Used Bale Breaker for sale (906)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Ppodpfx Aszhkzrsbgju Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, For sale here is an ANIS ATS 110-75S-9CT-30kW baler, including cross-tying system (9-fold binding). The baler is in good technical condition and was only used sporadically. DIMENSIONS OF THE BALER - Total length: 9700 mm - Total width: 3700 mm - Transport width: 2300 mm - Height incl. chute: 3640 mm - Approx. total weight: 24 t - Ground pressure approx. 5 kg/sqcm - Heaviest part of the machine: approx. 6 tons CHUTE OPENING - Length: 1600 mm - Width: 1200 mm - Inspection door (glass) PRESSING CHAMBER - Piston stroke length: 2600 mm - WxH: 1100 x 770 mm - Volume: 2.2 cbm - The piston runs on solid rollers and is fitted with knives for cutting residual material. - The pressure on the pressing chamber (channel) is applied by two side cylinders and a simple lever system, allowing for consistent and even force distribution. HYDRAULIC EQUIPMENT Ppedsy Ayiqopfx Abgsu - Siemens electric motor, 4-pole, 400V-50Hz, 30 kW - Hydraulic pump (Bucher) const./peak 320/400 bar - Max. working pressure 290 bar - Denison hydraulic valves 24 VDC - Pressure monitoring with proportional valve cycle - Automatic oil temperature monitoring - Automatic oil filter monitoring - Automatic oil level monitoring - Oil volume: 600L - Max. press force: 740 kN / 74 t - Specific pressure: 87 N/sqcm PLANT THROUGHPUT - Volume per press operation including pre-compression: 1.76 cbm - Average cycle time per press operation approx. 40+8 sec. - Cycle time without material 22+8 sec. - Binding time 30 sec. - Theoretical volume without binding 1.84 m3/h - Average working volume 123 m3/h - Capacity at material density 30 kg/m3: 3-4 t/h BALES - Bale length: 500 - 2000 mm - Bale width: 1100 mm - Bale height: 770 mm

Condition: good (used), Year of construction: 1996, 2 pieces Fab. Hofmann Year of construction 1996 Bale size (channel size)= 80 x 60 cm Bale weight e.g. hay = 220 kg/bale with 1.4 m bale length Hydr. baling pressure = 300 bar Automatic bale tying with 3 wires Ø 3.1 mm Baling capacity approx. 5 t/h Motor power = 18 kW Podpfxertngcs Abgjpu incl. collecting screw under baler incl. electrical control with Wago PLC (year of manufacture 2022) undismantled

Condition: used, Siemens Sirius Psdpjtvhv Iefx Abgepu

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: V302591-20, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 41,000 kg, pressure: 280 bar, oil tank capacity: 2,450 l, power: 150 kW (203.94 HP), BOA Impress D130 B 110 with side compression – used baling press, professionally maintained Are you looking for a powerful, reliable, and readily available baling press? Then this BOA Impress D130 B 110 with side compression is an excellent opportunity. We acquired this press as a trade-in. The previous owner, a customer in England, used this BOA for years and has now opted for a new BOA system. This speaks volumes about the trust in the machine, the brand, and the service provided. The press was maintained throughout its entire service life by our own BOA service team in England. This maintenance was always carried out with great care, resulting in a well-documented maintenance history. The press was dismantled in working order and is currently in our storage facility, where it can also be inspected. Before delivery, the machine will undergo a technical check-up. Any parts that need to be replaced will be replaced by us, so that the press can be offered in good condition. Why this BOA D130 B is interesting The BOA Impress D130 B 110 is a heavy-duty industrial baling press with high pressing force, suitable for intensive use and high capacities. Thanks to the side compression and robust design, this is a strong solution for companies that want to efficiently process large volumes of material. Pedpfx Abey Tnzcjgspu Technical specifications Type: BOA Impress D130 B-5V-1.6 Design: D130 B 110 with side compression Hydraulic power: 110 kW Main pumps: 2 × 55 kW Counter-pressure pump: 5.5 kW Filter pump: 5.5 kW Oil cooler: 4 kW Operating voltage: 400 V / 50 Hz Insulation class: IP55 Hydraulic working pressure: 280 bar Oil tank capacity: 2,450 liters Pressing force: 1266 kN / 126 tons Specific pressing pressure: 10.5 kg/cm² Press stroke: 2900 mm Chamber size: 1100 × 1100 mm Press chamber volume: 3.51 m³ Bale length: adjustable, approximately 1400 mm Bale weight: up to approximately 1200 kg, depending on the material Number of binding wires: 5 vertical / 5 horizontal Filling hopper: 1620 × 972 mm Machine weight: approximately 45 tons Noise level: < 85 dB(A) Average cycle time under load: 20 seconds Availability: The machine is currently in our storage facility and can be viewed by appointment. Because the press is from our own trade-in stock, was dismantled in working order, and maintained by our own service team, we can provide a good overview of the technical condition and history. A robust, used BOA press with a known history, professional service record, and a check-up before delivery.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, pressing force: 130 t, filling opening width: 1,620 mm, filling opening length: 972 mm, bale width: 1,100 mm, bale height: 720 mm, overall weight: 43,000 kg, warranty duration: 6 months, pressure: 280 bar, oil tank capacity: 2,450 l, power: 110 kW (149.56 HP), year of last overhaul: 2026, This Impress D130-A-110 kW press is in new condition and has been completely refurbished. The press has been completely rebuilt, with almost all parts replaced by new components. Only the frame and some mechanical parts are still part of the original assembly. The main cylinder has been completely overhauled. In addition, all electrical components and the entire hydraulic control system have been replaced with new parts. The control panel is also completely new, ensuring maximum reliability, safety, and operational certainty. The standard configuration of this machine features horizontal strapping. Thanks to the prepared frame, this press can also be supplied with both horizontal and vertical strapping, making the machine flexible for use with various material flows. Applications: Paper and cardboard, mixed streams, plastic films, PET bottles, containers, (long) agricultural films, plastic tanks, car tires and bumpers, and much more. Ppedjy Tm H Repfx Abgeu As you have come to expect from BOA, this used machine can also be supplied with technical support, parts supply, and expert advice.

Year of construction: 2023, condition: used, New: Yes Empty weight: 41 kg Dimensions of cargo space: 340 x 290 x 410 cm Pjdpfxoxq Uprs Abgjpu Serial number: P21410070W Production country: JP Please contact Team DPX for more information Rated current (A): 1000 Poles: 3

Year of construction: 2024, condition: used, New: Yes Empty weight: 35 kg Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Please contact Team DPX for more information Pedeyaf Sqspfx Abgopu New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: used, functionality: fully functional, Year of construction: 2020, load capacity: 6,500 kg, Bale Clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully operational Pjdpoyi Nbhefx Abgspu Technical Condition: Good Description: Year: 2020 ISO 4A (61 cm) Capacity: 6,500 kg Sideshift Opening range: 530–2,740 mm Width: 2,200 mm Clamp arms: 1,800 mm ID: OS1866

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,500 kg, Bale clamp Pedpoyzvl Eofx Abgopu Condition: Ready for use and fully operational Technical condition: good Description: Year 2018 Capacity 1500 kg Sideshift Opening range 650-2020 mm Width 1320 mm Clamps 1000 mm For Linde mast 386 /391 standard ID OS1944

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 4,000 kg, Bale clamp Podoyzdaqspfx Abgjpu ISO Class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 4000 kg Sideshift Width 1450 mm Opening range 620-2380 mm Clamps 1600 mm ID OS1890

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully operational Technical condition: Good Psdpfjx N Dp Ijx Abgjpu Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1750

Condition: used, functionality: fully functional, Year of construction: 2008, load capacity: 1,600 kg, Bale clamp ISO class: ISO class 2 = 1,000 – 2,500 kg Condition: Ready for operation and fully functional Technical condition: Good Pjdpfxjyzdfme Abgepu Description: Year 2008 ISO 2A (41 cm) Capacity 1,600 kg / 500 mm Sideshift Width 1,070 mm Clamps 1,200 mm ID OS1935

Condition: used, functionality: fully functional, load capacity: 6,000 kg, Bale clamp ISO Class: ISO Class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: Good Ppodpfjw Ez Tcsx Abgju Description: ISO 4A (61 cm) Capacity 600 kg Sideshift Width 1,550 mm Clamps 1,400 mm ID OS1696

Condition: used, functionality: fully functional, Year of construction: 2015, load capacity: 3,600 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for operation and fully functional Technical condition: good Ppedpfxjw Ez Sxs Abgou Description: Year 2015 ISO 3A (51 cm) Capacity 3,600 kg Sideshift Width 1,700 mm Clamps 1,200 mm ID OS1694

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, Bale clamp Load center: 800 Ppodpfoyzdakjx Abgeu ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: good Description: Year 2021 ISO 4A (61 cm) Capacity 5,000 kg Sideshift Opening range 700-3,100 mm Width 2,100 mm Clamps 1,800 mm ID OS1889

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 2,000 kg, Bale clamp Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Pedpfxjx N Dp Uo Abgjpu Condition: Ready for use and fully functional Technical condition: good Description: Year 2018 ISO 2A (41 cm) Sideshift valve Capacity 2,000 kg Opening range 540-1,800 mm Width 1,020 mm Clamps 770 mm ID OS1751

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 5,000 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Pjdsw Dwrljpfx Abgjpu Description: Year 2021; ISO 3A (51 cm); Capacity 5,000 kg; Sideshift; Opening range 550-2,560 mm; Width 2,000 mm; Clamps 1,550 mm; ID OS1546

Condition: used, functionality: fully functional, Year of construction: 2017, load capacity: 4,000 kg, Bale clamp ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: Good Ppsdpfoyzdawex Abgsu Description: Year 2017 ISO 3A (51 cm) Capacity 4,000 kg Sideshift Width 1,450 mm Opening range 600–2,380 mm Clamps 1,600 mm ID OS1891

Condition: used, functionality: fully functional, Year of construction: 1995, load capacity: 720 kg, empty load weight: 475 kg, opening width: 2,350 mm, Bale clamp ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical condition: good Description: Kaup attachment T 413 GT bale clamp for white goods, max. load capacity: 720 kg at 350 mm, max. opening width: 2350 mm, clamp width: 670 mm, clamp height: 1050 mm. We have many other bale clamps and various attachments in stock! Ppodpfjy T Szaex Abgju

Condition: good (used), overall weight: 65 kg, Siemens circuit breaker, Podpfxoy N T Rzo Abgjpu Type: 3WL1216-4CB35-4EU4 Condition: already dismantled. Multiple units available, ready for immediate collection.

Condition: excellent (used), Year of construction: 2023, operating hours: 12 h, functionality: fully functional, machine/vehicle number: 630207349, HSM V-Press 825 Plus Pro – barely used, only 16 bales pressed For sale is an HSM V-Press 825 Plus Pro in exceptionally low-use condition. The machine has produced just 16 bales in total and is therefore practically as good as new. Ideal for businesses seeking a high-quality baler without paying the price of a new machine. Pjdpoyy Ddaefx Abgepu

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. New price: seen for €19,500 Pressure cylinder has been dismantled for transport, inspection possible by appointment. Psdeyzw U Uepfx Abgepu Further presses in stock.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Ppjdezff Smjpfx Abgsu Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, Equipment: documentation/manual, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Psdpfszd R Taex Abgopu Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750