Thin layer from 2 mm thickness
Maximum cutting accuracy up to ± 0.15 mm
Minimal kerf, cutting thickness from 1.3 mm
Ideal for the cutting of dried and wet wood or alternative materials
Surface of the thin layer ready for gluing without need of further processing steps
Friendly user electronic control
Two programmable speeds of the carpet (0-30 m/min) for the best cutting quality and to safeguard the blade life
Optical sensor to start cutting cycle and speed change
Ground table
“Flexam” belt feed...
Technical data:
Max cutting height: 420 mm
Max cutting width: 770 mm
Wheel diameter: 800 mm
Tape width: 100 mm
Max belt length: 5730 mm
Min tape length: 5680 mm
Pulling roller height: 140 mm
Pressure roller height: 140 mm
Extraction port diameter: 120 mm
Engine power: 11 kW
Voltage: 380V
Producer: NRA
Machine dimensions:
Length: 900 mm
Width: 1430 mm
Height: 2480 mm
Randhw7x
BRENTA model PARIL band resaw
diam 1100 x 95/115 mm wide wheels / saws.
Bdymw3xzkx
Main motor 1460 rpm 15 KW 400 / 660 volt with star delta switch
Manual blade tension, manual rise and fall top sawguide
Feedworks closing with counter – weight and speed variation though friction disk
Machine needs to be reconditioned but has no mechanical damage . this machine is rusty and friction disk needs to be replaced by freq inverter for example. A new paint would make it look totally different .
wheel diameter 800mm
motor power 11kW
variable regulated feeder (inverter)
pneumatic pressure of feeding roll
feeding roll height 170mm
pedal control
Bmu8tr2unb
screw band tension
year 2020
total weight 700kg
Full handling equipment suitable for a high speed single or double band resaw.
Bfaxn8drnv
Consisting of pack infeed, tilt, stick collector, cross feed, single board feeder, resaw infeed with orientation correction, resaw outfeed, cross feed, sword conveyor to allow rejection, automatic stacker, stick magazines (3x), pack outfeed. Complete with modern Siemens control system and all documentation. Maximum length 6m. Speed 80m/min.
band saw according to CE and with the following features
strong cast iron work table, inclinable
balanced cast iron fly wheels
saw blade guide, telescopic
saw blade tensioning indication
upper and lower saw blade guide
cleaning brush for the lower fly wheel
sturdy AL fences
max saw blade width 16 mm
suction connection under the table
micro switches on machine doors
work table dimensions 600 x 520 mm
working table height 900 mm
fly wheel DM 450 mm
fly wheel speed 700 U/ min
max cutting height...
Band resaw
Nbdjf
Make : STENNER
Model : VHJ 105
Wheel diameter : 1.100 mm (43 inch)
Width of wheel : 110 mm for sawblade width 130 (5”)
This machine has a tilted fence
Main motor : 22 kW (30 HP) CAUTION ! 220 volts 3 phase !
Currently no starter
Complete with a total of 77 bandsawblades.
Technische Daten:
fly wheel DM 800 mm
Max. cutting height 400 mm
Max. max cutting width 780 mm
tabel dimensions 580 x 810 mm
tildable table 15 Grad
Max. saw blade dimension 80 x 0,8 mm
saw blade length 5380 - 5530 mm
motor 11,0 kW, 400 V, 50 Hz
suction 2 x 100 mm
fly wheel speed 680 U/ min
Pzlx7qphm
suction DM 1 x DM 100 mm & 2 x DM 120 mm
compressed air 6 - 8 bar
machine weight: ca. 850 kg
machine dimensions L x B X H 1550 x 950 x 2500 mm
welded steel structure, fully closed
pneumatic bra...
Primultini 1100 band sawing line with cut-off or centre cutting device
the mechanization is from Jonab AB and consists of:
-lifting table
- Slat removal belt
- Cross conveyor
- Conveyor belt feed to the machine left or right
Please also visit my other advertisements.
I look forward to your inquiry.
Gtek3bywq
Latest technology and performance: WRAVOR WRC 1150 AC band saw from WRAVOR to achive:
- maximum cutting capacity.
- minimum labour.
- faster hydraulic functions for log manipulating, possible new patented system for logturning systems.
- the fastest moving head with saw with special Servo Drive system - on demand!
- many options of equipment on the saw.
- construction improvements.
- high degree of automatization with Siemens program or Unitronics, always with option with manual control.
All mac...
ID000275Used mobile automatic strapping machine - manufacturer Band-A-Matic, - model F20, 220 volts,- mobile on 4 wheels, - dimensions (LxWxH) 900mm x 600mm x 750mm,- 2pcs you need more information about the equipment, please contact our manager.
N2dln
HOLZMANN HBS 500 band saw
Manufacturer HOLZMANN
Model / type of the HBS 500 machine
Production year 2014
Machine category Band saw
Location
Gorzów Wlkp.
Conditions of delivery
OWN COLLECTION
Cost of delivery
Customer cover
Startup Type
Iejqh3r
to be agreed
Description
Comments
2.2 kW ENGINE, 500 mm WHEEL DIAMETER, TABLE SET AT ANGLES, VERY GOOD CONDITION, ADDITIONAL SAWS AS TOOLS
ID000277Used splitter resaw with two blades ARI TKL 70 - Number of blades 1-2- Saw blade diameter 500 - 700 mm- Maximum cutting depth of 180/280 mm- The feed rollers open at 2 x 250 mmShaft Speed:- Saw blade diameter 500 mm - 1750 rpm- Possibility to cut at 0 - 45 degrees- Blade diameter 700 mm - 1400 rpm- Feed speed 0-85 m / min- Main electric motor 45 kW- Hydraulic electric motor 7.5 kW- Need for compressed air:- Working pressure 6 bar- Flow rate 20 l / min- Mixing unit pressure 6 bar- Flow ra...
width of the strips 100 mm
band length 915 mm
dimensions of grinding wheel 200 x 32 mm
grinding wheel hole diameter 30 mm
total power requirement 0,9 kW
weight of the machine ca. 35 Kg
dimensions of the machine ca. 620 x 540 x 300 mm
Engr2fxby
description
Optimal solution for sanding workpiece up to 300 mm.
* constant tape tension by pneumatic
* use hole sanding belt because of height adjustable table by spring pressure (also for safe work with small workpieces)
* different sanding belt sizes on demand!
motor power:
3 kW
size of sanding belt:
X7gqgzh8
300 x 2280 mm
speed of belt:
11 m/sec.
table size:
ca. 350 x 700 mm
required place:
ca. 1250 x 750 mm
weight:
280 kg
Bandsaw Canali 1100 with tilt hoist, in- and out feed, roller conveyors for package, lifting table etc.
1. Rolling conveyor with lift table
2. Tilt hoist
3. Band infeed with steering rulers
4. Bandsaw Canali 1100
5. Outfeed rollers, kick off left/rigth with dividing rulers
– – –
Category: Woodworking industry machinery
Status: Used, working condition
More info!
Bfagdawf2p
width of the strips 150 mm
band length 1220 mm
dimensions of grinding wheel 225 mm
work table: 150 x 400 mm
Table tiltable up to 90 Grad
table surface area 150 x 130 mm
connected load frequency 230 V
total power requirement 0,75 kW
weight of the machine ca. 35 Kg
Biata03nsz
dimensions of the machine ca. 650 x 360 x 400 mm
Order this product directly from L. Den Hartog Machines and ToolsSleepkabel 5 Ton Strong nylon tow belt with a strong hook with safety flap on both sides. Maximum 5 Ton. Length approx. 4.5 metres.
Ii7nuva7
Configuration:
Nowzd
It is a flexible and compact unit for the application of head and tail band on round and square book blocks. This extremely easy to use machine is the perfect solution for medium and small book binding companies. The head/tail band is joined to the glue strip before being applied to the book spine. Due to its working concept the machine does not require cleaning at the end of the production.
3 manual adjustments.
Automatic head/tail band applicator.
Technical parameters:
S...
Band saw line AKE 16007 twin band saw line AKE 1600, the last band saw is a quattro, complete with feed (centering conveyor) and after saw e include:Band saw: AKE 1600, 7 unitsFeed conveyors: 7 feed conveyorsConveyors after band saws: 7 unitsCross conveyors under outfeed conveyor: 7 units Hydraulic stationsSharpening machinesAll electric and control system the attached files you will find images, dsaws can be sold separately.
Pu8eti
Dyrebo Resaw- line with Stenner VHET 120 dubbel bandsaw.
1. Package intake with 4 st chain approx.: 6 m.
Nov0f
2. Hydr. tilt hoist with 4 st arms.
3. Stickpocket with belt conveyor approx.: 6 m.
4. Elevator with side conveyor approx. 1 m with 5 st chains.
5. In feed with belt and side boarders approx.: 6 m.
6. Controller.
7. Stenner dubbel- bandsaw VHET 120, Machine nr: AK96178.
8. Belt outfeed with shark fen and pneum.. push left/rigth.
9. Stacker with 5 st chains, 5 st fork arms and fair endin...
Horizontal band saw Vesto ZHL 64 x 2Horizontal band sawManufacturer: VestoModel: ZHL 64x2Feed speed: 20 m / minMax length: 6.5 mMax cutting hight: 600 mmMain electric motor: 22 kWLog feed table length: 10 mMax m3 loaded: 15 - 25 m3Log elevator length: 2 m Log separatorLog feed conveyor length: 14 mConveyor after band sawAll equipment have hydrauilic system and all electric dy to you need more information about the equipment, please contact our manager.
Bqetl0w3zh
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.