Bar automatic buy used

Identified location: Ashburn (US) (Edit)
Enter your address
or
Move
6

Bar Automatic Lathe - Multi Spindle TRAUB TB 42

More Traub Tb 42
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1970
used
number of spindles - spindle passage - mm turning length - mm Hp0w7obwc Accessories: Cross drilling unit, revolver quick drilling unit, curve etching more
6

Bar Automatic Lathe - Multi Spindle TORNOS Multideco 20-8

Grenzach-Wyhlen, GermanyGermany dealership location
6623 km
2001
used
number of spindles 8 spindle passage 20 mm turning length 80-100 mm control PNC-Deco Fanuc turning speeds 5000 U/min Dlgpyndu0 Sub-spindle 20 mm load magazine IEMCA PRA 52/33P Number of working hours h total power requirement 15 kW weight of the machine ca. 8 t equipped with: - 23 axes, 8 spindle - Chip shut Switch-on Hours: 39.000 h (with coolant device AE1058 Knoll Chip Conveyor) Serial-No: 1713 more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 198 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, never used -threading unit -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM Bbebyb0w8q -Eilgang (190° St... more
6
Cutting sizes: 6500 mm x 6500 mm. Sawblade projection: 140 mm. Main saw motor 18 kw / scoring motor 2,2 kw Main sawblade 520 x 4,8 x 60mm Scoring sawblade 200 x 4,8-5,8 x 45 mm Feed speed of saw carriage: 5-100 m/min forward, 100 m/min reverse Feed speed of programmable fence: 80 m/min (limited to 25 m/min for safety reasons) 10 grippers Max. gripper opening: 185 mm Double sided aligning roller, min/max alignable panel width: 50 / 2200 mm 5 pcs air flotation tables in the front, each 2810 x 65... more
3
pneumatic actuated automatic valves Actubar-actuator with opto-electrical signal unit bar-Switchmaster 8zlj0uyjq multiple times on stock / unused, older stock more
4

Bar Automatic Lathe - Single Spindle INDEX C29

More Index C 29
Mülheim an der Ruhr, GermanyGermany dealership location
6390 km
1976
used
spindle passage - mm Bcy8m3o9kd turning length - mm bore depth - mm Accessories: Turning sets, various tool holders, collets, feed pliers more
3
number of spindles 6 mm spindle passage 82 mm turning length 155 mm bar feed 260 mm slide stroke - longitudinal 180 mm slide stroke - cross 105 mm spindle turning speed range 89 - 556 U/min spindle motor 30 kW Crnki3z total power requirement 32 kW weight of the machine ca. 18 t dimensions of the machine ca. m 6 cross slides: 1 x swing stop, combined, 6 slides equipped with toolholders. Longitudinal slide block, equipped with 2 toolhold slides, and special tool holder with cross movemen... more
6
number of spindles 6 spindle passage 32 mm turning length 152 mm Speed 200-2800 U/min. turning diameter 32 mm feed Werkstoff: 254 mm Ogcdcc8w7 Accessories: multi edge turning, univ. thread cutting attachment, Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels more
6
"Automatic panel storage & retrieval system BARGSTEDT TLF 21 /29/15 Longitudinal traversing range mm: 29.000 Crosswise traversing range mm: 15.000 Number of rows max: 5 Places per row max: 12 Load capacity kg: 120 Infeed roller conveyor: Yes Bb3xkfo2t2 Destacking on roller table: Yes Vacuum lifter: Yes CE-mark: Yes Operating status: not connected" more


bar automa...
daily

New machines via email!

Stay updated!
2
workpiece dia. Ø 24 mm workpiece feed -automatic 75 mm thread dia. 30 mm turning speed range - spindle 27 - 3750 U/min tool turret 8 Plätze max. travel of the tool turret 70 mm total power requirement 5,5 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 2,10 x 0,85 x 1,50 m Srnyhk with 2 cross and 2 parting-off slides, with thread chaser device and multi edge turning device acc.: bar loading magazine IEMCA AS 325/32, various change gears more
5

Spraying booth, automatic BARBERAN RR B8

Heule, BelgiumBelgium dealership location
6178 km
2008
used
Automatic spraying booth Panel feed by wide metal belts with 20 mm interspace, total width 1600 mm Feedspeed 4 to 10 m/min 2dvmmmin Rotary system with 8 arms, each arm with 2 guns (2 circuits) Automatic belt cleaning and lacquer recycling (Demo machine) items included: Infeed belt Cleaning brush with blowers Spray booth Outfeed roller conveyor pumps are included pistols are not included more
6
number of spindles 6 Stück spindle passage 32 mm rated current 85 total power requirement 50 kW speeds 200 - 1160 stufenlos U/min rated capacity Antriebmotor 18,5 kW Dimensions (L,W) 3850 x1390 mm spindle turning speed range ( Bereich 1) 450 - 3150 U/min spindle turning speed range ( Bereich 2) 200 - 1400 U/min Transport dimensions 5 x 1,5 x 2,3 m total power requirement 55A/380V/50Hz weight of the machine ca. ca. 8,8 t dimensions of the machine ca. 7,50 x 2,10 x 2,60 m Retrifit 2016 - Ma... more
4
number of spindles 6 spindle passage 20 mm turning length 80 mm total power requirement 25 kW weight of the machine ca. 6,5 t Rcmxrhtbb Max. bar Ø, normal 20mm Max. bar Ø, square, hexagonal, octagonal14 / 17 / 18mm Max. bar feed80mm Stroke of longitudinal slide63 / 39.5 mm Boring depth, max.39.6mm Stroke of cross slide, max.32 / 25mm Stroke of lower cross slide40 / 26mm 49 Spindle speeds355 - 5,000rpm No. of workpiece revolutions per work cycle60 - 1.32 35 cutting times per part0.36 - 53s... more
5
Horizontal semi-automatic baler Used machine Price: 17 000 euro’s (netto price) Technical details: - Bale dimensions: 110cm x 110cm x 120-150cm - Pressure: 50 tons - The inlet size: 110 x 130cm - Engine: 15kW - Length of the machine: 6m - Width of the machine: 2.2m - Height of the machine: 3m - Wiring: 4 wires, horizontally Hlxjz9lfe - The machine works perfect - Available at any moment If you have any another questions, don’t hesitate to contact us! more
4

Automatic latch bar work SCHÜCO LA 100

Ebersbach/Fils, GermanyGermany
6687 km
2016
excellent (used)
Fast punching and were off by bolts Bar code reader for inclusion of the respective element from SchüCal Variant without barcode: dimensions manually can be grasped Animation of the hardware installation screen Automatic transport of the bolt PC control with 24 "touch-screen color display Replaceable punching tools Automatic tool recognition 1 PRS-WZ SimplySmart 1 matrix scanner FPM Hldad3cra The profile bar bar automatic Schüco LA 100 is designed for the quick calculation and manuf... more
6
"Automatic panel storage & retrieval system BARGSTEDT TLF 410 /21/12 Longitudinal traversing range mm: 21.000 Crosswise traversing range mm: 11.500 Stack height max mm: 2.100 Workpiece width max mm: 2.100 Workpiece width min mm: 800 Workpiece length max mm: 4.200 Workpiece length min mm: 200 M3277 Workpiece thickness min mm: 6 Feedrate max m/min: 70 Continuously variable feed: Yes Vacuum lifter: Yes Rotary device: Yes Adjustment to panel size: Yes Total connection kW: 9 Weight kg: 6.175 Operati... more
3
Index MS 25 05 120 Bcwckkvxje 6 spindles machine with 6 cross slides and 6 longitudinal slides Polygonal device Thread cutting attachment Spindle stop Synchronizer Magnetic conveyor Machine: 4,000 x 1,100 x 1,800 mm, about 4500-5000 kg more
6

Bar Automatic Lathe - Multi Spindle SCHÜTTE SF 32

Annaberg-Buchholz, GermanyGermany dealership location
6816 km
1982
used
number of spindles 6 Brpzpdos spindle passage 32 mm turning speeds 200 - 1160 U/min total power requirement 50 kW weight of the machine ca. 8,8 t dimensions of the machine ca. 7,50 x 2,10 x 2,60 m Retrifit - 2016 - Main and feed drive complete new - Drive belts new - Safety coupling in feed drive komplet reconditioned + new storage - Longitudinal slide completely overhauled - Cross slide completely overhauled - 6 x spindle completely new , new V-ring, 2 x new spray rings - Rotating spindle... more
6
Number of bars max.: 9 cutting capacity with 1 bar max.: 20 mm weight of the machine ca.: 6,0 t Cuts, bends and picks steel rods. Plant is applicable for use in concrete formwork, reinforce concrete, etc. Plant is specially has been constructed for this type of application area. Yvri7u7i further technical details: capacity / cutting speed: according material 20m/min feed cutting unit incl. feed bending unit equipment: - bridge with robot unit for gripping of steel rods - SPS controlled robot ... more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t Ptmhbm dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1987 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit -tool breakage control (photo:blue box on the top) never used. -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 m... more
1

- USED - AUTOMATIC BAR FEEDER IEMCA 37

Matelica (MC), ItalyItaly dealership location
7213 km
ready for operation (used)
BAR LENGTH: 3000 mm BAR DIAMETER: 52 mm PRICE: On demand Bciykyaddy more
6
"Automatic panel storage & retrieval system BARGSTEDT Longitudinal traversing range mm: 30.000 Crosswise traversing range mm: 10.000 Stack height max mm: 1.200 Infeed roller conveyor: Yes Destacking on roller table: Yes Vacuum lifter: Yes Rotary device: Yes Bct2cfbs8b Operating status: still in production use Condition: good" more
3
Number of spindles 6 Capacity round bar 42 mm Capacity square bar 30 mm Capacity hexagon bar 36 mm Max. stroke of long slide 125 mm Nfsm2 Machining rate: from 0.9 sec up to 280 sec Spindle speeds: number (steps) 49 from 140 rpm up to 2240 rpm Voltage 50 Hz 3x 380 Volt Power 22 kW Machine's weight about 10000 kg Overall dimensions machine: Length 6516 mm Width 1588 mm Height 2100 mm more
2
 Start Chat

Automatic bar Loading Magazine IEMCA MAXIS 72N

ČeskoCzech Republic
7010 km
2008
ready for operation (used)
Engine power: 0.6 kw Ptnvny Machine weight: 880 kg more
4

Automatic Bar Feeder LNS Express 326

Robassomero, ItalyItaly
6733 km
2001
excellent (used)
LNS Express 326 Dmjoisd more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle -threading unit -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm Naifl -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM -Eilgang (190° Steuerwellendrehun... more
2

- USED - AUTOMATIC BAR FEEDER IEMCA TS 560 P

Matelica (MC), ItalyItaly dealership location
7213 km
2007
ready for operation (used)
Coruprls BAR LENGTH: 4300 mm BAR DIAMETER: 5-65 mm WEIGHT: 1950 Kg PRICE: On demand more
4
Number of spindles 6 Capacity round bar 42 mm Capacity square bar 30 mm Capacity hexagon bar 36 mm Max. stroke of long slide 125 mm Machining rate: from 0.9 sec up to 280 sec Spindle speeds: number (steps) 49 from 140 rpm Bcwchbyzmz up to 2240 rpm Voltage 50 Hz 3x 220 Volt Power 22 kW Machine's weight about 10000 kg Overall dimensions machine: Length 6516 mm Width 1588 mm Height 2100 mm more
5
 Start Chat

Bar Automatic Lathe-Multi Spindle ZPS AN 6/25 Bau 1975

ČeskoCzech Republic
7010 km
1975
good (used)
Spindle passage: 25 mm Spindle number: 6 Motor power: 18 kW Machine dimensions: 3470 x 1500 x 2100 mm Bcbxgujgml Machine weight: 7500 kg more
2
Length: 5.700 Neukb Minimum height: 1.100 more
6
number of spindles 6 spindle passage 27 mm turning length 100 mm total power requirement 15 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 7 x 1,2 x 2 m multispindle turning machine INDEX MS25, built 1989 -bar diameter: 26 mm -bar feed: 100 mm -spindlestop -sub spindle, not installed, defect. -threading unit, defect, clutch? -slide way (long/movement/adjustable):80/55/330 mm -slide way (long/movement/adjustable 36/16/20 mm -spindle cyrcle 230 mm -speed range: 355 - 5000 UpM... more
1

- USED - AUTOMATIC BAR FEEDER PIETRO CUCCHI MC.CF

Matelica (MC), ItalyItaly dealership location
7213 km
1995
ready for operation (used)
BAR LENGTH: 3400 mm BAR DIAMETER: 20 mm WEIGHT: 1080 Kg OVERALL DIMENSIONS: 5000 x 600 x 1280 mm Bciyj2mshv PRICE: On demand more
6

6 spindle bar automatic Gildemeister GM20-6

More Gildemeister Gm 20
Brembate di Sopra, Bg, ItalyItaly dealership location
6844 km
refurbished (used)
- like new - M80eh2kyt completly reconditioned! Electric completly new pick-up spindle, pneumatic clamping arm for rear working auto bar loader Easy-load - new CE Declaration of Conformity more
4
- max. bar diameter 42 mm Dmjaw9d - turret with 6 stations - max. turning length 100 mm - 2 horizontal supports - 2 vertical supports - hydro feeding tube STENZEL dimensions LxWxH: - machine 2200 x 1200 x 1600 mm, weight 1800 kg - tube 5700 x 600 x 1200 mm, weight 500 kg more
6
 Start Chat

Bar Automatic Lathe-Multi Spindle ZPS AN 6/25 Bau 1997

ČeskoCzech Republic
7010 km
1997
good (used)
Spindle passage: 25 mm Spindle number: 6 Motor power: 18 kW Bcbw2alk9e Machine dimensions: 3470 x 1500 x 2100 mm Machine weight: 7500 kg more
4

6-spindle bar automatic lathe Gildemeister AS 82

Nürtingen, GermanyGermany dealership location
6677 km
1978
used
6-spindle bar automatic lathe Manufacturer: Gildemeister Type: AS 82 Built in 1978 Spindle passage: 82 mm Bar feeder: 260 mm Turning length: 155 mm Longitudinal carriage stroke: 180 mm Page carriage stroke: 105 mm Spindle speeds: 89-556 U/Min Fg0syrnxk Spindle drive: 30 KW Weight: 18,000 kg 3 units available Machines are dismantled and reverse loading ready more
6

Bar Automatic Lathe - Multi Spindle INDEX MS 36 E

Düsseldorf, GermanyGermany dealership location
6392 km
1996
used
number of spindles 6 spindle passage 36 mm turning length 125 mm total power requirement 60 kW weight of the machine ca. 11 t dimensions of the machine ca. 7070 x 1540 x 2000 mm Control: Mechanical, electrical Gripper-device: SZ 42 Bar feeder Iemca, type PRA 40/33 / P, year of construction 1996 Additional equipment: straight turning device, multi-edge turning device, thread cutting device, thread milling device Fette thread head incl. thread rolls. 3 jaw chuck for RSB, oil filter ... more
3

- USED - AUTOMATIC BAR FEEDER PIETRO CUCCHI /

Matelica (MC), ItalyItaly dealership location
7213 km
ready for operation (used)
BAR LENGTH: 3000 mm BAR DIAMETER: 42 mm Nefxz WEIGHT: 1250 Kg PRICE: On demand more
3

8-spindle bar automatic SCHÜTTE AF 32

Via B. Locatelli 62, 24030 Brembate di Sopra, Bg, ITItaly
6844 km
1989
ready for operation (used)
8-spindle bar automatic YOM 1989; series 25 Completely rebuilt in 2012 New electric New bearings Slide guides rebuilt CN slide pos. 7 Spindle stop device Stock stand and reel Swarf conveyor Hydraulic pick-up spindle pos. 8 Bbojf8v7bg Shaving device Various tool holders Various cams more
6
Barberan automatic painting line includes: Pinomatic automatic stacking of items to Pinomatic line Pinomatic conveyors Viet Valeria Challenge 333 TM (2 x sandpaper) Viet Valeria Challenge 223 TM grinder (3 x blade sanding pad, 1 sanding pad) - Berberan UV lamps (in front of the paint booth) - Barberan paint shop, two spray guns for 4 guns each. (Total of 8 pistols) Berberan drying trolley - warm air flow 12 m in length -The device transporting the components to the second Pinomatic drying tunnel... more
6
Semiautomatic column guided horizontal bandsaw Fabr PEHAKA type HS 310/500 GBS Masch 39553, built in 1999 swung to both sides Technical Data:.. Cutting area 90 approximately 310 mm 90 flat 310 x 500 mm 90 square 310 x 310 mm 75 flat + - 310 x 470 mm 60 flat + - 310 x 410 mm 45 flat + - 310 x 300 mm 45 mm 30 around 310 flat - 310 x 180 mm band speed 20 - 120 m / min. Saw-band 5800 x 34 x 1.1 mm working height 650 mm weight approx 2500 kg External dimensions 2800 x 2000 x 2250 mm with: - 2-column ... more
5
Automatic with Stangerlader Number of spindles 1 Spindle bore 25 mm RPM 550-4200 RPM Total power 2.0 kW Weight approx. 500 kg Dimensions (Lxwxh) approx. approx. 1.0 x 0.6 x 1.5 mm Y9z8lcnlb S/N 88035, hydraulic power, Star revolvers, pipe loader length 4000 mm more
2
Automatic bar loader IEMCA MASTER 880P for bars up to 80mm to 3.200mm diemeter complete with guides and spears up to 65mm. Year built 1999, "CE" mark. 7epphh9av Hydraulic bar feeder Asmut AB6 - diameters bar step 15-22-29-36-43-52mm automatic bar loader LNS MINI SPRINT for bars up to 33mm diameter. Year Built 1995 sellable machines individually or in stock more
6

6- spindle bar automatic Mori-Say TM626

Brembate di Sopra, Bg, ItalyItaly dealership location
6844 km
2009
used
5 tool spindles 2q2lqa 4 cross slide with longitudinal drive Double slide in position 6 pick-up spindle in position 6 Chip conveyor with vibration filter HD coolant Tool holder set various curves Bar loaders IEMCA PRA for 3 m rods more
6

6 spindle bar automatic Mori-Say (ZPS) TM626

Brembate di Sopra, Bg, ItalyItaly dealership location
6844 km
2009
used
5 tool spindles 4 cross slide with longitudinal drive Double slide in position 6 pick-up spindle in position 6 Chip conveyor with vibration filter high pressure coolant Tool holder set various curves Ptlzpa Bar loaders IEMCA PRA for 3 m rods more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Glvrq9odi US CONCEPT CHB-12 Hauncher/Notcher;The US CONCEPTS CHB-12 Hauncher-Notcher is designed to notch along the edge of the board or across the end. -- Typical applications: Box joints, finger joints, bee boxes, hinge notches, coping, profiling in furniture and window industries, decorative cuts, beaded frame cabinets, toe kick notches, etc. Equipped with & Spec's: -- 40 MM horizontal spindle that moves up hydraulically past the table with the clampe... more
2

Horizontal Bandsaws EVERISING 300HB Automatic Horizontal Bandsaw

Leicestershire, United KingdomUnited Kingdom dealership location
5832 km
ready for operation (used)
Gtoxmyxr more


bar automa...
daily

New machines via email!

Stay updated!

to

to

Edit search
BAR AUTOMATIC
SELL IMMEDIATELY
with Europe's market leader for as little as € 0,49 per ad.
Find out more


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close