Used Automatic Cnc Lathe for sale (32,177)

Condition: used, Year of construction: 2006, Ref. -No.: 10402 Manufacturer: GILDEMEISTER Type: Gildemeister GMC 35 ISM Year of construction: 2006 Type of control: CNC Control: SIEMENS SINUMERIK 840D PowerLine Storage location: Halberstadt Country of origin: Germany Machine-No.: 5702-0027 work spindles: 6 Turning Speeds: 6300 RPM C-Axis: Ausricht- und Schalteinrichtung Spindle passage: 32 mm Spindle power: 6 x 4 kW Capacity At 100% Load: 6 x 4 kW Max. Torque: 6 x 15 Nm Usucvsmdkx Rapid Travel Speed X-Axis: 12 m / min Rapid Travel Speed Z-Axis: 12 m / min Travel -X Axis: 68/100 mm Travel -Z Axis: 68/100 mm Connected Load: 107 kVA Machine length: 7000 mm Machine width: 1800 mm Machine Height: 2400 mm Further information: Features: 5 cross slides for machining in X and Z Pick-up spindle freely programmable in position 6 5 front spindles of which 5 can be driven 4 U-axes electrically prepared 1 axis for back machining on the pick-up spindle Kraft and Bauer CO² fire extinguishing system Hinged belt chip conveyor Artis tool breakage control Tool carrier: Number: 12 Axes X/Z: 68/100 mm Rapid traverse X/Z: 12 m/min Tools for backworking: 1 Bar loading magazine: IEMCA Sir 36P; type 33 F Year of manufacture 2006 Serial number 020440MA04 Bar length 3000mm Knoll high pressure system AE1114: Year of construction 2006 Filter system Pumps 5Bar and 40Bar individually adjustable for the processing steps Heat plate exchanger Lifting pump from the chip conveyor Machine is in operation under power and can be inspected by appointment.

Year of construction: 2017, Condition: used, Star Micronics SW20 Sliding Head CNC Automatic Lathe with Fanuc Series 31i-Model B5 Control. S/No. 0354 (032) (02/2017), FMB Turbo 3 - 36/3200/A Barfeeder, S/No. 57-263480R 1500993 (2017), Pumps & Equipment Hydrojet TS-20-2000-6T High Pressure Coolant System, Absolent A Mist 10 Oil Mist Filter Extractor, Firetrace Fire Suppression System, LNS Turbo HB Swarf Conveyor, Coolant System with Tipping Skip. Machine Weight 3400kg. Country of Origin: Japan Please Note: This lot is located in Stourbridge, UK. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Dpseoh

Condition: good (used), Year of construction: 2004, Fanuc control -3 channel, pick-up spindle, Mveq0Nkibr rear end machining, FMB loading magazine, chip conveyor, immediately available

Condition: excellent (used), Citizen M32 Model M3 CNC Lathe (2002) y axes Platten, Beh88Im swarf, Absolent Ventilation System, Cool Blaster Chiller-high pressure, M-32 M22032/0622 2002, P13155, fire suppression device. Tooling. New 2002.

Year of construction: 1984, Condition: good (used), Güdel G100 CNC with new Siemens control system working range - max. circulation Ø:260 [mm] - max. machining Ø:120 [mm] - traversing of the longitudinal slide:200 [mm] - traverse of the facing slide:120 [mm] Main spindle - spindle nose:A4 DIN 55021 - spindle bore for collets:type F38 - Power chuck Ø:165 [mm] - Bar passage Ø:32 [mm] - Speed range:50 - 60 000 [rpm] Main drive - DC motor:7 [kW] 0Drj2S8T Feed drives (DC motors) - feed speed:0,01 - 6 000 [mm/min] - rapid traverse rate:6 [m/min] Tool carrier - 8-sided flat table turret Tool carrier plate interchangeable:210 [mm] - tool clamping surface:110 [mm] - Selectable for 2, 4 or 8 positions indexing:0.8 [sec.] - Repeat accuracy or linear system:0,001 [mm] Main dimensions - length:1 700 [mm] - Width:1 100 [mm] - Height:1 850 / 1 600 [mm] - Height spindle center above floor:1 120 [mm] - Weight:approx. 1 300 [kg]

Condition: good (used), Year of construction: 2000, Equipment: Documentation/Manual, Citizen CINCOM M12 Year of production of the machine: 2000 Year of feeder production: 2009 Dpqazh Spindle speed 12,000 rpm Spindle power 2.2 kW. Capable of working with a maximum working diameter of 12 mm from the main spindle and 12 mm from the counter-spindle, with a maximum turning length of 200 mm. Includes LNS Express 332 bar feeder, bushings, driven toolholders, chip ejector. Optional HPC Cool Blaster (at additional cost). Machine in very good condition.

Year of construction: 2006, Condition: excellent (used), STAR ECAS 32 T CNC automatic lathe - Very good condition - Many accessories available - Detailed photo gallery included in PDF catalog TECHNICAL DATA Max. Machining Diameter: 32 mm Max. Headstock Stroke: 350 mm Tool Post: First Turret: 10 stations Second Turret: 10 stations Number of turning tools: Max. 2 tools / station Tool shank: 16 mm Sleeve Holder: Number of tools: Max. 3 tools / station Max. Drilling Capacity: 23 mm Max. Tapping Capacity: M12 X P1.75 Max. Die Cutting Capacity: M12 X P1.75 Power Driven Att. Number of Tools: Max. 2 tools / 1 station Max. Drilling Capacity: 10 mm Max. Tapping Capacity: M8 X P1.25 Max. Milling Capacity: 12 mm Max. Slotting Capacity: 2 mm X 10 mm Main Spindle min. indexing degree: 0.01° Main Spindle Speed: 7`000 rpm Power Driven Att. Spindle Speed: 5`700 rpm 7Qholnor27 Coolant Tank Capacity: 230 l Dimensions: 3175 x 1745 x 1860 mm Center Height: 1084 mm Weight: 5`700 kg Power Consumption: 8.0 KVA No responsibility is taken for the accuracy, completeness and timeliness of the information.

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Automatic lathe with C-axis and bar feeder LNS 3.16 HS-4.4 TECHNICAL DETAILS number of axes: 7 Control: FANUC 18i-TB turning length: max. 205 mm bar diameter spindle: 20 mm turning speed: 500 - 10000 rpm Indexing C-axis: 0.01 spindle power: 2,2 kW bar diameter counter spindle: 20 mm counter spindle rotation speed: 8000 rpm Indexing C-axis counter spindle: 1°. counter spindle power: 2.2 kW Number of positions of end pieces: 8 number of positions of guide holders: 16 number of motorized tool holders: 4 speed of the motorized tool holders: 18.000 rpm Number of positions for secondary machining: 5 MACHINE DETAILS lubricant tank: 155 l Supply voltage: 400 V machine dimensions: 2200 x 1200 mm weight: 2200 kg Fzd8Vio EQUIPMENT synchronous spindle driven tools C-axis backworking parts conveyor belt Fire extinguishing system material feed LNS 3.16 HS-4.4

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Siemens control, Bkuozfgxprt Spindle passage 32mm, turret, driven tools, loading magazine, high-pressure cooling, chip conveyor, complete accessories, immediately available.

Condition: excellent (used), Citizen M32 Model 5 ‘3 M5’ CNC Lathe (2003) Y axis capability on turret, R8Haptrfah (8) Station High Pressure Coolant, Fire Suppression Device, Swarf, Barfeed Hydrbar 332, Mcc 2032/0010, 2003,P14012, 3200 Kgs. Tooling. New 2003.

Condition: excellent (used), Year of construction: 1999, Functionality: fully functional, incl. loading magazine Iemca Mini Boss 325/32 5-axis CNC sliding headstock automatic lathe CNC control Mitsubishi M 6 Turning diameter 20 mm turning length 200 mm Qb0Q9 spindle bore 24 mm Driven tools pick-up spindle-counter spindle Drive power 3.7 KW incl. very extensive tooling. The machine has become available due to age-related liquidation and is in excellent mechanical and well-maintained condition. mechanical and well-maintained condition. The machine was only operated in single-shift operation. All manuals and documents are available.

Condition: good (used), Year of construction: 1999, Equipment: Documentation/Manual, Citizen CINCOM M12 Year of production of the machine: 1999 Year of feeder production: 2009 Spindle speed 12,000 rpm Spindle power 2.2 kW. Capable of working with a maximum working diameter of 12 mm from the main spindle and 12 mm from the counter-spindle, with a maximum turning length of 200 mm. Csi7Tjbc80 Includes LNS Triton 112 bar feeder (interchangeably we offer FMB Minimag 20), bushings, driven holders. Machine in very good condition.

Year of construction: 1999, Condition: excellent (used), Citizen M20-C CNC Swiss type lathe Technical Data Max. Machining Diameter: 20 mm Max. Machining Length: 320 mm / chuck Max. Drilling Diameter: 10 mm Max. Tapping Diameter: M8 Through-hole Diameters: 24 mm, 21 mm Spindle Speed: 200 - 8100 rpm Spindle Speed Change Steps: Steepless, S4-Digit Rotary Tool Max. Drilling Diameter: Gang Tool: 5 mm Turret: 5 mm Rotary Tool Max. Chucking Diameter: Gang Tool: 10 mm Turret: 7 mm Rotary Tool Max. Tapping Diameter: Turret: M5 Tool Spindle Speed: Cqzw3Dgqha Gang Tool: 250 to 5000 rpm Turret: 320 to 6380 rpm Tool Spindle Speed Change Steps: Steepless, S4-Digit Back Spindle Max. Chuck Diameter: 20 mm Max. Front Separate Length of a Back Machined Workipece: 125 mm Back Machining Max. Drilling Diameter: 8 mm Back Machining Max. Tapping Diameter: M8 Back Spindle Speed: 150 to 7200 rpm Back Spindle Speed Change Steps: Steepless, S4-Digit Number of Tools to be mounted Gang Tool: Cutting 5, Drilling: 3 (Total 8 tools) Turret: 10 Count of Turret Indexing: 10 Tool Holder: Gang Tool: Special M20 gang tool Turret: Ø 10- Ø 10 mm (Positioning Pin Type) Cutter Size: Gang Tool: 13 x 13 x 130 mm Turret: 10 x 10 x 60 mm Max. Diameter of Tool Mounted on Rotary Tool Holder: Gang Tool: Drill, End Mill: Ø 10 mm Turret; Drill, End Mill: Ø 7 mm Tap: M6 Slitting Cutter: 45 x 12.7 mm Rapid Feedrate X1 Axis: 15 m/min X2, Y1, Z1, Z2, Z3 Axes: 18 m/min A2 Axis: 200 rpm Least Input Increment: X1, X2, Y1 Axes: 0.001 mm Z1, Z2, Z3 Axes: 0.001 mm A2 Axis: 0.001 deg. Spindle Indexing: 0.001 ° Center Height: 1070 mm Motors: Spindle Motor: 2,2 / 3,7 kW Back Spindle: 0,75 / 1,5 kW Gang Tool: 0,4 kW Turret: 0,4 kW Y1, A2 Axes Feed Motor: 0.3 kW x 2 X2, Y1, Z1, Z2, Z3 Axes: 0.5 kW x 5 Hydraulic Motor: 0,4 kW Coolant Motor: 0,25 kW Lubricant Motor: 0,004 kW Input Power Capacity: 14 KVA Required Floor Space: 1100 x 2540 x 1700 mm Weight: 2500 kg We do not take any responsibility for the correctness, completeness and topicality of the information.

Year of construction: 2003, Condition: excellent (used), Functionality: fully functional, CNC sliding headstock lathe with 7 axes. TECHNICAL DETAILS 7 axes: X1 / Z1 / Y1 / C1 / X2 / Z2 / C2 bar diameter: max. 20 mm turning length: max. 205 mm main spindle speed: max. 10.000 rpm counter spindle speed: max. 10.000 rpm C-axis: 0.001 degree Control: Cincom Mitsubishi Meldas Jzewn3 Tool holder: 18 tools (linear tool holder, front attachment, backworking) EQUIPMENT - Parts conveyor belt - fire extinguishing system - Chip conveyor - Loading magazine IEMCA BOSS 432r

Condition: used, Year of construction: 1997, Functionality: fully functional, Machine/vehicle number: 9704 122, can produce: ball end hex key 1,5-10mm (1/16-3/8"), torx keys TX7-TX55, Blufnayopia bits 25-150mm ( bowl feeder for 25mm bits included ) vertical feeder for long bars + complete set of collets and tubes + with this machine we offer 1 extra machine for spare parts another LP and Wera profilators available

Condition: excellent (used), Citizen L 20E-2M12 CNC Lathe (2015) Serial Number L220EA/0283, Year Dec-2015, QF5336. B Axes Power Drilling, High Pressure Coolant, R8Grsyx32H Bar Feed, Fire Suppression Device. Tooling. New 2015.

Condition: like new (used), Year of construction: 2006, Citizen K16 VIP automatic lathe (year of manufacture: 11/2006, serial number: K00447) Measuring width 1610 mm Measuring depth 1850 mm Measuring height 1050 mm Machine weight 1,950 kg Cshd2Rhhlo IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture: 2007, serial number: 020704BA02) Comes with a large number of bushings for the machine and feeder, turning knives, driven holders.

Year of construction: 2003, Condition: excellent (used), Citizen M32 V CNC automatic lathe Max. Machining diameter: 32 mm Max. Machining length: 320 mm per chuck Max. Diameter for frontal drilling: 12 mm Max. Diameter for frontal tapping: M10 Diameter of spindle passage: 36 mm Main spindle speed: 200 - 8000 rpm Change of main spindle speed: digits S + 4 without graduation Step feed of the main spindle: 1°. C-axis of the main spindle: 0,001°. Max. Clamping diameter of counter spindle: 32 mm Max. Length of the part to the front during backward machining: 145 mm Max. Protrusion of the parts from the counter spindle: 65 mm Max. Drilling diameter in backward machining: 10 mm Max. Max. threading diameter in backworking process: M8 Counter spindle speed: 200 - 7000 rpm Graduated speed change, counter spindle: digits S + 4 without graduation Graduated feed rate, counter spindle: 1°. C axis of the counter spindle: 0.001°. Tool spindle of tool holder 1 Max. Drilling diameter: 7 mm Max. Max. thread diameter: M8 Yruaofad Spindle speed, stepless: From 200 - 5000 rpm Tool spindle from tool holder 2 Max. Drilling diameter: 10 mm Max. Max. thread diameter: M8 Spindle speed, stepless: From 200 - 5000 rpm Tool spindle of the counter spindle tool holder Max. Drilling diameter: 7 mm Max. Max. thread diameter: M6 Spindle speed, stepless: From 200 - 5000 rpm Count of step feed for turret station: 20 Number of mountable tools: Up to 21 tools Rotary chisel in tool holder 1: 5 tools Driven tools in tool holder 1: 4 tools Tools in tool holder 2: 3 tools Tool holder for turret tool holder: Ø36-Ø12 (positioning pins) Tool dimension tool, tool holder 1: 16 x 16 x 130 mm Tool, tool holder 2: 16 x 16 x 90 mm Sleeve (tool holder 2): Ø 25.4 mm Sleeve (counter spindle tool holder): Ø 25.4 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 1): Ø 10 mm Max. Diameter of the tool clamped in the holder for driven tools (in tool holder 2): Ø 10 mm / Ø 60 x Ø 15.875 Ø 63 x Ø 16 Ø 60 x Ø 25.40 / Ø 63 x Ø 22 Ø 32 x Ø 10 / Ø 80 x Ø 15.875 Rapid traverse X1, Y1, Z1: 20 m/min X2, Z2: 20 m/min Y2: 8 m/min X3, Z3: 20 m/min Smallest increment X1, Y1, Z1: 0.001 mm X2, Y2, Z2: 0.001 mm X3, Z3: 0.001 mm Axis stroke X1: 108 mm Y1: 275 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 202 mm X3: 238 mm Z3: 410 mm Bar length: 2500 mm Central height: 1132 mm Motors 2,2 / 3,7 kW 3,7 / 5,5 kW For control of guide bush: 0,75 / 1,5 kW For control of counter spindle: 0,75 / 1,5 kW For tool spindle of tool holder 1: 1 kW For tool spindle of tool holder 2: 0,75 / 1,5 kW For tool spindle of counter spindle tool holder: 0,75 kW X1: 0.4 kW Y1: 0,75 kW Z1: 0,75 kW X2: 1 kW Y2: 0.75 kW Z2: 0,75 kW X3: 0,75 kW Z3: 0,75 kW T1: 1 kW For main spindle chuck: 0,2 kW For counter spindle chuck: 0,2 kW For the extractor: 0,2 kW For unloading the products from the machine: 0,2 kW For the coolant: 0,4 kW For the lubricating oil: 0,004 kW Dimensions: 2770 x 1370 x 1820 mm Weight: 3100 kg For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: like new (used), Year of construction: 2006, Functionality: fully functional, Machine/vehicle number: K00446, Spindle speed (max.): 15,000 rpm, General data Automatic lathe Citizen K16 VIP (year of manufacture: 11/2006, serial number: K00446). Measuring width 1610 mm Measuring depth 1850 mm Measuring height 1050 mm Machine weight 1950 kg IEMCA Genius 118 Type 37 LL bar feeder (year of manufacture: 2007, serial number: 020704BA04) Included a large number of bushings for the machine and feeder., driven holders. Dpptp7

Year of construction: 2000, Condition: excellent (used), TORNOS DECO 2000 CNC automatic lathe TECHNICAL DATA Dimensions and weights Dimensions: length: 2000 mm width: 1260 mm Height: 1950 mm Weight: Empty: 2550 kg Specific floor load: Approximately: 8 daN/cm2 Axles 1 movable headstock: Z1, S1 2 independent linear Tooling system on the vertical: X1 / Y1 (S6) - X2 / Y2, S2 1 front attachment, 4 spindles: X3 / Z3 1 independent pick-up spindle: Y4 / Z4, S4 1 independent tooling system in backworking: X4 (S5) General data Bar capacity: For min. remnant: 13 mm For max. remnant: 16 mm Max. Workpiece length: With rotating guide bush: 180 mm Work in clamp: 30 mm Main spindle speed: 12000 rpm Spindle rotation direction: Preferably: To the right Motorization main spindle: Continuous operation: 2,2 kW Intermittent duty: 3,7 kW Motorization tapping spindle: Continuous operation: 1,5 kW / Intermittent operation: 2,2 kW Headstock clamp type: F20 Guide bushes: rotating, fixed Type of F'bushing tongs: Master: 605 Number of tools in main operation: Fixed: 2 x 5 / Rotating: 3 + 3 Number of front tools: Fixed: 4 / Rotating: 3 Cross section of tools: 12 x 12 Tool tongs: Rotating Standard: ESX 20 Number of tools in backworking: Fixed: 3 + 3 / Rotating possible: 3 + 3 Bar feeder: Yes Parts removal: Basic version Machine type: Moving headstock Machine axis height: 1100 mm Headstock travel: 255 mm 8Dw7Hyhokk Bar guide position: To the right of the user Bar passage: 1-16 mm Telescopic tube passage: Bore: 6-17 mm Speed: Left / right: -12000 to 12000 rpm Headstock feed speed: Max. 20 m/min We do not take any responsibility for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), STAR SV-20 CNC automatic lathe TECHNICAL DATA OF THE CONTROL AXES rapid feed X,Y: 15000 mm/min rapid feed A,B: 15000 mm/min rapid feed Z1,Z2,E: 18000 mm/min Rapid feed C: 90000°/min Smallest input unit: 0.001 mm Smallest input unit, C axis: 0.001°. Cg2F03M9I2 MACHINING CAPACITY Max. turning diameter: 20 mm Max. headstock stroke: 205 mm Max. drilling capacity: stationary: 14 mm; driven: 8 mm Max. Tapping capacity: Stationary: M10 X P1.5; Driven: M6 X P1.0 MAIN SPINDLE Spindle speed: 500 - 10000 rpm Drive: spindle drive main spindle motor: 3,7 / 5,5 kW main spindle bore: 26 mm PICK-UP SPINDLE Max. Clamping diameter: 20 mm Max. Part length for ejection to the front: 150 mm Max. Unclamping length: 75 mm spindle speed: 500 - 10000 rpm Pick-up spindle motor: 2,2 / 3,7 kW Indexing angle: 1°, 15 CONFIGURATION Operation mode: right-handed Dimensions: 2670 x 1375 x 1650 mm Weight: 3400 kg We do not guarantee the accuracy, completeness and timeliness of the information.

Condition: excellent (used), LEADWELL T-8SM CNC LATHE, 5 AXIS, FANUC 18-I TB CONTROL, FULL AXIS ON BOTH SPINDLES, 12 POSITION TURRENT, TRAVELS: X-10", Z-20", Z2-20", Y- AXIS UNDER SUB SPINDLE, TOOL SETTER, CHIP CONVEYOR, MAIN SPINDLE: 4,500 RPM, 3" BAR CAP, SUB SPINDLE: 4,500 RPM, 2" BAR CAP, PARTS CATCHER, PARTS EJECTOR, DOM: 2006 Bei2Kve

Condition: ready for operation (used), Year of construction: 2023, Operating hours: 10 h, We are selling our almost new CNC milling machine for wood, plastic, aluminum and composite materials. The milling machine is fully functional and is offered including control, PC and monitor. The milling machine is available for inspection and testing at any time: Dimensions: 2000mm x 4000mm x 200mm Spindle: Power: 3.5KW Air-cooled spindle Max Speed: 18000-24000rpm Speed Range: 0-24000rpm Motor Type: Servo motor Empty Speed: 35m/min Clamping Tools: Tool Sizes: 3.175mm, 4mm, 6mm, 8mm, 12.7mm Table: Type: Vacuum table + T-slot (8 zones) Power: Total Power Consumption: 10KW Voltage: 380V, 3-phase (customizable) Control System: System: March 3 Weight: Total Weight: 1.5T Additional Components: Frequency Converter: 5.5KW Vacuum Pump: 7.5KW Software Compatibility: Sutyfpcge Compatible Software: ArtCAM, Type3, CAD, CDR Carving Instructions: Standard G code, u00, mmg, plt Configurations: Electrical Appliance: Chint from China tested in Germany and converted to EU standards. Rack: Grinded helical rack Z Axis: Taiwan TBI screw drive Guide: Taiwan square rail Electrical Components: Schneider special components imported from France Limit Switch: Omron photoelectric limit switch imported from Japan (limit limit) Oiling System: Automatic oil filling Tool Sensor: Included Dust Collector: Included with double group bags Applications: Materials: Wood, Acrylic, PVC, Plastic, Soft metal, and other materials

Condition: good (used), Year of construction: 2010, Functionality: fully functional, VERTICAL LATHE BERTHIEZ LVM 200P retrofitted in 2010 CNC ECS 4802 8 AXES 2 PALLETS diameter 2000mm passage diameter 2500mm height clearance 1780mm table load 5000kg power 75 kw Cvjerylmh8 speed in 2 ranges 2 to 250 rpm traverse stroke 1100mm runner section 210 x 240mm runner stroke 1250mm ATC 40 ISO 50 tools C AXIS on platen 0.001° increment continuous speed 0.01 to 1.6 rpm rotating tools speed 2 ranges max. 2000 rpm spindle center coolant machine in operation at my customer's site

Condition: new, Discover the ultimate power and precision of our vertical lathe series. With its robust construction and proven technology, it delivers groundbreaking results for your machining projects. Experience the limitless possibilities of our CNC variant and take your production to the next level. TECHNICAL MAIN DATA (CNC MODEL): - Max. swing diameter: 1500/1800/2750/4000/5000 mm - Max. turning diameter: 1250/1600/2500/4000/5000 mm - Max. workpiece height: 1000/1600/2000/2000/2000 mm - Spindle motor power: 30/37/55/75 kW Nmaoj - Table diameter: 1000/1250/2250/3600/3600/4500 mm - Max. table speed: 500/400/120/63/63/50 rpm ACCESSORIES: Fanuc or Siemens control, ZF gearbox, chip conveyor, lubrication system, hydraulic system, machine guard, air gun, tricolor lamp, work light, chip cart, foot pedal, standard tool holder. SPECIAL ACCESSORIES: C-axis, tool magazine, linear scale, tool presetter, workpiece probe, electrical cabinet air conditioner, special tool holder, and more. For further details, please refer to the attached PDF file. TECHNICAL MAIN DATA (CONVENTIONAL MACHINE): - Faceplate diameter: 1000|1400|1800|2000|2300 mm - Swing diameter: 1200|1600|2000|2300|2600 mm - Turning height: 1000|1250|1400|1600|1500 mm - Table speed: 6.3-200|5-160|3.2-100|5-160|2.5-80 m/min - Gear stages: 16 - Max. workpiece weight: 3.2|5|8|8|8 t - Main motor power: 22|30|37|37 kW - Approx. machine weight: 9|14|18|23|21 t ACCESSORIES: Tool holder: 5-fold; Faceplate: with 4 jaw clamps; Servo motors: for axis adjustment, and more. For further details, please refer to the attached PDF file. Conventional vertical lathe with solid and proven technology, power, and precision for the machining of heavy workpieces. - Optimal loading - easily accessible with crane and forklift - Vertical support with 5-fold tool holder and side support (optional) with separate feed for internal and external machining - Heavy-duty column construction with wide, hardened guides - Hydraulic clamping of the crossbeam - Stable guide construction provides excellent stability and accuracy to the vertical arm - The spindle runs in a highly precise double-row roller bearing and is adjustable - The drive is through a reduction gear for high torque and a speed range of 2.5 - 80 min- Warranty: 12 months on the machine Now get a 15% energy subsidy from BAFA when replacing an old machine! Also benefit from the favorable leasing and hire purchase conditions of our leasing partners. Ask us about it. Of course, you also receive free delivery, assembly/commissioning, and ready-to-use handover as well as control training from us. The special net price displayed refers to the smallest model of the conventional series. The images show the CNC variants as well as a conventional version.