Used Bale Breaker for sale (854)

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Gjdpfx Amoyz Af Eoneub Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Guedpoip D Rpjfx Amnjb

Condition: used, functionality: fully functional, total length: 1,000 mm, load capacity: 2,500 kg, Bale Clamp Condition: Ready for use and fully functional Technical Condition: good Description: Bale Clamp / Rotating Clamp – suitable for forklifts Lifting Capacity: 2,500 kg | Condition: good, fully operational Robust bale and rotating clamp designed for professional use in warehousing, recycling, manufacturing, and paper handling. The unit is fully functional, immediately ready for operation, and in good technical and visual condition. Technical Data: Type: Bale clamp / Rotating clamp Capacity: 2,500 kg Length: approx. 1,000 mm Opening width: as specified by device (see photos / inspection) Back width: on request Projection: on request Dead weight: on request Condition: technically good, visually good Location: available immediately Gujdpex Aw Syjfx Amnob Notes: Sale as-is in current used condition. All prices are net plus 19% VAT. Sale exclusively to commercial buyers with valid VAT ID. No warranty or guarantee. Charger note does not apply to attachments, but is systemically retained.

Condition: used, functionality: fully functional, Year of construction: 2013, load capacity: 850 kg, empty load weight: 610 kg, opening width: 2,400 mm, Bale clamp Condition: Ready for use and fully functional Gedeuhwz Repfx Amnsub Technical condition: good Description: Fast and uncomplicated transportation possible by arrangement! The advertisement only serves to identify the device! A detailed description of the condition and possible equipment will be provided individually on request! Errors and prior sale reserved, sale only to traders... every sale of used goods takes place under exclusion of warranty and or guarantee.

Condition: excellent (used), Year of construction: 2024, Baling Press, Bramidan X30 LP, 30 t pressing force – used, as new: Price ex site: only €12,750 (net) Manufacturer: Bramidan Model: X30 LP Year of manufacture: 2024 Bale size WxDxH (mm): 1200 x 800 x 800 Filling opening WxH (mm): 1090 x 530 Cycle time (average, s): 25 Dimensions WxDxH (mm): 1760 x 1255 x 1995 Weight (kg): 1450 Stroke (mm): 950 Number of bindings: 4 Binding type: Tape / Steel wire Automatic bale ejector Bale weight: - Cardboard (kg): 225-325 - Plastic film (kg): 275-375 Pressing force: 30 t Material types: - Cardboard, plastic film, paper, PET bottles, aluminium cans, tin cans, rigid plastics, textiles, polystyrene. Noise level: 59-60 dB Low-profile baler with high pressing force Suitable for a wide variety of recyclable materials Low overall height High pressing force Very low noise level Up to 80% savings on volume, space, transport, and CO2 Powder-coated finish ensures durable, clean surfaces in various colours Gedpfxjx Uwfyj Amnsub Power supply: 3x400V 50Hz 16A Motor (kW): 4.0 Previous new price: €17,490 (net) Condition: very good Availability: immediately Location: 15745 Wildau (near Berlin)

Condition: ready for operation (used), Year of construction: 2022, Baling press for waste paper, paper, film, plastic, and other recyclable organic materials. Manufacturer: HSM Model: V-Press 825 plus pro - TCS system (TorsionControlSystem) – platen parallelism control - Automatic start/stop when doors are closed - Display + bale and operating hours counter - Manual tie-off (4 polyester straps) - Sliding door with handwheel locking mechanism Gedsyyy Dpjpfx Amnjub Machine dimensions: 1700 x 1250 mm, height: 2370 mm Loading aperture: 1195 x 540 mm Bale weight: up to approx. 280 kg Bale dimensions: approx. 1200 × 780 × 700 mm Throughput: approx. 2–5 bales/h Year of manufacture: 2022 Pressing force: 250 kN Motor power: 4.0 kW Machine weight: 1200 kg

Condition: new, Year of construction: 2023, _____Bale dimensions 1.20 x 1.00 - 1.50 mMax. bale weight 1,100 kgTotal length: 4.55 metersTotal height: 2.51 metersLoading system: Side loading arm with clamping deviceWrapping table: 4 beltsBale guide rollers on the wrapping table: 2 x adjustable Film end sensor, wrapping process stops when the film runs out or breaksVT 30 terminalFully automatic film cutter1 EW and 1 pressureless return or 1 DWSpecial equipmentMagazine for 4 film rolls,Storage location:null Guodpfxeki Eino Amnob

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Gsdpfx Aeh Dy Rfjmneub Wide Range of Used Machinery, Industrial Equipment

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Gujdpsic Rl Dsfx Amnsb Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg The hydraulic unit is functional, the drive motor is in the removed state.

Condition: used, Siemens Sirius Gedpfetvhv Iox Amnjub

Condition: used, 7 pieces for sale! Condition: Used, dismantled from decommissioned equipment. Untested. The item shows normal signs of use. Technical Data: Manufacturer: ABB Model/Type: VD4 36.12.32 Serial No.: 1VC1BF00013886 Year of Manufacture: 2015 Classification: M2 Standards: IEC 62271-100 / CEI 17-1 Weight: 170 kg Rated Voltage (Ur): 36 kV Rated Lightning Impulse Withstand Voltage (Up): 170 kV Rated Short-Duration Power-Frequency Withstand Voltage (Ud): 70 kV Frequency: 50 Hz Rated Normal Current (Ir): 1250 A Godpfxexq Nvye Amnoub Rated Short-Time Withstand Current (Ik): 31.5 kA Rated Short-Circuit Duration: 3 s Rated Short-Circuit Breaking Current (Isc): 31.5 kA Rated Short-Circuit Making Current (Is): 79 kA DC Component at ≤30% Voltage: 50 A Operating Sequence: O–0.3s–CO–3min–CO Wiring Diagram: 1VCD400236 Drive Supply Voltage: 220 V (EL3, MBC, MBO1, MBU, MAS) Origin: ABB, Italy

Condition: good (used), Year of construction: 1985, -KOM 421 Offered here is a Bunion brace of company Tigrip type TR 0.75 / 1050. The Bale clamp works mechanically and is therefore in perfect condition! Gripping area: 700 – 1050 Capacity: 0.75 t All other information, please refer to the pictures. Pick up is shipping for free-please enquire. Guodpfx Amjdl T Hlenjb You get a proper invoice with expelled VAT when purchasing Interest or questions, please register by E-Mail!

Condition: good (used), Year of construction: 2008, operating hours: 24,629 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,650 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 900 kg, overall weight: 24,000 kg, transport height: 3,000 mm, oil tank capacity: 2,000 l, power: 90 kW (122.37 HP), volume flow: 1,350 m³/h, transport width: 2,400 mm, transport length: 10,000 mm, Good day, We hereby offer you, without obligation, a used baling press from the manufacturer Presona AB, model LP 100 CH2 S. The following technical data has been taken from the manufacturer’s operating manual and brochures. We cannot guarantee the accuracy or completeness of this information. Manufacturer: Presona AB, Sweden Model: LP 100 CH2 S Year of manufacture: 2008 Total operating hours: 24,629 hours (as of February 2026) Effective pump operating hours: 10,090 hours Main press force: 100 t Specific compaction force: 81 N/cm² Gujdpfx Amsymmmpensb Pre-press flap force: 50 t Fill chute dimensions: 1,650 x 1,100 mm Fill volume per press cycle: 3 m³ Bale dimensions: 1,100 x 1,100 mm Drive power: 2 x 45 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 2,000 L Transport weight (press only after disassembly): approx. 25 t Note: The machine was used in a recycling facility for compacting paper, cardboard, and films/foils. The press is in good condition and will be replaced by a new, larger machine in July 2026. Until then, it can be viewed in operation with materials processed. We would be pleased if this press is of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 290/02, functionality: fully functional, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine Gedpfx Aeyghhhsmnjub The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: good (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, overall weight: 26,000 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), Good day, We hereby offer you, without obligation, a complete, used baler line comprising a BOA chain belt conveyor, type 1500 HS 29° KTH 3000 *13625 * 1500, a BOREMA PET bottle flattener type L 1600, and a BOA baler, type 2040, with wire tying stations and bale chute. The following technical data has been taken from the manufacturer's operating manual and brochures, for the accuracy and completeness of which we accept no liability. Baler Manufacturer: BOA Type: 2040.S.4V (6) 71.30 Year of manufacture: 2002 Operating hours: approx. 66,568 (as of October 2025) Actual pump run time: 13,614 hours (as of October 2025) Number of bales pressed: 139,167 units (as of October 2025) Main press force: 71 t Specific pressing pressure: 9.0 kg/cm² Feed hopper dimensions: 1,620 x 1,080 mm Bale dimensions: 1,100 x 720 mm, length adjustable from 800 to 1,600 mm Drive power: 45 kW Tying system: 4-fold vertical, fully automatic Machine weight (press): approx. 26 t Note: The machine was used at a recycling facility for compacting paper, cardboard, foils, and PET bottles. The press is in good condition and can still be inspected under power, but without material throughput. We would be pleased if this complete baler line is of interest to you. Guedpfjymldtjx Amnsb Your service team at Mertens & Frowein GmbH

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Gusdpfx Aeip D Rzjmnob

Year of construction: 2016, condition: ready for operation (used), Pressing force: 50t, opening dimensions: 870x1500mm, bale dimensions: 1500x1100x1100mm, bale weight: 450kg, length: 1524mm, width: 2100mm, height: 3217mm, weight: 1.93t, operational hours counter: 18h. Guedjirakgspfx Amnjb

Condition: used, Year of construction: 2003, equipment belts automatic bundling of parts up to 6 meters Gjdpfx Amoycxtmonsub retaining forks rollers for feeding towards automatic strapping

Condition: ready for operation (used), Pressing force 60s tons Dixi 60s baler, year 2006-2012 costs 4,000 EUR YEAR 2018-2020 costs 5,500 EUR Bale dimensions: 120 x 80 x 110 cm Press dimensions: 1900 x 1400 x 2200 mm (height) Press weight approx. 2,430 kg Bale weight up to 500 kg Oil heating Motor 7.5 kW Brand new exhibition unit costs 11,000 EUR Gedpfjra Nqhjx Amneub

Condition: ready for operation (used), Year of construction: 2003, Technical data of baler 18S: Motor: 4 kW Connection voltage: 400/50 V/Hz Gedsra Aghopfx Amnsub Pressing force: max. 180 kN Cycle time: 22 s Pressing time: 12 s Filling opening W x H: 107 x 62 cm Loading height from floor: 98 cm Ejected bale* W x H x D: approx. 110 x 70 x 70-80 cm Bale weight: max. 120 - 180 kg Dimensions W x D x H: 152 x 95 x 197 cm Weight: 850 kg Year of manufacture 2003-2005 costs 3000 EUR Year of manufacture 2006-2009 costs 3500 EUR Year of manufacture 2010-2013 costs 4500 EUR Year of manufacture 2016-2018 costs 5000 EUR

Condition: used, Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Gedpfjv Al Tijx Amnjub Power (kW): 4kW Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Year of construction: 1998, pressure:8 t box opening:750 x 500 mm box depth:450 mm material:Pappe,Plaste - cardboard Feed opening:690 x 500 mm voltage:230 / 50 V / Hz transport measurements machine:900 x 600 x 2150 mm Gusdpsufudwsfx Amnjb Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm

Condition: good (used), Year of construction: 2013, 14 pcs medium voltage vacuum circuit breaker to open cell ( on wheels ) 24kV, 1250A, 25kA/1s, 3 phase, 2 pcs open coil 110V DC, 1 pc close coil 110V DC, motor drive 220V AC/DC, producer ABB model VD4.24.12.25, rok výroby. Gsdpfx Amevv Huhsnjub

Year of construction: 1982, condition: good (used), machine/vehicle number: 14320, Vertical Baling Press Gusdpfxeiuky Io Amnjb

Condition: used, Year of construction: 2014, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Li Year of manufacture: 2014 Gjdpsyibymofx Amneub Pressing force: 40 t