Used Baler for sale (246)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 100 t, Technical specifications: Pressing force: 1,000 kN Specific pressing force: 121.2 N/cm² Drive power: 45 + 45 kW, frequency-controlled Voltage/Frequency: 400 V / 50 Hz Idle cycle time: 8.3 s Theoretical idle throughput: 643 m³/h Theoretical capacity at 50 kg/m³: 32.15 t/h Feed opening width x feed opening length: 970 x 1,800 mm Bale width x bale height x bale length: 1,100 x 750 x 600–2,000 mm Bale weight: max. 700 kg or 800 kg, depending on material The baler feed system includes the following components: - 1 fully enclosed STADLER chain conveyor with appropriate shaft covers - 1 support and maintenance platform for conveyor and hopper - 1 STADLER conveyor - 1 automatic channel baler HSM VK8818 R FU (100 t) - 1 wire rack for 500-kg soft wire coils - 10 wire coil trolleys - 1 multi-control system for the baler - Full construction documentation and maintenance history - Serviced and maintained by the manufacturer Commissioning available upon request. Weight: 33,000 kg Tying method: wire Nwedpeygud Asfx Abdjc Processable materials: plastic film, mixed paper, cardboard, hollow HDPE/LDPE containers, and plastic bottles The system is operational and can be inspected during operation. The machine will be dismantled on 16/02 and can then be inspected at our facility. Immediately available!

Condition: like new (used), Year of construction: 2023, operating hours: 2,400 h, functionality: fully functional, machine/vehicle number: R40410, cutting force: 900 t, power: 371.43 kW (505.00 HP), empty load weight: 75,000 kg, COPEX REFLEX 900 ton mobile diesel shear baler (year 2023). Maintenance carried out by the manufacturer. Output: 10 to 22 t/h depending on the type of scrap to be sheared. Immediately available. Nwjdsxg Ekfjpfx Abdjc

Condition: not inspected (used), functionality: unexamined, Harris TGS 215 3-RAM metal baler, 16” square with 600kw hydraulic power pack and hopper Video of baler in operation available on request, further details and photos to follow Machine decommissioned Nwsdpfx Asw E Htusbdjc

Condition: ready for operation (used), Strautmann PP 1207 Pressure force 58 tons Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Nsdpfsra Aq Dox Abdowc Feed opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Njdpfjv Aiymex Abdowc Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Filling opening: 1190 x 600 mm Pressing force: 59 t / 580 kN Performance: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: sheltered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003–2007 I also have Strautmann PP 1207 balers from 2010–2011, price 5500 EUR I also have Strautmann PP 1208 balers from 2014–2015

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires and a chain conveyor. Bale press built: 1997 Chain conveyor built: 2015 Baler Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Nwjdjxvh Dyspfx Abdjc Schneider PLC Chain conveyor Horizontal floor section: 6000 mm Rise section: 12500 mm (30 degrees) Gooseneck This baler can be inspected in operation until the end of March.

Condition: like new (used), Year of construction: 2022, operating hours: 6,000 h, machine/vehicle number: 006424, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, warranty duration: 3 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, This very young baler is sold by Bollegraaf Recycling Solutions. This is a HBC100 (75kW) baler featuring cross wires, FULL HARDOX, and a Bollegraaf chain conveyor with Bordoflex. Both the chain conveyor and the baler are equipped with all possible options for maximum efficiency in baling all types of plastics. Both units were built in 2022 and have very few operating hours. The previous owner purchased a new Bollegraaf system and traded in the machines in question. After disassembly, this baler is sold with a 3-month warranty. HBC100K Baler (75kW) 390mm supports Intermediate hopper Conveyor chute Platform with caged ladder Additional photocells Frequency controller for the main motor for energy savings APCP (adaptive self-learning channel pressure control for consistently optimal bale weights) Njdpfexvh Ewjx Abdewc Cross wires (3 horizontal wires and 5 vertical wires) Full Hardox lining inside the baler Bale exit Hydraulic lifting mechanism for both knotting sections for improved accessibility/maintenance Bale length display Air conditioning on the control panel Chain conveyor frequency controller Hydraulic oil heater Hydraulic unit cooler 4G modem for remote support Chain conveyor Bollegraaf HBT 1200/1800*20400 Equipped with Bordoflex for extra chain protection Dirt discharge plate Supports Chain lubrication

Condition: ready for operation (used), Year of construction: 2003, Baling press HSM 500.2 VL Fourfold wire bale tying Bale dimensions (L x W x H, mm): 1200 x 800 x 1000–1200 Bale weight (kg): approx. 500 kg Technical data (L x W x H, mm): 1213 x 1824 x 2987 Feed opening (mm): 1200 x 565 Cycle time (sec): 35 Pressing force (T): 54 Power supply (V): 400 (three-phase) Year of manufacture: 2002–2005, price: 3,400 EUR Baler HSM V Press 500.2 VL Year: 2006–2008, price: 3,600 EUR Njdsra Ak Espfx Abdowc Transport height: 2600 mm

Condition: ready for operation (used), Vertical baler Dixi 50S PET Year of manufacture: 2019-2021 Bale dimensions (L x W x H) (mm): 1200 x 800 x 800 - 1100 Bale weight (kg): approx. 350-500 kg Nwodpfx Asv Amtkjbdec Technical data (L x W x H) (mm): 1600 x 1300 x 3100 Filling opening (mm): 1200 x 670 Pressing force: 50 tons Power supply: 400 V

Condition: excellent (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 59 Output (bales/h): 1-2 Max. bale size (mm): 1200x1100x1000-1200 Dimensions (L x W x H, mm): 1780x1150x2985 Power (kW): 4kW Njdjv Al Tiopfx Abdjwc Weight (kg): 2300 Year of manufacture: 2018-2019

Condition: used, Year of construction: 2016, Compressed air | Krone Comprima 150 CV XC Year of manufacture: 2016 Approx. 27,500 bales pressed All chains replaced in 2023 Wrapping table Control unit Complete knife set Roller hold-down Nodpex R N R Hsfx Abdewc Air brake | Internal No.: 11349362

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Nwodpfera A E Usx Abdjc Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, pressing force: 170 t, filling opening width: 1,020 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 1,100 mm, overall weight: 40,000 kg, oil tank capacity: 3,000 l, year of last overhaul: 2024, For sale is a used baling press system consisting of a chain belt conveyor for underfloor operation, with a feed hopper, a hydraulic pre-compactor with whirlulator, a MACPRESSE 111A baling press, two complete wire drawing frames with 5 wire reel stands each, without wire. Technical data baler: Nedpfxeu Th D Rj Abdewc Manufacturer MACPRESSE EUROPA S.R.L. Typ 111A Year of construction 1996, refurbished in 10/2024 Press power main press 170 tons Specific press capacity 14 kg/cm² Feed channel 1,800 x 1,020 mm Filling volume 2,5 cm³ Theoretic throughput rate 750 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 55 kW Tying system 5-fold horizontal, full automatic Throughput rate at a approx. 30 up to 35 tons/h, depends on material Volume hydraulic oil tank 3,000 l Transport dimensions of press with new machine feets 113,700 x 2,300 x 2,900 mm (l x w x h) Machine weight baler approx. 40 tons Comments: The baler was partially overhauled in our workshop and tested after completion of the work, please look at our functional video. The system was previously used to bale paper and cardboard from municipal collections. The contract was awarded elsewhere after the end of the contract period, so the complete system is for sale. The overhaul work carried out and the spare parts replaced can be found in the detailed photo documentation and in our quotation. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Technical data conveyor belt: Manufacturer Wagensfeld B.V. Type chain belt conveyor 1700 mm Year of construction 2017 Drive power 7.5 kW Belt speed 14 m/minute Length of infeed conveyor 6,900 mm Length of ascending belt 12,885 mm Length of gooseneck 1,747 mm Overall length 21,271 mm Pitch 32° Effective width 1,644 mm Height of drive shaft above ground 5,777 mm Wall height of feed conveyor 500 mm Wall height of ascending conveyor 880 mm Steel flights height 40 mm Distance between flights 1200 mm Transport dimensions conveyor disassembled 15,005 x 2,503 x 2,435 mm (l x w x h) Pit dimensions 11,500 x 2,700 x 1,015 mm (l x w x d) Remarks: The chain belt conveyor, built in 2017, was later made to fit the baler during the last installation of the baler in the Netherlands and is newly installed. The conveyor belt is in good, operational condition and has therefore not been overhauled. An installation drawing with the pit dimensions is available. Scope of delifery: 1 chain belt conveyor, Wagensveld B.V. 1 piece feed hopper with pre-compressor flaps 1 piece wirbulator 1 baler MACPRESSE, type 111A 2 wire drawing frames with wire reel stands, without wire 1 operating manual with CE declaration, electrical and hydraulic circuit diagram

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, input current: 238 A, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Nwsdpfx Abjvf E Avedjc Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Nwjdpfx Astvau Aebdoc Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Nodpstvat Tefx Abdswc

Condition: reconditioned (used), Year of construction: 2014, operating hours: 24,967 h, functionality: fully functional, machine/vehicle number: 004283-0030, pressing force: 122 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, warranty duration: 24 months, year of last overhaul: 2026, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC120s (90kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty. Nsdoxcir Eopfx Abdowc

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, functionality: fully functional, pressing force: 60 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 570 kg, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 30,143 hours, as of July 2025 Effective pump running time onl 6,527 hours, as of July 2025 Number of pressed bales 115,193 bales, as of July 2025 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Nwedsvn Tg Iepfx Abdjc Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Condition of the press: The press was partially overhauled in our workshop and then tested in manual and automatic mode. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Grease cartridges of the automatic roller lubrication system replaced Slide rails cut out from the press floor in the press room Underbody reinforced with welded sheets New HARDOX slide rails welded in Wire station with deflection rollers for the lower wire cleaned and made operational Slide rails cut out from the floor in the press channel New HARDOX slide rails welded in Both side walls of the press channel dismantled, derusted Worn side wall plates cut out Complete side walls covered with new wear plates and welded Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Machine checked, general maintenance work carried out and press tested in manual and automatic mode Comments: The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), functionality: fully functional, filling opening width: 1,600 mm, filling opening length: 2,200 mm, bale width: 400 mm, bale height: 400 mm, total width: 3,345 mm, total height: 3,160 mm, total length: 7,440 mm, input voltage: 380 V, overall weight: 28,000 kg, power: 55 kW (74.78 HP), Equipment: documentation/manual, Baler 400 x 400 mm. Very good condition. Well maintained. Nwodpfxexcazwo Abdsc

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 290/02, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz • Current consumption: 16 A • Motor power: 8 kW Nedjyghhhspfx Abdswc • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Year of construction: 2024, condition: new, Overview - of the different variants *Not every position is required: Optional: -Bale shredder MHB from 24.990 € net -MHZ straw mill from € 7,980 net -Special hopper 970 € net -Cyclone from € 3,750 net -Sheet metal silo demonstrator with discharge (only sketched in the picture) *optional, if you want to load with the wheel loader Unit price net from € 14,750 - Demonstrator Nwedpfx Aeff Sbijbdsc -Dedusting auger - length approx. 4 m 4 sieves are mounted on the underside, which are extracted. Unit price net from: 9.750 € - Extraction parts / hoses flat rate 945 € net - Complete control system Net unit price: € 2,750 -Demonstrator extraction unit MMJET 160 Demonstrator, with cleaning Connection 160, fan 2,2kw air capacity 1850m³ /400 V Automatic compressed air cleaning Unit price net from: 6.950 € -Baler B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with + - 20 kg from 59.995 € net *A reference system (baler) is located in zip code: 64579 Gernsheim Technical data: Bale size (WxDxH): 400 x 400 x 800 (height can be adjusted on request) Bale weight +/- 20 KG (depending on material) Capacity: approx. 30 bales per hour Storage container approx. 0.7m³ capacity Filling level sensors for min./max. filling level in the container Hydraulic pre-compressor Hydraulic compression ram Hydraulic unit, valve block with oil tank Pump 18.5 KW / 50 liters Rollers in the bale chamber for easy bale push-off Dimensions (l x w x h) 3105x2830x2455 mm Weight approx. 1500 KG mütek baling presses / wrapping machines are designed for the production of bales from a wide variety of materials such as shredded micanthus or elephant grass, wood chips, sawdust and shredded straw. straw. The machine is characterized by a robust design that guarantees consistent quality in continuous operation. quality in continuous operation. The baler compacts the material filled into the storage container without the addition of binding agents and packs the material into plastic bags. The volume of the material can be considerably with the baling press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18 % Atro. The container of the mütek baler can be fed automatically or manually and has a volume of approx. 0.7 m³. volume of approx. 0.7 m³. Containers with a larger volume or with an attached suction and filter system as a complete disposal unit are also available. In addition to automatic filling via deduster, mütek also offers filling by means of screw conveyors. With both variants, automatic automatic dedusting is possible. mütek baling presses are equipped with a control cabinet for the control system. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adapted to your requirements on request. The following advantages arise in the production of bales: - simple and safe storage - No loose dust - Minimization of the storage volume - Low transport volume *Requirements for source material: - dry (max. 30 % ATRO) - Maximum length 35 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Paper/Waste Baler JONGEJANS model: DBF145_00_h00004 Number of filters: 84 Needlefelt polyester Filter surface area: 145 m² Installed components: Briquette press CS3-12 Njdpfx Abjxk N Dwjdowc Cleaning fans 1.5 kW

Condition: excellent (used), Year of construction: 2019, operating hours: 6,009 h, Year 2019. Actual hours: 6009 h Single owner Tractor fully serviced with 6 months or 500 hours warranty on engine and transmission. Njdjygkygepfx Abdswc

Condition: like new (used), Year of construction: 2021, operating hours: 7,226 h, Year 2021. 7,226 actual operating hours. RTK technology. Single owner, fully inspected, with 6-month warranty on engine and transmission or 500 operating hours. Nwjdpfx Abeygku Djdjc

Year of construction: 2005, condition: reconditioned (used), SCREW COMPACTORS Screw compactors are designed to dispose of large quantities of material. Even bulky materials can be compacted effectively. Steady rotation of the auger shaft draws the material to be compacted into the high-performance compactor. Compaction takes place in the adjacent container. Compared to piston presses, up to 60% higher content weights of the containers can be expected here. used functional machines Price from 3.300 € according to condition, VAT excluded. Nodpfx Ajgypgaebdswc Delivery possible