Used Barier Panel for sale (11,306)

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Hedpfxew Nx A Io Abgjp Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: excellent (used), Panel Saw HOLZKRAFT SI400es - used - Scoring unit, tilt-able, parallel fence with fine adjustment, outrigger table, speed display, angle/miter fence, overhead guard (narrow and wide), automatic brake, dust-tested ----- Technical Data ----- Tilting range: 0-45°, carriage length: 3,200 mm, cutting width: 1,270 mm, cutting height: 130 mm, max. saw blade diameter: 400 mm, scoring saw blade diameter: 120 mm, Hedpsy Dhukjfx Abgsp crosscut fence extendable up to: 3,200 mm, miter fence tilting range: 0-45°, speeds: 3,500/5,000 rpm, motor power: 7 kW, scoring motor power: 0.55 kW, table height: 900 mm, extraction port diameter: 120/80 mm, dimensions (LxWxH): 3,650 x 2,000 x 1,600 mm, weight: 630 kg Quality Information: - Sliding table checked / readjusted - Clearance cuts checked / readjusted - Set to manufacturer's specifications - Brake checked - Complete basic inspection - Complete basic cleaning - Electrics checked - Ready for immediate use

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, Hedey Sazrjpfx Abgop control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Hjdpfsyyzp Hsx Abgsp Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Hsdpfx Abey N Rihjgsp Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: excellent (used), Panel Saw ELCON ADVANCE 215 DSX-A - used - Automatic clamp system for trimming the lower edge, Pneumatically retractable support grid, Sturdy locking positions for the saw carriage at the top and bottom, Electrically monitored locking for vertical cuts, Retractable riving knife for cut-outs, Control panel positioned at eye level, Digital display at the longitudinal stop, Digital display for horizontal cuts, Scoring saw unit with counter-rotation, TRK extraction system, Hedpfsyq Rwyox Abgjp Certified dust extraction, Strip cutting device ----- Technical Data ----- Cutting length: 6,300 mm, Cutting height: 2,100 mm, Edging height: 2,000 mm, Cutting depth: 80 mm, Saw blade Ø: 300 mm, Motor: 4 kW, Extraction port Ø: 200 mm, Compressed air: 6-8 bar, Required space (LxWxH): 7,700x2,000x3,000 mm Quality Information: - Guide rails renewed - Complete basic inspection - Thorough cleaning - Electrical system checked - Immediately ready for operation

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Hsdpfxow Imptj Abgsp Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Condition: new, - Practical clamping system for panels, for trimming the underside and processing without intermediate storage of cut-offs - Comfortable height adjustment of the clamping jaws via control panel - Smooth and ergonomic operation - Modular welded machine frame, torsion-resistant and self-supporting Hsdpfxewnrf Uj Abgsp - Scoring device for tear-free cutting quality - Automatic retraction of slatted frame during sawing - Central workpiece support for maximum flexibility - Easy switching between vertical and horizontal processing - Digital stop gauge - Transport wheels liftable via pedal for easy moving of heavy panels - Durable and precise material support for stable workpiece position - Pneumatic locking of the saw carriage - Large opening for saw blade change Extraction connection: - Extraction nozzle diameter: 100 mm - Extraction air requirement min.: 1800 m³/h - Air speed min.: 20 m/s Equipment: - Lower material support: metal rollers - Retractable slatted frame: automatic - Vertical measurement display: digital - Horizontal measurement display: digital - Panel clamping system - Locking of saw carriage: pneumatic - New exhibition machine -

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Hsdpfxou R Syie Abgop Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: new, Holzkraft L invincibile si 3 BLADE OFF sliding table saw BLADE OFF safety system - exhibition machine- ----- Technical specifications ----- Supply voltage: 400 V, Mains frequency: 50 Hz, Scoring motor power: 1.3 kW, Drive motor power: 9.0 kW, Format sliding table length: 3200 mm, Format sliding table width: 360 mm, Table length: 1040 mm, Table width: 630 mm, Cutting width with parallel stop: 1500 mm, Max. cutting width to the left of the sawblade: 3200 mm, Trimming length: 3200 mm, Sawblade inclination: 90 - 45°, Max. cutting height 90° with 400 mm sawblade: 120 mm, Max. cutting height 45° With 400 mm saw blade: 89 mm, Saw blade speed: 3000 - 5000 rpm, Scoring saw blade diameter: 120 mm, Scoring saw blade speed: 8500 rpm, Length approx.: 7250 mm, Width/Depth approx.: 4460 mm, Height approx.: 1770 mm, Net weight approx.: 1307 kg, Extraction nozzle diameter: 100 and 120 mm The BLADE OFF system detects potential hazardous situations early and prevents them by retracting the saw blade into the machine table in a fraction of a second. With the help of sensors, the system is able to distinguish between the workpiece and the operator. An LED light in the saw blade guard indicates with a green light whether the safety system is active. Controlled via the 15" eye-S control console. Connection to the SCM Thundercut (optimizer/sequence control app) is possible. Three longitudinal stops with integrated digital displays. Electrically adjustable parallel stop. Start/stop buttons for the main and scoring saw blades integrated in the sliding carriage. Special guides and an innovative curved grinding system enable the edger carriage to have a fourfold higher load capacity. Ball-bearing telescopic arm ensures greater stability and smoother workpiece guidance. Equipment Two-axis scoring unit with automatic positioning Anodized aluminum sliding table On/off switch on the sliding table for the main and scoring sawblade motors Trimming frame with angle-adjustable aluminum telescopic stop Material roll on the trimming frame Motorized saw parallel stop via control panel Three longitudinal stops with integrated digital displays Eccentric clamp Control of sawblade height, tilt, and parallel stop Pivoting control panel on top Table extension Table extension Sawblade pendulum protection Hjdpfxev Nhg So Abgep - new exhibition machine -

Condition: used, mileage: 99,900 km, power: 100 kW (135.96 HP), first registration: 05/2017, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Please note: Sales are primarily offered to commercial customers. Internal ID number: [3232] ----Optional extras: * 12–64 months warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery * Financing available, even without a down payment * Trailer hitch / reversing camera can be retrofitted upon request! * Spring special: Upon request and for an additional charge of only €999, the towing capacity can be increased to up to 3,500 kg (vehicle and manufacturer dependent). Hodpozg Staefx Abgop ----Vehicle highlights: * 19% VAT can be shown * Regularly maintained * German vehicle * Immediately ready for use * Euro 6 standard * Accident-free * Automatic transmission * Long wheelbase * Large multimedia display * Cruise control * Trailer hitch * Reversing camera * 3 seats Special equipment: Exterior mirrors, electrically foldable, exterior mirrors, electrically adjustable and heated, both sides, Driving Assistance System: active parking assistant, wooden floor in the cargo area, interior filter: pollen filter, ambient lighting in the passenger/cargo compartment, fuel tank: enlarged, steering wheel (steering column mechanically adjustable), steering wheel with multifunction buttons including trip computer, PTC heater, seats in the cab: co-driver's seat as a double seat, seats in the cab: driver's seat heated, trim in the cargo/passenger compartment: plywood, heat-insulating glazing, two-way speakers at the front Additional equipment: 3rd brake light, adaptive brake lights, airbag on the passenger side, airbag on the driver's side, hill start assist, exterior mirrors, aspherical, both sides, outside temperature display, fastening rails for roof racks, brake assistant, braking system with ABS+ASR, roof light in the cargo area, driving assistance system: attention assist (fatigue detection sensor), driving assistance system: crosswind assist, windshield with antenna, generator 150 A, cup holders at the rear, cup holders at the front, seat belt pretensioners, grab handle on the passenger side, glove compartment lockable, body/superstructure: standard van, body/superstructure: long, cargo area partition, load securing/tie-down points, engine 2.1 L - 100 kW CDI CAT, rear fog lamp, wheelbase 3200 mm, low emission according to emission standard Euro 6, sliding door cargo/passenger compartment on the right, safety belt system with warning system (driver/passenger side), seat cover/upholstery: fabric, trim on window pillars, trim in the cargo/passenger compartment: hard fiber, half-height, lashing rails in the cargo area - side wall to roof frame, service interval display Assyst, permissible total weight 2.80 t ----Would you like to lease or finance? We offer attractive deals – even without a down payment! Please contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon-Fri: 9:00 a.m. – 6:00 p.m. Sat: 9:00 a.m. – 2:00 p.m. ----Note: All information on the internet is non-binding and serves only as a general vehicle description. Errors, typos and prior sale are reserved. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances. Vehicles with a mileage of more than 50,000 km or older than 3 years are preferably sold to our business customers.

Condition: used, mileage: 265,775 km, power: 96 kW (130.52 HP), first registration: 05/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2019, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional options and accessories = - Co-driver's seat - Euro 6 - Driver's airbag - Remote central locking - Cruise control - Wooden cargo bed = Additional information = General information Number of doors: 2 Cab: single License plate: VGB-20-H Technical information Number of cylinders: 4 Engine displacement: 2,290 cc Axle brand: RENAULT MASTER FLEXBOX Front axle: Steered Weights Unladen weight: 2,500 kg Payload: 1,000 kg GVW: 3,500 kg Functional Hedpfey Ukx Hjx Abgep Tail lift: D'HOLLANDIA, tailgate, 750 kg Maintenance APK (technical inspection): valid until 02/2027

Condition: ready for operation (used), Siemens 6AV3617-1JC30-0AX2 / 0P 17-DP12 Operator Panel, serial number: SLBA2000413, like new, 100% functional, scope of supply as shown in the photos. Hedpjzg Schjfx Abgop

Year of construction: 2014, condition: used, Enclosed cargo area/trunk Hsdpfx Abszhva Hsgep Internal dimensions: Length: 7.5 m Width: 2.48 m Height: 2.35 m Plywood box with side door Wooden floor Cevoman bv. Lenskensdijk 5 2200 Herentals Belgium

Condition: used, mileage: 125,953 km, power: 136 kW (184.91 HP), first registration: 09/2021, fuel type: diesel, tire size: 235/65 R16C, axle configuration: 4x2, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: parabolic leaf (spring), number of seats: 3, total length: 5,600 mm, total width: 2,100 mm, total height: 2,700 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, airbag, central locking, cruise control, electric window regulation, fog lights, hill-start assist, navigation system, onboard computer, power assisted steering, soot filter, traction control, = Additional Options and Accessories = - Heated mirrors - Air conditioning - Metallic paint - Particle filter - Radio/CD player - Rain sensor - Rearview camera - Side door - Immobilizer - Xenon headlights = Additional Information = Hedpszhum Eofx Abgep Tire size: 235/65 R16C Brakes: Disc brakes Suspension: Leaf spring suspension Front axle: Steered Unladen weight: 2,157 kg Payload: 1,343 kg GVWR: 3,500 kg APK (Technical Main Inspection): valid until 05.2028 Reference number: 73

Condition: used, mileage: 129,900 km, power: 100 kW (135.96 HP), first registration: 01/2010, fuel type: diesel, overall weight: 3,500 kg, color: green, gearing type: mechanical, emission class: euro5, number of seats: 3, Equipment: ABS, central locking, soot filter, Chat now via WhatsApp: Easily and quickly contact our sales advisor Internal ID number: [3017] Notice for interested parties: Dear customers, please note that we preferably sell our vehicles to commercial operators, dealers, or export customers. ----Optional services that can be booked: * 12–64 months warranty (valid across the EU) * New inspection * New TÜV and emissions test (AU) * Nationwide delivery * Financing available, including zero down payment options ---- * German vehicle * Regularly serviced * Second owner * Long wheelbase * Twin sliding doors * Tow bar * Special equipment: Storage: luggage net on rear wing door, electrically adjustable and heated exterior mirrors, suspension: reinforced rear shock absorbers, rear wing doors with glazing, cargo partition with sliding window, spare wheel in roadworthy condition, extended hinges for rear doors to increase opening angle, sliding door for load/passenger compartment on left, mud flaps front and rear, cabin seating: double passenger bench, driver’s suspension seat, reinforced front stabilizer, high wooden lining in load/passenger compartment * Additional equipment: Storage: tray/compartment, shallow, above windscreen, driver’s airbag, traction control (ASR), grab handle on rear right C-pillar, driver assistance system: brake assist (HBA), body/build: standard panel van, roof variant: standard roof, fuel tank: 75 litres, engine: 2.5 litre – 100 kW TDI DPF, parking light control, wheelbase 3665 mm, low emission according to Euro 5, sliding door for load/passenger compartment on right, seat trim/upholstery: fabric, steel wheels 6.5x16, gross vehicle weight 3.50 t, third brake light ---- Leasing or financing required? We offer attractive options – also possible with zero down payment! Please do not hesitate to contact us. Contact: Telephone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Business hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Notice: All information provided online is non-binding and serves only as a general description of the vehicle. Errors, typographical mistakes, and prior sale reserved. The binding condition of the vehicle is defined exclusively in the purchase contract signed on site or through written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our commercial customers. Hedpfx Abezgq Amegep

Condition: excellent (used), mileage: 370,855 km, power: 55 kW (74.78 HP), first registration: 08/2015, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, number of seats: 2, Year of construction: 2015, BELGIAN REGISTRATION DRIVES VERY WELL = Further Information = Engine displacement: 1,598 cc Unladen weight: 1,358 kg Hsdpfx Abozhnbijgop Payload: 801 kg Gross vehicle weight: 2,159 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: used, “From the production facility of an automotive supplier, technically inspected, fully functional.” Quantity: More than 10 available. Hodpfszh A Nujx Abgsp

Condition: excellent (used), mileage: 173,621 km, power: 70 kW (95.17 HP), first registration: 03/2014, fuel type: diesel, fuel: diesel, color: silver, gearing type: mechanical, number of seats: 2, Year of construction: 2014, BELGIAN REGISTRATION AIR CONDITIONING VERY, VERY CLEAN = More information = Engine displacement: 2,143 cc Unladen weight: 2,270 kg Payload: 730 kg GVWR: 3,000 kg Technical condition: very good Optical condition: very good Hjdpjzhmtdofx Abgop Please contact Thierry Leemans for further information.

Condition: used, mileage: 139,972 km, power: 74 kW (100.61 HP), first registration: 06/2021, fuel type: diesel, axle configuration: 4x2, wheelbase: 2,660 mm, fuel: diesel, CO₂ emissions: 137 g/km, fuel tank capacity: 60 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 4,560 mm, total width: 1,850 mm, total height: 1,870 mm, Year of construction: 2021, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, trailer coupling, General information Number of doors: 5 Model range: May 2018 - Apr 2024 Cab: single Registration number: V-88-NNR Technical information Number of cylinders: 4 Engine capacity: 1.499 cc Measures length/height: L1H1 Weights Empty weight: 1.517 kg Carrying capacity: 658 kg GVW: 2.175 kg Interior Interior: black Consumption Average fuel consumption: 5,1 l/100km (55 MPG) Maintenance, history and condition Service history: Present (serviced by dealer) APK (MOT): tested until 12/2026 Number of keys: 1 (1 hand transmitter) Hsdpfx Absxf Tw Djgjp Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Car kit - Co-driver's bench - Driver's airbag - Electrically operated front windows - Front central armrest - Front fog lights - Heated door mirrors - Heated windscreen - Height adjustable driver's seat - Height adjustable steering wheel - Immobiliser - Loading floor - Multifunctional steering wheel - Panelling - Partition - Radio - Radio with DAB+ - Rear doors - Rear parking sensor - Remote central locking - Sliding side door right - Telephone enabled with Bluetooth

Condition: excellent (used), mileage: 190,897 km, power: 74 kW (100.61 HP), first registration: 10/2010, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, Year of construction: 2010, BELGIAN ADVERTISEMENT AIR CONDITIONING = Further information = Engine displacement: 2,299 cc Unladen weight: 2,360 kg Hsdpfx Aozhimmobgjp Payload: 940 kg GVWR: 3,300 kg Technical condition: very good Optical condition: very good Please contact Thierry Leemans for further information.

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Hsdpfjwqifkox Abgep Availability: short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, “Functionality tested; item originates from the dismantling of equipment at an automotive supplier.” Quantity: 8 available Manufacturer: TRUMPF Type: Panel Computer Multitouch E741095 Display: 10.4″ (1024 × 768 px) CPU: AMD GX-415GA SoC, 4-Core, Radeon HD Graphics Hjdpfx Ajzhn Ddebgop Ports: COM, DVI, 2× USB, 2× LAN Weight: approx. 2.0 kg

Condition: used, Used Siemens SIMATIC OP37 operator panel for industrial machine and system control. Manufacturer: Siemens Model: 6AV3 637-1LL00-0AX1 MLFB: 6AV3637-1LL00-0AX1 Series: SIMATIC HMI Device Type: Operator Panel OP37 Display Type: LC color display STN Processor: Pentium 100 MHz Working Memory: 8 MB RAM Interfaces: 2x TTY, 2x RS232, 1x RS422, 1x RS485 RS485 Transmission Rate: up to 12 Mbit/s Front Panel Protection: IP65 Rear Panel Protection: IP20 Memory Card Slot: PC Card Application Area: Machine operation and process visualization Condition: Used Hodpfxezhn Aas Abgep

Condition: used, mileage: 50 km, power: 107 kW (145.48 HP), first registration: 06/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, fuel tank capacity: 80 l, color: white, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, = Additional Options and Accessories = - Armrest - Co-driver's seat - Third brake light - Electric front windows - Driver's airbag - Remote central locking - Height-adjustable steering wheel - Radio = Notes = Dhollandia DHLM tailgate, 750 kg Cruise control Air conditioning Co-driver's seat Bluetooth Armrest = Further Information = General Information Number of doors: 2 Model range: June 2019 - Apr. 2024 Cab: single License plate: V-52-PNP Technical Information Torque: 360 Nm Number of cylinders: 4 Engine displacement: 2,298 cc Weights Unladen weight: 2,541 kg Payload: 959 kg GVW: 3,500 kg Functional Tail lift: Dhollandia DHLM, rear tailgate, 750 kg Hedpfx Abszhl Aqjgsp Interior Interior: grey Consumption Average fuel consumption: 12.8 l/100km Maintenance APK (Technical Inspection): valid until 06.2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL