Used Aufteilen Sawing Plate for sale (17,250)

Condition: used, Year of construction: 1999, Miter saw Manufacturer: Hebö Type: TA 131 Year of manufacture: 1999 Technical data: Adjustable, 50 Hz 2 clamping cylinders Extended workpiece support on the right/left, each approx. 840 mm Lasdpfx Aozuym Rofwef 2 stops Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1989, Pull saw Manufacturer: Stomag Type: RS90 Year of manufacture: 1989 Technical data - Infeed roller conveyor: 3000 mm long, 400 mm wide - 4 HP motor - 3000 RPM Lajdpfezuym Dsx Afwef - Outfeed arm: 1240 mm Note: The technical data and descriptions are a transcript of the original order confirmation from that time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 2008, Automatic circular saw machine Manufacturer: Kasto Type: KASTOspeed C9 Year of manufacture: 2008 Technical data - For sawing steel and non-ferrous metals - Test machine, used very little. - Cutting direction 90°. - Saw blade diameter 250, 285 and 315 mm. - Cutting range approximately 15-90 mm or 15x15-80x80. - Power of drive motor for saw unit 11 kW (special equipment). This enables cutting speeds of 50-700 m/min, among other things. - 2 separate and independently selectable tanks for minimal lubrication. Accessories: Lasdozuymkjpfx Afwjf - Angle magazine, loading length 6000 mm. - Material trolley with drawbar. - Portal crane, maximum load 1000 kg. - Oil mist extraction system. - Chip conveyor. - Chip tipping container with rollers. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2022, - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t Panel dividing saw Manufacturer: Biesse Type: Selco WNT 630 Year of manufacture: 2022 Technical data - Work surface: 3800 x 2200 mm with rear lifting table - Maximum cutting length: 3800 mm - Saw blade overhang: 108 mm - Maximum gripper opening: 100 mm - Minimum panel size: 1830 x 915 mm - Maximum panel size: 3660 x 2200 mm - Maximum stack height: 630 mm Laodpfxjzuyl Te Afwsf - Minimum thickness on the lifting table: 10 mm - Maximum lifting table stroke: 985 mm - Load capacity of the lifting table: 5 t The machine is almost new and has only been used for a few months. Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: new, plate depth 2000 mm plate width 1500 mm plate height 300 mm weight 2385 kg dimensions of the machine ca. 2000 x 1500 x 300 mm GERD WOLFF clamping plate 2000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate for you according to your requirements. T-slot size: 48 x 28 Lsdpfx Afjyk Ih Nswsaf T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 2385 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 150 mm weight 1300 kg GERD WOLFF clamping plate 1500 x 1500 x 150 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slots - width: 45 x 22mm T-slot spacing: 250mm Number of slots: 6x6 Edge distance: 125mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III Ljdpfx Ajyk Iitofwsaf Keywords: Clamping plate, Machine table, Workpiece clamping, Fixing holes, Clamping system, Tool clamping surface, Clamping device, T-slot plate, Precision plate, Modular clamping plate, Hole system, Mounting plate, Workpiece fixation, CNC machine clamping plate, Machine base

Condition: used, length 700 mm width 500 mm height 105 mm weight 260 kg The electro-magnetic clamping plate is in good, ready-to-use Lajdpfx Aowth Trjfwjf condition. Length: 700mm Width: 500mm Height: 105mm Weight: 260kg We have two identical magnetic chucks with the same dimensions. See S9064

Condition: new, plate depth 5000 mm plate width 1500 mm plate height 300 mm weight of the machine ca. 6060 kg required space 5000 x 1500 x 300 mm GERD WOLFF clamping plate 5000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way we can manufacture a clamping plate according to your requirements. Laedsyk Iluspfx Afwof T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 6060 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: used, table length 4000 mm table width 3000 mm Laedegrnbgopfx Afwjf table height 400 mm Arrival table with linear guide and height indicator dimension Length: 4000mm Width: 3000mm

Condition: new, cutting diameter 570 mm saw band length 7250 x 41 mm cutting width 1,3 mm capacity 90 degrees: square 550 x 550 mm capacity 90 degrees: flat 550 x 700 mm total power requirement 4 kW weight of the machine ca. 6050 kg required space 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist Lodoymf Sdjpfx Afwsaf - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, plate width 4000 mm plate depth 1500 mm plate height 310 mm weight 4930 kg dimensions of the machine ca. 4000 x 1500 x 310 mm GERD WOLFF clamping plate 4000 x 1500 x 310 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 4930 kg Casting quality HT250 Flatness less than 0.12 mm Lsdpfx Afeymf T Uswjaf Surface treatment according to DIN 876 / III

Condition: new, plate width 1500 mm plate depth 1500 mm plate height 800 mm weight 2595 kg GERD WOLFF clamping cube 1500 x 1500 x 800 mm Also available in 600 mm version (H1153). The images above depict the clamping cubes with dimensions of 1500 x 1500 x 600 Lasdsymf Ulopfx Afwsf mm. Shortly, we will provide images of the 800 mm high variant, which features an additional fourth slot on the side. If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 14 Edge distance: 120 Weight: 2595 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, plate depth 2000 mm plate width 1000 mm plate height 600 mm weight 1800 kg GERD WOLFF clamping cube 2000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 1800 kg Casting quality HT250 Ljdpsymf Uxefx Afwoaf Flatness less than 0.12 mm Surface machined according to DIN 876/III Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, capacity Ø 30 - 160 mm Saw Body 30 Grad Linear Schlitten sawing motor 15 kW hydraulic motor 3 kW Saw Feeding Servo 1,5 KW Siemens Saw speed 30-120 rpm /min Lsdey Aplujpfx Afwsaf saw-blade dia. Ø480 x 2,25 x 2,7 x 50 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl weight of the machine ca. 5550 kg required space 3200 x 7600 mm Please use the contact form for price information. GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable.

Condition: new, plate depth 4000 mm plate width 2000 mm plate height 600 mm weight 6700 kg GERD WOLFF clamping cube 4000 x 2000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 52 x 28 T-slot spacing: 500 Number of grooves: 8 x 8 Ljdpjymf I Eefx Afwjaf Edge distance: 250 Weight: 6700 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: used, plate width 2510 mm plate depth 5135 mm plate height 345 mm weight ca. 10 t required space 2,5 x 5,1 x 0,38 m Lasdshpvavspfx Afwof

Condition: used, plate width 2500 mm plate depth 5100 mm plate height 400 mm weight ca. 9 t Lajdpfx Ashpva Dofwjf required space 2,5 x 5,1 x 0,40 m

Condition: used, plate width 3000 mm plate depth 4000 mm plate height 370 mm Lsdpfx Ajhrrlusfwjaf no. of flutes 12 flute distance 210 mm

Condition: used, Year of construction: 2010, plate width 900 mm plate depth 5000 mm Lodpjn R Tt Ujfx Afwjaf plate height 860 mm required space 5,0 x 0,9 x 0,1 m

Condition: new, saw blade diameter 550 mm Number of revolutions 3580 r.p.m hole of sawblade 32 mm Control NC Laedpfeymf Tbox Afwof total power requirement 3 kW weight of the machine ca. 250 kg required space 980 x 1130 x 1430 mm The Gerd Wolff AC 550 is an automatic aluminium cutting machine which is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Schnittbereich 90° rund: 155 mm Schnittbereich 90° quadratisch: 155 x 155 mm Schnittbereich 90° rechteckig: 260 x 200 mm Schnittbereich 45° rund: 130 mm Schnittbereich 45° quadratisch: 130 x 130 mm Schnittbereich 45° rechteckig: 180 x 200 mm Standard Accessories - Location points for 15° – 22.5° – 30° – 45° – 67.5° - Fixing handle for locking at intermediate angles - Adjustable cutting speed for different types of profile - Saw covering with safety switch - Belt propulsion saw - Two hand safety operation - Easy to change saw blade - 2 x Pneumatic vertical piston with clamps - 1 x compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed adjustment for aluminium profiles - Cooling system for aluminium cutting - Auxiliary conveyor with rulers

Condition: new, plate width 3000 mm plate depth 1500 mm plate height 300 mm weight 3580 kg dimensions of the machine ca. 3000 x 1500 x 300 mm GERD WOLFF clamping plate 3000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. Laodoyk Ik Dspfx Afwef T-slot size: 52 x 28 T-slot spacing: 300 Number of slots: 5 Edge distance: 150 Weight: 3580 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: new, plate width 2000 mm plate depth 2000 mm plate height 300 mm weight 3250 kg dimensions of the machine ca. 2000 x 2000 x 300 mm Clamping plate 2000 x 2000 x 300 mm If you have not found the size you want, you can also send us an e-mail with the completed PDF form. With this, we can have a plate made for you individually. Number of grooves: 7 Edge distance: 100 mm Lasdpfx Afeyk Imlowef Groove distance: 300 mm Groove size: 28 x 52 mm Casting quality HT250 Weight: 3250 kg Flatness less than 0.12 mm. Surface machined according to DIN 876/III

Condition: new, plate width 2000 mm plate depth 4000 mm plate height 300 mm weight 5195 kg Clamping plates - T-slot plates - plate field 4000 x 2000 x 260 mm If you have not found the size you are looking for, you can also send us an e-mail with the completed PDF form. With this we can a custom made panel for you. Lajdjyq S Exspfx Afwof edge distance: 240mm groove spacing: 230mm Groove size: 22mm Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III The cover picture is for orientation only and does not represent a true-to- scale image of the plate.

Condition: used, table length 2000 mm table width 1250 mm Ljdpfxsu Su I Se Afwjaf table height 250 mm weight of the machine ca. 1,4 t

Condition: used, length / mm Lodoy Suzmspfx Afwsaf width / mm height / mm weight / kg