Used Banding for sale (3,206)

Lange B 500 K

Call

Condition: as good as new (ex-display), Year of construction: 2023, Contour edge banding machine for hot melt glue application to 0.4 - 3.0 mm edge material →Direct glue application to edging material: Bottom infeed of glue granules resulting in spill proof glue pot. Quick heating-up time after machine omatic start of application roller after approx. 8-10 mins. 3otk9cdp →Pressure roller driven by gearmotor infinitely adjustable between 0-15 m/min. →Automatic edging feed-in and automatic cut-off operation for straight and curved workpieces via footpedal →Pneumatic cutt-off unit capacity max. 3 x 30 mm →Turntable D=600mm 6565debf3091e

more

Listing

Hüllhorst

(dealership location)

864 km

Lange B85 KF

Call

Condition: like new (used), Year of construction: 2021, Joining, glue specification, crosscut saw, combination cutter, radius and surface scraper Dm22lh

more

Listing

Barntrup

910 km

BRANDT KD 56

Call

total length: 3,100 cm, Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, Single-sided edge banding machine in right-hand version for hot melt adhesive gluing. Gluing section for hot-melt adhesive granulate. Glue supply below the glue roller. Glue application to the workpiece by means of a glue roller in synchronized and counter-rotation. Pozbzddmw Electronic glue pot temperature control. Automatic edge magazine for roll material and fixed lengths, incl. roll separating device and roll plate Diameter 800 mm Pressure zone with pneumatically driven main pressure zone and Special holding pressure roller for compressing the upper and lower glue joint Centrally adjustable top pressure Central manual chain conveyor lubrication Pivoting control panel at the machine infeed Cross-cut saw unit for front and rear edge overhang. High-precision linear guide. 2 motors each 0.18 kW, 200 Hz, 12,000 rpm, pulling cross-cut for high accuracy. Swivel range straight to bevel cross-cuts 0-15 degrees Flush trimming unit top and bottom with vertical and horizontal horizontal tracing 2 motors each 0.27 kW, 200 Hz, 12,000 rpm Scraper unit for PCV edges Scanning from above, below and sideways, for chamfering and rounding of pre-milled PVC edges. Edge thickness max. 3 mm, Buffing unit 2 motors for smoothing the edges at the top and bottom. 2 motors 0.09 kW each, individually suspended, inclined and height-adjustable Static frequency converter 200 Hz Electronic motor brakes for snipping and trimming unit Workpiece support extendable to 350 mm Noise protection cladding incl. central extraction nozzle diam. 100 mm Electrical equipment with modular control system for simplified service. Permissible ambient temperature min. +5°C / max. +35°C If the mains voltage fluctuates by more than +/- 10%, a voltage stabilizer must be installed. Workpiece thickness 8 - 40 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Edge thickness: * Fixed lengths 0.4 - 3.0 mm (max. 3 x 45 mm) * Roll cutting 0.4 - 3.0 mm (max. 3 x 30 mm / 0.8 x 45 mm) Feed rate approx. 9 m/min. Electrical 400 V, 3 phase, 50 Hz Connected load 3.8 kW Compressed air connection 6 bar Weight approx. 860 kg Machine length approx. 3,075 mm

more

Listing

Holz-Her Kantenanleimmaschine HOLZ-HER 1030 ARTEA

D - Nordrhein-Westfalen

856 km

Edge banding machines

Holz-Her Kantenanleimmaschine HOLZ-HER 1030 ARTEA

€34,590

Edge banding machine Edgebander Cehisa EP-7

Call

Condition: as good as new (ex-display), -Exhibition machine- Maximum user-friendliness, precision and reliability for years to come thanks to the torsion-resistant welded machine stand. TECHNICAL DATA Edge banding machine for edging and finishing of panel-shaped materials (e.g. chipboard, MDF, blockboard etc.) Edge thickness of rolls: 0.4 - 3 mm Edge thickness of strips: 0.4 - 5 mm Bh33gnypg7c Max. edge height: 55 mm Workpiece thickness: 8 - 50 mm Edge cross-section 5 x 50 mm (depending on material) min. Workpiece width: 70 mm min. Workpiece length: 180 / 210 mm Feed speed: 9 m/min. Control technology and operation: With rotating control panel, dust-proof. Extremely simple operation via the graphically supported 15.6" touchscreen and the VISE function and glue library. glue library. Glue application with Glu Jet: Highly flexible adhesive application using patented nozzle technology. EVA and PUR adhesives as standard can be processed without complex and expensive additional equipment. Neutral or colored adhesive can be changed in changed in no time at all. Lowest energy costs thanks to the shortest heat-up time of 3 minutes. Unit technology: Modern and solid processing units, continuously further developed based on our 50 years of experience in edge banding, ensure the high-quality high-quality processing of your edges and guarantee your product quality on the finished furniture. Tool technology: State-of-the-art milling technology tailored to your area of application. Accessories: The extensive range of accessories extends from nesting package through to high-tech spraying systems. . (Visual Setting Mode) As a digital logbook, VISE provides all setting values for the digital counters and pressure gauges to set up the machine quickly and safely. quickly and safely. The display is interactive via the 15,6? touch control panel. New exhibition machine

more

Listing

Wijchen

(dealership location)

725 km

Cehisa EP-7

€2,750

Edge banding machine up to 20 mm

Call

Condition: used, Edge bander Cehisa EP-7 Min workpiece length 120mm Min workpiece width 75mm Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 4kW J0orai Dimensions 3110x1800x1250mm (LxWxH), 750kg

more

Listing

D - Hessen

992 km

Holz-Her Perfect 1421

Call

Condition: used, Year of construction: 1989, Used machine Year of construction: 1989 Condition: Functionally tested Equipment and technical data: Qba903zau Glue thickness max mm 20 Gluing height max mm 51 Roll material thickness max mm 3 Workpiece length min mm 140 Workpiece width min mm 60 Glue system 1906 cartridge Printing unit Trimming unit 1920 Flush trimming up to 20 mm Chamfer trimming Space requirement LxWxH mm 3150x1800x1375 Weight approx. kg 800 Location: Hochheim Availability: Short term

more

Listing

Bitburg

902 km

HOLZ-HER / Holz Her Accord 1447

€3,300

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1995, Manufacturer HOLZ-HER Model ACCORD 1447 Machine type edge banding machine Year of manufacture: 1995 Item number 260/9-402 Location ex site Availability short term glue thickness max 30 mm 7ffxzdr Thickness of roll material max 3 mm Joining unit corner copying unit 4 motors scraper unit profile and flat Edge sanding Pneumatic indexing unit gluing height max 66 mm feed max 16 m/min Preheating zone gluing system Crosscut saw unit flush/radius/chamfer Buffing unit Edge sanding unit Strip magazine Left-hand machine version From customer site - immediately available - - can be visited with pleasure -

more

Listing

Hüllhorst

864 km

Hebrock HFF08 weitere

Call

Condition: good (used), We offer various molding machines for gluing or processing edges up to 2 mm. Ljc9aklxcr Hebrock, Lange, H&W. Many shapes are possible. Clarification according to sample or drawing.

more

Listing

Lange B 90 KFE Plus mit Fügen + Eckenkopieren

Hüllhorst

867 km

Lange B 90 KFE Plus mit Fügen + Eckenkopieren

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material Djh922 →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

more

Listing

HolzHer Kantenanleimmaschine HOLZ-HER 1317 Sprint

D - Nordrhein-Westfalen

856 km

Edge banding machines

HolzHer Kantenanleimmaschine HOLZ-HER 1317 Sprint

€12,680

Edge banding machine Edgebander Cehisa EP-9

Call

Condition: used, Control with LCD display, swiveling control panel, program memory, manual, self-clamping pressure bridge adjustment, feed by means of transport chain, workpiece support can be pulled out, joint milling station, diamond milling cutter in synchronous and counter-rotation, cartridge system with sensing nozzle, use of PUR adhesives possible, printing unit with driven roller, pneumatic control of the printing unit, crosscut saw with 2 HF motors, crosscut saw swiveling, flush / radius / chamfer trimming unit, pneumatic changeover milling unit, motorized positioning control milling unit, Milling tools with carbide inserts, corner copying unit with HM interchangeable plates, radius scraper, radius scraper with pneumatic changeover, Bruyvwbf chip catcher box for radius scraper, surface scraper, blowing nozzle at the surface scraper ----- Technical data ----- Edge thickness of roll material: 3 mm, Edge thickness strip material: 8 mm, workpiece thickness: 45 mm, Cutting blade for roll material up to: 3 mm, Suction nozzle Ø milling unit: 120 mm, suction nozzle Ø milling unit: 70 mm, suction nozzle Ø scraper unit: 70 mm, Compressed air supply: 6 bar, total length: 5.800 mm Sold as is, without technical inspection

more

Listing

Wijchen

(dealership location)

725 km

Cehisa EP-9

€3,950

Brandt Optimat edge banding

Call

Condition: used, Edge bander Cehisa EP-9 Biiepovwdzs Min workpiece length 120mm Min workpiece width 120mm Min/max workpiece thickness 8/45mm Min/max belt thickness 0.4/5mm Speed 10m/min Required air 6-7bar Total power 3.5kW Dimensions 3380x1800x1250mm (LxBxH), 925kg

more

Listing

D - Nordrhein-Westfalen

856 km

Brandt Optimat KDF 220 C

Call

Condition: used, Year of construction: 2009, Second hand machine Year of manufacture 2009 single sided edge banding machine in right hand version for hot melt gluing contact heating shoe for workpiece preheating Gluing section for hotmelt granules Glue supply underneath the glue roller glue application to the workpiece by means of glue roller electronic glue pot temperature control automatic edge magazine for roll material and fixed lengths pressure zone with driven main pressure roller as well as two holding pressure rollers centrally adjustable top pressure central manual chain lubrication control panel at the machine infeed Noise protection cladding with 3 suction nozzles centrally located above the aggregates each 60 mm diameter Electronic control easy control EC 10+ integrated line control for contactless control of machining functions edge thickness fixed lengths 0.4 - 3 mm max. 3 x 55 mm roller cutting 0.4 - 3 mm max. 3 x 45 mm/ 1.0 x 55 mm Feed rate approx. 10 m/min. Connected load approx. 10 kW Pneumatic connection 6 bar Total length 4280 mm Cfgniv27nd Infeed ruler adjustable in connection with joining part Joining milling unit 2 x 2,2 kW; 2 motors (1 x synchronous- 1 x counter-rotation) suction hood 120 mm trimming unit chamfer/straight 2 x 0.1 8 kW for trimming the front and rear edge protrusion Milling unit 2 x 0.27 kW for milling the upper and lower edge protrusion motors can be manually swivelled between flush and radius milling Shape milling unit top and bottom 1 x 0.35 kW for shape milling of head edges workpiece thickness max. 40 mm scraper unit ZK 6520 for chamfering or rounding of pre-milled PVC edges Surface scraper VKNR 5780 for removing adhesive residues in the area of the glue joint availability: short term

more

Listing

Holm

869 km

HEBROCK EURO 2000

€3,990

Fixed price plus VAT

Call

Condition: used, Year of construction: 1993, Machine number: nicht zutreffend, :1-3 mm B9yx2r09dm Workingpiece thickness from to:16-38 mm

more

Listing

Lennestadt

897 km

IMA Advantage 60

€16,400

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 2008, The basic machine consists of: · Base frame with integrated electrical installation drive for workpiece transport, Feed speed 16 m/min. · Transport chain with 80 mm width and 60 mm long chain plates Top pressure, equipped with: 2 rows of rubber wheels, electronic height adjustment upper pressure, workpiece thickness over Digital display readable · Horizontally adjustable, unheated stop ruler · User-friendly PC control with - Touch screen and graphical interface Simple, machining-related program creation - Integrated PLC and electronic pattern control - Program memory for up to 1000 programs · Safety and protective devices CE regulations. Sound absorbing/protective hoods for cross-cut and milling units support rail for wide workpieces, approx. 700 mm extendable The basic machine consists of: 3fpiizq · Base frame with integrated electrical installation drive for workpiece transport, Feed speed 16 m/min. · Transport chain with 80 mm width and 60 mm long chain plates Top pressure, equipped with: 2 rows of rubber wheels, electronic height adjustment upper pressure, workpiece thickness over Digital display readable · Horizontally adjustable, unheated stop ruler · User-friendly PC control with - Touch screen and graphical interface - Simple, machining-related program creation - Integrated PLC and electronic pattern control - Program memory for up to 1000 programs - Safety and protective devices according to CE regulations. Sound absorbing/protective hoods for cross-cut and milling units support rail for wide workpieces, approx. 700 mm extendable · Incl. Mounting material Separating agent information above and below Joining milling unit 08.376 for edge trimming/calibrating formatted workpieces or for milling lateral grooves, folding or profiling, Blow nozzle for removing loose particles on the workpiece side# Blow nozzle for removing loose particles on the workpiece side

more

Listing

Lange B 92 KFE - L-Motion / bis zu 7-Achsen

Hüllhorst

867 km

Lange B 92 KFE - L-Motion / bis zu 7-Achsen

Call

Condition: as good as new (ex-display), Year of construction: 2023, 6565debe964ff 7ooz7d2fty

more

Listing

Biersdorf am See

894 km

Edge banding machine Edgebander Biesse Akron 1320

SCM Olimpic K 360

Call

Condition: like new (used), Year of construction: 2020, Machine number: AH o2483, Functionality: fully functional, Machine absolutely as good as new - Control "Touch 7" with 7 inch color screen Nsmhhkgy - panel thickness min 8 mm max 60 mm - Gluing thickness of rolls 0.3 - 3 mm - gluing thickness of strips 0.3 - 6 mm - Feed speed 11 m/min - Joint milling 2 x 1.5 Kw 9000 1/min - Caps with 2 motors 0.2 Kw 12000 1/min - Flush/radius milling 2 motors 0.55 Kw 12000 1/min - Corner copying 1 motor 0.35 Kw 12000 1/min - Radius scraper - Surface scraper - Buffing 2 motors ,13 Kw 1400 1/min - Device for nesting - 2 x spraying device for release & cleaning agent

more

Listing

Wijchen

(dealership location)

725 km

Biesse Akron 1320

€9,500

Edge banding machine up to 100 mm gluing height !

Call

Condition: used, Year of construction: 2013, Edge banding machine Biesse Jade 340 Serial No. 40278 Year of construction 2013 Glue unit Edge trimming unit Fine trim unit Edge scraper unit Poloshing unit Panel height 10-60 mm Height of the edging material 14-64 mm Thickness of material to edgeband in rolls/strips 0.4-8 mm Panel overhang 25 mm Minimum panel length 150 mm Minimum panel width (with 140 mm length) 85 mm Minimum panel width (with 250 mm length) 50 mm Speed up to 12 m/min. Dust extraction system for each working unit 1 nozzle dia. 100mm Pneumatic connection 7 Bar Glue pot capacity (approximately) 2 kg Warm-up time glue pot at half load (approximately) 10 minutes 400V, 6kW Fioa9npf Dimensions 4200x900x1600mm, Weight 1200kg

more

Listing

D - Nordrhein-Westfalen

856 km

Lange B 70 K-100

Call

Condition: used, Year of construction: 2018, Manufacturer: Lange Maschinenbau Type: B 70 K Second-hand machine Year of manufacture: 2018 Machine up to 100 mm glueing height ! Equipment: Machine table with 13 rollers for better workpiece guidance Edge infeed, in synchronous run with the belt feed edge thickness adjustable via digital counter pneumatic roller separation with knife (for edges suitable for cutting) three pressure rollers belt feed 0,25 kW; approx. 1250 mm long; approx. 6,0m/min; 50mm wide toothed belt with thick, workpiece-protecting rubber cover. Digital counter for height adjustment Direct glue application to the workpiece: glue tank leak-proof with glue supply from the bottom and fast heating time after machine stop Flush trimming unit for workpiece front and rear edge, automatic scanning on the workpiece, pneumatic trimming with knife for trimmable edges Flush trimming unit with vertical scanning and horizontal guiding, reproducible adjustment by means of digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm, trimming cutter Ø 70mm, Z4, radius 2mm/15°; central suction port Ø 100 mm , 2 chip suction hoods with hose Ø 60 mm, automatic height adjustment of the upper milling cutter with the belt feeder Workpiece support continuous approx. 1800 mm long, workpiece support rail, approx. 300 mm extendable Rotatable foil plate Ø 800mm Technical details: Workpiece width min. approx. 80 mm Workpiece thickness 10 100 mm Workpiece length min. approx. 220 mm edge thickness 0.4 2.0 mm Roll cutting max.1.0 x 55 mm, 2 x 45 mm Heating capacity glue pot 2.7 kW Electrical connection 400V, 50 Hz , 3Ph + N Total connection 3,8 kW Heating time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm without foil plate Ø 800 Gzjxmkjuj Weight net ca. 260 kg Location: NRW Availability: Immediately

more

Listing

Holz-Her Kantenanleimmaschine HOLZ-HER 1308 XL AURIGA POWER

D - Nordrhein-Westfalen

856 km

Edge banding machines

Holz-Her Kantenanleimmaschine HOLZ-HER 1308 XL AURIGA POWER

€62,380

Call

Condition: as good as new (ex-display), -Exhibition machine- Highest ease of operation, precision and operating safety for years due to torsionally stiff, welded machine frame. Control technology and operation With rotating and swiveling control panel, dust-proof. Extensive program memory, complete recording of all operating data, service messages in plain text. Fully automatic operation of the machining units via NC servo axes Glu Jet Hybrid Technology Highly flexible adhesive application by means of patented nozzle technology for your optical zero joint. EVA and PUR adhesives can be processed as standard without complex and expensive additional equipment. Adhesives in cartridge and granulate form. Neutral or colored adhesive can be changed in no time at all. Lowest energy costs due to shortest heating time in 3 minutes. Automatic cleaning of the adhesive system at the push of a button. Aggregate technology Modern and solid processing aggregates, continuously developed based on our 50 years of experience in edge banding, ensure the high high-quality processing of your edges and guarantee guarantee the quality of your finished furniture. Tool technology State of the art diamond tipped milling technology technology with integrated chip removal and patented patented Air Stream System, each adapted to your your field of application. Accessories The extensive range of accessories extends from nesting package for cup band drilling to electronically controlled electronically controlled spraying devices that make reworking completely eliminate the need for rework. Also retrofitting of accessories is also easy thanks to the modular modular design. BASIC MACHINE with manual pressure bridge adjustment With welded base frame in stable construction. With industrial transport chain with non-slip surface pads. surface pads. With centrally adjustable pressure bridge with self-clamping (adjustment without tools). Safety hood over the finishing area lined with sound-absorbing material. With central lubrication of the chain guide bar manually via grease nipple. Powerful drive motor for smooth transport of workpieces. of the workpieces. With integrated chip box at the end of the machine. With integrated control cabinet for the electrical system, easily accessible. With potential-free electrical Bdrcky3e2xk contact for suction. With pneumatic locking roller for shortest workpiece distance at the machine infeed. TECHNICAL DATA Edge banding machine for edging and finishing of plate-shaped materials edge thickness roll material: 0,4 - 3 mm (depending on material) edge thickness strip material: 0,4-8 mm (depending on material) max. edge cross section: 6 x 42 mm max. edge height: 65 mm workpiece thickness: 8 - 60 mm (restrictions possible for individual aggregates) min. workpiece width: 65 mm min. workpiece length: 160 mm (without corner copying 1832) min. workpiece length: 180 mm feed rate: 10 m/min. Intelligent tool compensation: The intelligent tool compensation allows an intuitive adjustment of all milling and scraper machining operations. The operator can see at any time graphically which corrections are being made in which are being made. The values entered on the control entered at the control for horizontal and vertical and vertical tool infeeds are stored in the background

more

Listing

Kropp

835 km

HOLZ-HER STREAMER 1057

€19,500

Call

feed rate X-axis: 10,000 mm/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Condition: excellent (used), Year of construction: 2018, Machine number: 1057, Extendable workpiece support distance 600mm Edge thickness of rolls 0.4 - 3mm Edge thickness of strips 0.4 - 6mm Edge height max. 65mm Workpiece thickness 8 - 60mm (limitation possible for individual units) Workpiece width min. 65mm Workpiece length min. 160mm Feed speed 10m/min Swivel and rotatable control panel, ergonomically mounted on the infeed side with selector switches for setting the units, with temperature monitoring for the heating circuits of the adhesive application system. Dm0hur Units: Joint milling unit with two milling heads (70x64 left-hand rotation, 70x64 right-hand rotation), with adjustable infeed fence and height-adjustable milling cutters. Automatic transport of roll goods, single infeed of strip goods. Support plate diameter 820mm GLUEJET 2.3kw glue application system with automatic glue height adjustment. GLUEJET hybrid technology, processing of EVA and PUR adhesives in cartridge form. Processing of neutral and colored adhesives. Heating time in 3 minutes, manual reloading at the touch of a button, magazine capacity 1 cartridge approx. 330g. Pneumatic printing unit with 3 pressure rollers, first roller driven, 2 holding pressure rollers with pneumatic immersion control of the pressure rollers. Cross-cut unit pneum. Chamfering caps 0 / 10 degrees, pneumatic adjustment. Incl. 2 HW alternate tooth circular saw blades 110mm Z20 Multifunction trimming unit Multifunctional trimming unit flush, radius and radius run-out Incl. diamond milling cutter 57x17 R2.0 mm left and right rotation, diamond-coated fixed tool with CM technology (Leuco system) Shape milling Corner copying unit 0.35 kW Corner copying function up to 3 mm edge thickness, workpiece thickness 12-60 mm incl. diamond-tipped milling tool R2.0 mm incl. automatic lifting device for edge thicknesses over 8 mm Reworking: Radius scraper with two scraper wheels incl. indexable inserts R 2.0 mm Minimum workpiece thickness 12 mm Surface scraper top and bottom insert-controlled incl. 2 blowing nozzles, incl. 2 HW reversible knives. No operating hours counter available, but rarely run and serviced annually by the manufacturer. Available immediately!

more

Listing

Hüllhorst

867 km

Edge banding machine for aluminum edges

Lange B 80 KF-VR mit Fügen+VR Funktion

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure G807oypfm →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 6565debf281c8

more

Auction

Preußisch Oldendorf

855 km

IMA

49 days left

Details

Condition: used, Edge banding machine for aluminum edges, manufacturer: IMA, type: Novimat, consisting of: Item 317: Edge banding machine for aluminum edges, manufacturer: IMA, type: Novimat Concept/I/G80/650/R3, year of construction: 2006, commission no.: 08114, rated power: 36 kW, V-belt profile: 32x20 mm, travel: 8-60 mm, sliding roller chain 20B-1, chain plates 60x80 mm, minimum workpiece dimension: 150x350 mm, maximum workpiece dimension: 600x1.500 mm, consisting of: Insertion table, trimming unit, line level detection, glue application unit, gluing unit- PU premelter, HSK tool holder for high-speed motors, cross-cut unit, trimming unit, radius-fas belt sanding unit, flat scraper, buffing unit, cross-cut sanding unit, light cabinet, temperature controller, machine length approx. 15 m, folding and control unit, roll table in front, pos. 318: edge banding roll table, self-made, consisting of: work table, metal/wood, mobile, with 2 integrated turntables, pos. 319: ball transfer table LIGMATECH ZHR05/L/085, year of construction: 2007, serial no.: 0-305-08-2246, table size approx. 300x200 cm, pos. 320: board return system, consisting of: 2 belt conveyor tables, 1x VENJAKOB, belt width approx. 120 cm, table length approx. 500 cm, 1x LIGMATECH, belt width approx. 80 cm, table length approx. 1.100 cm B9zafy7d2

more

Listing

Wijchen

(dealership location)

725 km

Edge banding machine Edgebander Casadei K30/10

Casadei K30/10

€3,750

Call

Condition: used, Year of construction: 2005, Edgebander Casadei K30/10 Year of construction 2005 Machine No. 3969 Minimum workpiece length 120 mm Minimum workpiece width 75 mm Min/max workpiece thickness 10/45 mm Min/max edge band thickness 0.4/3 mm Speed 7 m/min Total power 3.5kW, 400V Jpejnydo3 Dimensions 2200x800x1300mm (LxWxH), 405kg

more

Listing

D - Nordrhein-Westfalen

856 km

3355 Tempora F 800 60.12

Call

Condition: used, Year of construction: 2019, Second hand machine Edge banding machine Format 4 Tempora F 800 60.12 Video under: Year of manufacture: 2019 MNo: 202.02.046.19 Technical data: Roller support Joining milling left- right rotation Pre-spraying device Edge trimming shear Gluing unit Pressure zone 2 motor cross-cut unit 0 - 15 radius flush chamfering unit 1 motorized corner copying unit Radius scraper unit Grooving unit Surface scraper unit Dbymq0m8c2 Post-spraying unit Buffing unit (polishing unit) without the roller conveyor visible on the pictures Further details on request Availability: from approx. mid-October 2023 Location: Krefeld

more

Listing

LANGE Maschinenbau B 85 KFE - sofort ab Lager lieferbar

Holm

869 km

LANGE Maschinenbau B 85 KFE - sofort ab Lager lieferbar

€37,180

Double-sided edge banding machine

Call

Condition: new, Year of construction: 2023, :0,4-2,0 mm Workingpiece thickness from to:8-50 mm Bokqxuhkiw Total length:3523 mm Feed speed:7 m/min. total power requirement:6,6 kw Weight:710 kg

more

Listing

Barntrup

909 km

WEHRMANN IMA COMBIMA

Call

Condition: new, Year of construction: 2023, Double-sided edge banding machine Wehrmann, type IMA COMBIMA Year of construction: 2024 -Completely overhauled machine with CE certification and warranty - Rolling transport chain with cams - Modern IMA KFA technology - BECKHOFF control system - Available in approx. 6 months As good as new edge banding machine for industrial furniture production. Double-sided longitudinal and cross processing with joining, gluing and reworking of edge material. Automatic complete processing of veneer/plastic strips as roll material from 0.4-3 mm. Program-controlled feed speed between 10 and 40 m/min. Rolling transport chain with cams 40x40mm, pitch 540mm Top pressure with 32 mm wide V-belts for optimum and gentle guidance of components. Gluing and processing units (e.g. IMA cross-cut and KFA technology) BECKHOFF control with modern industrial PC with 21.5" monitor with touch, keyboard and mouse operation Flexible machine equipment (configuration of the units freely selectable). Exemplary equipment per side: - Working width approx. 270 - 2800 mm, with center support and central lubrication - Chain conveyor extension with infeed device - Format part : Joining mills with 2 motors each 4,5KW 400Volt 150Hz 9000U/min FU controlled Double hogger with 2 motors with hydro shafts, 6.6 KW 100Hz 400Volt 6000U/min FU controlled - Gluing section with Hardo 5 KW premelter with adjacent storage tank with 24-fold edge magazine for maximum flexibility for thin and thick edges - Snipping unit 08.042 (processing speed max..30m/min) with 2 motors 200W 400Volt 200Hz FU controlled for cross-cuts flush or with bevel - Multiple profile trimming unit 08.0578 with 2 motors 2x 660 W 400Volt 200Hz FU controlled, max. 30° tiltable Lr0oqa7mlp - Contour trimming unit 08.355 KFA X30 (processing speed max..30m/min) with one motor 500W 400Volt 400Hz 18000 rpm - Finish post-processing: Multiple profile scraper 08.516 with stepper motor axes for horizontal and vertical positioning Flat scraper 08.521 with electronic horizontal positioning Buffing with 2 motors 0.55 KW 50Hz 380 Volt - Grooving unit with one motor 6,6KW 400Volt Completely overhauled machine with CE certification and warranty Other customer-specific equipment variants are possible Delivery time: approx. 6 months

more

Listing

Hüllhorst

867 km

Automatic Banding Machine

Lange B 85 KF mit Fügen

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. Yr7m8c • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 6565debf25d7f

more

Listing

Emskirchen

1,155 km

HIMA BA 30

Call

Condition: used, Machine number: 928511, Automatische Banderoliermaschine - Automatic Banding Machine Lilie 240-30Serial-No. 928511 Beschichtetes Kraftpapier bzw. Kunststoff-Folie Coated paper or plastic film Technical specifications: Leistung / Output: up to 25 Takte/min / cycles/min. Produktbreite / Width of banded product: 30 - 310mm Produkthöhe /Stack height: 3 - 220mm Taktauslösung /Triggering of cycle: – von Hand/Starttaster / manual/start button – über Fußschalter / foot actuator – über Automatiktaster / automatic mode button Abmessungen / Dimensions: 540(L) x 350(W) x 220 (H) mm Elektrischer Anschluß / Power supply: 230 V ~, 50 Hz, 200 W Gewicht / Weight: 32 kg-Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- Gyqpxw -On Stock Emskirchen / Nürnberg - Can be test-

more

Listing

Wijchen

(dealership location)

725 km

Edge banding machine Edgebander Hebrock EURO 2000

Hebrock EURO 2000

Call

Condition: used, Year of construction: 1996, Edgebander Hebrock Euro 2000 Built in 1996 Minimum panel length 250 mm Minimum panel width: 70 mm Ckhlemhcb Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time about 4.5 min Power Requirement: 415 V - 3 Phase - 20 Amp Isolator Compressed air: 7 Bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg

more

Listing

D - Hessen

992 km

EBM KDP 112 SLK

Call

Condition: used, Year of construction: 2001, Second hand machine Used edge banding machine of the company EBM type KDP 112 SLK Cfgodqfxvm year of manufacture: 2001 MNo.: 361 Connected load: 7 kW Crosscut saw unit: electric - pneumatic controlled, motor power 0,37 kW flush trimming unit: radius, straight and chamfer trimming Caps from the roll up to 3 mm Gluing and cross-cut sawing up to 5 mm Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Availability: short term Storage location: Hochheim

more

Listing

Hüllhorst

867 km

Edge banding machine Edgebander Comeva Explorer

Lange B 85 KFE mit Fügen + Eckenkopieren

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness Glvqbsd →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed 6565debf229cd

more

Listing

Wijchen

(dealership location)

725 km

Comeva Explorer Super Plus 4TR+R

Call

Condition: used, Year of construction: 2020, Edgebander Complete machine with milling, gluing (with additional heat lamp), trimming, milling, corner rounding, scraping, brushing, additional unit groove cutter for cabinet ledges. Comeva Explorer Super Plus 4TR+R Year of construction 2020 Lace band thickness 0.4 - 3 mm Workpiece length min/max. 120mm/unlimited Workpiece width min./max. 80mm/unlimited Workpiece thickness 8 - 50 mm Throughput speed 4 - 15 m/min 7snt2zt7fm Dimensions 6670x1115x1665mm (LxWxH), weight 1800 kg

more

Listing

D - Hessen

992 km

Holz-Her Artea 1030

Call

Condition: new, Year of construction: 2023, New machine Year of manufacture 2023 Equipment and technical data: BASIC MACHINE ARTEA 1030 Extendable workpiece support, distance 500 mm Additional rigid workpiece extension arm length 3080 mm Control system Edge Control BC 15 with 15,6" touch screen . (VIsual SEtting mode) LED machine lighting for the machining units FG101 jointing milling unit with 2 diamond milling heads MG101 edge feeder Glue application system Glu Jet GJ101 (2.3 kW, 50 Hz) Storage shaft for 1.4 kg cartridges (4 cartridges) GLU JET collection container Automatic reloading function Cross-cut unit KA101 (50 mm) Pressure unit DW101 chamfering caps 11 Milling unit FR101 Corner copying unit FF101 scraper unit ZK101 Chip catcher box Surface scraper FK101 Buffing unit SW101 Spraying unit TR101 for the infeed and outfeed area Horizontal spraying unit GM101 after printing unit Availability: short term Fb0ufe2vv Storage location: Hochheim

more

Listing

Hüllhorst

867 km

Edge banding machine Edgebander Holz-Her Sprint

Lange B 90 KF mit Fügen

Call

Condition: as good as new (ex-display), Year of construction: 2023, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min • 3 spaces for finishing units • 10“ ColourTouch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with HF motor 0.35 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central Bu8cyege extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Optional finishaggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 6565debf18597

more

Listing

Wijchen

(dealership location)

725 km

Holz-Her Sprint 1321

Call

Condition: used, Year of construction: 2006, Edgebander Holz-Her Sprint 1321 Year of construction 2006 380V C9wlz8m Pre-milling unit (1961), 2x2.0kW, 12000 rpm Multi Glue System (1905), For EVA and PUR adhesives in cartridge and granular form. Pressing Unit (1913), Fitted with a pneumatic guillotine Miter saw unit (1918), 2x 0.35 kW 9000rpm,Tiltable from 0 to 10 degrees Angle milling unit (1942), 2x0.6kW, 18000 Rpm, tiltable from 0 to 15 degrees Radius scraper (1929), max R3 Flat scraper (1964), arranged separately above and below Edge thickness 0.4 - 15 mm Rim height 65 mm Min cutting edge length 350 mm Workpiece width min. 60mm Workpiece length min. 180mm 5500x1000x1700mm (LxWxH), +/- 2500kg

more

Listing

D - Nordrhein-Westfalen

856 km

Edge banding machine Edgebander Hebrock EURO 2000

Biesse Roxyl 4.5

Call

Condition: used, Year of construction: 2009, Second hand machine Year of manufacture 2009 single sided automatic edge banding machine with CNC control 10 " touch-screen Industrial conveyor chain 1"1/4 Joining milling unit FI-502 Glue application unit VC-710 Cross-cut unit IN-801 Flush trimming unit top and bottom RS-100 2 motorized multi-functional trimming unit CR-202 (FAST system with 4 positions standard) scraper unit RBK-503, NC 2 positions I8xftbvsy Flat scraper RCC-701 workpiece thickness 10-65 mm max. workpiece height with form milling unit (depending on profiles) 35-65 mm edge thickness roller 0,4-3 mm edge thickness strip material 0,4-22 mm (depending on aggregate) min. workpiece length 140 mm min. Workpiece width (for length 140 mm) 85 mm min. Workpiece width (for length 250 mm) 50 mm Vorschubgeschwindigkeiten 10-14-18-20 suction connection central 200 mm suction connection for gluing 80 mm suction connection jointing 120 mm Glue container capacity approx. 3 kg Heating time at 1/2 filling approx. 10 min. Length 6000 mm width 1780 mm Height 1770 mm Machine is understood without the workpiece return device shown on the pictures Availability: short term Location:Solingen

more

Listing

Wijchen

(dealership location)

725 km

Hebrock EURO 2000

€4,800

Call

Condition: used, Year of construction: 1999, Edgebander Hebrock Euro 2000 Built in 1999 Minimum panel length 250 mm Minimum panel width: 70 mm Min/max thickness of panel: 10/40 mm Min/max edge thickness: 0.4/5 mm Feed speed: 11 m/min Warm-up time about 4.5 min 70cldgaaj Power Requirement: 415 V - 3 Phase - 20 Amp Isolator Compressed air: 7 Bar Transport dimensions: 3300x1400x1300mm (LxWxH) weight 550kg

more

Listing

D - Nordrhein-Westfalen

856 km

Edge banding machine Edgebander SCM IDM ACTIVA-88

Holz-Her Sprint 1321

Call

Condition: used, Year of construction: 2005, Second hand machine Used edge banding machine from Holz-Her type Sprint 1321 year of construction: 2005 MNo. 282 SPS program control with integrated draw frame control Control panel swivels - at eye level large LCD display all aggregates individually addressable memory for 80 machining programs (arbitrarily expandable via PCMCIA memory cards) automatic operating data acquisition error messages in plain text with error history Equipment and technical data: Joining milling unit 1961 with 2 DIA-equipped milling heads controlled via control system edge infeed 1901 for rolls and strips gluing system 1905 cartridge controlled by sensing nozzle incl. granulate chute with bridge connection Pressure zone 1913 pneumatic and motorized 3-roller Kappagregat 1918 2-motor with pneumatic swivel 10° flush trimming unit 1823 up to 15 mm solid wood Milling harrow 1824 MOT 6 for radius/chamfer milling Radius scraper 1836 MOT 6 Chip catcher box corner copying unit 1983 manual motor change Surface scraper 1964 buffing unit 1944 Spraying unit 1856 front and rear Motorized pressure bridge adjustment workpiece thickness min./max. 6/50 mm glueing thickness max mm: 15 glueing height max mm: 55 Edge length min. 350 mm Thickness of roll material max mm: 3 Workpiece length min mm: 180 Workpiece width min mm: 60 Feed rate 11 m/min. Total length 6300 mm Csvmcsgxzh Operating pressure 6 bar Availability: by arrangement Location: Solingen

more

Listing

Wijchen

(dealership location)

725 km

SCM IDM ACTIVA-88

€7,500

Edge banding machine with joining

Call

Condition: used, Year of construction: 2005, Edgebander SCM IDM ACTIVA-88 Automatic feeding system Speeds 12/18 m./min. Crossing the panel over the chain Standard straight 30 mm With C1+C2, RCS 99/A MULTIPLA, TG 35 mm Panel thickness 10-60 mm Min. panel width 90mm Dimensions 10000x1800x1800mm, weight 3500kg 70df7p0is More information can be found in the attached document. Document not visible? Request it by email.

more

Listing

D - Nordrhein-Westfalen

856 km

Lange Maschinenbau B 80 KF

Call

Condition: new, Year of construction: 2023, Exhibition machine Year of construction: 2023 Equipment and technical data: JOINTING UNIT Two counter-rotating, insert-controlled joining units, the first 1.1 kW and the second 0.75 kW with diamond-tipped spiral jointing cutters ensure clean and tear-free joining of the workpieces before gluing the edge. - Standard tool: ø60 ø20 H30 Z6 AUTOMATIC EDGE FEEDING - Rotating roller table D=600mm for roll material; - Time-controlled, automatic feed allows precise regulation of the edge protrusion and minimizes the consumption of edging material; - Pneumatic pre-cutting shears for roll material up to 2 mm edge thickness; GLUE BASIN - New design with improved thermodynamics, ensures shorter heating times; - Heating power 2.5 kW - Automatic temperature control with electronic stand-by function (prevents the glue from burning if the machine is not used for a long time but is still switched on); - Glue tray with 1.5 kg capacity, completely Teflon-coated; - separate glue roller temperature adjustable PRESSURE ZONE - Pressure zone consisting of a driven pressure roller running synchronously with the glue roller and an adjustable pressure roller with spring tension, for good joint formation of the edge material with the workpiece. - Adjustment of the pressure zone with mechanical SIKO indicator. HIGH-FREQUENCY FLUSH TRIMMING UNIT - Flush trimming unit for the front and rear edge of the workpiece, HF motor 0.27 kW/12000 rpm, automatic scanning on the workpiece Hz9lj9d3 - with suction hood - Tool: Milling head D = 72 x 25 with 4 interchangeable knives HIGH-FREQUENCY COMBINATION MILLING STATION - 2 powerful 0.27 kW, 12,000 rpm. High-frequency motors with HM-WPL special milling cutters, - Suitable for radius and chamfer milling, horizontal and vertical scanning of the workpiece, Unit adjustment equipped with digital counters for adjustment to different edge thicknesses; - Horizontal and vertical tracing bearings for processing high gloss and 3D effect on edges and workpieces; - Tool: router head set ø65x20x20 Z4; CHAIN FEED + PULL-OUT BEAM - Workpiece chain feed - safe guidance of the workpiece by rubberized chain plates, guided by hardened steel guides, driven by a 0.75 kW motor; - Double roller top pressure - Extendable workpiece support rail for large workpieces ; - Pressure beam with central adjustment and SIKO display TOUCHSCREEN - Omron 3.5" color touch screen controls the glue temperature settings, automatic temperature reduction when the machine is not in use, switching on and off of units and error diagnostics; with LED lighting TECHNICAL DATA EDGE MATERIAL: melamine/PVC/ABS/PP/veneer, mm 0.4 ÷ 2.0 mm WORKPIECE DATA: Workpiece thickness, mm 8 ÷ 50 Workpiece length, mm min. approx. 200 Workpiece width, mm min. approx. 75 / min. approx. 60 (optional) MACHINE DATA: Feed speed, m/min 5.5 Joining unit (height of cutters), mm - - 30 (standard) /45/55 (optional) Working pressure, kg/cm2 6 ÷ 7 Total connection, kW 6.1 Electrical connection 400V/50Hz/3Ph+N Dimensions, mm approx 2770x630x1190 Weight approx. kg 670 Incl. special equipment: Vertical rounding of edges (VR function) Radius scraper unit Surface finish

more

Listing

Wijchen

(dealership location)

725 km

Edge banding machine Edgebander IMA

IMA Compact/U/PC/F/DV/6620

€6,500

Edge banding machine with joining and corner copying

Call

Condition: used, Year of construction: 2000, Edgebander Chw0yyjn8g IMA Compact/U/PC/F/DV/6220 Year of construction 2000 Serial number 06645 Panel thickness 45 mm Lace band thickness 20 mm Edge band height 55 mm Min. workpiece length 150 mm Min. workpiece width 60 mm Throughput speed 20 m/min Saw unit Pre-milling unit Milling unit Circular unit Scraper unit Cleaning unit Including return transport Ligmatech ZHR 15 Year of construction 2000 Serial number 0-305-99-0257 Equipped with digital control panel Connection 400 V Manual available Machine weight 3150 kg Including accessories, see photos Set up dimensions 10500x2650x2000mm (LxWxH), weight 3150kg

more

Listing

D - Nordrhein-Westfalen

856 km

Lange Maschinenbau B 85 KFE

Call

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Iarkywqz Workpiece width min. approx. 75 mm workpiece thickness 8 - 50 mm Workpiece length min. approx. 120 mm/180 mm for corner copying edge thickness 0,4 - 2mm chip removal joining aggregta 0 - 2, 0 mm infinitely variable Joining unit with 2 counter-rotating, insert-controlled joining units Diamond tools height = 55 mm direct glue application to the workpiece, glue pot with 1.5 kg capacity EVA/PUR glue basin with discharge function Printing unit Cross-cut unit with HF motor 2 saw blades and high-precision linear guides Combination milling station for radius and chamfer milling Radius scraper unit with blow-off device and suction unit Corner copying unit Surface scraper unit Suction pipe system with 90° bend and hand pusher mounted on the machine Availability: Immediately Location: Solingen

more

Listing

Wijchen

(dealership location)

725 km

Edge banding machine Edgebander Biesse Akron 850

Biesse Akron 850

Call

Condition: used, Year of construction: 2008, Edgebander Te2uzi7n Biesse Akron 850 Year of construction 2008 Minimum panel length 140 mm Minimum panel width: 85 mm Min/max thickness of panel: 10/60 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10/14/20 m/min Compressed air: 7 Bar Power Requirement: 415V - 3 Phase Transport dimensions: 6500x1200x1600mm (LxWxH) weight 1200kg

more

Listing

D - Nordrhein-Westfalen

856 km

Holz-Her Triathlon 360

€2,900

Edge banding machine Edgebander Hebrock - EBM KDP

Call

Condition: used, Year of construction: 1998, Used machine Year of construction: 1998 Equipment and technical data: Machine with PLC control Feed rate 12/16 m/min Edge feeder for roll and strip material, automatic 1901 Glue applicator cartridge 1906 with touch-sensitive nozzle Pneumatic pressure unit, motorized adjustment to edge thickness 1926 2-motor snipping unit, pneumatically swiveling 1918 Rigid trimming unit up to 30 mm 1962 Milling unit MOT 5 with multifunction flush, radius, chamfer 1966 Radius scraper 1927 Corner copying 1983 Surface scraper 1964 Buffing unit 1944 Blowing nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Workpiece width min. 60 mm Workpiece length min. 140 mm Glue thickness max. 13 mm Weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Attention ! Machine is sold on commission ! technical data may have to be verified before purchase ! Location: Goch Bg0lkxfna7v Availability: short term

more

Listing

Wijchen

(dealership location)

725 km

Hebrock - EBM KDP 112 SLK

€3,950

Call

Condition: used, Year of construction: 1999, Edgebander Hebrock EBM EBM KDP 112 SLK Year of construction 1999 Minimum panel length 260 mm Dlz7vv Minimum panel width: 90 mm Min/max thickness of panel: 10/45 mm Min/max edge thickness: 0.4/3 mm Feed speed: 10 m/min 400V, 11.5kW Transport dimensions: 3200x900x1300mm (LxWxH) weight 600kg

more

Listing

D - Hessen

992 km

Edge banding machine Edgebander Kenar FP 250

Lange B 70 K

Call

Condition: used, Year of construction: 2015, Manufacturer: Lange Maschinenbau Type: B 70 K Used machine Condition: very well maintained because little in use Year of construction: 2015 Equipment: Machine table with 13 rollers for better workpiece guidance Edge feed, synchronized with the belt feed Kwg2rqmh29 Edge thickness adjustable via digital counter Pneumatic roller separation with knife (for cutting edges) Three pressure rollers Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick rubber pad to protect the workpiece. Digital counter for height adjustment Direct glue application to the workpiece: glue tray with leak-proof glue supply from below and fast heat-up time after machine standstill Flush trimming unit for the front and rear edges of the workpiece, automatic scanning on the workpiece, pneumatic trimming with knife for cuttable edges Flush trimming unit with vertical scanning and horizontal guidance, reproducible setting by means of digital counters, 2 powerful 0.4 kW high-frequency motors, infinitely variable from 4000 to 18000 rpm, trimming cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction nozzle Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm, Automatic height adjustment of the upper cutter with the belt feed Continuous workpiece support approx. 1800 mm long, workpiece support rail, approx. 300 mm extendable Rotatable foil plate Ø 800 mm Technical details: Workpiece width min. approx. 80 mm Workpiece thickness 10 50 mm Workpiece length min. approx. 220 mm Edge thickness 0.4 2.0 mm Roller cutting max.1.0 x 55 mm, 2 x 45 mm Heating capacity glue pot2.7 kW Electrical connection 400V, 50 Hz , 3Ph + N Total connection 3.8 kW Heating time approx. 10 minutes Pneumatic connection 6 bar Working height approx. 880 mm Dimensions approx. 1800 x 700 x 1300 mm without foil plate Ø 800 Net weight approx. 260 kg Location: Hochheim Availability: Immediately

more

Listing

Wijchen

(dealership location)

725 km

Kenar FP 250

€1,950