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Gkodpfozpydrex Aqija Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Condition: used, Year of construction: 2019, operating hours: 333 h, Equipment: all wheel drive, Well-maintained excavator from private ownership. Low operating hours: 333 h. Not a rental machine. Comes with many accessories: * Deep dig bucket 40 cm * Trenching bucket * Hydraulically operated trenching bucket Gkedpfozn Dq Tjx Aqiea * Sifting bucket 100 cm * Deep ripper 100 cm * Root rake * Roll-over protection structure (ROPS) with roof Adjustable undercarriage Mechanical quick coupler !Private sale, VAT not shown!

Condition: good (used), Year of construction: 2021, Frequency converter, frequency inverter, drive converter, controller, variable speed drive, converter, inverter Godpfxjxlzibj Aqijka -Manufacturer: Schneider Electric, frequency converter Altivar 630 -Type: ATV630D90N4 -Power: 90 kW -Input: 380-480V / 50/60Hz / 156 A -Output: 380-480V / 0-500 Hz / 173 A -Number: 1 frequency converters available -Price: per piece -Dimensions: 800/290/325 mm -Weight: 55 kg/piece

Condition: good (used), Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station, drying container Gedpfx Aqsxu Atmoieka -Manufacturer: Helios, Drying container granulate dryer Heliostat -Granule conveyor: Vari Color Vacumat type VM 5/BS -Individual components: see photos -Quantity: 4 pieces available Price: per piece Dimensions: 930/670/H2870 mm -Weight: 123 kg/unit

Condition: used, Frequency converter, frequency converter, drive inverter, controller, variable speed drive, converter, inverter -Manufacturer: Telemecanique, variable speed drive frequency converter -Type: ATV11HU09M2E -Power: 0.37 kW -Input: 200/240V - 50/60Hz -Output: 3 Ph: 200/230 V -Frequency: 0.5-200Hz Gsdpfxsq Untko Aqioka -Dimension: 145/70/H120 mm -Weight: 0.8 kg