Used Automated Lines for sale (17,843)

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 Iodpfx Asr H Dpmsg Netn RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, 1999 The line is in good codition and is available from our stock in Hofkirchen/Austria

Condition: good (used), Year of construction: 2004, card printing machine Itodpfsp R Nrxsx Ag Nsn

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Iedpev T I R Sjfx Ag Netn Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue • premelter • coverfeeder (toploading), with scoring • Compressor Available immediately

Condition: used, Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile Iodpfxetiy Nto Ag Netn 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and Electrics

Condition: ready for operation (used), Fabrication line for production of metal racks 14 stations: double driven Axle Ø 80 mm station lt;- station: 400 mm adjustable centerdistance axles: min 100mm; max 280mm max feedingwidth: 780 mm max thickness: 3 mm steel Including: - Colombo excenter Press 100 ton for punching Stroke: 150 mm 16.5 hp Table: 600 x 1000 mm Stroke/min: adjustable from 30 - 90 str/ min - 4 column press on rails acting as flying shear Table 400 x 400 mm - Unloading table Work mode: Roll forming unit Material thickness x width: W 780 mm Max Itjdpfx Agexpkkvo Non Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Condition: used, Glasses Type: ACM 18 Machine control: SIEMENS PLC S7-1200 Safety controller: SICK Flexi Soft 1 media circuit (hydrocarbon) Feed pump: adjustable gear pump (24 V) Vacuum pump: diaphragm pump (230 V / 50 Hz) 1 liftable/pivoting membrane holder with 3 removable cascade rings for filter membranes with a diameter of 47 mm. System filter: 0.2 µm; length: 5 inches Return filter: 5.0 µm; Length: 5 inches System pressure: maximum 6 bar Maximum flow rate: 2.0 l/min Minimum flow rate: 0.250 l/min Maximum system temperature: 41°C Tank volume: approx. 12.8 liters Tank can be filled via a manual 3-way ball valve Recirculation and reuse of the rinsing medium Permissible ambient temperature: +15…+25°C Noise emissions are below 70 dB (A) Ijdpfx Aswaypfog Notn Flow-cap top with 1 particle filter (separation efficiency: 99.995%; filter class: H14 HEPA filter according to EN 1822) Employee protection against splashing analysis fluid thanks to a sliding guard Collecting tray under the membrane holder Operation via 12" BASIC touch panel (optional COMFORT panel) Operation via glass keypad and stylus with the 12" option COMFORT touch panel 32 different test programs, each with 30 rinsing steps Functions: Spraying, rinsing, ultrasound Basin 750 x 600 x 500 (W x D x H) mm with a usable volume of approximately 5 l for ultrasound (with hemisphere Ø300) Hinged safety screen with three movable panels for manual access (protects employees from splashing analysis fluid) Quick coupling in the basin area for connecting various nozzles. A 2.5 mm diameter nozzle is included. Insertion opening for components: approx. 1100 x 2200 mm (W x H) Basket for ultrasonic application for components up to 3 kg Product support grid for components up to 15 kg Extraction methods: spraying, rinsing, internal rinsing (optional), ultrasound Medium: Cold cleaner A III Analysis membrane Ø 47 mm (up to 3 pieces) Blank value: < 150 µm (from at least SaS 2 or SaS 3) Power supply (machine): 230 VAC 10%, 50/60 Hz Rated power: 500 W Rated current: 2 A Back-up fuse: 16 A (max.) Supply cable: at least 3 x 1.5 mm² Control voltage: 24 VDC3) External dimensions: H x W x D 1922 x 800 x 893 mm Weight: 324 kg Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Foresite C3 / C.I. Critical Cleanliness Control Tester Analytics Technology Year of manufacture: 2011 The C3 is unique among electronics cleanliness quality testers. It remains the only tester on the market that indicates whether a specific, critical area of a PCBA (Printed Circuit Board Assembly) is clean. Simply select the components and/or circuit areas most sensitive and vulnerable to contamination and/or reliability issues, and test a small area (0.1 in²). The C3 quickly provides feedback as to whether potentially detrimental residues, often caused by manufacturing processes, are present. Once the critical areas to be tested have been identified, the operator simply inserts a new disposable test cell into the vapor head and manually positions the head via the articulated arm over the test area. The weight of the arm and vapor head seals the test cell on the test surface. The operator then starts the automated testing sequence. Within 7-10 minutes, the operator knows whether the tested product area meets cleanliness standards. The C3 can be used directly in the production area. At the end of the test, the cell can be easily removed using the cell ejector on the head. The test sample in the cell, efficiently extracted from the small test area using steam, can undergo further analysis to identify specific contaminants and their concentrations. The entire test is simple and straightforward for the operator, with results not dependent on operator skill. The use of Pro-Site single-use test cells and extraction solution prevents cross-contamination of samples. Isdoxhcklopfx Ag Njtn You are welcome to arrange an inspection. We can also organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be provided, provided a valid VAT ID number is available. Subject to prior sale. Visit our shop and take a look at our other offerings as well. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and product description purposes. Technical data deviations and errors in the description of the item may occur and are subject to change.

Condition: excellent (used), Year of construction: 2015, With a view to optimized and energy-saving drives in the vehicle industry, significantly higher demands are placed on the components of the drive system. Higher power transmission and higher torques combined with smaller size are the challenges. This development has increased the demand for cold-formed splines. With the Vertical Splines Press (VSP) Sack & Kiesselbach provides the customer with a solution that offers technological and also logistical advantages compared to conventional technologies (such as roller burnishing or broaching). The relatively small and very user-friendly press can be configured both manually and as an automated system. In addition to the splines press, the customer can also obtain the appropriate die system and process technology from a single source. 1 used Vertical Splines Press make Sack & Kiesselbach type VSP 50/30 Year 2015 Technical data: Pressing force 500KN ram stroke 450 mm Closing speed 200 mm/s pressing speed 5,5 mm/s opening speed 120 mm/s table dimension 500 x 400 mm installation height 1000mm width between columns 530 mm splines cylinder speed 3-9,5 mm/s Dimensions height 2900 mm width 3100 mm depth 1400 mm Drive power 8 KW Special equipment Digital measuring system Iedpfx Ajgtty Tjg Notn Splines tool for internal splines

Year of construction: 2022, condition: new, For sale we offer new Lineshaft gravity modules. technical data: Length: 3000 mm Roll width: 800 mm Incl. supports and side guides Itsdpfxjkt Ur Rs Ag Nsn Available quantity 25 (75 rm.) Price per one module 1.250 € net If you are interested, please contact us. Shipping worldwide possible.

Condition: new, Fiberglass pipes Itodpfx Agjgtihle Nsn

Condition: ready for operation (used), De uitrusting bestaat uit: 1 - decoilertoren met 4 decoilers (AG 3000 a) capaciteit per decoiler: 3 ton armlengte: 1350 mm maximale snelheid: 25 m/min frequentiegestuurd 2 - spoelselector (MT-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 3 - richtunit (RM-4 1250) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd 4 - snij-eenheid (TS 1250 + KST-2) min: 150 mm maximale snelheid: 25 m/min frequentiegestuurd Itedpfxoxpgdro Ag Non 5 - Schechtl-schaar voor op maat knippen met Siemens Touch CNC-besturing 1250 x 2 mm

Condition: ready for operation (used), De uitrusting bestaat uit: - 3 afwikkelaars Elba 5 ton capaciteit - 1500 mm - Richtunit RAS 26.45 - Ras hoekuitsparingeenheid - Rashydr-unit voor het walsen van verstevigingsribben in het plaatwerk - Rasschaar voor het op lengte knippen RAS 82.16 - Ras vouwmachine snelheid: 15 m/min Vermogen: 16 kW Ijdpfx Ajwwbf Njg Njtn

Year of construction: 2007, operating hours: 300 h, condition: ready for operation (used), functionality: fully functional, overall weight: 1,300 kg, machine/vehicle number: PSW-L, Equipment: documentation/manual, No minimum price – guaranteed sale to the highest bidder! Tool holder with only 300 operating hours! MACHINE DETAILS Electrical Data Voltage: 3 × 400 V Frequency: 50/60 Hz Rated Current: 1.8 A Power: 710 VA Pneumatics Compressed air supply: 5 bar / 200 l/min Weight: 1,300 kg Operating hours: 300 h EQUIPMENT 3 pallets Iedpfx Agexliy Us Nstn Documentation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 13688, Year of construction: 2012, empty load weight: 4,990 kg, Fully automated, horizontal production line for IGUs and spacer frames! Production capacity of 1200 units per shift! TECHNICAL DETAILS Production capacity: 150 units/h MACHINE DETAILS Electrical Data Voltage: 480 VAC Frequency: 50/60 Hz Phases: 3 Maximum motor capacity: 2 A Short-circuit current: 5,000 A Power: 142 kVA Machine weight: 4,990 kg EQUIPMENT GED Intercept Ultra/Thin Spacer Frame Machine i-3 - CE version Warm-edge spacer manufacturing system Production of Intercept ULTRA stainless steel, ThinPlate, or BlackLine Isdpjxdibpsfx Ag Nstn Note: The machine is available from 02/12/2025!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8011510B, filter area: 72 m², production capacity: 80,000 unit/h, Equipment: CE marking, TECHNICAL DETAILS Capacity: 80,000 m³/h Number of filter bags: 384 pcs Filter length: 2,500 mm Filter diameter: 230 mm Filter area: 72 m² MACHINE DETAILS Connected load: 15 kW Weight of upper section with motors: 4,000 kg Weight of intermediate section with filter sleeves: 4,000 kg Weight of lower section with legs: 2,000 kg Main fan: 12 pcs Power of main fan: 15 kW Nominal air flow: 22 m/s Isdpfx Agsxmgtzo Notn EQUIPMENT Return lines Control cabinet CE marking Extinguishing system Control cabinet Shaking system Vacuum installation Note: The machine has already been dismantled.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning length: 900 mm, turning diameter: 300 mm, spindle bore: 86 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 270 mm, controller model: FANUC 31i-B, TECHNICAL DETAILS Swing diameter over bed: 780 mm Swing diameter over slide: 700 mm Maximum turning diameter: 300 mm Maximum turning length: 900 mm Bar capacity: 76 mm Spindle Chuck size (main/sub-spindle): Ø254 mm Spindle bore (main/sub-spindle): Ø86 mm Spindle speed: 4,000 rpm Spindle motor (max./continuous): 26 / 15 kW Spindle drive: integrated motor Spindle flange: A2–8 C-axis indexing: 0.001° Travel axes X1/X2 axis: 270 / 190 mm Z1/Z2 axis: 920 mm Isdpfx Agsxltbce Notn Y axis: ±120 mm Rapid traverses Rapid traverse speed X/Y/Z axes: 24 / 24 / 24 m/min Rapid traverse speed ZB axis: 12 m/min Guideway system: Box Guide Turret Tool stations: 2 × 12 External tool size: Ø25 mm Internal tool size: Ø40 mm Indexing time: 0.2 s/step Turret system: Wedge type Driven tools Motor power (max./continuous): 5.5 / 2.2 kW Tool speed: 4,000 rpm Collet size: Ø20 ER32 Tool type: BMT65 MACHINE DETAILS Control: FANUC 31i-B Tank and supply system Coolant tank: 230 l Lubrication tank: 8 l Electrical data Power consumption: 69 kVA Line voltage: 220 / 400 V Dimensions & weight Dimensions (L × W x H): 3,670 × 2,170 x 2,601 mm Weight: 11,000 kg EQUIPMENT LNS bar feeder

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece diameter (max.): 500 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Iedpsxldrxefx Ag Netn TECHNICAL DETAILS Travel paths: X-axis: 510 mm Y-axis: 510 mm Z-axis: 460 mm Workpiece dimensions: Maximum diameter: 500 mm Maximum height: 405 mm Table: Number of tables: 1 Table diameter: 500 mm Table width: 400 mm Maximum table load capacity: 300 kg Number of T-slots: 5 T-slot width: 80 mm Reference slot: 50 mm Table height: 800 mm Distance spindle nose – table, max.: 650 mm Distance spindle nose – table, min.: 190 mm Distance spindle nose – table center, max.: 600 mm Distance spindle nose – table center, min.: 140 mm Speeds: Rapid traverse X-axis (max.): 50 m/min Rapid traverse Y-axis (max.): 50 m/min Rapid traverse Z-axis (max.): 50 m/min Feedrate X-axis (max.): 50 m/min Feedrate Y-axis (max.): 50 m/min Feedrate Z-axis (max.): 50 m/min Spindle: Maximum speed: 12,000 rpm Minimum speed: 35 rpm Spindle motor (15 min): 22 kW Spindle motor (continuous): 15.0 kW Maximum tool diameter with adjacent tool: 80 mm Maximum tool diameter without adjacent tool: 125 mm Maximum tool length: 300 mm Tool change time (C/C): 4.5 s MACHINE DETAILS Electrical supply: Power (30 min): 66.6 kVA Power (continuous): 49.9 kVA Compressed air supply: Pressure: 500 kPa Flow rate: 200 l/min Cooling system: Total tank volume: 300 l Dimensions & Weight: Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm Weight: 7,600 kg EQUIPMENT Operator door lock with switch Full enclosure Top cover Transformer for Europe (CE) Ball screw cooling (X, Y, Z) Automatic tool measurement & Mazatrol PC-FUSION-CNC 640M 5X control Additional variables (600) Mazak Tornado thread cutting-drilling Mazatrol Mazak Tornado thread cutting-drilling (EIA) Intersection calculation between 2 lines Zero offset Reverse execution of commands G37 automatic tool length measurement Sequence comparison function RS-232C interface Mazacc 2D high-speed software Additional coordinate system (G54.1) Thread cutting function Machining navigation – forecast Machining navigation – control Machining navigation – results PCMCIA interface (2 slots) IC memory card interface Complete coolant system Lighting Manuals Note: The machine has not been used for 2 years, but was running smoothly up to that point. Pallets are included in the scope of sale and delivery. Tools and tool holders are not included in the scope of sale and delivery.

Condition: used, Used Tycon approximately 6,000 litre working capacity and 7115 litre total capacity type 808 blue glass lined receiver vessel. Unit measures approximarely 2,000mm diameter x 1680mm straight side. Unit has welded dished top and bottom heads. Internal rated full vacuum/2 bar design pressure at -10/+200 degC. Unit mounted on (4) mild steel legs. Specifications: Capacity: 1,585 gal Condition Of Glass: Used Internal Pressure: 14.5038 psi Internal Temperature: 392°F Vertical/Horizontal: Vertical Diameter: 78.74" Itjdpfexnl H Nex Ag Non Straight Side: 1680

Condition: good (used), Year of construction: 2012, Trumpf TruLaser 1030 Laser Cutting Machine with TruCoax 2500 Diffusion Cooled CO2 Laser & Trumpf CNC Control Ijdpfxoxncp Us Ag Nstn 2-Axis; Sheet Size 1,500mm x 3,000mm; Fully Automatic Pallet Changer with (2) Pallets, Dimensions Approx 3,000mm x 1,600mm each; 7.1/2" Lens Cutting Head; CO2, 2,500 Watt Laser Capacity; Nitro Line; 15" TFT Screen; RJ45 & USB Interface; S/No. of Machine A025A0366. Integrated KLH Chiller Unit; 400 Volt; 2 Axis; Closed Machine Frame Integrated Laser Unit; Sheet Support Accessible from both sides; Motorised Front Door & Rear Opening; Traverse Speed Approx 40 MPM; Weight Approx 8,900kg; (3) SICK C4000 Select Safety Light Curtains; (1) 3M Scotchcal 8518 Gloss Graphic Protection over Laminate 1,372mm x 45.72 Meters Drill Pallet Changer Template for Trulaser 1030 Machine (Unused).

Year of construction: 1973, condition: like new (used), Used BRONX Heavy Duty Initial Pinch Pyramid bending rolls. Year of manufacture : 1973. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION CAPACITY Two sets of dimensions which are shown below as "Prebending & Rolling" and then "Rolling only". Material Mild Steel Mild Steel Tensile strength 28/32 tons/sq.in 28/32 tons/sq.in Maximum width 11’(3350mm) 11’(3350mm) Maximum thickness at this width 2” (50mm) 2½” (63.5mm) Minimum inside diameter of rolled cylinder at maximum capacity 30’ (762mm) 37 ½’ (953mm) Maximum thickness of plate when hot rolling (finished rolling temperature 850° C.) Itsdpfx Agoh U Rzgj Nsn 4” (102mm) 5” (127mm) Minimum inside diameter of rolled cylinder at maximum capacity hot rolling 40” (1016mm) 50” (1270mm) MAIN PARTICULARS Diameter of all rolls - 27” (686mm) Body length of rolls - 11’2”(3403mm) Rolling speed - 12 f.p.m. (3600mm/min) Main drive motor - 150 H.P. Slip Ring Type Two bottom roll adjusting motors, each - 50 H.P. Slip Ring Type Combined operation of swing down bearing and top roll counterbalance - Hydraulically applied Hydraulic power pack motor - 10 H.P. Electrical equipment to be suitable for operation on a supply of - 400/440 volts, 3 phase, 50 cycles CONE ROLLING ATTACHMENT: To facilitate the rolling of taper or conical forms, a skid plate is fitted to the inside of the non-drive end housing. ELECTRICAL EQUIPMENT Motors: Main Drive - 150 H.P. half hour rated – slip ring screen protected – foot mounted type. Bottom Roll Adjustments - 50 H.P. half hour rated – slip ring screen protected – foot mounted type. Hydraulic Power Pack Motor - 10 H.P. continuously rated – Squirrel cage – screen protected – foot mounted type. Control Gear: Main Drive - Drum type reversing control gear with 5 minute rated wire wound resistances, designed to pass 100% full load on the first notch or operating position in each direction. The controller will be fitted with off position interlock and limit switch rings where necessary. Bottom Roll Adjustments - Drum type reversing control gear with 5 minute rated wire wound resistances designed to pass 100% full load on the first notch or operating position in each direction. The controllers will be fitted with off position interlock and limit switch rings where necessary. Hydraulic Power Pack - Direct-on-line contactor type starter, operated from a maintaining type push button station. Solenoid valves for operating cylinders are push button operated. Note: Full protection to be provided for all the above control gear by a circuit breaker, incorporating overload and no-volt protection. FEATURES AND EQUIPMENT Spare Roll included with the machine. LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 95 tonnes NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: excellent (used), Duplo 150 Digital Booklet System Location: Glendale, UK Availability: In stock Condition: Refurbished by trained engineers – Excellent condition, perfect working order. Overview The Duplo 150 Digital Booklet System is a compact, modular solution designed for low to mid-volume digital print finishing. This complete configuration includes the DSF-2200 Sheet Feeder, DBM-150 Booklet Maker, and DBM-150 Trimmer, delivering high-quality booklets with speed and reliability. Producing finished sizes from A6 up to A4, as well as custom sizes between 320 × 460 mm and 120 × 210 mm, it offers flexibility and professional results in a space-saving footprint. Capable of producing up to 2,400 books per hour, it is the perfect near-line solution for today’s digital printer. Key Features Produce booklets from A6 to A4, plus custom sizes. Handles up to 25 sheets (100 pages) per booklet. User-friendly PC controller with job recall and automatic set-up. Two feed trays for combining different media types. Job integrity assurance for accurate, error-free production. Fast operation with up to 2,400 books per hour. Complete System Includes DSF-2200 Sheet Feeder – High-capacity dual tray feeder with five different feed modes for maximum flexibility. DBM-150 Booklet Maker – Compact, fully automatic booklet maker with precision folding and stapling. DBM-150 Trimmer – Integrated fore-edge trimming for clean, professional edges on every booklet. Why Choose the Duplo 150? Ease of Operation – PC-controlled setup with automated adjustments for quick job changeovers. Flexible Production – Handles a wide range of sizes and stocks, ideal for digital workflows. Compact Design – A space-saving system combining feeding, folding, stapling, and trimming in one modular unit. High Efficiency – Continuous production of up to 2,400 booklets per hour with no wastage. Upgradeable System – Modular design allows additional Duplo devices to be added as business needs evolve. Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert operator training and ongoing support – we help you get the best results from your equipment. Competitive pricing on consumables – keep running costs low with our affordable supplies. Established and trusted supplier – years of experience in print finishing solutions, providing both new and used printing equipment. Specifications Manufacturer Duplo Model 150 Stock Number 114956 Max sheet size 320 x 460mm Itsdpfsw Tmy Nsx Ag Non Min sheet size 120 x 210mm Max booklet capacity 25 sheets (100 pages) Max speed 2400 sets/hour Staple heads Heavy duty Isaberg Rapid R952 Stapling width Adjustable - 70, 108, 160, 258 & 276mm Paper type Fine quality: 64 to 127.9gsm, Art/Coated: 104.7 to 127.9gsm Cover: Fine quality, Art/Coated within 300gsm DSF-2200 Sheet Feeder Specifications: Feeding System Belt suction, top feed, air separation User features Ultrasonic double sheet detection, hand feeding, active anti-static bar Paper capacity 200mm and 60mm in each tray System power requirements 240v 50HZ Full system weight 260kg Full system dimensions W2540mm x D750mm x H840mm

Condition: used, Used Pfaudler model CE10000 vertical glass lined reactor. Approximately 10,000 litre capacity. Internal rated 6 bar/full vacuum design pressure at -29 to 200 deg.c. External mild steel jacket rated 7.5 bar/full vacuum design pressure at -29 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with Pfaudler VSO gearbox and drive. Unit has mild steel mounting ring. Ijdpfjxm T Hbex Ag Nstn Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 108.778

Condition: excellent (used), Year of construction: 2015, Murata Muratec Wiedemann 'M2048TS' 200kN Punch Capacity Turret Sheet Metal Punch Press with Muratec CNC Control CNC Servo Motor Driven Ram; 1,250mm x 2,500mm Sheet Capacity (with no repositioning); Maximum Punch Thickness 6.35mm Mild Steel; Stroke Approx 160mm; 5.5kW Motor; 44 Number of Tool Stations x 4 Index; Steel Ball Table; Crash Sensor; Foot Switch Control; S/No. 14KX463570001. Modular Machine Guard Caging with Omron F3SJ Type Safety Light Curtain; Weight of Machine Approx 12,000 Kilos; Footprint Approx 3,800mm x 7,000mm; Plus Large Quantity of Tooling in (2) Steel Cabinets; Line Voltage 240V; Machine Voltage 415 Volt; Wiedemann Tooling. Itjdpfxsxnb Ivo Ag Njn

Condition: used, Used PRODUKT CZ model PS-LINE automatic filling and closing machine suitable for liquid or paste products. The device is suitable for filling into glass bottles and works in this working strokes: - Manual placing of bottles on the conveyor. - Automatic locking of bottles under the filling nozzles - Automatic loading of the nozzles into the neck of the bottles - Automatic filling of bottles with product (PRODFILL PS-1500/IV/L linear filling machine) - Automatic nozzle removal from packaging - Release of the stoppers and removal of the bottles from the filling position - Capping (automatic/manual) - Automatic locking of bottles in the closing position - Automatic cap closure (PRODSCREW ZS-1500/L/S screw cap closure device) - Release of stops and removal of bottles from the closing position Itsdpfx Agsxm T Hnj Nen - Automatic application of self-adhesive label (PRODLABEL ES-1500/L/R self-adhesive label applicator) - Moving from the labelling position Line has been dismantled, attached photos are from previous installation.

Condition: used, Used DeDietrich model CE10000 vertical glass lined reactor. Approximately 10,000 litre working capacity & 11,710 litre total capacity. Internal rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. External mild steel jacket rated 6 bar/full vacuum design pressure at -25 to 200 deg.c. Unit has welded dished top and bottom heads. Top entry 3-blade retreat curve agitator with drive. Unit is mounted on (4) legs. Itsdpfjxlgigex Ag Njn Specifications: Capacity: 2,641.7 gal Material of construction: Glass lined, External mild steel jacket Internal pressure: 87 PSI Jacket pressure: 87 Legs/lugs: 4