Used Backup Nh C00 50A U 35 A U 32 A for sale (87,180)

Condition: excellent (used), For sale: a Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good, with normal signs of use visible, consistent with its operation. This geared motor is ideally suited for driving conveyors, feeders, production machines, mixers, packaging machines, and many other industrial devices requiring a reliable drive. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Power supply: 3×230/400 V AC Frequency: 50 Hz Motor speed: 1395 rpm Output speed: 140 rpm Torque: 22 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Fsdpfxoznb Txj Aggjgg Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the photos.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Perforated sheet metal floor - 10x lashing eyes - Shovel holder Fgjdpezy Aznofx Aggog Net: €5,571.43 / Gross: €6,630.00 Article number: DPT235281300.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (L x W x H): 280 x 130 x 20 cm • External dimensions (L x W x H): 465 x 179 x 197 cm • Loading height of the floor: 38 cm • Permissible total weight: 3,500 kg • Unladen weight: 614 kg • Payload: 2,886 kg • Chassis: Low-loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • robust steel fenders with non-slip perforated profile • reinforced perforated steel floor on the inside • screen-printed wood floor in the center, 18mm, non-slip and waterproof • very stable steel frame, welded • frame completely hot-dip galvanized • chassis with two additional longitudinal beams under the loading area • heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • stable ACME locking system: closes quietly, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • very low chassis for a low approach angle • excavator bucket holder • 10x lashing eyes on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • maintenance-free axles and damping systems designed for long journeys and heavy loads • spare wheel easily accessible, mounted on the side wall • reverse drive automatic • ALKO overrun device and parking brake • coupling head made of steel casting with integrated high-security lock ALKO • very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • Reversing light • integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about your specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated steel floor, badge_tracstrap Features: - Perforated steel floor - Shovel rack - TracStrap securing system Net price: €6,802.52 / Gross price: €8,095.00 Article number: DPT235321700.23 Technical specifications: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration Fjdpfszy A A Sjx Aggogg • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 781 kg • Payload: 2,719 kg • Chassis: Low-loader (wheels next to the superstructure) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel mudguards with non-slip perforated profile • Reinforced perforated steel floor, internally on the sides • Screen-printed plywood floor in the middle, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel rack • 10x lashing points on the side wall (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing down in the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive load securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side wall • Reverse drive automatic • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security ALKO lock • Very stable V-drawbar, REINFORCED • 13-pin plug • Complete LED lighting: Extremely bright, durable and reliable. • LED position lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor, badge_tracstrap Equipment: - TracStrap securing system - Perforated sheet metal floor - Shovel rack Net price: €6,449.58 / Gross price: €7,675.00 Article number: DPT235321700.22 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 320 x 170 x 20 cm • External dimensions (L x W x H): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 736 kg • Payload: 2,764 kg • Chassis: Low-loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the middle, 18 mm thick, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel ramps, steel galvanized, adjustable, L = 1.62 m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp locks, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator bucket rack • 10 x lashing eyes on the side panel (1000 dAN/kg), TÜV certified • Free choice of lashing points when lashing down on the perforated steel floor • TracStrap Kit (Heavy-Duty), TÜV-certified cargo securing system • Revolutionary system • First-class securing of tracked vehicles • Ready for departure in a very short time • Front wedges are adjustable and form the basis for positive cargo securing • 2x lashing straps (LC 5000 daN) for lashing over the tracks • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse automatic braking system • ALKO overrunning device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing lights • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis guarantee _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Delivery throughout Germany possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary transport license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are protected by copyright!! Fgsdpfx Aszy Dq Reggsg Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel holder - 10x lashing eyes Net: €5,689.08 / Gross: €6,770.01 Article number: DPT235321700.02 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/HU (German technical inspection): 2 years from first registration Fgedpfezy Dnpsx Aggog • Internal dimensions (LxWxH): 320 x 170 x 20 cm • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Tare weight: 686 kg • Payload: 2,814 kg • Chassis: Low loader (wheels beside the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor, interior, side • Screen-printed wood floor in the center, 18mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Perforated steel single ramps, steel galvanized, adjustable, L=1.62m • Stable ACME locking system: closes silently, loading ramps are held in place by safety clip fasteners, rubber buffer dampens noise • Very low chassis for a low loading angle • Excavator shovel holder • 10x lashing eye on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points for lashing in the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse driving automatic • ALKO overrun device and parking brake • Coupling head made of cast steel with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, long-lasting and reliable. • LED side marker lights at the rear • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT. - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer and repair workshop - for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, perforated sheet metal floor Equipment: - Perforated sheet metal floor - Shovel holder - 10x lashing points Net: €6,042.02 / Gross: €7,190.00 Article number: DPT235321700.03 Technical data: • Brand: Brian James • Model: Digger Plant 2 • Vehicle type: Construction machinery trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 320 x 170 x 20 cm Fgedpfxszy Dvgo Aggog • External dimensions (LxWxH): 512 x 232 x 197 cm • Loading height of the floor: 40 cm • Permissible total weight: 3,500 kg • Unladen weight: 731 kg • Payload: 2,769 kg • Chassis: Low loader (wheels next to the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Robust steel fenders with non-slip perforated profile • Reinforced perforated steel floor on the inside sides • Screen-printed wood floor in the center, 18 mm, non-slip and waterproof • Very stable steel frame, welded • Frame completely hot-dip galvanized • Chassis with two additional longitudinal supports under the loading area • Heavy-duty perforated steel ramp, continuous, steel galvanized, with spring support • Stable ACME locking system: closes silently, loading ramps are held in place by safety clamp closures, rubber buffer dampens noise • Very low chassis for a low approach angle • Excavator shovel holder • 10x lashing point on the side panel (1000dAN/kg), TÜV certified • Free choice of lashing points when lashing to the perforated steel floor • Maintenance-free axles and damping systems designed for long journeys and heavy loads • Spare wheel easily accessible, mounted on the side panel • Reverse assist system • ALKO overrun device and parking brake • Steel cast coupling head with integrated high-security lock ALKO • Very stable V-drawbar, REINFORCED • 13-pin connector • Complete LED lighting: Extremely bright, durable and reliable. • LED rear marker lights • Reversing light • Integrated rear fog light • Robust protection of the rear lights • Heavy-duty support wheel • 5-year chassis warranty _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, In this offer you purchase a used "EMC Isilon X400 - 32 TB " Agility and Flexibility: EMC Isilon X-Series is the first scale-out storage solution capable of scaling throughput from a few terabytes to over 20 petabytes and over 100 gigabytes per second (GBps), all within a single file system. Sale item: 1 x EMC Isilon X400 - 32 TB + 400G SSD/ 48G/ 2x10GE SFP + 2x1GE with the following equipment: 3x32 TB HDD/400GB SSD 3.5" 3x48GB Ram, 12X4G 6x6 metre CX42QSFP Hybrid Cable 3x KIT 2SFP + Optic 10GB (ISO00125223, -227, -388) 2x QLogic 18 Port QDR Switch (CNVS491200146, CNVS491200150) 10 GBE, Dual-Port SFP + Without Optic Isilon Software Upgrade Enterprise Snapshot IQ Condition: Fsdpfx Agorxcvdegogg This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been functionally tested and is equipped with the latest Isilon OneFS8 software. Shipping is possible on request!

Condition: good (used), Alignment tester, inclinometer, clinometer, shaft/spindle angle clinometer gauge -Manufacturer: A. u. W. Busch, alignment tester inclinometer -Type: V 35 -Dimensions of transport case: 400/265/H205 mm -Weight: 9.3 kg Fgodpfjzh Eutex Aggeg

Condition: ready for operation (used), Zeiss 608093 9203 ÄZ02 35/05 Path measurement 32 Prismo / Wegmessung 32 Prismo-ST 608093-9203-701, used, as good as new condition, 100% functional Fgodpfjzzixpox Aggsg

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Fgjdei Rqi Sspfx Aggog

Condition: good (used), Grinding wheel holder, standard flanges, special flanges, grinding wheel flange -Grinding wheel holder: with grinding stone -Mounting: Hole shaft cone Ø 32-35 mm Fjdpfxew Dpfqs Aggjgg -Grinding wheel: Ø 210 x 40 mm -Transport dimensions: Ø 210 x 70 mm -Total weight: 4.3 kg

Condition: refurbished (used), battery capacity: 625 Ah, battery voltage: 80 V, total height: 635 mm, total length: 1,030 mm, total width: 840 mm, Tested forklift battery for your lift truck – 80V 5PZS 625AH – special tray + 1 year warranty + incl. Aquamatik + incl. end connector & REMA 320 plug (other connectors available on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1,030 mm Width: 840 mm Height: 635 mm Weight: approx. 1,540 kg Suitable for the following and other models: Toyota 8FBMT35 Carer Z25HD Carer Z25KN Caterpillar EP30K Caterpillar ЕР30КРАС Daewoo B22/35 X-5 Daewoo B30 Daewoo B35 X Doosan B32X Doosan B35X-5 Hyster E2.50XM Fsdpfx Aoy Rnqxsggjgg Common battery sizes available, feel free to inquire. Transport possible.

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 8,093 h, load capacity: 3,500 kg, lifting height: 6,500 mm, mast type: triplex, power: 36 kW (48.95 HP), Equipment: cabin, lighting, sideshift, UNiCARRIERS Diesel Forklift - NISSAN YG-1-F-2-A-35-U Year: 2015 According to hour meter: 8,093 operating hours 3.5 ton lifting capacity 6.5 meter lifting height!! 3 meter overall height 36 kW Nissan engine - Triplex mast with full free lift Fsdpfxoy Ir Hro Aggsgg - Side shifter - Load guard - Cabin with heating - Lighting system - Original paint - Immediately ready for use - Front tires in good condition - Rear tires NEW! - Simple mechanical forklift! Sales price: €10,900 net Affordable delivery available!

Condition: new, Rexroth 2AD134D-B350A2-CS36-A2N1/S032, 3-phase induction motor, part number: R911311289, serial number: 2AD134-10850, unused, in opened original packaging, 100% functional. Scope of delivery as shown in the photos. PLEASE NOTE: Please request the costs for packaging and shipping separately! Fsdpoi D Nc Djfx Aggjgg

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, side door Equipment: - 6 lashing points - Lashing rails - Plywood walls Net: €3,941.18 / Gross: €4,690.00 Article number: BTP113261315.04 Technical data: • Brand: Blyss • Model: F1326HD • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 262 x 135 x 150 cm • External dimensions (LxWxH): 419 x 189 x 205 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low-loader (wheels beside the body) • Tires: 165R13C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, bolted V-drawbar • Hot-dip galvanized frame • Floor made of 15mm multiplex • Body made of plywood - plastic-coated walls • Roof made of plywood • 2-wing rear door with twist-lock closure, lockable • 2 maneuvering handles on the front • 6 lashing eyes recessed in the floor inside • Lashing rails mounted on both sides inside at the same height, h = xx cm • Forced ventilation on the side walls: 2x internal fans • Maintenance-free rubber spring axles from KNOTT • Shock absorbers incl. 100 km/h approval • Side door on the front right, lockable from the inside and outside • 2 supports on the rear for safe loading even when not hitched • Reversing automatic • KNOTT overrun device and parking brake • Plastic fenders • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to ask about any special requests! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates incl. customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! Fgsdox Tvgyepfx Aggsg We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair workshop - for over 30 years. - Errors, omissions and prior sale are subject to change -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - 4 tie-down points - Steel side panels - Accessories kit Net price: €545.38 / Gross price: €649.00 Article number: HEU075131035.01 Technical data: • Brand: TPV Trailers • Model: HL-EU0 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (L x W x H): 132 x 107 x 35 cm • External dimensions (L x W x H): 237 x 123 x 86 cm • Loading height of the floor: 50 cm • Permissible total weight: 650 kg • Unladen weight: 82 kg • Payload: 568 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 4.00-8 • Suspension: KNOTT rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Side panels made of 1.0 mm steel sheet with aluminum-zinc coating • Round knobs for attaching nets or tarpaulins • Continuous longitudinal supports (3 pieces) • Screen-printed plywood floor, 9 mm, continuous without joints, non-slip and waterproof • Eccentric locking mechanisms for the tailgate • Galvanized V-drawbar • Plastic fenders • Option to insert supports at all 4 corners for tarpaulin frames, lattice superstructures, side panel extensions, etc. • 4 tie-down loops mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • Can be easily parked upright • 13-pin connector • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop! - Feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright! Anhänger Zentrum BAUMANN GmbH Fgedpfozy Annsx Aggsg Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: ready for operation (used), Indramat stator for 2AD 132B-B35RB1 asynchronous main drive motor, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fgodpozv Hmgsfx Aggjg

Condition: ready for operation (used), Indramat rotor for 2AD 132B-B35RB1 asynchronous main drive motor, serial number: 2930, used, in good condition, 100% functional, scope of delivery as shown in the photos. Fedpfxszv Hmae Aggogg

Condition: ready for operation (used), Indramat 2AD180D-B350A1-BS03-D2N1 Asynchronous main drive motor SN: 512 / terminal board defective, used, good condition, 100% functional, scope of delivery as per photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Fodjudghlepfx Aggjgg

Condition: ready for operation (used), Heidenhain / Gildemeister VAP4 AES 2 / IN9853603 control board SN:6135032 from Gildemeister CXT 600, used, minor signs of wear, 100% functional, scope of delivery as shown in the photos. Fgedpfx Aex Errioggeg

Condition: excellent (used), For sale: a Grundfos SPK2-15/8 vertical multistage pump with a Grundfos MG 71A2-14FT85-B three-phase motor, rated at 0.37 kW. The pump is fully functional, tested, and ready for operation. It is designed for pumping coolants, emulsions, process water, and other liquids used in CNC machine tools and industrial installations. Normal signs of use are visible. Pump specifications: Manufacturer: Grundfos Model: SPK2-15/8 Version: AMA CVUV Flow rate: 15–35 l/min Head: 23–31 m Frequency: 50 Hz Fgsdpfx Agezn N Ausgog Motor specifications: Manufacturer: Grundfos Type: MG 71A2-14FT85-B Power: 0.37 kW Voltage: 3×200–220 V Δ / 346–380 V Y Frequency: 50 Hz Rated current: 1.92 / 1.10 A Speed: 2800–2840 rpm Power factor (cos φ): 0.82–0.75 Ingress protection: IP54 Insulation class: F

Condition: excellent (used), For sale: Lenze GSN04-1NHAR geared motor with a three-phase Lenze/WEG DERA071-32 motor, 0.37 kW. The unit is 100% functional, tested, and ready for operation. The technical condition is very good. Visually, it has normal signs of use resulting from operation, as shown in the pictures. Thanks to its compact design and worm gear, the geared motor is ideally suited as a drive for conveyors, feeders, production machines, packaging machines, mixers, and many other industrial devices. Technical data: Gearbox manufacturer: Lenze Gearbox model: GSN04-1NHAR Fgjdpfxeznclco Aggog Motor manufacturer: Lenze / WEG Motor type: DERA071-32 Power: 0.37 kW Supply: 3×220–240/380–415 V AC Frequency: 50 Hz Motor speed: 1370 rpm Output speed: 133 rpm Torque: 22.6 Nm Gear ratio: i = 10 Protection class: IP55 Insulation class: F Duty type: S1 Condition: 100% functional – tested. Normal signs of use visible on the housing. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Electromagnetic brake: 24 V DC Protection class: IP54 Fsdpfxjznaq No Aggogg Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Condition: excellent (used), mileage: 283,323 km, first registration: 12/2015, fuel type: diesel, axle configuration: 8x4, wheelbase: 2,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: AdBlue, air conditioning, central locking, crane, cruise control, electric window regulation, fog lights, navigation system, power mirror, soot filter, spoiler, trailer coupling, = Additional Options and Equipment = - Aluminum fuel tank - Leaf suspension - Power brake booster - Low noise emission - Speed limiter - Refrigerator - LED lights - Air suspension - Air horn - Particulate filter - Reversing camera - Sleeper cabin - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication - Towing hitch = Additional Information = Technical Specifications Number of cylinders: 6 Engine displacement: 12,419 cc Unladen weight: 18,025 kg Axle Configuration Front axle: Steering Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; Steering Functionality Lifting capacity: 6,070 kg Lifting height: 2,040 cm Crane: HMF 3220-K6, year 2015, mounted behind the cab Superstructure brand: AJK HYDROLIFT HLF20-5430 Condition Technical condition: very good Visual condition: very good MAN TGS 35.480 8X4 TRIDEM + 20 TONS AJK HOOKLIFT TIPPER + HMF 3220-K6 CRANE EURO 6 L PACKAGE 480 HP Fodpfjvl S T Uox Aggogg 8X4 TRIDEM DRIVE, LAST AXLE STEERABLE AND LIFTABLE AIR SUSPENSION WHEELBASE 360 CM DIFFERENTIAL LOCK TGS SLEEPER CAB WITH AIR CONDITIONING, AUXILIARY HEATER, NAVIGATION, LEATHER MEDIA SYSTEM AUTOMATIC TRANSMISSION WITH ENGINE BRAKE TRAILER COUPLING WITH HYDRAULIC CONNECTIONS AJK HOOKLIFT SYSTEM 20 TONS HYDRAULIC CONTAINER LOCKING TOOLBOXES AND STORAGE BOX HMF 3220-K6 CRANE 6X HYDRAULIC EXTENSIONS RADIO REMOTE CONTROL 5TH AND 6TH FUNCTION ON THE CRANE OIL COOLER FOR CRANE HYDRAULICS MAX LIFTING CAPACITY 6,070 KG MAX LIFTING CAPACITY AT 1,670 CM 1,330 KG MAX WORKING HEIGHT 2,040 CM CENTRALIZED LUBRICATION SYSTEM ON THE CRANE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Ladder rack pockets - Rear light bracket - Insert pockets Net price: €13,025.21 / Gross price: €15,500.00 Article number: ULM235482035.13 Technical data: • Brand: Unsinn • Model: ULM 4820-35-14 • Vehicle type: Long material trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 966 x 204 x 35 cm • External dimensions (L x W x H): 667 x 210 x 113 cm • Loading height of the floor: 78 cm • Permissible total weight: 3,500 kg • Tare weight: 1,055 kg • Payload: 2,445 kg • Chassis: High loader (wheels under the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant longitudinal beam chassis for safe driving characteristics • Hollow profile construction welded and completely hot-dip galvanized • Aluminum side panels, anodized, double-walled Fsdpozy Dtljfx Aggjgg • All side panels can be folded down and removed • Steel corner posts, removable • Stable drawbar extension, can be extended without tools, free drawbar length approx. 3100 mm • Extendable rear light bracket 2000 mm, flush with the top edge of the loading area • Max. loadable with 200 kg of long materials at body length • Max. trailer overall length 12000 mm to be observed • 4x ladder rack pockets 100 x 100 mm embedded in the floor • 4x insert pockets L = 300 cm, 90 x 90 mm • Maintenance-free rubber spring axles • Option to insert at all 4 corners for tarpaulin frames, grille attachments, side panel attachments or front wall extension • Stable long lever locks, recessed • Made of multi-layer glued screen printing plate, 18 mm, continuous without joints, non-slip and waterproof • 8 foldable lashing eyes, mounted recessed in the floor frame profile (600 DaN/kg) • 8 lashing eyes under the loading area • Maintenance-free rubber spring axle from ALKO • Axle with continuous axle body and individual wheel suspension • Reversing automatic • ALKO inertia coupling and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug • Reinforced support wheel, for safe parking of the loaded trailer _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealers & repair workshop for over 30 years. - Errors, omissions and prior sale excepted -