Used Atos for sale (412)

Year of construction: 2018, condition: ready for operation (used), Thermo Scientific Heraeus Multifuge X3R TX 750 Refrigerated Centrifuge 2018 No. 898 Max. Speed: 15,000 rpm Hfedpfx Afjyvt Efe Tsf Max. RCF: 25,155 × g Max. Capacity: 3,000 mL Max. Kinetic Energy: 62,836 Nm Year of Manufacture: 2018 Temperature Range: –20 °C to +40 °C Dimensions: 670mm x 650mm x 489mm (W x D x H) Height with lid open: 940mm Weight: approx. 125 kg You are welcome to arrange a viewing appointment. We are happy to organize low-cost shipping for you. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Sale subject to prior sale. Visit our shop to view more offers and products. All company names and trademarks mentioned belong to their respective owners and are used only for identification and description of the products. Deviations from technical data and errors in the item description may occur and are subject to change.

Condition: repair required (used), Manufacturer: Lokomo Type: G12-11 Weight: approx. 10,500 kg Hfjdpfx Aov Sz R Ajf Tef With motor, with oil unit Spindle shaft and bushing defective

Condition: used, Hydraulic Profile Bending Machine, Pipe Bending Machine LANG Type Ondomat 60 Serial No. 2589 Year of manufacture: 1970 Bending capacity max.: Ø 60 x 2 mm Pressing force: 20 tons Counterforce: 7.5 tons Maximum bending angle: 135° Tool stroke: 250 mm Maximum tool width: 125 mm External width of tool rocker: 90 mm Motor power: 18 kW Power supply: 380 Volt, 50 Hz - Hydraulic bending process with counterpressure cylinder for wrinkle-free bending - Up to 10 different bending angles in sequence via automatic indexing turret - Two-hand control panel - 1 set of bending dies Ø 30 mm, die width rocker = 78 mm, die width counterholder = 50 mm Required space (L x W x H): 2000 x 750 x 1500 mm Hodpfoyi Hrwox Af Teff Weight: approx. 2 tons Good condition

Condition: used, Year of construction: 2013, Overview  This Wirehooder was manufactured in 2013 by SICK INTERNATIONAL in Germany. The machine is available for immediate sale, as the production in the factory was stopped in 2022. The platforms for the operator are included. Technical data  Capacity: 9,000 bph to 12,000 bph Formats: Cork caps for cider and champagne glass bottles (75cl) Dimensions: L. 200 cm - W. 150 cm - H. 250 cm Scope of Delivery  Wirehooder Operator platforms Hsdpswhk Dvofx Af Tsff

Condition: used, Year of construction: 2013, Overview  This diatomaceous earth filter was manufactured in 2013 by Spadoni (Italy) and later adapted by (Spain). The mobile filtration unit is equipped with an integrated pumping and control system for fine filtration with diatomaceous earth. It is on sale because the owner upgraded to a newer model. The filter is in good condition and available immediately. Technical data Capacity: Approx. 80 hL/h Filtration system: Diatomaceous earth Tank: Pressurized stainless steel Pump 1: OBL MHBN100PP, 100 l/h capacity, 10 bar max pressure Pump 2: EBARA 2CDX/E 120/30, stainless steel liquid transfer pump Valve system: Stainless steel, precise flow control Design: Mobile filtration unit with integrated control system Hodpfjxfcc Aex Af Toff

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Package 15 PP6715 – CS6715 Brinox LEP 11 – Pharma Chromatography and CIP System New – original packaging – Factory New Manufacturer: Brinox Model: LEP 11 Version: PP6715 with CIP System CS6715 Condition: New, unused, original packaging Hfodpfxsyl Rqpo Af Tsf Description For sale is a high-quality pharmaceutical chromatography system Brinox LEP 11, consisting of the PP6715 control panel and the corresponding CS6715 CIP unit. The system is completely new, unused, and in the manufacturer's original condition. It was designed for industrial C1-INH chromatography and meets the highest GMP standards. Scope of Functions - Slurry transfer - Washing and elution processes - Transfer to pre-precipitation tanks - Gel disposal - Independent CIP loop Technical Features - Product-contacting components in stainless steel 1.4435 - Electropolished, Ra ≤ 0.8 µm - FDA-compliant sealing systems - CIP/SIP-capable - Operating pressure up to 6 bar - Temperature range up to 95°C - Fully drainable piping CIP Skid CS6715 - Stainless steel frame - Centrifugal pump - Shell-and-tube heat exchanger - Temperature control of cleaning media - Adjustable feed pressure The system is in factory-new condition with zero operating hours.

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. Hfjdpjyl Rnnofx Af Tof The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Shell-and-tube heat exchanger Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation.

Condition: excellent (used), Infrico Medcare LTF 90S Laboratory Freezer The Infrico Medcare LTF 90S is a professional ultra-low temperature freezer from the Lab-Care series by the Spanish manufacturer Infrico. It is specifically designed for use in laboratories and medical facilities to safely store samples at extremely low temperatures. Technical Features The LTF 90S is characterized by high temperature stability and precise control. According to Infrico Medcare, the LTF series offers the following standard specifications: Control: Equipped with a digital controller and an intuitive touchscreen Precision: Temperature stability is approximately ±1°C, with a uniformity of less than ±2°C Alarm System: Features visual and audible alarms for temperature deviations, sensor malfunctions, and open doors Refrigeration: Uses natural refrigerants (such as R290 in newer models) for improved energy efficiency and environmental friendliness Hygiene: The interior is often made of stainless steel AISI 304 stainless steel with rounded corners for easy cleaning Hfsdpsyk E D Uofx Af Tof The Infrico Medcare LTF 90S has a nominal capacity of 900 liters. Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: excellent (used), Teledyne Isco CombiFlash Companion/TS The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any internet connection and Microsoft Windows® Explorer. It even notifies you by email once the separation is complete. The system's advanced automation and communication features provide maximum productivity and peace of mind, allowing you to focus on other tasks while purification is in progress. The touchscreen controller allows you to operate the system locally on a clear and easy-to-read screen. The optional solvent management module controls up to four solvents online and monitors their levels, ensuring you never run out of solvent. Companion uses precision-packed RediSep® Rf columns to obtain more pure material in less time than with glass or other disposable columns. Columns from 4 g to 330 g can be quickly swapped without additional hardware, enabling easy and rapid scaling from milligrams to tens of grams of purified sample. CombiFlash Companion automatically detects the column size and programs itself with the optimal conditions for that column. To start the run, simply press "Play." Because the software is specifically designed for purification, not analysis, you can change method parameters in real time. To adjust the gradient during a run, simply click on a point in the gradient profile and drag it to the desired value to instantly modify the solvent mixture. Power supply: 100/117 V AC, 50/60 Hz; 234 V AC, 50/60 Hz Hfjdpfx Afoyk Enas Tef Dimensions: D x H x W 540 x 490 x 490 mm Weight: 27.2 kg Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: good (used), Erlab Captair Filtair 936 Fume Hood Erlab's exhaustless, filtering chemical fume hoods offer the world's most powerful filtration, guaranteeing safety and performance. A system with countless advantages, providing seamless protection throughout the laboratory and beyond. Equipped with SMART technology, an intuitive communication platform that monitors all critical fume hood performance criteria and ensures your safety at all times. Advantages Complete user protection Filtration safety: All captair filtair fume hood models comply with AFNOR NFX 15-21 1 Class II. High retention capacity for chemical vapors in the work area, guaranteed by controlled air velocity at the front and compliance with pollutant retention standards (XPX 15203, BS 7258, DIN 12927). Hedpfx Afeyk Dq Hj Tjff A sampling valve for the exhaust air allows the user to check filter saturation at any time using colorimetric test tubes (not included). The acrylic front and door protect against potential chemical splashes (fire classification, NF P92.507 standard). Ergonomics and comfort Angled front panel provides better visibility of the work area. Thoughtfully designed hand openings give the user ample freedom of movement within the work area. Cable glands for routing electrical or power cables into the work area. Optimized working position. Very low noise level (49 dBA). Transparent walls for a clear view of work processes within the work area. Easy installation / Energy savings. No exhaust duct required; a standard electrical outlet is sufficient. Direct installation in your laboratory or on an optional mobicap rolling table. Energy savings through the recycling of purified air from the unit without the consumption of heated or cooled air. Erlab/Captair fume hood Filtair 936 Connection values: 230 V, 50 Hz, 94 W Safety class 2 Air flow rate: 200 m³/h Front air inlet velocity: 0.51 m/s Filter type: S Filter 960-961 Safety class 3 Pollutant retention class: B 2 fans Analog flow meter Noise level: approx. 51 dB(A) External dimensions: 110 x 84 x 74 cm Internal dimensions: 87 x 82 x 73 cm Working chamber volume: 0.432 m³ Two access openings in the front panel Available Filters: MF and VF CE marked. Find more items – new and used – in our shop! International shipping costs on request!

Year of construction: 2002, condition: refurbished (used), Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Hjdpfjhzbi Nex Af Teff Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Year of construction: 2002, condition: refurbished (used), flame cutting gantry Hfjdpehzbi Tsfx Af Tof Brand: SATO Model: SATRONIK HD 8000 8 Oxyfuel torches (2 TRIPLEX torches) SATO control with gas console. Year 2000 Useful cutting capacity: 6,000x24,000mm

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP Unit New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6711 with associated CIP unit CS6711 Condition: New – unused – original packaging (Factory New Condition) Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, consisting of the chromatography panel PP6711 and the associated CIP unit CS6711. The system is completely new, unused, and in its original packaging. It was designed, manufactured, and delivered, but has never been installed or put into operation. This unit is designed for C1-INH chromatography and is used for controlled protein purification using sieve-bottom vessels in a GMP environment. Process Functions • Transfer of loaded QAE resin (slurry) • Washing and elution processes • Transfer of eluate to pre-precipitation vessel • Gel disposal via container station • Fully automatic CIP and SIP cleaning Technical Data • Fully CIP and SIP capable • Design pressure: –0.9 to +6 bar • Design temperature: +2°C to +95°C • Flow rate up to 10 m³/h • Adjustable slurry transfer 0.2 – 3 m³/h Design Features Hjdoyl Ndnspfx Af Toff • Product-contact parts made of stainless steel 1.4435 • Electropolished Ra ≤ 0.8 µm • FDA and EU-compliant seals • Drainable construction • Cleanroom panel with tri-clamp connection points • Magnetically monitored transfer arcs • 0.2 µm vent filter CIP Unit CS6711 • Compact stainless steel skid • Centrifugal pump • Shell-and-tube heat exchanger • Adjustable operating pressure • GMP-compliant design The system is in factory-new condition and has never been used in production.

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Hsdsu D E A Dopfx Af Teff Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: like new (used), NNP Vibratory conveyor Hedpfx Ajhpqx Hof Tsff Stainless frame and conveyor, conveyor dimensions 2500mm x 1150mm, height adjustable frame, 3Ph

Condition: like new (used), Vibratory feeder DIETZ ROLLWA ZFE (W703173) #V-25 Hfjdpoy A Eiiofx Af Tsf

Condition: used, Vibratory bowl feeder / Sorting unit / Bowl feeder / Vibratory feeder RNA Vibrating bowl, sorting unit / Screw feeding with vibratory feeder for screwdriving technology Feeding system, feeder unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Serial no.: Year of manufacture: approx. 2000 Bowl diameter bottom: 300 mm Bowl diameter top: 350 mm Bowl inner height: approx. 25 mm Sorting track width: approx. 30 mm Overall height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 rpm Mains connection: 230 Volt, 50 Hz - The feeder was used for supplying automotive blade fuses Space requirements: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear feeder / Vibratory feeder / Sorting unit Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Serial no. 00835 Year of manufacture: approx. 2000 Maximum rail length: 700 mm Useful load: approx. 1.5 to 2 kg Hsdpfx Ajuzn Nnjf Tjff Vibration frequency: 100 Hz / 6000 rpm Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Overall height with oscillating plate 145 mm Space requirements: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibration drives, control device, regulator, controller for vibratory feeders / sorting unit / bowl feeder / vibrating bowl / vibratory conveyor Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 V eff (230VAC motor operation) at 230V mains 0 ... 98 V eff (115VAC motor operation) at 115V mains Output voltage: 0...208 V (eff.) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Bowl feeder, linear feeder max. 10A adjustable Output 2: Bowl feeder, linear feeder max. 6A adjustable Total load current: 16 A eff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max. 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay OFF: 0 ... 8 sec. Power output connection: Hirschmann 7-pin - Two power outputs - Sensor amplifier with independently adjustable time stages (on/off) - Soft start (internally adjustable) - External enable input 24VDC Space requirements: L x W x H: 260 x 190 x 140 mm Weight of controller: 3.6 kg All units tested and in good condition.

Condition: good (used), Year of construction: 2015, Laboratory furnace for bending tests, 120 kW kiln, 900 °C chamber furnace 2 bending chambers Adjustable ceiling height Temperature range: max. approx. 900 °C Auxiliary heating Control cabinet PC, HP, Intel Core 2 Duo Voltage: 400 V Power: 120 kW Year of manufacture: 2015 Pre-chamber Width: 900 mm Height: 300 mm Depth: 580 mm Bending chamber Width: 520 mm Height: 115 mm Depth: 550 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Hsdpfxoxurpwj Af Tsff Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Financing through our bank is also possible. komplett-konzept.leasingo.de Hfjdpjuzhqrsfx Af Tef Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. Hfsdpou D Ariofx Af Tef The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Condition: like new (used), Used (as new) vibratory finishing machine from PERS Semi-automatic vibratory finishing line with container for separating abrasive media and workpieces. No additional separation device needed. Technical data: The machine is powered and can be inspected by appointment! Hfedpehr Rgfefx Af Tof Capacity: 140/65 l Bowl diameter: 660 mm Dimensions (LxWxH): 1,700 x 1,300 x 1,140 mm Power: 4 kW Speed: 0-160 RPM PU coating: 26 mm

Year of construction: 2020, condition: ready for operation (used), A complete digital dental laboratory with extensive spare parts inventory and KaVo 5-axis machines is available. 1) 3x 5-axis dental milling machines KaVo Everest, travel path X/Y/Z: 250mm/100mm/70mm, A-axis: 360°, B-axis: 240°, tool positions: 2, speed: 80000rpm, machine dimensions X/Y/Z: approx. 900mm/1200mm/850mm, weight: approx. 300kg. Including 3x computers, Cam2 license dongle and 3x machine tables. 2) 2x furnaces, one as spare parts storage. 3) Machine crane. 4) Saw for plastic blanks for bar separation. 5) Various blanks from zirconia to plastic. 6) Various accessories, spare parts, documentation, service case and cabinets. This is a completely functional and operational dental prosthetics manufacturing workshop. Documentation available. An on-site inspection is possible. Hedsyn Nzlspfx Af Tjff

Condition: new, functionality: fully functional, power: 5 kW (6.80 HP), fuel type: electric, empty load weight: 4,200 kg, Year of construction: 2024, filling bunker with bunker gutter bunker capacity 10.5m³ S355 / St52-3 Hfodpsuqynmefx Af Tof vibratory feeder with 10mm Hardox 450 wear plate gutter fully stress relieved annealed 2 x imbalance motors 2,5kW NEW

Condition: good (used), Abbott Cell-Dyn 3700 Hematology Analyser The Abbott CELL-DYN 3700 system is an automated multi-parameter hematology analyser designed for in vitro diagnostics in clinical laboratories. The CELL-DYN 3700 analyser , designed with its analyser as the central unit, aspirates and dilutes whole blood samples, transports and analyses the prepared dilutions and rinses liquid components in preparation for the next sample. The haematology analyser produces haematology measurements on EDTA-anticoagulated whole blood, including WBC, NEU, LYM, MONO, EOS, BASO, RBC and HGB. Item condition: used Hfedpfx Aeh Dpyxof Tsf Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), KEN 2311-HOS Laboratory washer-disinfector KEN 2311-HOS is a compact washer-disinfector. It is used for washing, disinfecting and drying (option) surgical instruments, rigid endoscopes, instruments for minor invasive procedures, anesthesiology, abdominal and tubular equipment, anesthesia and ventilation tubes, surgical shoes, as well as bottles, trays, glassware. There are several versions: single-door and double-door (pass-through) models. Pass-through machines are always preferred because the physical separation of "dirty" and "clean" areas optimizes the hygienic environment and reduces the risk of cross-infection. ■ User-friendly control panel - ensures correct operation. ■ Possibility of individual program selection. 4 programs as standard ■ Process indicator bar shows how far the program has progressed. ■ Double monitoring of temperature (EN/ISO 15883). ■ Possibility to connect 2 types of chemicals ■ Lockable lower compartment for storage of chemicals. Specifications Mains connection 3 x 400 V,N,J, 50Hz Connected load/fuse 10kW/16A Water connection Cold untreated water: 1 piece, ¾" RG, 5-30°C, 0-30°dH Water connection Hot soft water: 1 piece, ¾" RG, 30-70°C, 0-3°dH Water pressure 200-800 kPa Outlet valve Ø 50 Water quantity (approx.) per withdrawal 13-14 l Pump capacity 370 l/min Free depth 2 doors 560 mm Free depth without center plane 510 mm Free width without center plane 510 mm Noise level approx. 59-64 dBa (sound pressure) Tightness class IP 21 (not suitable for dishwasher) Height: 1740 mm Width: 600 mm Depth: 601 mm Condition: This unit was removed in working condition due to a site closure and has been stored since. It appears to be in very good condition. Unfortunately, we do not have the knowledge or instrumentation to test the unit further and Therefore, this unit is being sold as is, in the condition it is pictured here. If you would like to test or inspect this unit prior to purchase, please contact us anytime to schedule an appointment. Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! Hedpfxoiuzkms Af Tjff International shipping costs on request!