Used Krauss Maffei for sale (219)

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm Codpsyhby Hjfx Abuspu • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Cpsdpfjyhbq Ejx Abuju Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 1998, screw diameter: 85 mm, Complete extrusion line. Individual components can also be offered on request. The line has been used for making tubes from PP filled with chalk and barium sulfate. Components: - 4 Components Colortronic dosing (new controller in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control of dosing and extruder - Single oil tempering - Stomach melting pump - Krausmaffei Extrusion head 40 to 160 mm (with various sets) - Vacuum tank Battenfeld V250VA - Spray bath K250 VA Battenfeld Cpsdpfsu Rda Iex Abueu - Pulling mechanism C250 - 4 Sica - Saw CCM 32/170-2 Roller pole - Tilting table Battenfeld

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 35 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm Cpodpfx Abjyg Hz Heuou • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Cpodpfxeyf Uy Uo Abusu Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Cpjdpfx Abew E E Evousu Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg

Year of construction: 2010, operating hours: 51,200 h, condition: ready for operation (used), screw diameter: 80 mm, This Krauss Maffei CX 650-3000 was manufactured in 2010. A robust hydraulic injection moulding machine, it features a screw diameter of 80 mm, 6 core pulls, and 6 pneumatic needle actuators. It includes an LRX 250 handling system with 4 vacuum and gripper circuits. Known defects include leaks and a non-regulating low-pressure pump. Contact us for more information about this machine. • Core pulls: 6 • Pneumatic needle actuators: 6 • Internal mold heaters: 12 • Cooling water circuits: 6 + 6 Cedpfx Aeyffcasbujpu • Operating hours: approx. 51,200 h • Pump hours: approx. 61,500 h • Known defects: • Leaks at the upper operator-side frame • Leak at the injection unit • Low-pressure pump no longer regulates accurately Additional equipment • LRX 250 handling system • 4 vacuum circuits • 4 gripper circuits

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: Csdsydnp Hjpfx Abuspu • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Year of construction: 1998, condition: good (used), Part of an old direct extrusion line for pipes (which is also still available). This machine is supplied with the following components: Cpsdpfxjx S Rime Abuou - 4-component Colortronic dosing system (new control installed in 2017) - Berstorff KMC 85/2 (screws renewed in 2019) - Sidefeeder - Complete control system for dosing and extruder - Single-circuit oil tempering - Maag melt pump

Condition: ready for operation (used), Year of construction: 2006, operating hours: 68,590 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Cpsdpsydp D Ejfx Abueu Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 6600 kg Max. mould weight 1862 kg Accessories: - Anti vibration pads - Krauss Maffei Robot LR100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0 - 90° Additional Options: - 1 x Air valve - 2 x core pull - Robot interface according to Euromap 67

Year of construction: 2016, operating hours: 32,000 h, condition: ready for operation (used), controller manufacturer: KRAUSS MAFFEI, screw diameter: 45 mm, This Krauss Maffei KME 45 XS was manufactured in 2016. It features a 45 mm screw diameter, high-performance single screw with a 36:1 L/D ratio, and operates at speeds up to 600 rpm. Designed for high-pressure extrusion, it handles thermoplastics and compounds with a throughput of 150-300 kg/h. Consider the opportunity to buy this Krauss Maffei KME 45 XS single screw extruder. Contact us for more information about this machine. • Extruder type: Single-screw • L/D ratio: approx. 36:1 (XS = high-performance series) • Screw speed: up to approx. 600 rpm • Drive: AC motor with frequency control; high-torque design for compounding • Throughput: approx. 150–300 kg/h (depending on material and screw configuration) Codpfx Absycvftsuopu • Operating pressure: High-pressure extrusion capable • Material types: Thermoplastics, compounds, masterbatch • Motor upgrade in 2023 : The original motor was replaced in 2023 to increase the torque on the screw. The replacement was carried out by Krauss ken converter (price offer available)

Condition: excellent (used), Hydraulic motor for Krauss Maffei injection molding machines. Cedpfxjx Uqv So Abuspu MOS 6500-30-168

Year of construction: 2001, condition: ready for operation (used), This Krauss Maffei 125-520 C1 was manufactured in 2001. It features a MC4 controller, Euromap Interface 12, and a screw diameter of 50 mm. With a maximum pressure of 1521 bar and an injection volume of 340 cm³, it is ideal for precision moulding tasks. Contact us for more information. Machine Benefits Technical Machine Benefits Cpodpfoyary Usx Abuju • Screw diameter: 50 mm/ max. Pressure: 1521 bar / max. Injection volume: 340 cm³ • Euromap interface: 12 / hydraulic units: 1 / air units: 1 / hot nozzle zones: 1

Year of construction: 2000, condition: ready for operation (used), This Krauss Maffei 110-520 C1 was manufactured in 2000. It features a MC4 controller, Euromap Interface 12, and a hydraulic unit. With a screw diameter of 45 mm, it offers a maximum pressure of 1878 bar and an injection volume of 275 cm³. Consider the opportunity to buy this Krauss Maffei 110-520 C1 hydraulic injection moulding machine. Contact us for more information. Additional equipment Cedpfjyaryusx Abuepu • Euromap Interface: 12 / Hydraulic Units: 1 Machine Benefits Technical Machine Benefits • Max. Pressure: 1878 bar / max. Injection volume: 275 cm³ • Hot nozzle zones: 1 / screw diameter: 45 mm

Condition: used, Krauss Maffei SE502 MC4 sequence controller- removed from KM 18 C3 - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SE502 spare part no.: 5 Cpedpfx Aorr Eh Aebueu Dition: gebraucht

Condition: used, Krauss Maffei SR 500 processor card for MC3F- for MC3F sequence control - removed from running machine - fully functionalmanufacturer: Krauss Maffei type: SR500/310 spare part number: 5 Cpedpfsrr Ehqox Abueu Dition: gebraucht

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 Cpsdpfxeppigds Abuju CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Krauss Maffei IPC 5-133 for MC4 control system- removed from KM not testedmanufacturer: Krauss Maffei Cpjdorr Egwjpfx Abusu spare part no.: 5 Dition: gebraucht

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz Cpsdpfx Ajwd Udlobuju delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 Cedpfx Aberr Efnjuepu - removed from running machine - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Cpodpjlvykxofx Abusu -Manufacturer: Krauss Maffei, heating tape heating collar -Type: Ø200 x 160 mm -Item No.: 401 7184 -Heating power: 5500 W -Voltage: 230/400V -Number: 2x heating tape available -Price per piece -Dimensions: 310/255/H160 mm -Weight: 4.0 kg

Condition: used, CNC control, control cards, MC3 control, plug-in cards, printed circuit boards, electronics housing Cpedsnch Iiopfx Abusu -Manufacturer: Krauss Maffei, control module from injection molding machine -Electronic module: HU 100 5089750 3AO63 -Electronic housing: phoenix contact type UEGM -Number: 14x module available -Dimensions: 90/25/H85 mm -Weight: 0.1 kg/pc.

Condition: good (used), Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape Cjdpfx Aslvykmsbuepu -Manufacturer: Krauss Maffei, heating tape, heating sleeve -Type: Ø240 x 135 mm -Item No.: 401 2258 -Heating power: 4200 W -Voltage: 230/400 V -Quantity: 2x heating tape available -Price: per piece -Dimensions: 290/255/H135 mm -Weight: 2.8 kg

Year of construction: 2016, operating hours: 23,497 h, condition: ready for operation (used), overall weight: 3,900 kg, total height: 2,500 mm, product length (max.): 4,700 mm, This Krauss Maffei 80–180 CX was manufactured in 2016. It features a clamping force of 800 kN and a tie bar distance of 750 mm. Equipped with a Yaskawa robot, conveyor belt, UV dryer, laser for sprue separation, and a cleaning station. Dimensions are 4700x1600x2500 mm, and it weighs approximately 3900 kg. Power supply is 400 V/50 Hz with a connected load of 15 kW. Consider the opportunity to buy this Krauss Maffei 80–180 CX hydraulic injection moulding machine. Contact us for more information. • Power Supply: 400 V / 50 Hz Cedpex Uq Nfsfx Abuspu • Connected Load: 15 kW • Current: 248 A • Screw Diameter: 30 mm • Clamping Force 800 kN • Conveyor belt • UV dryer • Laser for sprue separation • Cleaning station Dimensions Machine Depth 1600 mm

Condition: ready for operation (used), Year of construction: 2013, clamping force: 1,100 kN, total height: 470 mm, product length (max.): 470 mm, This Krauss Maffei 110-380 CX was manufactured in 2013. It features a clamping force of 1100 kN, mold opening force of 70.0 kN, and a mold opening stroke of up to 600 mm. The machine includes a robot and has internal dimensions of 470 x 470 mm. Consider the opportunity to buy this Krauss Maffei 110-380 CX hydraulic injection moulding machine. Contact us for more information. • Mold opening force: 70.0 kN Cpedpfx Aex D Ea Uebusu • Clamping plate (L x W): 745 x 770 mm • Internal dimensions (L x W): 470 x 470 mm • Mold opening stroke max: 600 mm • Mold installation height min: 300 mm • Opening width: 900 mm Additional equipment • Robot (included) • Water temperature control equipment (not included) • Conveyor belt (not included)