Used Barcode for sale (226)

Condition: good (used), Year of construction: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH PRE-MILLING (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 WORKING CAPACITIES: - Panel height to be machined: 8 - 58 mm Thickness 10 to 45 mm when using rounding unit - Panel length for edgebanding: 210 to 2500 mm - Minimum panel width to be machined: 90 to 1100 mm - Edge thickness in coil: 0.4 to 3 mm without rounding max 3 mm with rounding unit - Edge thickness in strips: max 6 mm without rounding max 3 mm with rounding unit - Edge width: panel thickness + 2 mm each side - Feed rate: 11 m/min - Minimum gap between panels: 600 mm - Panel overhang beyond the transfer chain: 30 mm MACHINE CONFIGURATION: - StarTouch control - Prepared for barcode reader - Reel holder table Ø800 mm - Front extension table - Easy size: digital positioning of infeed fence and panel passage height - Anti-adhesive spray unit - Pre-milling unit (RT-V trimmer) 12,000 RPM Podpfx Adsrx S Ipologk - Infrared panel preheating at infeed - Glue application unit (VC-VM) with interchangeable glue pot for granules, capacity: 1 kg. Heating time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure station with 3 rollers (1 roller powered and with timer) - Trimming unit (end cutting) tiltable 0-20° 12,000 RPM - Top/bottom flush trimming unit with digital positioning and copying system. 2 mm radius (or chamfer) router 12,000 RPM - Corner rounding unit R2 mm, 12,000 RPM, digital positioning - Top/bottom R1 & R2 mm radius scrapers with digital positioning - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) OTHER FEATURES: - Pre-milling group motors: 2x2 kW - End trimming motors: 2x 0.19 kW - Lift/lower motor: 0.30 kW - Feed motor: 1.1 kW - Flush trimming group motors (milling): 2x 0.65 kW - CE Marked - Lockable isolator, emergency stop buttons - Power supply: 380 V, three-phase, 50 Hz - Pneumatic supply: 8-10 bar max, dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Spindles: 780 m³/h Edge trimming: 360 m³/h Scrapers: 2x360 m³/h Max. footprint in working order: 10.80 x 2.40 m Dimensions for transport (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tools, manual, spare parts list and diagrams.

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Pgjdpfxexzgw Ao Adlek Width 29.7 in.

Condition: used, This listing is for a Life Technologies Ion Torrent OneTouch 2 with OneTouch ES The Life Technologies Ion OneTouch 2 with Ion OneTouch ES comprises two modules: the Ion OneTouch™ 2 Instrument and the Ion OneTouch™ ES (enrichment system). It simplifies the workflows by providing an automated solution for scalable and reproducible template preparation. It is used for DNA sequencing in healthcare, lab and life sciences. It streamlines the overall Ion semiconductor sequencing workflow, yielding significant time savings and increasing sequencing productivity. The system enables parallel template processing with sample sequencing on the Ion Proton™ or Ion PGM™ sequencers. This reduces the time from sample to sequence to a single day and enables processing of multiple samples per day. The combination of Ion semiconductor sequencing and the Ion OneTouch™ 2 System maximizes the speed of each experiment and minimizes the overall time to completion for each project. The modular design also allows for QC of Ion Sphere™ particles, to maximize experimental control and the success of each experiment. Features: Integrates multiple manual template preparation workflows into a single system Enables parallel processing of multiple samples per day through modular design Supports scalable template preparation for all Ion semiconductor sequencing chips Supports up to 400 bases on the Ion PGM™ System and up to 200 bases on the Ion Proton™ System Includes a full thermal cycling modality for amplification for quick optimization of thermal cycling parameters Employs a peristaltic pump fluidic system that eliminates the need for gas Fits easily on any benchtop with its small instrument footprint Specifications: Weight, OneTouch 2 23 lbs. (10.4 kg.) Weight, OneTouch ES 12 lbs. (5.4 kg.) Dimensions, OneTouch 2 12" W x 16" D x 14" H (30 x 41 x 36 cm) Pgodpfx Aexzg Ubjdlek Dimensions, OneTouch ES 9.5" W x 12.5" D x 11" H (24 x 32 x 28 cm) Operating Humidity 20%-80% (non-condensing) Operating Temperature 15°C-25°C Multiplex Capability Up to 384 barcoded libraries High Throughput Compatibility Automated Protocols, Multiplexing, High Throughput-Compatible Power 100-240 VAC, 50/60 Hz, 5.5 A max

Year of construction: 2018, condition: used, 5-axis machining center with tool changer for aluminum or PVC profiles Max. processing length: 10,500 mm Travel path Y-axis: 1100 mm Travel stroke of Z-axis: 655 mm Swivel angle B-axis: 0° - 90° Angle C-axis: 0° - 360° Max. speed 24,000 rpm. Tool changer with 16 standard tool positions plus saw blade and angle head Central lubrication Many tool holders, including angle head and saw blade (500 mm) minimum quantity spraying Clamp detection and automatic shifting 12 pneumatic material clamps Barcode scanner and label printer Swarf Conveyor made of metal Angle head for machining from below Extraction for cabin Pendulum operation through two light barrier areas Manual control console Spindle hours: about 7500 The loading is included in the price, machine is already dismantled Pedpfsx Up Uajx Adlegk Weight: approx. 14,000 kg

Year of construction: 2019, condition: ready for operation (used), Main Drive Spindle speed range 3500 Table Table load 6500 kg Additional Equipment Shredder for waste Tiltable side pressure rollers in the cross-cutting area Vibration conveyor for waste after longitudinal cutting Tiltable grippers in the longitudinal cutting area FLEXCUT 02 with 2 movable sets and 3 double grippers in each set Label editor with barcode printer capability Pgedpfx Asx D Ngrjdlok Online diagnosis This SCM Gabbiani A3 130 panel saw was manufactured in 2019. It features a longitudinal cutting range of 3200 mm and a cross-cutting range of 2440 mm, with a main saw motor power of 18 kW and a maximum saw blade diameter of 430 mm. The machine supports a maximum panel size of 3200 x 2440 mm and can handle a loading weight up to 6500 kg. Consider the opportunity to buy this SCM Gabbiani A3 130 panel saw. Contact us for more information. Application Types Sawing (Wood)

Condition: used, Year of construction: 2008, offer consists of: - high performance-finisher DocuCutter DC-645 Pgsdpfxox Afare Adlek Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2011, DIRECT FROM PRINTING SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from your side. offer consists of: - high performance-finisher DocuCutter DC-645 Duplo DocuCutter DC-645 high performance-finisher for digital color printing: - feeder: air-suction feeder with lining up - operation: by LCD-display - control: barcode control - PC included - saveable jobs: 80 memories for repeat orders - error avoidance: ultrasonic-doublefeed control eject gate testprogram print mark reader - integrated knives: 6 lengthwise knives + 1 cross knife - size: max. 650x370mm min. 210x210mm - paper weight: 110-350g/qm - loading height: 100mm - creasing each sheet: max. 10 - production speed: max. 1500 sheets/h (A4) max. 720 sheets/h (A3) Pgsdpfeu Sr Szox Adlsk - power: 230V / 50Hz - 0,3kW - dimensions: 2.240x750x1.115mm - weight: 360kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Podpsd Etadjfx Adlsgk Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap

Year of construction: 2014, condition: excellent (used), Automatic Postbox traying system for envelope inserting systems. This SIMA 220 was connected to a Buhrs BB700 inserting systems, therefore it is blue. Installed in 2015 and just in use for 16 months! More pictures available on request! Description: Adjustable in height 600 mm up to 900 mm. Gathering section – with buffer for post boxen Automatic fillingstation for postboxes Automatic change of postboxes. Max 10 Postboxen can be in feeder Touchscreen – simple, and user-friendly user interface Complete with connection from envelope inserter - connection with all inserters possible! Format max.: 180mm x 285mm Format min.: 90mm x 145mm Speed: up to 20.000 envelopes per hour Envelope thickness max.: 8 mm Postbox change-over time: ca. 1,8 sec (max 2000 boxes per hour) Post boxes: Deutsche Post, Postcon, Schweizer Post, Oesterreichische Post, Belgische Post, Hollaendische Post, USPS Trays, Pin Boxen. Electrical connection: 16A, 400/230V, 4kW Pressure air: 6bar, 200l/min Connection: To all inserting systems possible The sima Automatic Mail Delivery lines up with any inserter and automates the presorting and letter tray preparation processes. The delivery checks for open flaps, non-readable addresses, and IMB Barcodes then automatically rejects any letter that should not be delivered. Various reading systems are available for the sima, from simple print mark readers up to a server based OCR/IMB reading system connected to the Digital Front End. Our patented collection unit safely stacks the envelopes individually- without contacting each othermaking twisting or interleaving almost impossible. The envelope stack is quickly pressed before filling the letter trays in accordance with USPS regulations (DMM). The exchange of letter trays occurs automatically with an exchange speed of up to 1,800 boxes/h (2.0 sec). The tray exchange unit can handle MM and EMM letter trays. A unique feature is its ability to intermix one and two foot letter trays depending to the presorting need. As an option, a postcode label printer can be integrated into the sima, which applies a tray label to the letter tray. The filled letter trays are temporarily stored on a large buffer section. The Sequence Repair System (SRS), which marks or separates mails that do not belong to the actual mail sequence, comes standard on this machine. The sima can instruct the operator what to do with the marked or separated mail. This SRS enables a constant production speed even when sequence problems ap Pgoded Etagepfx Adlek

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. Pgjdpfoyq Rkysx Adlsk The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, CEM CEM Smart 5 Turbo Model 907990 Professional Microwave Moisture Analyzer for Moisture and Solids Analysis Reliable Laboratory Analytics in Record Time The CEM Smart 5 Turbo is a state-of-the-art microwave drying system for rapid and precise determination of moisture and solids content in a wide range of samples. Ideally suited for applications in the food, chemical, pharmaceutical, and environmental industries, this device saves significant time while maintaining consistently high measurement accuracy. Product features: Turbo technology with Intellitemp™ – Optimal temperature control prevents burning or crust formation on the sample. Fast analysis times – results within 60–180 seconds High precision – measurement range from 0.1% to 99.9% moisture or solids Versatile – suitable for solids, pastes, sludges, and liquids Pgjdpfxswv Ryys Adlok User-friendly touchscreen operation Interfaces – RS-232, USB, LIMS-compatible Typical applications: Cheese, dairy products, meat Paints, coatings, plastics, polymers Sludges, wastewater, organic residues Creams, pastes, emulsions Technical Data – CEM Smart 5 Turbo Feature Device type: Microwave moisture analyzer / moisture analyzer Technology: Microwave drying with Intellitemp™ temperature control Moisture range: 0.1% – 99.9% Sample types: solids, liquids, pastes, sludges, emulsions Analysis time: typically 1–3 minutes Drying method: direct microwave radiation (non-rotating) Temperature control: automatic (microwave-controlled, no fixed °C value) Weighing unit: Optionally connectable external scale (resolution up to 0.001 g possible) Display / Operation: color touchscreen, intuitive menu navigation Data interfaces: RS-232, USB, network (LIMS-compatible) Documentation: Barcode scanner & thermal printer (optional) Power supply: 230 V / 50–60 Hz Dimensions (W × D × H): approx. 41 × 44 × 37 cm Weight: approx. 18 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and information!) If you have further questions, we will gladly answer them by phone.

Condition: excellent (used), Applied Biosystems ViiA7 Here we offer you an Applied Biosystems ViiA7. Specifications: Block change from instrument front in less than 1 minute; no secondary tooling required. Supported applications Standard curve, comparative CT, genotyping, presence/absence, HRM, melting curve. Temperature uniformity ±0.5 °C, within 30 seconds of reaching temperature set point Run time ~35 min for 96/384-well blocks with Applied Biosystems® Fast Master Mix Supported blocks and volumes 96-well standard (10-100 μl reactions) 96-well Fast (10-30 μl reactions) - 384-well (5-20 μl reactions) TaqMan® Array Micro Fluidic Cards (~1 μl reactions). Detectable sensitivity up to 1 copy - Excitation/detection wavelengths 6 Excitation (450-670 nm). 6 Emission (500-720 nm) - Dynamic Range Up to 9 logs linear dynamic range. Resolution Detect as little as 1.5-fold changes in target quantities in a singleplex reaction 21 CFR p11 Enablement Security, audit, and e-signature features for instrument data Automation Includes plate loading arm with barcode (sales, service, and support provided by Life Technologies) Remote notification Notifies user via email when run is started, stopped or aborted Data export format Fully configurable by user Description: Applied Biosystems Real-time PCR ViiA7. Ideal for performing medium to high throughput real-time PCR. Interchangeable blocks for 96-well, Fast 96-well and 384-well plates as well as TaqMan Array Cards. Fast block change. Touchscreen interface. 2x Ethernet port. 2x USB port. 1x RS 232 connector. 2x connection on the display. Weight: 67 kg Type: Applied Biosystems ViiA7 Pjdpfolat Sisx Adlegk Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 1999, Position scanner, laser, barcode scanner -10-30 V DC -DS2100 -PG220 -Weight: 2 kg Pedob A N T Nopfx Adlegk

Condition: good (used), Position scanner, laser, barcode scanner -Voltage: 230VAC 50Hz 110mA -Sec: 10 V 1000 mA 10 VA -Laser class: 2 -Weight: 2 kg Psdpeb A Sniefx Adlegk

Condition: good (used), Position scanner, laser, barcode scanner -Type: LS50HR3 -Voltage: 4.75-28 VDC Price: per piece Pgedpjb A Spgefx Adljk Quantity: 2 available -Weight: 0.7 kg

Condition: excellent (used), Year of construction: 2017, HOMAG CNC throughfeed drilling machine BHT500 Portal machining center for processing workpieces made of wood or wood-based materials. Podpfox Rt Atex Adljgk - Powercontrol System WoodWOP - 17" TFT display - Vertical drilling units with up to 38 drilling spindles - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X axis - Workpiece dimensions: length 250-2500mm / width 100-1400mm (or 2x 600mm) / thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2017 - Immediately available

Condition: excellent (used), Year of construction: 2013, Maximum saw blade : 400 mm Digital angle display in degrees ( +/- 46 degree ) 2 x pneumatic clamps Hydraulic blade feed Engine size : 1,8 Kw Digital display with touch screen Psdpfoxx Hwwex Adlsgk Hand held barcode scanner 6000 mm infeed with digital pusher 4000 mm manual outfeed with rollers

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 6 W, type of cooling: air, total width: 920 mm, total height: 1,760 mm, total length: 940 mm, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, travel distance Z-axis: 500 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 355 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, UV Fiber Laser 355 nm, 6 W – NEW, SK LASER KOLLTRONIC with Workstation, Made in Germany Laser Source IPG – Made in Germany Laser Safety Class 1 Workstation: - Combined sit/stand workstation with ergonomic legroom - Fully enclosed aluminum profile construction - Front door with laser protection glass for clear visibility - Bright workspace lighting - Dimensions: H 1760 × W 920 × D 940 mm - Work platform: Stainless steel plate with 25 mm hole grid (710 × 400 mm) - Rear service door, screwed for easy part loading - Motorized Z-axis: travel distance 500 mm (focus depending on lens) - Extraction nozzle DN50 (extraction optional) - Safety (PL4) - Emergency stop - Interlock with 2 standard relays - Safety relay for door monitoring UV Fiber Laser: - Wavelength: 355 nm - Power: 6 W 40 kHz - Pulse energy: 20 µJ - Pulse frequency: 10–300 kHz - Air cooled - Pilot laser red light + 2 distance lasers for focus adjustment (Laser class 2) - Laser head manually adjustable in Y-axis Scanner & Optics - F-Theta lens F = 160 mm, anti-reflective protective glass - Marking field: 110 × 110 mm Control: - Windows 11 - 19" TFT monitor, keyboard, mouse - Interfaces: RS232 / Ethernet / USB - KOLLTRONIC marking software: text, logos, QR/Data Matrix, barcodes Operation: - 230 V / 50 Hz - 15–35 °C Pedpfxjyiz Dzs Adlsgk Condition: - New machine - CE compliant · Made in Germany

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, TECHNICAL DETAILS Workpiece length: min. 250 – max. 2500 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 4 mm – max. 80 mm Workpiece stacking: max. 2 pieces Vertical Drilling Unit 2V21 HIGH SPEED 7500 Pjdpfsyg E R Hjx Adlsgk Feed stroke (Z-axis): 60 mm Drilling depth: max. 38 mm Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drive: 2 x 2.7 kW Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 35 mm Spindle distance: 32 mm Spindle type: individually controllable Horizontal Drilling Unit 2H4X/1Y 4 drilling spindles each in X-direction 1 drilling spindle each in Y-direction Drilling depth: max. 38 mm Drilling height (Z-axis): 38 mm from top edge of workpiece Direction of rotation: clockwise/counterclockwise Speed: 1,500 – 7,500 rpm, frequency-controlled Drill chuck: d = 10 mm Total length of drill bit: 70 mm Maximum drill bit diameter: 20 mm Spindle type: individually controllable Grooving Saw Unit N2 X-Y 90° Cutting depth: 30 mm Machining cross-section: max. 70 mm² Speed: 1,500 – 7,500 rpm, frequency-controlled Tool diameter: 125 mm Saw blade thickness: max. 5 mm Milling Unit F2-ETP-6 KW Tool holder: for shaft diameter d = 25 mm Maximum tool diameter: 60 mm Tool clamping length: min. 65 mm / max. 95 mm Maximum tool weight: 2.5 kg Tool change: manual, ETP 25 hydro quick-clamping system Direction of rotation: clockwise/counterclockwise Speed: 6,000 – 18,000 rpm, steplessly programmable Drive: frequency-controlled three-phase motor Max. output at tool: up to 5/6 kW in continuous / intermittent operation (S1/S6-50%) EQUIPMENT Material infeed "IgeL-ROBOT" Lower machining support Upper machining support Vertical drilling unit 2V21 HIGH SPEED 7500 Horizontal drilling unit 2H4X/2Y Grooving saw unit N2 X-Y 90° Milling unit F2-ETP-6 KW Barcode reader Manufacturer: Datalogic

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 350 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 1,200 mm, total height: 1,800 mm, total length: 940 mm, working range: 175 mm, height adjustment type: electric, door opening width: 1,100 mm, door opening height: 700 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Laser Protection Class 1 · Made in Germany · NEW 12-month warranty System & Workstation: - Combined sit/stand workstation, aluminum housing - Fully glazed right-front door, safety glass LK 1 - Bright work light, suction nozzle DN50 - Standard size: H 1760 × W 920 × D 940 mm - Workstation XXL W 1200 × H 1800 × D 940 mm, sliding roof for crane loading, max. 350 kg - Manual sliding door, opening approx. 1100 × 700 mm - Safety equipment: emergency stop, two-channel interlock, Performance Level 4 - Motorized Z-axis, travel range 400 mm, focus dependent on lens Laser: - IPG Ytterbium fiber laser - Output power 20 W, pulse energy 1.0 mJ - Wavelength 1060–1070 nm, pulse duration 100 ns - Pulse frequency 20–80 kHz, air-cooled, power consumption < 400 W - Beam quality M² < 1.2 - Pilot laser + 2 distance lasers, Y-direction manually adjustable Scanner & Control: - F-Theta lens F = 254 mm, marking field 175 × 175 mm - Windows 11 Pro, SSD, 23" monitor, keyboard & mouse - Interfaces: RS232, Ethernet, USB - SK CONTROL software for texts, logos, QR/datamatrix codes, barcodes Work Area & Safety: Pjdpfx Adsyipxasljgk - Magnetic positioning on stainless steel platform 710 × 400 mm, hole grid 25 mm - Operating conditions: 230 V / 50 Hz, 15–35 °C

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, workpiece weight (max.): 150 kg, input voltage: 230 V, type of input current: AC, laser power: 50 W, type of cooling: air, working range: 175 mm, height adjustment type: electric, scan area length: 175 mm, scan area width: 175 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, laser wavelength: 1,070 nm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 110 mm, Equipment: cabin, IPG beam source – Laser class 1 · Made in Germany Workstation – Heavy-duty design: - Sit/stand workstation, aluminum housing, fully enclosed - Front door with laser safety glass, bright work lighting - Stainless steel work platform, 25 mm perforated grid (710 × 400 mm) - Manually movable drawer, precision rails, load capacity up to 150 kg - Extraction nozzle DN50, motorized Z-axis (travel distance 500 mm) - Interlock, emergency stop, safety relay Performance Level 4 Fiber Laser: - Diode-pumped ytterbium fiber laser, 50 W - Pulse energy: 1.0 mJ, pulse duration 100 ns - Wavelength: 1060–1070 nm, pulse frequency 20–200 kHz - Beam quality M² < 1.2 Pedpfx Aeyim S Iedlegk - Air-cooled, power consumption < 400 W - Pilot laser + 2 distance lasers (laser class 2) Scanner & Optics: - F-Theta lens F = 160 mm (marking field 110 × 110 mm) - Optional: F = 254 mm, adjustment range up to table height - X-Y galvo scanner for 1064 nm - Max. scan speed 4 m/s Control & Software: - Industrial PC, Windows 11 - Monitor, keyboard & mouse, monitor arm - KOLLTRONIC marking software: text, logos, QR/DataMatrix, barcodes - Matrix function for batch processing - Easy positioning, focusing, designing, working, coding Additional equipment: - Rotary engraving unit for cylindrical parts up to Ø 60 mm - Controller & software upgrade included Operating conditions: - Power supply: 230 V / 50 Hz - Operating temperature: 15–35 °C Condition: - New machine - CE compliant - Made in Germany

Year of construction: 2026, condition: new, MATRIX55S is suitable for cutting your rebar to the desired length (optional available with Synclone45S, Doublebender). Product information: Pgsdem Tqazjpfx Adlok - Hydraulic Motor: 7,5 kW - Synclone45S is optionally available for double bending - 360° swiveling digital control panel - Barcode system optional available - Total weight: 5200 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Condition: refurbished (used), functionality: fully functional, Uhlmann C 130 Horizontal Cartoning Machine for Ampoules / Blister Packaging Machine - Fully automatic blister strip packaging with simultaneous leaflet insertion - Max. output: 120 cycles/min (depending on product) Format: L= 70 x 150 mm Pgjdpfx Adjyng Ddslek W= 30 x 100 mm H= 15 x 85 mm New hardware and software: Mitsubishi PLC control and 8-inch color touch panel 10-year spare parts availability guarantee Mechanically overhauled Optional accessories: - GUK leaflet folding device (4-fold) - Hotmelt gluing or tuck-in flap - Barcode reading for folding cartons / leaflets - Luminescence control, presence check for leaflets in folding carton - Embossing station - Leaflet pre-insertion - Vacuum pump / Venturi

Condition: good (used), At least 10 Sato SP40 label printers - 203 dpi, thermal printing, USB, fast, compact - used - : Price per unit from location: only €159 (net)! Manufacturer: Sato Type: SP40 Year of manufacture: unknown Print technology: thermal printing (direct) Print resolution: 203 dpi, for razor-sharp and easy-to-read labels Maximum print width: 104 mm, perfect for common label formats Maximum print speed: Up to 152 mm per second for fast print jobs Pgjdpfx Aevx E R Hjdlok Media: Suitable for labels, tags and paper rolls with a width of 25 to 110 mm User-friendly: Easy operation thanks to a clear LCD display and simple button control Compatibility: Supports common label software and a variety of barcodes such as Code 128, EAN, UPC and many more Connections: USB, serial (RS-232) and optional LAN - flexible in integration into your existing system Compact and robust: The space-saving design ensures a long service life and fits into any work environment The Sato SP40 label printer is the perfect choice for anyone looking for a reliable and easy-to-use printer for labels and search for barcodes. With its compact design, it fits into almost any office or work environment and offers fast and precise printing performance. Ideal for small and medium-sized businesses, it helps you efficiently create labels for products, shipping or warehouse management. Condition: good Available: immediately Location: Braunschweig

Year of construction: 2014, condition: ready for operation (used), A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories. Pgjdpfx Aolcdf Djdlok