Used Bale Breaker for sale (874)

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Bledpfx Abora A E Uopsc Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: good (used), NNP Kibbler lump breaker Bjdpfxjqw Uxds Abpolc Stainless kibbler, 7.5Kw motor, 3Ph

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed Blodpox R N R Hsfx Abpjc All chains replaced in 2023 Wrapping table Control unit Complete knife set Roller hold-down Air brake | Internal No.: 11349362

Condition: like new (used), NNP fruit breaker Stainless, variable speed infeed conveyor, 370mm belt width, previously used on blocks of fruit, mobile, 3Ph Bjdekyr Iyepfx Abpelc

Year of construction: 2019, condition: used, overall weight: 1,400 kg, load center: 600 mm, load capacity: 12,000 kg, working range: 2,200 mm, machine/vehicle number: 449297, Hersteller: Durwen Typ: 805.5122-12.01 Aufnahme: Pin-Type / Direktmontage Bauart: Ballenklammer mit Seitenschub Baujahr: Abmessungen: • Gesamtbreite: 2240 mm • Bauhöhe ohne Gitter: 930 mm • Gesamthöhe mit Gitter: 1200 mm • Innenmaß zwischen Trägern: 530 mm Öffnungsbreite: • min: 200 mm • max: 2200 mm Kapazität / Leistung: • Tragkraft: 12000 kg • Lastschwerpunkt: 600 mm Gewichte: • Eigengewicht: 1400 kg • Vorbaumaß: 450 mm Ausstattung: Bljdpfx Ajxw I E Hjbpjc • Seitenschub vorhanden • Hydraulik komplett funktionsfähig • Klammerarme Heavy-Duty Ausführung

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Blsdpfxox Rbtge Abpsc Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Bjdex Sqlnjpfx Abpjlc Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Bledpox Sq Rdofx Abpsc Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Bale weight: 600 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 290/02, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials Bsdpfx Abjyghhhspolc

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Bjdpfow E Htujx Abpelc Machine decommissioned

Condition: ready for operation (used), Year of construction: 1996, A Pallmac blank separator for the automatic separation of die-cut cardboard blanks in folding carton and cardboard processing lines is available. An on-site inspection is possible. Bljdpex I Rqisfx Abpjc

Condition: used, Used Crusher for Filter Cake / Lump Breaker Drive: Lenze Bljdpfx Abebpia Dopsc The crusher for filter cake or lump breaker consists of two horizontal rotating shafts.

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Bedpox Aw Sysfx Abpolc Technical Data: Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: reconditioned (used), bale length: 1,200 mm, bale width: 700 mm, bale height: 800 mm, bale weight: 380 kg, Press in perfect condition after overhaul, unused. Serviced exclusively by the manufacturer. Perfect condition. Fully automatic operation. Adjustable bale length: 600–1200 mm. Bale weight approx. 380 kg. Blsdpfx Ajx S Sbdsbpoc

Condition: excellent (used), Year of construction: 2019, operating hours: 6,009 h, Year 2019. Actual hours: 6009 h Single owner Tractor fully serviced with 6 months or 500 hours warranty on engine and transmission. Blodpfxoygkygj Abpjc

Condition: like new (used), Year of construction: 2021, operating hours: 7,226 h, Year 2021. 7,226 actual operating hours. RTK technology. Single owner, fully inspected, with 6-month warranty on engine and transmission or 500 operating hours. Bljdpfx Ajygku Dobpoc

Condition: excellent (used), functionality: fully functional, filling opening width: 1,600 mm, filling opening length: 2,200 mm, bale width: 400 mm, bale height: 400 mm, total width: 3,345 mm, total height: 3,160 mm, total length: 7,440 mm, input voltage: 380 V, overall weight: 28,000 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Baler 400 x 400 mm. Very good condition. Well maintained. Bjdexcazwspfx Abpelc

Condition: used, Year of construction: 2002, functionality: fully functional, The machine worked perfectly before disassembly. It is in good condition and free of any cracks. Blodpfx Asyacyxjbpec

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Technical specifications: Bjdpsycf R Sefx Abpjlc Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Pressing force: 115 t Operation: Horizontal, fully automatic Bale weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST!

Condition: used, Year of construction: 2007, power: 7 kW (9.52 HP), FOR SALE OR RENT: VERTICAL BALER! (Rental available in Lithuania, Latvia, Estonia, and Poland) Technical Details: Manufacturer: HSM Model: HSM 500 VL Pressing Force: 54–540 kN Bale Size: 1200 x 800 x 1200 mm Bale Weight: approx. 500 kg Blodpsycfxcefx Abpsc Max. Bale Size: approx. 1200 x 800 x 1200 mm (W x D x H) Press Chamber Dimensions: 1200 x 800 x 1520 mm (W x D x H) Motor: 7.5 kW Year of Manufacture: 2005 PRICE ON REQUEST!

Condition: used, Year of construction: 1994, pressing force: 40 t, power: 22 kW (29.91 HP), Horizontal Baler for SALE/RENT BAUER 300 The baler is in good working condition (previously used in a printing plant)! Bedpfx Abeycfv Iepslc Technical specifications: • Installation of a secondary raw material baler • Manufacturer: BAUER • Model: 300 • Year of manufacture: 1994 • Power: 22 kW • Pressing force: 40-50 t • Dimensions of the baler: 10,300 x 2,000 x 3,000 mm • Tipping weight: approx. 400 kg PRICE ON REQUEST!

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALER PAAL KONTI 425 C Technical data: Manufacturer: Paal Model: Konti 425C Year of manufacture: 1995 Feed opening: 102 x 175 cm Drive power: 170 kW Compression force: 85 t Configuration: Horizontal, Fully automatic Bale weight: 500-650 kg Press weight: 25 t Bedpfoycfuqsx Abpelc PRICE ON REQUEST!

Condition: used, Year of construction: 1995, power: 2 kW (2.72 HP), Vertical Baler HSM 45 VL for SALE/RENT! Manufacturer: HSM Model: 45 VL Year of manufacture: 1995 Bledpfx Asycfhkobpjc A total of 8 units available. SALE PRICE: €1,200 per unit (EXW Lithuania)

Condition: good (used), Year of construction: 1994, pressing force: 50 t, power: 22 kW (29.91 HP), We are offering for sale a BAUER 400 baler Technical specifications: Secondary raw material pressing installation Manufacturer: BAUER Model: 401 Year of manufacture: 1994 Bodpfx Absycd N Tspjlc Power: 22 kW Pressing force: 40-50 t Dimensions: 10300 x 2000 x 3000 mm Tipping weight: ~400 kg PRICE ON REQUEST!

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Bsdpfx Asxmk Ivebpelc Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.