Used High Precision Lathe for sale (27,760)

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. We can overhaul a machine from you or deliver a machine from us. Ijdpjfhnr Iofx Acpjtn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, We offer you: Manufacturer: Chiron Type: FZ08 MT Precision+ high speed plus Year of manufacture: 2017 Control system: Fanuc 31i-B5 Technical data: Travel ranges: X-axis: 210 mm Y-axis: 200 mm Z-axis: 360 mm B-axis: -10° to +100° C-axis: 360° Main spindle: Speed range – main spindle: max. 54,000 rpm Itsdpfx Ajz I U D Uocpen Drive power – main spindle (100/25%): 3.5 / 5.2 kW Torque: max. 2 Nm Turning spindle: Max. bar diameter: 32 mm Speed range: 15 – 8,000 rpm Drive power (100/15%): 9 / 12 kW Torque: max. 14.3 Nm NC 2-axis swiveling unit: Swiveling angle: -60° to +180° NC rotary table diameter: 170 mm Tool changer: Tool holder: HSK-E 32 Number of tool positions: 40 Max. tool diameter: 45 / 100 mm Max. tool length: 200 mm Max. tool weight: 1.2 kg Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.5 sec Feed rates: Rapid traverse (x/y/z): 75 m/min Operating hours: approx. 37,280 h Spindle hours: approx. 11,360 h Please refer to the PDF in the attachment for technical features and accessories. Accessories, tools shown in the images, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to change and errors in technical data and specifications, as well as prior sale!

Condition: used, New precision lathe chuck, precision chuck 3-jaw high precision power chuck High Precision Air Chuck KITAGAWA KPC63C100 EP 3-jaw pneumatic precision chuck with integrated cylinder Chuck No. L1208 - P - EP Year of manufacture: 2011 External diameter: 150 mm External clamping range: approx. 3-135 mm Internal clamping range: approx. 6-149 mm Jaw stroke: Ø 2.5 mm Max. clamping force: 11.6 kN Repeatability: 0.0010 mm Jaw mounting bolts: M5 x 16 mm, 4 units per jaw Chuck mounting bolts: 6 units, M6 x 65 mm Max. speed: 4000 rpm - Unused, packed in original box - Box only opened for photos Weight (chuck): 6.3 kg Iodpfx Aceyif I Iopotn Weight with box: 8.5 kg New, unused, as-new from stock Suitable for DMG WASINO G series and many Japanese lathes

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, spindle bore: 38 mm, input voltage: 400 V, spindle nose: D1-3, spindle speed (max.): 5,000 rpm, input frequency: 50 Hz, overall weight: 1,200 kg, Schaublin 125 CCN CNC lathe – Retrofitted with Siemens 828D – Retrofit in 2012 For sale: Schaublin 125 CCN precision CNC lathe, retrofitted with a Siemens 828D control system. The machine was manufactured in 2012 and has very few operating hours. As a result, the machine is in excellent condition and is very attractive to companies looking for a compact and precise CNC lathe. Features: Brand: Schaublin Type: 125 CCN Itjdpfx Acoz Ix Iwspon CNC control: Siemens 828D, retrofitted in 2012 Low operating hours Very suitable for precision turning work Compact, high-quality Swiss precision lathe The Schaublin 125 series is known for its high precision, solid construction, and excellent build quality. Thanks to the Siemens 828D control system, this machine combines the well-known mechanical quality of Schaublin with a modern and user-friendly CNC control. A great machine for various applications, including precision mechanical production, single parts, small series, toolmaking, and precision work. The machine can be viewed by appointment. Price and further technical information are available upon request.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, laser source manufacturer: Rofin, laser power: 200 W, overall weight: 1,000 kg, total length: 2,300 mm, total width: 770 mm, total height: 1,800 mm, Equipment: CE marking, documentation/manual, StarCut Tube Precision CNC cutting for tubes and flat parts Precision cutting for tubes and flat materials From catheter shafts to stents, hypotubes, and more A highly stable cutting platform – the SL uses a mineral cast base – delivers contour cutting accuracy better than ±5 µm. The machine was manufactured in 2012 but never used in production. It was only checked to ensure that everything was functioning correctly. Weight (kg) 1000 Length (m) 2.3 Height (m) 1.8 Depth (m) 0.77 Other dimensions Pallet not included in the dimensions We can assist with delivery to any location. Itedpfxszt A H Rj Acpen The machine is in very good technical condition. The machine can be inspected and tested in Poland at the following address: 33-350 Piwniczna Zdrój, Poland.

Condition: excellent (used), Year of construction: 2011, MODEL AMADA TOGU EU PRESCISION TOOL GRINDING MACHINE WHEEL CBN 150 MAX TOOL DIAMETER 160 Iedpfx Ajzx Sixjcpjtn MAX GRINDING DEPTH ,ONE CYCLE, 0.99 SPINDLE MOTOR 1.5KW SPINDLE MOTOR SPEED 3000 RPM VERTICAL TRAVERSE 200 MACHINE WEIGT 470 KGS PWOER CONSUMPTION 4.8 KVA

Condition: ready for operation (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/4, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 955 kg, For sale: AI DR1L S lathe – very complete with accessories For sale: an AI DR1 LS universal conventional lathe, complete with an extensive set of accessories. A robust and heavily built Dutch lathe, suitable for precise turning work and various tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical specifications AI DR1 LS Center height: 133 mm Center distance: 750 mm Turning diameter above the bed: 270 mm Turning diameter above the cross slide: 145 mm Main spindle bore: 26 mm Max. collet capacity: 18 mm Main spindle mount: Camlock D1-4" Main spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe is supplied with, among other things: Various chucks Collets Taper attachment Itodpfezxgy Eox Acpon Tool holder Follow rest Various other accessories and tools And more The D1-4 Camlock spindle mount allows for quick and secure changing of chucks. With 24 spindle speeds from 45 to 4,000 rpm, a center distance of 750 mm, and a turning diameter of 270 mm above the bed, this is a particularly versatile lathe. With a weight of approximately 950 kg, it is a stable and well-built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and usable accessories. Condition: used Location: Emmeloord Asking price: € 6450 EX Inspection and demonstration are possible by appointment. If you are seriously interested or require additional information, please contact us.

Condition: excellent (used), I am offering for sale a high-quality RÖHM KFD-HS 200/3 hydraulic lathe chuck, designed for professional CNC lathes. Itedpsz Snc Iefx Acpjn The chuck is in very good technical and visual condition. It looks practically new and appears to have been used only a few times. The working surfaces and guides show only minimal signs of use. The set includes: * RÖHM KFD-HS 200/3 lathe chuck, * 3 standard jaws, * 3 RÖHM 538-55 top jaws, * operating wrench, * sturdy wooden transport box (I am not sure if this is the original box for this chuck). Technical data: * Manufacturer: RÖHM * Model: KFD-HS 200/3 * Diameter: 200 mm * Type: hydraulic 3-jaw lathe chuck * Maximum clamping force per jaw (Fmax): 48 kN * Total clamping force (Fges): 110 kN * Maximum rotational speed: 6500 rpm * Identification number: 155099 * Top jaws: RÖHM 538-55 * Country of manufacture: Germany The chuck is ideal for professional applications in machining and working on CNC lathes. It is a robust piece of equipment from the renowned German company RÖHM, which is valued for its high quality and precision.

Condition: good (used), Benzinger TNL / TRP I CNC Precision Lathe Manufacturer's specifications, deviations are possible. Center height: 80.5 mm Max. turning length: 100 mm Max. swing diameter over bed: 220 mm Max. swing diameter over cross slide: 130 mm Max. travel length in x direction: 300 mm Max. travel length in z direction: 240 mm Power supply: 380 V 50 Hz CNC Numerical Control: Bosch CC 100 T Accessories/Special Equipment: TRP Swing Loader Complete factory closure, large selection of storage platforms, pallet racks, shelving units, and paternosters. High-quality industrial machines, lathes, grinders, and hand tools Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items - new and used - in our shop! Iodpjhufc Eefx Acpjtn International shipping costs upon request!

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Itedpsvtpdgefx Acpsn Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm

Condition: excellent (used), Year of construction: 2018, Maximum workpiece diameter 285mm, maximum workpiece length 280mm, Bar capacity 38mm, X axis stroke 480mm, Z axis stroke 285mm, spindle speed 6,000 rpm, Isdpfx Aowb A Hcocpjtn power 5.5Kw, swarf conveyor.

Condition: excellent (used), functionality: fully functional, spindle bore: 28 mm, input voltage: 400 V, spindle nose: D1/$, spindle speed (max.): 4,000 rpm, spindle speed (min.): 45 rpm, overall weight: 850 kg, For sale: AI DR1 S lathe – very complete with accessories For sale: an AI DR1 S universal conventional lathe, complete with a comprehensive set of accessories. A robust and heavy-duty Dutch lathe, suitable for precise turning work and a variety of tasks in a workshop, toolmaking shop, or for the serious hobbyist. Technical data AI DR1 LS Center height: 133 mm Distance between centers: 470 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 145 mm Spindle bore: 26 mm Max. collet capacity: 18 mm Spindle nose: Camlock D1-4" Spindle taper: MC 4 Tailstock taper: MC 2 Longitudinal feed: 0.022 – 2.6 mm/rev. Metric thread: 0.2 – 7.5 mm Whitworth thread: 90 – 2 threads per inch Number of spindle speeds: 24 Spindle speeds: 45 – 4,000 rpm Motor power: 1 / 1¾ / 2½ hp Itedpjzxg Agjfx Acpsn Weight incl. standard accessories: approx. 855 kg Extensive accessories The lathe comes with, among other things: Various chucks Collets DRO EASSON Tool holder Follow rest Various other accessories and tools And more Thanks to the D1-4 Camlock spindle nose, chucks can be changed quickly and easily. With 24 spindle speeds from 45 to 4,000 rpm, a distance between centers of 750 mm, and a swinging diameter of 270 mm over the bed, this is a particularly versatile lathe. Weighing approximately 855 kg, it is a stable and robustly built machine, suitable for both fine precision work and heavier turning operations. A great opportunity for someone looking for a complete AI DR1 S with many original and useful accessories. Condition: used Location: Emmeloord Asking price: €8750 EX Inspection and demonstration are possible by appointment. If you are seriously interested or would like additional information, please contact us.

Year of construction: 2024, condition: new, functionality: fully functional, TECHNICAL DATA • Designed for beside the press operation (injection and blow moulding). • Six standard models, over 50 versions available. Iedpfx Acez Sqc Aspstn • Two rotor design available. • Slow rotor speed (155-275 RPM). • Standard screen in stainless steel. • IP55 control cabinet and electrical motor. • Quick opening and easy cleaning. • Noise level largely within European norms EN 12012-1. Utmost application flexibility CMG launches a new series of small size beside the press granulators with connotates of high caliber. The very innovative and unique attributes of such new series are several and all contribute to obtaining the highest degree of productivity, regrind quality (homogeneous particle dimensions and absence of dust), efficiency of operation and the best application flexibility. In its standard configuration the G17 granulators are applicable to processes of injection moulding and of blow moulding. In the ET1 or ET2 configuration, they are suitable for extrusion applications. The granulation capacitiy range is from 5 kg/h up to 90 kg/h. Precision cutting The new CMG series of G17 granulators is designed to obtain the most homogeneous regrind shape and dimensions, along with little to no presence of dust. One additional very unique benefit of this new line is the ability to produce regrind with very small dimensions. The great advantage of dimensionally small regrind is the possibility to add higher percentages to the virgin material with no influence to the quality of the finished product. Small capacity systems, injection moulding machines or extruders, are equipped with small diameter plastification screws, unable to process granules with dimensions exceeding those of the virgin granule. The G17 granulators produce rigrind which is dimensionally comparable to the virgin pellet.

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Itodpfx Acszlc Apopjn Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: good (used), Year of construction: 1998, functionality: fully functional, Schaublin 102 N, Machine number BL 329218, Year of manufacture approx. 1998, Center height 102 mm, Distance between centers 375 mm, Max. turning diameter over bed 200 mm, Max. turning diameter over slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories. Ijdpfx Aszlcz Escpotn

Condition: good (used), Scherer Feinbau PM 1 FZ precision lathe, finishing lathe, lathe similar to Weiler, with extensive accessories as shown in the pictures. Equipment: - Hand lever cross slide with Multifix quick-change system design Itsdpjz Ip Riefx Acpon - Collet chuck with draw-in collets Technical data: - Spindle bore: - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest diameter over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures. Shipping by arrangement.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Precision high-speed lathe make FEINBAU Itedpfxoz Rxh Ds Acpjn Machine No. 4891 Type PM1-FZB Year of manufacture 1982 Technical data : . Maximum turning length 90 mm Swing diameter over bed 220 mm Swing diameter over support 110 mm Center distance 160 mm Bore 23 mm Drive motor 0.65 / 1 / 1.3 kW Space requirement , length x width 1.6 x 0.8 x 1.2 m Scope of delivery : Collet chuck device for collets : K23 DIN 6341 Collets Hand lever cross support with adjustable stops Hand lever boring vise, with 2 x MK1 holders and stops . .. Ongoing purchase of used German machines without NC or CNC control .

Condition: used, Precision Lathe BOLEY Type 4 LE Conventional High-Precision Universal Multi-Function Machine Tool Serial No. 42562 Centre Distance 500 mm Swing over bed 240 mm Centre height over bed 120 mm Swing over cross slide 140 mm Centre height over cross slide 70 mm Spindle bore 23 mm Chuck mounting M40 x 3.5 mm external thread Tailstock taper MK 2 Quill stroke / travel 80 mm Spindle speed 30 - 1300 rpm Drive power 1.1 kW Power supply 400 V, 50 Hz - 3-axis digital readout RSF ELECTRONIC, Type Z503ST-220 - Position display HEIDENHAIN, Type VRZ 136B for rotary encoder - LCD display unit for measuring equipment on accessories Itodpfx Acsw Dvv Aepon - Spindle speed adjustable via 2 V-belt stages, 2 gear stages, and infinitely variable via variator belt drive - Longitudinal feed via change gears + set of change gears - Several 3-jaw and 4-jaw chucks Ø 100, 125, and 140 mm with chuck jaws - MULTIFIX quick-change tool post size A with 8 exchangeable tool holders - Vertical slide with clamp - Several clamps and vices - Clamping plates + fixture tables - Indexing table as dividing attachment - Dividing head with collets and tailstock - Heavy dividing attachment with clamping plate and handwheel drive - WOHLHAUPTER spindle tools and milling cutters + collets - Rapid-traverse spindle with pneumatic drive - Milling slide with collet chuck - External cylindrical grinding attachment - Live centre - Steady rest - VOGEL central oil lubrication - Built-in mini compressor (3.5 bar) in machine base - Compressed air maintenance unit for tooling - Operating manual - Machine mounted on steel plate (steel plate 1200 x 540 x 20 mm) Required space (L x W x H) 1650 x 950 x 1750 mm Weight lathe 660 kg (with steel plate) Weight of accessories 325 kg Very good condition

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: Iodpfowvq Tmex Acpotn For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Itedpocuhvusfx Acpjn Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock!

Condition: used, GE Druck Modular High-Precision Pressure Controller / Pneumatic Pressure Controller PACE5000 Professional High-Precision Pressure Controller for calibration, pressure testing, automation, and laboratory applications For sale is a used high-precision pressure controller from the manufacturer GE Druck. The PACE5000 is a modular, high-precision pressure control system designed for the most demanding applications in calibration laboratories, research, development, production, and quality assurance. Due to its high control speed and precision, the device is ideally suited for automatic pressure tests, calibration tasks, and industrial measuring and testing systems. Technical data: Manufacturer: GE Druck (Baker Hughes) Model: PACE5000 Device type: Modular High-Precision Pressure Controller Pneumatic Control Module: CM0-B-16G Dimensions: approx. 440 × 88 × 320 mm (W × H × D) Weight: approx. 10.1 kg Control range: -1 to 70 bar(g) Maximum permissible operating pressure (MWP): 94 bar Accuracy: up to 0.001% of the final value (model-dependent) Long-term stability up to 0.001% FV Features: Modular control system Very high pressure control speed Automatic pressure control Pressure testing Leak test function Burst test Switch test Programmable test sequences User-defined pressure units Display: Color touch display Graphical user interface Display of setpoint and actual value Intuitive menu navigation Interfaces: Ethernet USB Host USB Device RS-232 CAN IEEE-488 (GPIB) 24 V DC inputs/outputs Pneumatic connections: Supply Output Vent Reference G1/8" connection Power connection: 100–230 VAC 50–60 Hz Power consumption: max. 100 VA Application areas: Calibration laboratory Testing systems Quality assurance Automotive industry Aerospace Mechanical engineering Measurement technology Research & Development Automation technology Pressure sensor calibration Equipment: Color display Pneumatic Control Module Ethernet Itodpfxjziyqro Acpon USB RS232 CAN IEEE-488 (GPIB) Pressure connections Power cable Accessories as shown in the pictures Scope of delivery: GE Druck PACE5000 Power cable Accessories as shown in the pictures Weight: approx. 10.1 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age are present. The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors, and prior sale. We will be happy to answer any further questions by telephone or e-mail.

Condition: good (used), Precision lathe Scherer Feinbau PM 1 FZ Precision lathe Scherer Feinbau PM 1 FZ, finishing lathe, lathe similar to Weiler, with numerous accessories as shown in the pictures. Equipment: - Collet chuck with draw-in collets Technical data: - Spindle bore: Iedpoz Iptwsfx Acpetn - Spindle speeds: 700/1400/2800 (left/right) - Center height: 110 mm - Center distance: 160 mm - Largest swing over bed: 220 mm Accessories: Draw-in collets 359 E K 23 as shown in the pictures Coolant system Shipping by arrangement.

Condition: good (used), functionality: fully functional, Technical data: Center height 110 mm Center distance 160 mm Spindle bore 23 mm Motor power 1.7 kW Speed adjustable via potentiometer, approximately 100 – 2,300 rpm Ijdpfx Acjz I Dk Repstn 3 preset speeds or 3 gear stages. Equipment: • Operating modes: Manual + Automatic • Pneumatic clamping device • Tilting tailstock with 2 spindles for collet chucks K 12, with switch for changing the direction of rotation (for thread cutting) • Hand lever cross slide with stops, consisting of transverse and longitudinal slides. • Multifix steel tool holder, size A • Collet chuck with collets • Mounting elements and machine light

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Iedpfx Acsxdmgvepetn Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: 4104064175, KITOTEC CT-12000-D high-precision cutting tool measuring machine (2021) KITOTEC CT-12000-D is universal high-precision measuring device for all cases: suitable for directly measuring of the special angles of drill, tap, end mill, reamer, inserts or saw, such as orthogonal rake, relief, helix, tool cutting edge angle, end cutting edge angle, pitch, core diameter, chisel edge, chisel edge angle relief, angle axial, radius centre measurement, crosshairs, simple and rotatable, chip angle and radial clearance angle. Measuring length 250 mm . Swivelling around 280 degrees with 300 mm sliding mounting plate. Dowel system can be repositioned. Measurement software Metric MT 9.02. The pixel resolution in the highest zoom level with conversion lens 0.5x is 2 microns. Included is Rollomatic Concentricity Pro with adapter plate. - Zoom system 12x with adapter 0,67x with angled optical system - attachment lense 0,5x - double guide rail system in Z and Y axis - Z axis 170 mm – pitch 1 mm with resolution, resolution 0.001 mm - X axis 100 mm – pitch 1 mm - Y axis 250 mm – pitch 5 mm (ball screw spindle) with measuring system resolution 0.001 mm - turning axis 280° with 150 mm with V-bloc, and rear stop, small V-bloc for smaller tools - LED cold light source with slot ring light and diffuser – movable - double LED spot light with goose neck arms Ijdpovi Enaofx Acpstn - back light, parallel with holder movable blue for automatic measuring functions - measuring software Metric MT 9.02 - interface to read out XZ axis to software - incl. NUC-PC 4K WIN 10 GB